I recently bought a motorola defy plus bl7 a month ago its DFP-231 AsiaRetail03.en and 2 days ago i tried to downgrade my defy plus to bl6 with rsd lite to root my phone and it said downgrade finished sucessfully but afterwards when i started to turn on my when i connected it to pc rsd lite isnt recognizing my phone it is just giving me a white light ....... so i think its dead plz plz help me to get my defy plus back:crying:
akhilesh kotla said:
I recently bought a motorola defy plus bl7 a month ago its DFP-231 AsiaRetail03.en and 2 days ago i tried to downgrade my defy plus to bl6 with rsd lite to root my phone and it said downgrade finished sucessfully but afterwards when i started to turn on my when i connected it to pc rsd lite isnt recognizing my phone it is just giving me a white light ....... so i think its dead plz plz help me to get my defy plus back:crying:
Click to expand...
Click to collapse
You should not go to downgrade it as Defy+ comes with eFuse Technology. eFuse acts just like a bridge each time you flash a new update to your phone you burn a bridge, the information went to the other side, but there is no coming back. [All courtesy goes to Zephyrot ]
You can find more here: 1. http://forum.xda-developers.com/showthread.php?t=1216982
2. http://forum.xda-developers.com/showthread.php?t=966537
Now, if you complete these basic learning, Check this page to know how to root. http://forum.xda-developers.com/showthread.php?t=1542956
Hope it will solve.
i got my defy plus back by installing a DFP-1321 rom can u tell me whether it is bl 6 or bl 7 and whether it can be rootable or not? plz
akhilesh kotla said:
I recently bought a motorola defy plus bl7 a month ago its DFP-231 AsiaRetail03.en and 2 days ago i tried to downgrade my defy plus to bl6 with rsd lite to root my phone and it said downgrade finished sucessfully but afterwards when i started to turn on my when i connected it to pc rsd lite isnt recognizing my phone it is just giving me a white light ....... so i think its dead plz plz help me to get my defy plus back:crying:
Click to expand...
Click to collapse
Dear friend >>>i have the same problem ...exactly the same ..my dify+ only give me white light but pc no recognize So i need u to tell me only how can i make it boot to the bootloader and after that i can continue BUT PLZ SOMEBODY TELL ME HOW TO MAKE IT START THE BOOT-LOADER BECAUSE ITs NOT RESPONDING FOR THE ( vol+ and power ):crying::crying::crying: PLZZZZZZZ SOME HELP i serching in the web but this problem no one answer it
NO body answer or HELP???????????????????
raefqadamani said:
NO body answer or HELP???????????????????
Click to expand...
Click to collapse
Your battery is dead. You can't hard brick the Defy due to its locked bootloader. Do the McGyver method. See this link http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge
Help arrives.. though late...
raefqadamani said:
NO body answer or HELP???????????????????
Click to expand...
Click to collapse
now if u have bl7 .. then don't go for any other way for rooting... follow each n every step correctly in the process given below.. n voila u r done.:good:
http://forum.xda-developers.com/showthread.php?t=1889325
press thanks if it helped.
my device: Motorola defy plus (running on CM10.1 by quarx)
defy plus bricked
Dear All,
I had flashed Motorola defy plus with kitkat a month ago. As it was getting hanged, i tried to switch it to stock rom but the RSD lite is giving error while flashing everytime.
i have tried many sbf but it diidnt worked out. kindly let me know the correct procedure and the SBF should i flash.
Now its showing Motorola logo only and doesnt move ahead neither i am unable to reach stock recovery.
i did it all by charging battery from universal charger as i cant even charge my battery.
I am in need of urgent help and didn't want to let die my DEFY PLUS
Regards
Abhishek
Hello everyone,
I'm actually new to this and its my first time posting a distress call.
HELP!
I own a Samsung Galaxy S Duos 2 (GT-S7582) Phone and it doesn't Boot up.
It is stuck at the Boot Screen with a Red exclamation mark on the top left corner.
I searched everywhere on the net and looked up many posts, but couldn't get a solution.
My Recovery Mode doesn't work (Shows the same Red ! while booting) and all I'm left with is the Boot Screen and the Download mode.
I think doing a Factory reset might help me, but I'm literally a Newbie to ODIN.
Please help me :crying: . I can give a detailed explanation of the scenario if required. Please Help. Will be very much grateful.
Couldn't find my Devices' Forum so posted here
Problem solved
Finally, I recovered my phone. Flashed the stock ROM and it worked.
I did get the links for the stock ROM from other threads so thanks a lot XDA
:good:
help me :'(
LordZed400 said:
Finally, I recovered my phone. Flashed the stock ROM and it worked.
I did get the links for the stock ROM from other threads so thanks a lot XDA
:good:
Click to expand...
Click to collapse
how did you manage your problem i have the same too you .. i already install the oficial firmware and the update and i manage (!) that one .. and when i start it .. it has no sim card .. or it can't detect a sim card.. whould you help me please .. please .. i really2 need your help. i really dont know what to do ..
LordZed400 said:
Finally, I recovered my phone. Flashed the stock ROM and it worked.
I did get the links for the stock ROM from other threads so thanks a lot XDA
:good:
Click to expand...
Click to collapse
I have same issue I have samsung galaxy duos 2 gt-7582 can you help me on how to fix this issue?
Hey can you help me out with that same problem u get solve? I have a Samsung s duos gt s7582l and it stuck on the startup screen with a red exclamation mark.
LordZed400 said:
Finally, I recovered my phone. Flashed the stock ROM and it worked.
I did get the links for the stock ROM from other threads so thanks a lot XDA
:good:
Click to expand...
Click to collapse
Same Problem
It is stuck at the Boot Screen with a Red exclamation mark on the top left corner.
I searched everywhere on the net and looked up many posts, but couldn't get a solution.
My Recovery Mode doesn't work (Shows the same Red ! while booting) and all I'm left with is the Boot Screen and the Download mode.
I think doing a Factory reset might help me, but I'm literally a Newbie to ODIN.
Please help me :crying: . I can give a detailed explanation of the scenario if required. Please Help. Will be very much grateful.
Couldn't find my Devices' Forum so posted here[/QUOTE]
sunnyature said:
It is stuck at the Boot Screen with a Red exclamation mark on the top left corner.
I searched everywhere on the net and looked up many posts, but couldn't get a solution.
My Recovery Mode doesn't work (Shows the same Red ! while booting) and all I'm left with is the Boot Screen and the Download mode.
I think doing a Factory reset might help me, but I'm literally a Newbie to ODIN.
Please help me :crying: . I can give a detailed explanation of the scenario if required. Please Help. Will be very much grateful.
Couldn't find my Devices' Forum so posted here
Click to expand...
Click to collapse
[/QUOTE]
i have the same problem.... HELP PLEASE . MY DEAR FRIEND........ HELP PLEASE
The Problem you're stuck in is called ... Soft Brick .. don't worry nothing has happened to your phone. Your data is also secure. Now what you Need to do is Just flash the stock ROM via. Odin to unbrick your phone. Get your stock ROM from sammobiles.com or XDA.
Sent from my Galaxy note 3 using Tapatalk
samsung s7582 stock on boot screen
I have seam problem and I flashed stock rom with spt and z3t but i cant reslove that:crying:
Red exclamation mark !
me 2 i have flashed 7582 with 2 different flashes but still stuck with the res exclamation mark with odin and with octoplus box eny solutions >? or i need flash recovery first ??
!!!!
LordZed400 if u still come to here plz post the link for the rom that u flashed . or eny one know what the solution for the prob help us plz
I have a Samsung TAB E. It is stuck at the Boot Screen with a Red exclamation mark on the top left corner.
Shows the same Red ! while booting and all I'm left with is the Boot Screen and the Download mode.
Please help me . I can give a detailed explanation of the scenario if required. Please Help. Will be very much grateful.
Help
For me, it shows the ! exclamation mark even in recovery and download mode. I cant even acess them. Please help me.
I can't flash the stock rom cause it always fails could anyone plsss tell me the reasons why it fails
LordZed400 said:
Finally, I recovered my phone. Flashed the stock ROM and it worked.
I did get the links for the stock ROM from other threads so thanks a lot XDA
:good:
Click to expand...
Click to collapse
I also have same problem. How I flash stock ROM
Plz help me
HELP!!!!!
I own a Samsung Galaxy S Duos 2 (GT-S7582) Phone and it doesn't Boot up.
It is stuck at the Boot Screen with a Red exclamation mark on the top left corner.
I searched everywhere on the net and looked up many posts, but couldn't get a solution.
My Recovery Mode doesn't work (Shows the same Red ! while booting) and all I'm left with is the Boot Screen and the Download mode.
Help pleaseeeeee!
:crying:
GUYS HELP ME THIS PROBLEM THE RED EXCLAMINATION MARK ("!") How To I Fix This? Please Reply....:crying::crying:
I am using samsung galaxy sm-g130e..my phone not responding..when i turn on phone red exclamination mark show.
So how to recovery..my phone.
download the frmware and upload via odin thats it
problem solved
Now open the "Odin3 v3.09.exe" file with admin privilege and connect your Galaxy S Duos 3 using the USB data cable to the computer.
4. If the connection was successful you will get an "Added" message from the Odin message box, and the "ID: COM" box in Odin will turn blue with the COM port number indicating successful connection. (if you are not getting the added message try another USB port or install/ reinstall Samsung USB drivers)
5. Now go back to your Odin window and click on "PDA or AP" button and select the "Sduos3ROOT.tar.md5 " file which you have already downloaded to your PC desktop. Please make sure that "Auto-Reboot" and "F.Reset Time" checkboxes are only checked in Odin before proceeding any further.
6. Now click "Start" in the "Odin" and wait for the installation procedure to complete which will normally take few minutes and in the end your phone will be restarted and you will get a "Pass" message if the whole process was a success. Please don't disconnect the phone from your computer.
i have same problem plz help me
Hello guys. my friend's droid charge boot loops and I don't know what to do. the phone is just turning on and just stuck on samsung logo. ive tried odin, removed the battery and pressed volume down and a triangle shows and downloading etc but it doesnt show at odin and a popup shows that the pc doesnt recognize usb device. i also cant access cwm or stock recovery. can anyone please help me. Thanks and godbless
mamerto22 said:
Hello guys. my friend's droid charge boot loops and I don't know what to do. the phone is just turning on and just stuck on samsung logo. ive tried odin, removed the battery and pressed volume down and a triangle shows and downloading etc but it doesnt show at odin and a popup shows that the pc doesnt recognize usb device. i also cant access cwm or stock recovery. can anyone please help me. Thanks and godbless
Click to expand...
Click to collapse
This fellow is hosting at least some of the files you need.
Blessings,
~A
Thank sir, but my problem is the pc cant read the phone and stucked at samsung boot logo.. Is there any way to fix this? Or maybe reinstall any recovery? Thank you sir and Godbless
Sent from my Fusion Flare v4.5 using Tapatalk
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
so hello everyone my yuphoria y5010a is bricked but it is not totally bricked but fastboot and recovery is not accesable and the phone showing battery low splash screen(boot logo)only i tried method of sd card by dev @Titokhan but emmc dump is not helpful for me, i also tried with QFIL tool but port not showing i have installed qualcomm usb drivers and also adb is there.
anyone witch same problem and any dev who can help is needed.
thank you.
Hi try this press both vol+ n vol- together with battery removed. Then with buttons pressed insert battery n connect to system. U should see port no. I tried it once on snapdragon phone which is stuck on battery logo. Also I later learnt that battery logo is default fastboot mode. Try to flash from that screen. Plz post ur status.
bro i gave phone to sevice center they flashed stock rom on my device so iam good now but thANKS for helping me.