Database Info

[Completed] Auxus Nuclea N2 won't switch on

Hi guys, i used SP Flash tools to flash a MLais MX 69 Pro ROM on my Auxus Nuclea N2 since both are identical clones. However, the flashing failed and now the phone won't switch on. Request help. Please.

Since there is no forum for your specific device, please post in Android Q&A, Help & Troubleshooting
and someone more expert will help you.
I'd try to flash original firmware for your device from the manufacturer.

I tried
The phone won't go into recovery mode for me to flash anything. And i can't find an SP Flash Tools version for the ROM
Thanks anyways! i'll try the other forum. cheers!
Perseus71 said:
Since there is no forum for your specific device, please post in Android Q&A, Help & Troubleshooting
and someone more expert will help you.
I'd try to flash original firmware for your device from the manufacturer.
Click to expand...
Click to collapse

[Completed] build.prop messed upKarbonn Titanium S4 Plus

Hi ,
This is my 1st post. I did some edits in my bulid.prop and screwed it up now the phone is stuck at the boot logo.
I have a copy of bulid .prop and tried to flash that after reading some of the post but no luck the installation get aborted every time. I tried installing CWM that installation also got aborted. I dont have the copy of the ROM. Some one pls help me.
Or if anyone have the stock rom pls help me I am in great trouble. Dont have any money for a new one :crying::crying::crying:
I am also attaching the bulid.prop file which i tried to flash. Someone pls edit that to help me.

Hi,
I can't find a relevant thread for your device and issue, but you can ask for help here,
Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
You could try the advice in this thread too.... Using ADB to restore it. http://forum.xda-developers.com/showthread.php?t=1895631
You can't flash anything without a custom recovery, so ADB is your best chance. You could install the stock firmware again as well. But I can't find recoveries or stock rom your device on XDA. You could contact the manufacturer for it. And definitely don't use a build.prop file from any other device.
Or again, ask in the first link I posted for other opinions. :good:
Good luck!

[Completed] [HELP] ALPS H3 getnord cat clone

I was searching for getnord cat h3 clone - alps h3 stock rom which can be flashed by smartphone flash tool but i cannot find it. i tried to flash very similar to this phone but i got just bick: phone does not showing anything and no sound, but flash mode is working. Please help me with stock rom.
Build number : ALPS.JB3.MP.V1.6

d3n0 said:
I was searching for getnord cat h3 clone - alps h3 stock rom which can be flashed by smartphone flash tool but i cannot find it. i tried to flash very similar to this phone but i got just bick: phone does not showing anything and no sound, but flash mode is working. Please help me with stock rom.
Build number : ALPS.JB3.MP.V1.6
Click to expand...
Click to collapse
Hi and welcome to XDA.
Don't try flashing rom's not made for your device, that's a good way of hard bricking your phone. Anyway, I couldn't find much information about your device here. Try posting your query in Android Q&A,Help and Troubleshooting or in the friendly Q&A thread here->[Ask Any Question][Newbie Friendly]. Experts there may be able to help you.
Good luck

[Completed] Konka P3 hard bricked?

Hi! My Konka P3 is dead. I flashed the official ROM but was version 1. On the phone was version 2.
The message on the site (needrom) is writing: ”ATTENTION This ROM is not compatible with ROM 1 ( Install FOTA )”.
After flashing, the phone seems dead. No boot, no sign of life. No usb connection.
Is there anything that can be done? Thank you.

Ivanon said:
Hi! My Konka P3 is dead. I flashed the official ROM but was version 1. On the phone was version 2.
The message on the site (needrom) is writing: ”ATTENTION This ROM is not compatible with ROM 1 ( Install FOTA )”.
After flashing, the phone seems dead. No boot, no sign of life. No usb connection.
Is there anything that can be done? Thank you.
Click to expand...
Click to collapse
Hi and welcome to XDA.
I couldn't find much information about your device here. Try posting your query in Android Q&A,Help and Troubleshooting or in the friendly Q&A thread here->[Ask Any Question][Newbie Friendly]. Experts there may be able to help you.
Good luck

Nevermind, i managed to ressurect the phone.

[Completed] Porting LP rom to MTK6582 Lenovo a588t

hi guys, ive got myself a most unusual phone, its a lenovo A588t flip phone running android 4.4 with kernel 3.4.67 and MTK6582 quad core 1.3GHz chipset, its a phone that seems to have no support whatsoever, not even a stock rom on the internet or lenovo's website.
now, im trying to port lollipop to it as the current rom has crap forged in the rom like Clean master and DU speed booster etc, i delete the system apps using Titanium backup and they all return after rebooting
ive never done a rom port before so i tried a few tutorials on google on the subject and they all seem way too complex, dont make sense or is telling me to copy a file that doesnt exist & i get something wrong, ive tried pre-made roms from mtkroms.com and not one of them actually installed, never mind booted up, giving an error: (status 7), the phone has a seemingly old version of clockworkmod recovery installed similar to the one used on a Google Nexus One
i tried to setup "cygwin" but a week later its still installing so gave up on that.......
im in need of expert help, what Lollipop ROM do i use as the base rom, what files do i edit/replace with the stock rom, what is the easiest method of doing such thing?
also, is android kitchen any use?
any help greatly appreciated

Hello,
Thanks for using XDA Assist.
Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist