Related
Hi,
I am new to this site and fairly new to rooting and stuff and need assistance with my Sony Xperia S (LT26i). If i am not in the right pace for this please point me in the right direction. I have installed a custom rom and custom recovery which let me upgrade from 4.1.2 to 4.3 which was working fine then when I flashed a different custom rom after that to get 4.4.1 I lost access to my custom recovery. The main issue is that I need help with changing the custom rom I have installed, for some reason I can no longer boot into TWRP or CWM (using power + vol up), the phone simply boots normally and skips the whole process therefore I cannot flash anything. I have looked for hours over the net on how to get into recovery but could not find a solution.
I also assumed that when installing custom recovery and custom roms that you would need to be rooted but when I check with Root Checker it says that I am not. So any assistance would be great
Bizzmagizz said:
Hi,
I am new to this site and fairly new to rooting and stuff and need assistance with my Sony Xperia S (LT26i). If i am not in the right pace for this please point me in the right direction. I have installed a custom rom and custom recovery which let me upgrade from 4.1.2 to 4.3 which was working fine then when I flashed a different custom rom after that to get 4.4.1 I lost access to my custom recovery. The main issue is that I need help with changing the custom rom I have installed, for some reason I can no longer boot into TWRP or CWM (using power + vol up), the phone simply boots normally and skips the whole process therefore I cannot flash anything. I have looked for hours over the net on how to get into recovery but could not find a solution.
I also assumed that when installing custom recovery and custom roms that you would need to be rooted but when I check with Root Checker it says that I am not. So any assistance would be great
Click to expand...
Click to collapse
try to root again or if it wont work, back to stock and start from begining
Paget96 said:
try to root again or if it wont work, back to stock and start from begining
Click to expand...
Click to collapse
Thanks for the feedback, because I am quite new to this stuff can you tell me what the best and easiest way to root the phone is? I have tried the root toolkit but it wont work with my rom i have atm. I cant access my recovery either so how would I go about getting back to stock rom?
Bizzmagizz said:
Thanks for the feedback, because I am quite new to this stuff can you tell me what the best and easiest way to root the phone is? I have tried the root toolkit but it wont work with my rom i have atm. I cant access my recovery either so how would I go about getting back to stock rom?
Click to expand...
Click to collapse
you have all here
follow this,and back to stock, then root again, install cwm or twrp recovery, and install what ever you want
http://xperiafirmware.com/8-firmware/13-sony-xperia-s-lt26
Do you know of any other site where I can get the firmware from?, when I try and extract the file after I download it it's corrupted. I have tried multiple times with no luck.
Bizzmagizz said:
Do you know of any other site where I can get the firmware from?, when I try and extract the file after I download it it's corrupted. I have tried multiple times with no luck.
Click to expand...
Click to collapse
witch android do you want?
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
Here is 4.0.4
https://docs.google.com/file/d/0B_d8uWGbkaetLThpYzEwZUh5aTg/edit
steps:
how to install the newest Android 4.0.4 for Sony XPERIA S LT26i
a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial)
b) download and install latest Flashtool from here (mirrors Google Drive or Mega)
c) download also latest Android 4.0.4 (mirror) for Sony XPERIA S LT26i
d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
g) after few minutes all is done and your phone gets the new firmware
Here you got 3 ways to update good luck
http://androidteen.com/xperia-s-lt26i-update-to-android-4-1-2-jelly-bean-official-firmware-6-2-b-1-96/
Ok so I successfully downloaded the firmware file but I got an error when using the flash tool, I have attached the log if you can maybe help me out with what went wrong.
Bizzmagizz said:
Ok so I successfully downloaded the firmware file but I got an error when using the flash tool, I have attached the log if you can maybe help me out with what went wrong.
Click to expand...
Click to collapse
The clue's in the error message - you don't have the required drivers installed.
There's a directory named "drivers" under the main flashtool dir. Run flashtool-drivers.exe and install the appropriate drivers. I think "Common Drivers Viskan Board" is the one you need. I ended up installing all of them to get it to flash (which took ages).
Ok so I got it to work, all I had to do was hold down the vulumn down button for like an extra 5 seconds while it began to flash
Thanks for the help, I appreciate it
Bizzmagizz said:
Ok so I got it to work, all I had to do was hold down the vulumn down button for like an extra 5 seconds while it began to flash
Thanks for the help, I appreciate it
Click to expand...
Click to collapse
work??
dont forget to press thanks
Hello again
So I have successfully rooted the device and installed TWRP but as before I cannot seem to get into the recovery mode, when I boot the phone with "power and vol +" it doesn't boot into recovery but instead there is a quick glimpse of what I think is the recovery mode (I cant actually see it but something happens for a split second) but it flashes past way too fast then goes to the normal Sony logo and continues booting normally. I have tried this like at least 20 times in the last 2 weeks and have researched other ways to boot into recovery but I can't seem to find anyone with an answer. Do you know what could fix this? Or is there a way to boot into recovery using a computer?
Bizzmagizz said:
Hello again
So I have successfully rooted the device and installed TWRP but as before I cannot seem to get into the recovery mode, when I boot the phone with "power and vol +" it doesn't boot into recovery but instead there is a quick glimpse of what I think is the recovery mode (I cant actually see it but something happens for a split second) but it flashes past way too fast then goes to the normal Sony logo and continues booting normally. I have tried this like at least 20 times in the last 2 weeks and have researched other ways to boot into recovery but I can't seem to find anyone with an answer. Do you know what could fix this? Or is there a way to boot into recovery using a computer?
Click to expand...
Click to collapse
use this to reboot into recovery
ang go to reply, because I dont see you post
https://play.google.com/store/apps/details?id=pl.qbanin.reboot
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
rspilot1 said:
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
Click to expand...
Click to collapse
Hi. What recovery are you using?
If you haven't installed a custom recovery, then that explains your issue. Basically, the app scheduled a custom recovery script which kept failing in the stock recovery. You should normally be able to reboot into the system holding the power button, thus skipping going to recovery. This also resets the recovery script so everything is back to normal.
Nandroid is normally only possible using a custom recovery like TWRP or CWM.
I saw that you might be able to perform a Nandroid without restarting the phone (so without a custom recovery) using this app: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup&hl=en
I have never tried it. Looks promising though.
But please note that you won't be able to restore the backup without a custom recovery.
EDIT: If you do have a custom recovery, why not boot in recovery mode and make the backup from there?
Cheers
Recovery Boot Loop Problem
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
rspilot1 said:
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
Click to expand...
Click to collapse
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Click to expand...
Click to collapse
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
rspilot1 said:
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
Click to expand...
Click to collapse
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Click to expand...
Click to collapse
Thank you, that answered some questions.
you've been a great help.
Recovery Boot Loop Problem
rspilot1 said:
Thank you, that answered some questions.
you've been a great help.
Click to expand...
Click to collapse
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
rspilot1 said:
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
Click to expand...
Click to collapse
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Recovery Boot Loop Problem
andreiav said:
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Click to expand...
Click to collapse
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Recovery Boot Loop Problem
rspilot1 said:
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Click to expand...
Click to collapse
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
rspilot1 said:
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
Click to expand...
Click to collapse
Yep. 5 minutes process at most
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Yep. 5 minutes process at most
Sent from my GT-I9505
Click to expand...
Click to collapse
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
rspilot1 said:
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
Click to expand...
Click to collapse
Awesome! Really glad it worked.
Cheers!
Sent from my GT-I9505
Hi guys I rooted my Z3 and installed TWRP so i could install a custom rom. So I downloaded the ROM, booted to TWRP, wiped everything, then installed the ROM. It said everything was successful so I rebooted my phone. Now there is a black screen. When I hold the power button, the phone vibrates for a second but nothing happens. When I plug my phone in, there is a red flashing light. What do I do?? Please help me.
shspeed said:
Hi guys I rooted my Z3 and installed TWRP so i could install a custom rom. So I downloaded the ROM, booted to TWRP, wiped everything, then installed the ROM. It said everything was successful so I rebooted my phone. Now there is a black screen. When I hold the power button, the phone vibrates for a second but nothing happens. When I plug my phone in, there is a red flashing light. What do I do?? Please help me.
Click to expand...
Click to collapse
which custom rom? And have you unlocked the bootloader?
gregbradley said:
which custom rom? And have you unlocked the bootloader?
Click to expand...
Click to collapse
It was the Validus ROM. I didnt unlock the bootloader. I feel like an idiot right now. Is there any way to fix this?
shspeed said:
It was the Validus ROM. I didnt unlock the bootloader. I feel like an idiot right now. Is there any way to fix this?
Click to expand...
Click to collapse
That has a custom kernel so you need to unlock the bootloader to flash it.
To repair it you can restore the backup you must have taken in recovery before flashing the rom
or
Flash a stock FTF in flashtool from flashtool.net
or
Force a software repair using PCCompanion.
gregbradley said:
That has a custom kernel so you need to unlock the bootloader to flash it.
To repair it you can restore the backup you must have taken in recovery before flashing the rom
or
Flash a stock FTF in flashtool from flashtool.net
or
Force a software repair using PCCompanion.
Click to expand...
Click to collapse
Ok thanks. How would i be able to restore the backup if i cant get into recovery?
shspeed said:
Ok thanks. How would i be able to restore the backup if i cant get into recovery?
Click to expand...
Click to collapse
The custom kernel should have recovery in it (Probably) so you can try entering by pressing the volume up or down button when you reboot the phone.
EDIT, my mistake, the kernel is not booting.
Flash a stock FTF ending in .93, root, install recovery and restore the backup
or
Force a software repair using PCCompanion, downgrade, root, install recovery, restore backup
gregbradley said:
The custom kernel should have recovery in it (Probably) so you can try entering by pressing the volume up or down button when you reboot the phone.
EDIT, my mistake, the kernel is not booting.
Flash a stock FTF ending in .93, root, install recovery and restore the backup
or
Force a software repair using PCCompanion, downgrade, root, install recovery, restore backup
Click to expand...
Click to collapse
OK im in flashtool but when i plug my phone in to flash, it asks for drivers, but I have all the drivers installed. What should I do? http://gyazo.com/29bbe3a0b82d333acc8efe03be4275c5
goto C:\flashtool\drivers
run drivers.exe
choose Z3, fastboot and flashmode drivers
restart PC and try again.
Also, it would help if you show the whole log from flashtool.....
gregbradley said:
goto C:\flashtool\drivers
run drivers.exe
choose Z3, fastboot and flashmode drivers
restart PC and try again.
Also, it would help if you show the whole log from flashtool.....
Click to expand...
Click to collapse
OK, so I updated flashtool, got all the drivers, then restarted my pc and flashed and it worked. Now I will re root and try again. Thank you so much for helping me out with this. If there is anything I can do to for you, let me know. I appreciate the time that you set out from your day to help.
Hey, I rooted my S6 edge (I believe just using the CF autoroot ROM, if my terminology is correct, I'm not too well versed here) and installed a custom recovery menu (TWRP 3.0) a few months ago and everything was working fine.
Today I decided that I wanted to wipe my phone, and I quickly googled to see if a factory reset from the settings app would play well with a rooted phone, and it said it would, it lied. Now my phone is rebooting only into the TWRP menu. I don't know what to do to fix it.
I've tried reloading the back up I made when I installed TWRP, it restores successfully but when rebooting it crashes. I have to reboot using Power+VolDown+Home. I also tried to just reinstall the ROM (assuming that going to Reboot - Download would be the same as using the stock recovery menu) but it also crashes so I don't think ODIN can detect it, the phone does however get recognised by my computer
I'm completely lost on what to do now, as I'm rather new to this, so any help would be appreciated!
thefomaster said:
Hey, I rooted my S6 edge (I believe just using the CF autoroot ROM, if my terminology is correct, I'm not too well versed here) and installed a custom recovery menu (TWRP 3.0) a few months ago and everything was working fine.
Today I decided that I wanted to wipe my phone, and I quickly googled to see if a factory reset from the settings app would play well with a rooted phone, and it said it would, it lied. Now my phone is rebooting only into the TWRP menu. I don't know what to do to fix it.
I've tried reloading the back up I made when I installed TWRP, it restores successfully but when rebooting it crashes. I have to reboot using Power+VolDown+Home. I also tried to just reinstall the ROM (assuming that going to Reboot - Download would be the same as using the stock recovery menu) but it also crashes so I don't think ODIN can detect it, the phone does however get recognised by my computer
I'm completely lost on what to do now, as I'm rather new to this, so any help would be appreciated!
Click to expand...
Click to collapse
Probably need to reflash stock firmware. Then reflash twrp if you want to.
Sent from my SM-G925F
Press volume down and power button after so 10 sec it will not reboot in first time try and try
If this dont work jst copy super su file and update it in trwp it will auto reboot. Try this hope this will work if works thn hit thanks button
Rosli59564 said:
Probably need to reflash stock firmware. Then reflash twrp if you want to.
Sent from my SM-G925F
Click to expand...
Click to collapse
yash_.shah said:
Press volume down and power button after so 10 sec it will not reboot in first time try and try
If this dont work jst copy super su file and update it in trwp it will auto reboot. Try this hope this will work if works thn hit thanks button
Click to expand...
Click to collapse
Thank you both for replying. I couldn't get it too turn off, however I did manage to install a custom ROM through TWRP itself. I think I've just installed TWRP wrong, so thats why it was crashing, so I'll update and reinstall when I'm next at home to see if that stops it crashing. Everything seems to be working now though, so thanks!
Hi,
I have S8 Plus SM-G955F in Germany.
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery. However, it does not enter into recovery and reboots after few seconds into "installing updates" mode which then fails.
It does not boot up into Android.
All I can access to is Download Mode.
I flashed "BL_G955FXXU1AQF7_CL11544126_QB13847503_REV00_user_low_ship.tar" Bootloader and rebooted and now it is stuck in Samsung boot logo. If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
I now downloaded following stock firmware through SamFirm: "SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
but when trying to flash it in odin I get FAILED !!! Also if I try to flash TWRP recovery "twrp-3.1.0-1-dream2lte.img" I get FAILED in Odin I now also tried to flash "AP_G955FXXU1AQH3_CL12050265_QB14545623_REV00" firmware using this tutorial: https://www.youtube.com/watch?v=2y0ZZxcNVnE which also FAILED. I think I am completely bricked !!
Please help, phone is completeley useless now
Thanks!
tobyffm said:
SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
Click to expand...
Click to collapse
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Maltonator said:
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Click to expand...
Click to collapse
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
tobyffm said:
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
Click to expand...
Click to collapse
But you flashed all four files at the same run together?
Maltonator said:
But you flashed all four files at the same run together?
Click to expand...
Click to collapse
Yes, like the howto video described.
tobyffm said:
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery.
Click to expand...
Click to collapse
But this happens with my phone to if I press volume up.
tobyffm said:
If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
Click to expand...
Click to collapse
But you have to press Vol down
Maltonator said:
But this happens with my phone to if I press volume up.
But you have to press Vol down
Click to expand...
Click to collapse
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
tobyffm said:
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Click to expand...
Click to collapse
But why do you boot in recovery mode?
tobyffm said:
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
Click to expand...
Click to collapse
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Maltonator said:
But why do you boot in recovery mode?
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Click to expand...
Click to collapse
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
tobyffm said:
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Maltonator said:
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Click to expand...
Click to collapse
Did already, did not help. I think maybe there is something realldy bricked, so flashing stock firmware wont be possible at all anymore?! Is this possible somehow?
btw: Just managed to load into TWRP, randomly it does load twrp, dont know how, because if I press the keys for loading into recovery, it actually does not do anything, but currently I see twrp.
Is see anything I can try from there? btw: formated data (incl. internal storage) earlier already, but it did not change anything.
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
tobyffm said:
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
Click to expand...
Click to collapse
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Maltonator said:
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Click to expand...
Click to collapse
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
tobyffm said:
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
Click to expand...
Click to collapse
Glad it worked! :good:
tobyffm said:
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
My mistake, sorry - I posted in the wrong place- sorry. (I do hope you find a way to get t his fixed) good luck
I just ran into this thread: https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
It looks like you're not the only one...
You know, you might want to try and remove the more current apps you installed and see if that is causing the loop, and if that does not work, just dirty flash over what you have. For me, a lot of time a dirty flash will solve the issue, as it overwrites the OEM software, and in that manner, takes my phone OS back to normal/new state, while leaving my data.