Hi guys new to this loaded the android rom onto my hd2 htc works great but when i restart it keeps coming up with failed to find rootfs on sd card. You need to unzip a rootfs zip file pls help
pls in simple instructions as i am new to this thanks guys
I had the same problem...
I was reading some posts and saw some people saying to delete the "Android" folder that is automatically created by the Android OS.
I decided that if that worked, then during boot sequence it must look in the "Android" folder for the rootfs file, I copied all the Android files from my sd card root to the "Android" folder, having the all the files in both locations (sd card root and Andoid folder). After i did that it booted fine. Deleting the folder is great if it works, but then you are not able to use a dual boot program if you must delete the folder each time because it is created again.
Anyways...it worked for me, so good luck!
Guys im tired of using the sdcard to install android to my polaris as i always erase the andboot folder after everything so as to save space. I know you'd say "what space its a small file" yes but i just wanna know how to flash it comfortably to my NAND thru my PC USB connection like flashing roms with the upgrade utility. Thanks!!!
you are ridiculs but:
download customRUU.exe
copy the nbh file in the customRUU.exe dir
all the other files can't be flashed directly (the androidinstall.tgz must be in andboot folder)
lol thanks master l1q1d for the super response. actually i was dying to flash the android on my polaris immediately after my SD card broke. I had to install it thru usb since i have no sdcard. lll try that now.
i was actually looking for a way to copy the andboot folder to the phone memory after NBH flash, but im not sure that the phone memory has less memory to contain the boot files and the installation thereafter. I lost my sdcard and would wanna make the automation work without it. could this be possible? Thanks again.
No, you can't do it.
That does it. IT wont be. thanks
(Now, I know this is not in the right section or even in the device's page, but...)
Forewarning: I am NOT responsible for any damages caused by running this tool. (You ran it, not me.) Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Pio_masaki and I have been working hard for almost a year to get root on the ICS version of the Toshiba Thrive 10.
Last night, I was able to finally sneak past sealime.ko and have it work.
It uses the "root any ICS device" tool, with special modifications specifically for the Thrive 10.
(can't post any links, so it's on the "thrive-hackers" github page.)
Special note: While it is set up for OSX ADB, I have not been able to find any binaries.
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
rohads said:
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
Click to expand...
Click to collapse
Saying there is a method to root it now, yes, we got around sealime.ko. This means we can flash the HC bootloader which is unlocked, which allows custom recovery and kernels/ramdisks (boot.img) to be used.
BTW the link is https://github.com/Thrive-Hackers
congrats guys ! very awesome work !
jdsingles deodexed ROM w/ agat63's 1.3 kernel Suped up w/ CB 6.26.13
More specifically, it bypasses sealime to flash the unlocked bootloader. What we did was we MVd /dev/block/mmcblk0p6 to 0p9. It's a pure fluke Pio and I found out that it works. We found out that sealime was explicitly blocking write to 0p6, so he semi-sarcastically said to move it. I ran the mv command, whadda ya know? It worked!
'Course, getting the tool completed wasn't as simple as that...
PS: Could we get this moved to the Toshiba Thrive Development section?
Have instructions been written for the process?
worked for me
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
navyguy said:
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
Click to expand...
Click to collapse
Try fastboot flash:raw.
Is there any need to do a backup before rooting?
TubaMeister said:
Is there any need to do a backup before rooting?
Click to expand...
Click to collapse
Not explicitly, but it wouln't hurt in case your tablet got into contact with allspark.... er, the bootloader didn't flash, and you're stuck in a bootloop.
easy root and CWM recovery
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Uh oh
robyn402 said:
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Click to expand...
Click to collapse
I installed the drivers, used the root tool, the restore was successful, but now the tablet is stuck in a boot-loop mode.
The root tool was running, there was a line that said the screen would go blank, which it did, and it stayed there for several hours. When I came back to check on it, the tablet was off, so I turned it on. That's when I found the boot loop. It'll get to the home page, tell me that nova launcher has stopped, then loop back to the moving stars section of the boot screen.
Any ideas on what to do now?
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Kyonex said:
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Click to expand...
Click to collapse
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
DLeach4512 said:
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
Click to expand...
Click to collapse
also make sure you open the zip and place the update.zip on your card -
From my GSIII - jd's Stock/Rooted/Deodexed 4.3
Kyonex said:
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
Click to expand...
Click to collapse
Excellent!
1) I had to extract "update.zip" from the ROM I had downloaded.
2) I re-formatted the card I was using to FAT32 instead of FAT.
3) I was able to get the install started with no trouble after following your directions.
BIG THANK YOU FOR THAT!
I got a successful install message, and then it booted!
Thanks a million!
Problems after Mount Changes
I changed the mount as described on thriveforums.org to allow apks and data to go to the external sd rather than "shared" internal memory.
I now have the situation with less free memory available on the sd card than on internal. The CWM backups went on the physical card- a 32 G one almost full. Will look for a major mfr 64 Gig.
One or so issues with the revised mounts where the external sd card is now internal. They relate to making backups with dalepl's latest CWM 6.0.1: where to put CWM backups for now and are they being made correctly with the revised mounts?
The backup made prior to the mount change looks normal: a single, dated/numbered folder about 2.6 Gb, 6 files: boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img and system.ext4.tar. However, the one made after the mount change also has a dated, numbered folder of only 15.8 Mb and 7 files: .android_secure.vfat.dup, boot.img, cache.ext4.dup, data.ext4.dup, nandroid.md5, recovery.img and system.ext4.dup. There is a second folder associated with the later bu called "blobs", which is huge --2.76 Gb, 3292 folders and 6581 files. Is this an expected result and any one think it might be a valid bu?
Also, it went on to the external SD (now "internal") and total storage use is now almost 28 Gb out of 30.2. I now have the situation with less free memory available on the sd card than on internal. The stuff there looks ok, pix movies and music plus CWM bups of 5.5 G and App_Backup_Restore archived apks at 2.8 Gb. So, I copied the cwm backups folder to the real internal memory, now sdcard2. I assume this true internal memory might get wiped during a restore so, this is not a valid storage site for this? And, if I put copies on a spare card, will that really work if my downloaded apps are on the original card, eg does the CWM backup copy the external card apps?
As I note, for some reason this 'blobs' folder won't copy easily to a USB via the Thrive or Win 7 pc. It also won't copy to a Win 7 HD partition where I store my Thrive stuff. (Update: I was able to do a wireless transfer to my pc and then, from there, to a spare SD card.)
Any thoughts? Should I go back and change the mounts to default?
BTW, I find FolderMount has no real use with the changed mount on the Thrive unless someone tells me otherwise. With the Thrive mounting the external card as internal, files go to the physical card.
gberpa,
I don't understand your question - it is very long. But I know that custom recovery (CWM / TWRP) itself remounts sdcard and internal memory before wipe process so it will wipe correct memory (only internal memory). If you need to change the ROM you don't need to worry about mounting paths because after wipe mounting paths will be restored to original.
Partition layout of Toshiba Thrive 10.1" ICS
AmEv said:
Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Click to expand...
Click to collapse
Can you give us information on the Toshiba Thrive 10.1" ICS partition layout and their names, please?
We would like to compare it to ours Toshiba Excite Pro (AT10LE-A, tostab12BA). A Dirty Cow enabled KingoRoot has given us a temporary root.
[Q] How Root Toshiba Excite Pro AT10LE-A-108 by dexxxZ
https://forum.xda-developers.com/showthread.php?t=2583677&page=6
Sent from my takee 1 using XDA Labs