THIS GUIDE IS TESTED WORKING ON CYANOGENMOD 12 WITH THEME ENGINE ONLY.
Please do not post that this isn't working for you unless you have a ROM which has the CyanogenMod 12 theme engine installed.
It should theoretically work on all ROMs based off CM12 like CyanogenMod 12, GearCM12, AICP, Vanir, BlissPop, CyanideL, Candy5, Euphoria, Temasek, Resurrection Remix, Screw'd, Validus, Team UB, Dirty Unicorns and more!
Thanks to @eagleeyetom for the feature on 28th January, 2015!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEWS! A DEV HAS CREATED AN APP FOR THIS WITH ADDED FUNCTIONALITY! READ ON FOR MORE INFO!
I noticed a lot of posts on the threads of almost all ROMs based off of CyanogenMod 12 asking about how to change the lockscreen wallpaper without using an apk or anything in the theme engine. So I did some experimentation and have found a way to do it, and I'm gonna share it with you.
Please follow this carefully step by step or this may not work for you. If you ARE on a ROM based off of CyanogenMod 12, and you did these steps correctly and it still didn't work (I don't see why it wouldn't), post your device information and ROM details and I'll look into it.
Let's get started.
Things you'll need:
1. A ROM based off of CM12 (duh)
2. Root access.
3. A root file explorer.
I would recommend reading the F.A.Q. before you do this!
Here's a video tutorial I made to make things easier to understand:
Here are the steps:
Download/place the wallpaper you need in your internal/external storage and remember it's location.
Download, install and open a root file browser. (ES File Explorer recommended)
Grant the file explorer root access.
Go into the root directory and then go to data/system/users/0.
Here, rename the "keyguard_wallpaper" to "keyguard_wallpaperOLD" to keep it as a backup.
Now navigate to where you saved your new wallpaper, and rename it to "keyguard_wallpaper" REMEMBER TO REMOVE THE FILE EXTENSION.
Now move this file to the location mentioned above (data/system/users/0/).
Change permissions to -rwx------ Different ROMs might require different permissions. See Q6 of the F.A.Q.!
Lock the phone now, and enjoy your new wallpaper.
UPDATE
A fellow XDA Member, @Miniprepumen, has created a simple and amazing app built to do what this guide says!
He's also added some features like built-in resizing, and more features are on the way. So if you want to do this the easy way, head on over to his thread, check out the app and leave a thanks! And if you can, donate to him for his efforts to motivate him further. Click HERE to go there!
F.A.Q.
Q1: How do I revert to the old wallpaper?
A: Simple. Just delete the new one, and rename the backed-up wallpaper.
Q2: Will this work on ROMs other than the ones based off of CM12?
A: I do not know. I've only tested this on Resurrection Remix 5.3.1 which is based off of CM12 on a S4 GT-i9500. Give it a shot, and if it worked, let me know so I can update the OP.
Q3: Will this cause any bricks or bootloops if I mis-rename the files?
A: Absolutely no. It shouldn't. Never bricked mine. It just displays the last known wallpaper I think.
Q4: What happens if I just rename the existing one and don't replace it with anything?
A: The default wallpaper (the one you use for your home screen) should be displayed. (This is based on user reports)
Q5: There is no "keyguard_wallpaper" in the directory you mentioned.
A: Just paste the new renamed file, set permissions, and it will work.
Q6: Did everything. Wallpaper doesn't change.
A: Please try other permissions. Some users reported that they had to grant permissions to the system to make it stick on reboot. Granting all the users all the permissions would be your last resort.
Q7: Still doesn't work!
A: Please make sure you did everything correctly. Watch the video for more help. If even after you've verified that you've set the permissions right, renamed it properly, removed the extensions, then try doing a reboot. If it still doesn't work, then it means your ROM just doesn't support it. Ask the dev for help.
Q8: Can I have a live wallpaper?
A: Yes and no. So far, I have not figured out a way to set a live wallpaper for lockscreen and the home screen separately. Only way it is currently possible to have a live wallpaper for your lockscreen (afaik), is to have it for both your locks creen and the home screen. If you're okay with that, then simply set the live wallpaper as your home screen wallpaper, and then delete the "keyguard_wallpaper" file. It's kinda like Q4.
Watch the video if the steps seem complicated to you. If you're gonna tell other people about this, please link back to this thread.
Enjoy your new CM12 lockscreen wallpaper. :good:
Works on temasek cm12 i9300:good:
Thanks. OP updated.
voorhees13 said:
Works on temasek cm12 i9300:good:
Click to expand...
Click to collapse
works on crDroid (cm-based, too). Thank you
Works with Note 2 i605 Liquid Smooth CM12
There is no "keyguard_wallpaper" in "data/system/users/0" on JustArchi's UNOFFICIALCyanogenMod 12 for i9300
Works on Temasek rom.
Naveed Abbas said:
There is no "keyguard_wallpaper" in "data/system/users/0" on JustArchi's UNOFFICIALCyanogenMod 12 for i9300
Click to expand...
Click to collapse
There is no such file in OPO CM12 too, but if you paste the image there, rename and set permissions, it will work.
Naveed Abbas said:
There is no "keyguard_wallpaper" in "data/system/users/0" on JustArchi's UNOFFICIALCyanogenMod 12 for i9300
Click to expand...
Click to collapse
+1 No file named "keyguard_wallpaper" on nightlies for Nexus 5
Works with LG G3 D855 CM12 , but also need to change own & group to "System" otherwise not work.
tobiascuypers said:
+1 No file named "keyguard_wallpaper" on nightlies for Nexus 5
Click to expand...
Click to collapse
gasparzim said:
There is no such file in OPO CM12 too, but if you paste the image there, rename and set permissions, it will work.
Click to expand...
Click to collapse
Naveed Abbas said:
There is no "keyguard_wallpaper" in "data/system/users/0" on JustArchi's UNOFFICIALCyanogenMod 12 for i9300
Click to expand...
Click to collapse
Did you guys even set a separate lockscreen wallpaper from the Themes app?
I just rename keyguard_wallpaper to "keyguard_wallpaperOLD and nothing else and finally i have my own wallpaper
gasparzim said:
There is no such file in OPO CM12 too, but if you paste the image there, rename and set permissions, it will work.
Click to expand...
Click to collapse
Yes Renamed "keyguard_wallpaper" and pasted in "data/system/users/0" on JustArchi's UNOFFICIALCyanogenMod 12 for i9300
and it works fine.........confirmed.......:good:
Awesome. Hopefully this is implemented into the ROM soon.
gasparzim said:
There is no such file in OPO CM12 too, but if you paste the image there, rename and set permissions, it will work.
Click to expand...
Click to collapse
Are these the right permissions?
as it's not working on my CM12 ROM
Worked great
roel1976 said:
Are these the right permissions?
as it's not working on my CM12 ROM
Click to expand...
Click to collapse
These permissions you have to set...!!!
Another reason why I don't upgrade to CM12 yet... You need special workarounds even to change the lockscreen wallpaper. How basic is that?
I wouldn't expect further customisation options anytime soon, and disappointment is big enough.
Grand Duos GT I9082
Thanks for your Help Friend :good:
Works on Grand Duos GT I9082
Not to seem off topic, but why isn't this feature put into the ROM?
Related
OmniROM: Aim to be perfect, idea beyond perfect, implementation approaching perfect!
This is what I feel!
Don't want to mess up the Omni forum so I post here.
Edit: Patches need to keep up with the platfrom. Will try to upate every 2 weeks.
Multi-Window is a preliminary feature of OmniROM. The official builds haven't included yet.
I did the cherry pick it in my OmniROM Homemake build for GT-7.7. Then I pack the necessary files to a patch.
It works for my Nexus 7 and Nexus 4 too!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The commit message from the owner Guillaume Lesniak :good:
[WIP] Multi-window
This is a big work in progress, which currently has some bugs, but begins to look okay.
You can already multitask a little bit, by using the app switcher and long-pressing an icon,
then select "Add to Split View". Last window touched gets the key focus.
Code is very ugly, I know. Don't merge it, don't use it for now. Unless you want to make your code ugly.
Enjoy
Click to expand...
Click to collapse
Even though it is in the early stage, it is not that ugly and worth trying.
How to patch?
Before you want to try, I suggest you do a bakcup.
Then prepare a revert file first:
1. Make a copy of the attached zip file
2. rename it to say "revert-Multiwindow.zip"
3. open the renamed file and your OmniROM zip side by side with 7z
4. Copy the corresponding file from the ROM zip to the revert zip (in system/framework and system/priv-app folders)
5. Now you have a revert zip which can restore to original.
Flash the attached zip in recovery and enjoy! It work for OmniROM 4.4.2. Flash the revert zip if you don't want it.
I hope it works for your device too! Please report if you have a success or failure. Cheers!
Download links:
2014/1/23 (patch 20)
AndroidFileHost, goo.im, Mega
2013/12/12 (patch 16)
AndroidFileHost, goo.im, Mega
2013/12/22 (patch 14)
AndroidFileHost, goo.im, Mega
Working devices:
GalaxyTab 7.7
GalaxyTab Plus
Nexus 7 (tilapia) with Official build
Nexus 4 with Official build
Nexus 5
jfltexx (i9500, S4)
Galaxy S2
i9300
daniel_hk said:
OmniROM: Aim to be perfect, idea beyond perfect, implementation appraching perfect!
This is what I feel!
Don't want to mess up the Omni forum so I post here.
Multi-Window is a preliminary feature of OmniROM. The official builds haven't included yet.
I did the cherry pick it in my OmniROM Homemake build for GT-7.7. Then I pack the necessary files to a patch.
It works for my Nexus 7 and Nexus 4 too!
View attachment 2451898 View attachment 2451899
The commit message from the owner Guillaume Lesniak :good:
Even though it is in the early stage, it is not that ugly and worth trying.
How to patch?
Before you want to try, I suggest you do a bakcup.
Then prepare a revert file first:
1. Make a copy of the attached zip file
2. rename it to say "revert-Multiwindow.zip"
3. open the renamed file and your OmniROM zip side by side with 7z
4. Copy the corresponding file from the ROM zip to the revert zip (in system/framework and system/priv-app folders)
5. Now you have a revert zip which can restore to original.
Flash the attached zip in recovery and enjoy! It work for both OmniROM 4.4.1 and 4.4.2. Flash the revert zip if you don't want it.
I hope it works for your device too! Please report if you have a success or failure. Cheers!
Download links:
AndroidFileHost, goo.im, Mega
Working devices:
GalaxyTab 7.7
GalaxyTab Plus
Nexus 7 (tilapia) with Official build
Nexus 4 with Official build
Click to expand...
Click to collapse
Just to let you know this will break HALO if your rom is not using halo it's okay then
phoenixita said:
Just to let you know this will break HALO if your rom is not using halo it's okay then
Click to expand...
Click to collapse
I don't know Omni has HALO?
Can I have the link for HALO on Omni?
Send from my Nexus 7 on OmniROM 4.4.2
daniel_hk said:
I don't Omni has HALO?
Can I have the link for HALO on Omni?
Send from my Nexus 7 on OmniROM 4.4.2
Click to expand...
Click to collapse
Don't know where to find it! maybe in Paranoid-android github but you can get it using XposedInstaller.
Are there anyway to remove soft keys. I have tested SGS3 Omni ROM. It work fine, but no option to remove soft key.
Sent from my GT-I9300 using Tapatalk
Thanks for the mod..sure will try and report u
Sent from my GT-I9100 using Tapatalk
Hello bro, can u tell me which files are required to get multiwindow feature like omnirom in CyanogenMod?
Or can you please mod for me if I upload the required files?
Thank you.
dsvictor said:
Hello bro, can u tell me which files are required to get multiwindow feature like omnirom in CyanogenMod?
Or can you please mod for me if I upload the required files?
Thank you.
Click to expand...
Click to collapse
It is build from source.
The Commit for Multi-Window. https://gerrit.omnirom.org/#/c/1510/
You may cherry pick the latest in OmniROM source.
Although It is for OmniROM (AOSP), porting to CM should not be difficult (quite a lot of changes though).
I might give a try for CM when the code is a bit mature.
Good luck!
deleted...
Hmm, doesn't work on my Nexus 7 2012 Grouper. On latest Omni nightly. I've opened several apps and 'Add to Splitview' is not available. :/
Sent from my Nexus 7 using Tapatalk
does it work on s3 ? i am on temasek cm11
dsvictor said:
Hello bro, can u tell me which files are required to get multiwindow feature like omnirom in CyanogenMod?
Or can you please mod for me if I upload the required files?
Thank you.
Click to expand...
Click to collapse
daniel_hk said:
It is build from source.
The Commit for Multi-Window. https://gerrit.omnirom.org/#/c/1510/
You may cherry pick the latest in OmniROM source.
Although It is for OmniROM (AOSP), porting to CM should not be difficult (quite a lot of changes though).
I might give a try for CM when the code is a bit mature.
Good luck!
Click to expand...
Click to collapse
They already ported: http://goo.gl/K2VMw0
It works on jfltexx!!!
If you want to try I'll leave a link to my own build (you still have to flash the file on te OP): https://www.mediafire.com/folder/e1nz326bqazw9/Rom
daniel_hk said:
Download links:
AndroidFileHost, goo.im, Mega
Click to expand...
Click to collapse
This has various cherry-pick stuff
Code:
#[WIP] Multi-window
#fw/base: update volume control to white to match 4.4 icons
#[1/2] Base: add more Power Menu actions
#[1/2] Security settings: add option to hide power menu when screen is locked
#[2/2] Framework: add option to hide power menu when screen is locked
#[1/3] base: added offscreen gesture support
#[2/2] OmniGears: Add more Power Menu Options
#OmniGears: volume key music control
#Settings: better IT translation
Enjoy
shady225 said:
does it work on s3 ? i am on temasek cm11
Click to expand...
Click to collapse
Nope , it doesn't
You will get bootloop.
SkullHunter said:
Nope , it doesn't
You will get bootloop.
Click to expand...
Click to collapse
Guess we will see it on temaseks rom in a while, you can also try the archidroid or onmirom, both roms have the feature.
Still, I'm gonna try to implement it in my temasek rom, and shall make a guide of I'm successful doing it.
Sent from heaven
TheMorpheus said:
It works on jfltexx!!!
If you want to try I'll leave a link to my own build (you still have to flash the file on te OP): https://www.mediafire.com/folder/e1nz326bqazw9/Rom
This has various cherry-pick stuff
Code:
#[WIP] Multi-window
#fw/base: update volume control to white to match 4.4 icons
#[1/2] Base: add more Power Menu actions
#[1/2] Security settings: add option to hide power menu when screen is locked
#[2/2] Framework: add option to hide power menu when screen is locked
#[1/3] base: added offscreen gesture support
#[2/2] OmniGears: Add more Power Menu Options
#OmniGears: volume key music control
#Settings: better IT translation
Enjoy
Click to expand...
Click to collapse
Thanks for your effort. Working great on my jfltexx
Can we expect more Homebuilds?
I do like the cherry picks and the change of the network settings. No more FCs
Hi, I created a topic for your mod on the Nexus 5 forum
I tested on Nexus 5 OmniRom Nightlies and it works well
I made a video too
Here is the link to the topic: http://forum.xda-developers.com/showthread.php?t=2581134
will multi window work on stock rooted android? and I think xposed framework can take this to the next level
NiXiNiX said:
Thanks for your effort. Working great on my jfltexx
Can we expect more Homebuilds?
I do like the cherry picks and the change of the network settings. No more FCs
Click to expand...
Click to collapse
I build 3/4 times a day, but I don't know where to post it.
I suggest you to follow me on G+ for daily news!
I've discovered that in my build we don't need the patch of this thread...So I'll leave it alone
On Galaxy Nexus with OmniMetal (an OmniROM porting unofficial) works fine, on Nexus 7 2012 WiFi "grouper" bootloop .
Thanks.
Bye!
! !
Greetings!
I have ported the latest version of LG G3's QuickRemote.
DISCLAIMER: I won't be responsible for any loss of data or other mishaps resulting from using this port. Always backup before flashing anything. Use or test at your own risk.
Information
Latest QuickRemote version ported
Modified some UI Elements to Material Design
This app will run only on Lollipop-based ROMs.
For reference, please check this thread.
Update (v4.50.19)
Flashable ZIP
APK (For updating)
Older version (v4.40.12) here
Thanks to @RieGo for the original scripts and to @Yoshi_Guy for providing files for the recent update.
NOTE - This port is not guaranteed to run on all LG Devices & other OEM's since i only have G3 on mind while porting this one, so apologies in advance if i may not help in fixing it for your device.
Did you try thisw on a G3 with an AOSP rom yourself? It looks like the only thing changed from the working zip is a newer version of the apk file, with the rest of the stuff in that zip file being exactly the same. It just force closes for me, using xenonHD (09-01-15) on LS990
Yeah i just replaced from there. I only tested it with D855 on CM12.1 so there might be some problems yet. if you can give a logcat, that can help
I'm using Resurrection remix and i have the same problem like the other port for quick remote for AOSP.
When i choose Tv there is no list of manufacturers.Wipe cache/davlik every time but nothing change.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you set selinux to permissive?
hikarisei23 said:
Greetings!
I have recently ported the latest verion of LG G3's QuickRemote. Please test at your own risk.
Information
Latest QuickRemote version ported (as of this thread's writing)
Modified some UI Elements to Material Design
This app will run only on Lollipop-based ROMs.
For reference, please check this thread.
Download here
Thanks to @RieGo for the original scripts.
Click to expand...
Click to collapse
Tyyyyy
Sent from my Nexus 7 using Tapatalk
Yeah i just replaced from there. I only tested it with D855 on CM12.1 so there might be some problems yet. if you can give a logcat, that can help
Click to expand...
Click to collapse
sure, here you go.
Ive tried so many things to get a newer version of QRemote to work on an AOSP ROM, with nothing doing. Ive been using other remote apps in the meantime, but nothing out there is as clean and easy to to use than LG's.
Good Luck!
I do have a bunch of stuff on this phone right now, like xposed, that could be causing my problem. Although the [1-13-15] zip works fine. Maybe the material design changes you mentioned could be it? Ill try it on a clean rom soon and see if i still get the same errors in the logcat soon and let you know.
syndre said:
I do have a bunch of stuff on this phone right now, like xposed, that could be causing my problem. Although the [1-13-15] zip works fine. Maybe the material design changes you mentioned could be it? Ill try it on a clean rom soon and see if i still get the same errors in the logcat soon and let you know.
Click to expand...
Click to collapse
Hmm i've skimmed through the logcat and i havent noticed anything strange, will get back on it later
the changes i made was minimal but i'll look into it. Notify me when you're done testing it on a clean rom
Does not work. Cm12.1. d802
the changes i made was minimal but i'll look into it. Notify me when you're done testing it on a clean rom
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Your work is fine, the problem was mine. Im not sure what happened to the ROM i was using, but it was messed up. I noticed all of the folders in /data/data had different ou/rwx permissions, among other problems. Anyways, I wiped my whole phone clean and flashed a new ROM, and your zip, and the app runs perfectly!
Thank-you!
syndre said:
Your work is fine, the problem was mine. Im not sure what happened to the ROM i was using, but it was messed up. I noticed all of the folders in /data/data had different ou/rwx permissions, among other problems. Anyways, I wiped my whole phone clean and flashed a new ROM, and your zip, and the app runs perfectly!
Thank-you!
Click to expand...
Click to collapse
Alright, Glad to know it works
works fine with CM 12.1 thanks.
Please before I install it, someone can tell me if in stb there is the brand patrick? Thanks
Inviato dal mio LG-D802 utilizzando Tapatalk
yay, I used flashify on the zip, reboot, then http://forum.xda-developers.com/xposed/how-to-set-selinux-to-permissive-boot-t3034245
juiceSSH for the terminal commands.
then soft reboot cyanogenmod then the manufacturer list shows up!
time to live the good lazy life again with touch screen remote control.
thanks for the port
CM12.1 not take
Works fine on standard resolution and DPI, but force closes on 1080x1920, DPI 380. D855, AICP, 777 R17.
Yes, same here. I am using full hd res and 360 dpi, app force closes. (Cm 12.1)
To those having problems try using this to switch to Permissive
http://forum.xda-developers.com/showthread.php?t=2524485
ahk31 said:
Works fine on standard resolution and DPI, but force closes on 1080x1920, DPI 380. D855, AICP, 777 R17.
Click to expand...
Click to collapse
gok90 said:
Yes, same here. I am using full hd res and 360 dpi, app force closes. (Cm 12.1)
Click to expand...
Click to collapse
AFAIK most of LG's apps crash when your DPI is below a certain point, so yeah, it's not going to be an easy fix if there is.
hikarisei23 said:
AFAIK most of LG's apps crash when your DPI is below a certain point, so yeah, it's not going to be an easy fix if there is.
Click to expand...
Click to collapse
OK, I see, but [APP][5.0.2][IR]LG QuickRemote for AOSP [1-13-15] is working just fine with custom resolution and DPI.
This project is discontinued. Please do not expect any replays from me in this thread. You may still use the attached files (if available) in your own risk. Thank you...
Hi friends
Good news for Korean Galaxy S5 users.
CyanogenMod finally meets Korean Galaxy S5 (SM-G900S/K/L).
Warning
Everything you are doing on your mobile is on your own risk. I am not responsible for any damage to your device. Please don’t point your finger at me in case you brick your device or lost SD card.
Supported device
Samsung Galaxy S5 SM-G900S (SKT)
Samsung Galaxy S5 SM-G900K (KT)
Samsung Galaxy S5 SM-G900L (LG)
Requirements
TWRP/CyanogenMod (View attachment Snapshot_recovery.tar or View attachment Nigthy_recovery.tar) or any other recovery image (for klte).
CyanogenMod 12.1 Nightly or Snapshot ROM (The ROM files for the international version (SM-G900F) from the official site: Trust me; it will work)
Google apps (GAPPS) for Lolipp 5.1.
Windows PC/Laptop
USB cable
The device should be rooted
Step-by-step installation instructions
1. Download the ROM (either Snapshot or Nightly), recovery image of your choice and GAPPS from the above links.
2. Copy ROM and GAPPS into the main folder of your external SD card.
3. Enter ‘download mode’ (press and hold volume down, home and power buttons together until the recovery screen appears) of your galaxy S5 and flash the above downloaded recovery image using ODIN (for guidance to use odin, visit here).
5. Reboot your device into the newly installed ‘recovery mode’ (press and hold volume up, home and power buttons together).
6. Wipe data, cache partition, internal storage (or/and factory reset) etc.
7. Flash the ROM followed by GAPPS. (important: also flash View attachment cm12.1_snapshot_audiofix_SM_G900S_K_L.zip along with snapahot)
8. After finishing the flashing, again wipe cache and reboot your device (remember, the first boot requires few minutes to finish)
Now you are successfully escaped from Samsung’s TouchWiz interface and an infinite number of pre-installed useless apps. Enjoy the taste of pure android and CyanogenMod.
Please remember, the warranty of your device is now void. However, your device will receive regular updates from CyanogenMod.
Known issues
Finger print lock is not available
Caller and media audio may not work sometimes (solved in the latest nightly). For snapshot, use this fix View attachment cm12.1_snapshot_audiofix_SM_G900S_K_L.zip (flash after ROM).
.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Acknowledgements
CyanogenMod
TeamWin/ClockworkMod custom recovery projects
XDA team
Infinite number of other developers and testers
Thanks for your patience
Hi thanks for share this. How to fix sound problem using sound about?
Dashkaa said:
Hi thanks for share this. How to fix sound problem using sound about?
Click to expand...
Click to collapse
Hi,
Sometime it works nicely. Otherwise you need to manually change the Default action of Media audio/phone audio from 'Let App Decide' to 'Speaker', 'Wiered Headphones' or whatever you want (see the attached screen shots). So far I never face any issue with my phone audio.
Did you try Unofficial cm13?
sunilpaulmathew said:
Hi,
Sometime it works nicely. Otherwise you need to manually change the Default action of Media audio/phone audio from 'Let App Decide' to 'Speaker', 'Wiered Headphones' or whatever you want (see the attached screen shots). So far I never face any issue with my phone audio.
Click to expand...
Click to collapse
I tried 900f unofficial cm13 in korean s5 900s. It successfully booted works good. But have sound problem. Speaker and ear speaker doesn't work. Use sound about but bad luck. Do you have any idea for fix this?
Dashkaa said:
I tried 900f unofficial cm13 in korean s5 900s. It successfully booted works good. But have sound problem. Speaker and ear speaker doesn't work. Use sound about but bad luck. Do you have any idea for fix this?
Click to expand...
Click to collapse
I only tried CM 12.1 so far (but on my SM-G900L device). Probably your issue will be solved by changing the Media and Phone Call Audio into 'Speaker' and 'Earpeice' respectively (instead of 'Let App Decide'). Please try.
I already tried this. So revert back to dokto 7.3.1.
sunilpaulmathew said:
I only tried CM 12.1 so far (but on my SM-G900L device). Probably your issue will be solved by changing the Media and Phone Call Audio into 'Speaker' and 'Earpeice' respectively (instead of 'Let App Decide'). Please try.
Click to expand...
Click to collapse
I already tried this. So revert back to dokto 7.3.1.
Dashkaa said:
I already tried this. So revert back to dokto 7.3.1.
Click to expand...
Click to collapse
Unlucky... Lets wait for the release of official CM 13...
huh
Without Fingerprint scanner It's useless Dude
Cm_RoX said:
Without Fingerprint scanner It's useless Dude
Click to expand...
Click to collapse
Finger print scanner will come soon in cm-13.0 based ROMs. It is already available in Mokee (which is also based on cm-13.0). But not sure about cm-12.1 see this
sunilpaulmathew said:
Finger print scanner will come soon in cm-13.0 based ROMs. It is already available in Mokee (which is also based on cm-13.0). But not sure about cm-12.1 see this
Click to expand...
Click to collapse
Mokee ? Can I have a link please
Cm_RoX said:
Mokee ? Can I have a link please
Click to expand...
Click to collapse
Here is the link
http://download.mokeedev.com/?device=klte
I Think Still Not Supported For G900K ?
Cm_RoX said:
I Think Still Not Supported For G900K ?
Click to expand...
Click to collapse
Flash this boot file after ROm and GAPPS... It will work... But there is some bugs... Plz remember that... https://www.dropbox.com/s/0fz7qtazxk7fx85/Mokee_boot_img_from_cm.zip?dl=0
sunilpaulmathew said:
Flash this boot file after ROm and GAPPS... It will work... But there is some bugs... Plz remember that... https://www.dropbox.com/s/0fz7qtazxk7fx85/Mokee_boot_img_from_cm.zip?dl=0
Click to expand...
Click to collapse
Thanx Mate
sunilpaulmathew said:
Flash this boot file after ROm and GAPPS... It will work... But there is some bugs... Plz remember that... https://www.dropbox.com/s/0fz7qtazxk7fx85/Mokee_boot_img_from_cm.zip?dl=0
Click to expand...
Click to collapse
yes . my devices sm900s
no receive sim .....
cuonglm said:
yes . my devices sm900s
no receive sim .....
Click to expand...
Click to collapse
You mean no mobile network? and which cm version? 12.1 or 13.0? Try to reset phone radio by 1) dial *#*#4636#*#* 2) select phone settings (first option) then 3) tun of phone radio and then again turn on. Hope it will work.
cm12.1
much, thanks for the tip but the Soundabout app worked! but please evolve CM12 I'm still using. did the test at 6.0 marshmallow am with CM12 and would like to have both good fluid roms I will make collection, lol, xxx and congratulations for the magnificent work users superusers Brazil's galaxy s5 sm-g900s Korean agrdecem repeat galaxy s5 sm-900s korean is:good: better what the national version sm-g900m!:good:
Miguel angelor9 said:
much, thanks for the tip but the Soundabout app worked! but please evolve CM12 I'm still using. did the test at 6.0 marshmallow am with CM12 and would like to have both good fluid roms I will make collection, lol, xxx and congratulations for the magnificent work users superusers Brazil's galaxy s5 sm-g900s Korean agrdecem repeat galaxy s5 sm-900s korean is:good: better what the national version sm-g900m!:good:
Click to expand...
Click to collapse
Download the latest cm-12.1 nightly from this dropbox link (official link is no more available). It is bug free. No sound issues.
If you want to try cm-13.0 Marshmallow in your Korean device, follow this thread. But you will face sound bug.
first install CM13 based stock rom marshmallow 6.0 sm-g900s
Hello, friend I am a super Brazilian users! I wonder what seria.A-GAPPS need to install am preparing my device for installation! thank you for CM13 design for sm-g900s devices please answer me a big hug! and I wonder if there will be updates CM13 klte and also recovery 'TWRP' desculp just correcting what I wrote.
Miguel angelor9 said:
Hello, friend I am a super Brazilian users! I wonder what seria.A-GAPPS need to install am preparing my device for installation! thank you for CM13 design for sm-g900s devices please answer me a big hug! and I wonder if there will be updates CM13 klte and also recovery 'TWRP' desculp just correcting what I wrote.
Click to expand...
Click to collapse
You may install either opengapps (i recommend nano) or A-gapps. The latest version of twrp is here. It will work well with the ROM.
AICP Oreo.
................ Old stuff below................
AICP
- also known as Ice Cold Project - is based on LineageOS 14.1, but with a few features added.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install as any other ROM
Below guide is inspired from this CM13 post.
Unlock the Bootloader (Fastboot Mode = Vol. Up + Power)(Command: fastboot oem unlock)
* Flash a custom recovery (Command: fastboot flash recovery name.recovery.img)
Download AICP ROM and Open GApps (ARM64/7.1) and copy to the phone
Reboot to Recovery (Vol. Down + Power)
Do a Full Wipe (will delete everythings so make a copy of your file to the microSD card)
Flash AICP ROM
Flash GApps
Reboot the phone and wait (the first time will take a bit of time)
* Using twrp 3.0.2-0, there will be 2 red error lines when flashing - just ignore.
Credits:
LineageOS for making R7Plus ready for custom ROMs.
The team behind AICP.
omnirom, SlimRoms & probably more.
Source code
AICP
Device source and build guide.
Have fun!
Very nice to see the R7 Plus get custom ROMS ! Thanks !
rch.aj34 said:
Very nice to see the R7 Plus get custom ROMS ! Thanks !
Click to expand...
Click to collapse
Very nice
---------- Post added at 01:58 AM ---------- Previous post was at 01:56 AM ----------
Very nice:good::good::good:GoodGuide
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
-pixelfreak- said:
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
Click to expand...
Click to collapse
What device?
What recovery?
What was installed previously?
Works perfectly, keep going :victory:
re
teemo said:
What device?
What recovery?
What was installed previously?
Click to expand...
Click to collapse
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
-pixelfreak- said:
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
Click to expand...
Click to collapse
Looks good to me, even though I don't know the recovery. It should work, since it works for CM13.
However, you can try with the official twrp. That's the one I link to from OP.
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
simika said:
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
Click to expand...
Click to collapse
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
teemo said:
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
Click to expand...
Click to collapse
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
simika said:
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
Click to expand...
Click to collapse
Thanks. There may be something here on CMs Gerrit. We are not alone. Im thinking our v3.10 kernel or the vendor blobs are not yet able to cope 100% with MM and need some workarounds.
It will be fixed.
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
2007jchill said:
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Click to expand...
Click to collapse
Thanks.
I don't know about moving apps yet. But you should be able to format the sdcard as ext4 and use it as internal data. I think you get the option to chose the first time you mount the sdcard. I'm sure there is a guide somewhere
jacktackle said:
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
Click to expand...
Click to collapse
1. DarkSideOrange theme. One of many variants: http://youtu.be/l5wuc7bKO-o
2. Long press an empty area of the screen, chose settings. Disable search bar.
This rom is only getting better and better.
Latest build outstanding.
Cheers
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
2007jchill said:
This rom is only getting better and better.
Latest build outstanding.
Cheers
Click to expand...
Click to collapse
Thanks. There are some improvements in next build, like fixing clock settings fc.
2007jchill said:
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
Click to expand...
Click to collapse
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
teemo said:
Thanks. There are some improvements in next build, like fixing clock settings fc.
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
Click to expand...
Click to collapse
Just got the latest from apkmirror once installed it shows in play store then when you uninstall on play store you get the option to install the 5.x.x version which works fine. I think the 6.x.x version is for the nexus at the moment.
AOKP (Android Open Kang Project)
7.? Nougat for All Motorola "Quark" Devices (XT1225 | XT1250 | XT1254)
With Substratum/OMS Themes
KNO'DIS: I, OR ANYONE ELSE AT XDA, WILL NOT BE HELD RESPONSIBLE FOR "BRICKING" YOUR PHONE!! IF YOU MANAGE TO MAKE A BRICK, DUE TO YOUR "FUN-DA-MENTAL" INABILITY TO READ, GO BUILD A BBQ PIT WITH IT!! (Or ask for help, there's a lot of friendly people around here)
This is for the AOKP fans out there that are using the Motorola Quark, which includes: DROID Turbo, Moto MAXX and Turbo Maxx. It's stable, I use it daily, however it's still under development, see post #2 ("Extra Info") for additional information.
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation
Clean Install Recommend:
Use TWRP for a Full Backup
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Upgrading
Use TWRP to Backup Data Only
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Setup Phone
Reboot Recovery
Restore Data Backup
Download
Current Release
Open GApps 7.? (I used Pico)
Credits
Development:
@bhb27
ROM Testers:
@eddiemc12
@hpbrasil
@kitcostantino
@Nitefire77
@Shiftydogit
And, I've recently added more (PM me if you want your name here)
Sources
Source Code: AOKP
Device Tree: Motorola Quark
Kernel: BHB27 Stock Kernel
Extra Info
Most "bugs" have been fixed. IF you find one, feel free to share on this thread :good:
PLEASE, PLEASE:
Do a "clean install" before reporting issues, you may also want to clean your modem first using this:
Download Zip
(Flash using TWRP)
Kang 2
Great.
Is it using bhb27 kernel or you modified something in it?
Very nice, thanks @NepoRood
Debuffer said:
Great.
Is it using bhb27 kernel or you modified something in it?
Click to expand...
Click to collapse
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
NepoRood said:
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
Click to expand...
Click to collapse
But is it using Bhb kernel 1.0?
Or you changed something and it's your 1.0 version?
ROM was running great. Been running it a couple days without hassle
Nitefire77 said:
ROM was running great. Been running it a couple days without hassle
Click to expand...
Click to collapse
same here ,smooth and fast with no reboots.
For those who has problems installing because of com.android.phone has stopped
First fresh install
Reboot
It'll problem
Reboot in recovery
Dirty install the rom again (without any configuration done in the first boot)
Reboot
Worked for me.
@NepoRood can you please add caffeine tile in next update? And maybe zzmoove gov? I know its just the first build, but this additions would be really loved. Thank you for such a good job.
Link to kernel not working. Could you please confirm
janine13 said:
Link to kernel not working. Could you please confirm
Click to expand...
Click to collapse
It's a typo, my bad. You know that is the source code, right?
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
NepoRood said:
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
Click to expand...
Click to collapse
Yeah. I use Bhb kernel since 5.1.
Thank you for this.
NepoRood said:
It's a typo, my bad. You know that is the source code, right?
Click to expand...
Click to collapse
Yeah, I got that part after I went to the site. I was looking for the kernel in a bid to try using it with the ROM. I have been using the ROM for the past 3 hours now and all seems smooth and stable so far. I will keep running it and see, if it stays this way I just may have a new daily driver
Great rom, it runs very well. Only issue with it, is that the torch using gestures is very inconsistent. Similar to what happened when 6.0 roms first came out. It either takes 30 seconds to activate, or never works at all.
Also, the setting to control media volume by default doesn't work. This is the same on cm14.1, so imagine it's not something you can easily change in the rom.
Users with GPS problem only make the flash of this file that will be solved.
https://www.androidfilehost.com/?fid=24531035584725320
Please add publication. @NepoRood
Very good rom.stable and smoot.but there is little laggy for camera conect in many apk.more of it happens for front camera
Sent from my DROID Turbo using Tapatalk
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Pakman300 said:
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Click to expand...
Click to collapse
There are 2 folders where pictures are stored: DCIM and Pictures
Using the built in file explorer (or a PC), rename each of these. I did DCIM2 and Pictures2, then use your phone to take a picture. Both folders will be recreated. Then, drag and drop everything from the #2 folder into the corresponding "New" folder.
Hassle? Just a bit, but we did just change branches on our android phones :laugh: