Related
and nothing I do get's it to go away. I have spent the better part of 8 hours screwing around with it and can't figure it out. Here is what I know:
If you just try and turn on the phone sans power cord, it won't turn on. If you plug it it, it displays the LG screen and stops. If you hold down the power, down, home keys, then power cable, it will boot into fastboot and take fastboot commands. I have followed the procedure to flash a recovery image listed here in the forums to no avail. It will erase the recovery, flash it, but will not reboot on the reboot command. When I disconnect the data cable and reconnect, it will go right back to the LG screen. I have tried KDZ and downloaded the original rom via the Original LG Firmware tool. It will communicate with the phone if I put the phone in emergency mode via the simultaneous back and volume down button while connecting the power cable. KDZ will start to install the rom but after some time, the phone spontaneously reboots and then hangs at the LG screen. Upon reboot back into emergency, the KDZ routine finishes and says it's finished but when I reboot it goes right back to the LG screen. I have tried the kdz tool in diag and emergency modes while shaking the phone. I have tried the software update tool but it says it cant communicate properly with the phone. I don't know what else to try.
Any suggestions?
Thanks a bunch!
After you succesfully flashed the recovery using fastboot, do you try to boot into recovery manually?
If that doesn't works you could try this http://forum.xda-developers.com/showthread.php?t=1827723
gabo_lope said:
After you succesfully flashed the recovery using fastboot, do you try to boot into recovery manually?
If that doesn't works you could try this http://forum.xda-developers.com/showthread.php?t=1827723
Click to expand...
Click to collapse
By recovery do you mean clockworkmod? If so, the phone is stock, unrooted so no, if not, what do you mean and how do I do that?
Thanks a bunch!
PS, If I follow the method I found for entering recovery it goes right back to fastboot.
PS Part two, the app you link did the same thing as I did manually and did not help.... thanks anyway...
J
Check if this thread helps...
forum.xda-developers.com/showthread.php?t=1827723
ROM - Paranoid Android By ByteCode.
Sent via XDA App.
"Hit ThanX if i helped u by anyway !"
jackler1 said:
By recovery do you mean clockworkmod? If so, the phone is stock, unrooted so .......
Click to expand...
Click to collapse
Hey jackler1, it will not allow you to install any custom recovery if your phone is still not rooted as you mentioned.
Hence using the Home+Vol-+power combo takes you to the fast boot screen.
1st thing you need to do is to root the phone, for it to allow installation of a custom recovery.
Many root tools are available for the P500 - eg Gingerbreak, Super one click.
try this for rooting - http://forum.xda-developers.com/showthread.php?t=1832485
pmvyas said:
Hey jackler1, it will not allow you to install any custom recovery if your phone is still not rooted as you mentioned.
Hence using the Home+Vol-+power combo takes you to the fast boot screen.
1st thing you need to do is to root the phone, for it to allow installation of a custom recovery.
Many root tools are available for the P500 - eg Gingerbreak, Super one click.
try this for rooting - http://forum.xda-developers.com/showthread.php?t=1832485
Click to expand...
Click to collapse
Hey,
I am unable to get into any other mode but fastboot or emercency mode so I have no idea how to root the thing. The thread you mention is of no help, thanks anyway and will take suggestions if you have them
DpAk007 said:
Check if this thread helps...
forum.xda-developers.com/showthread.php?t=1827723
ROM - Paranoid Android By ByteCode.
Sent via XDA App.
"Hit ThanX if i helped u by anyway !"
Click to expand...
Click to collapse
I had already attempted this method as well to no avail, thanks anyway!
Hi hope this makes sense to you. X1032 Rooted on 4.4.4 with stock rom. Downloaded update for lollipop however once installing it goes to about 30% in and errors. Phone then boots back into normal phone 4.4.4 saying unsuccessful. Then five times my phone randomly restarts itself into the custom recovery and tries to install the stock update and gives the message shown in the attachments photo. Any reason for this?
Thanks
Try updating with stock recovery and without root. It should work with an unlocked bootloader too.
Thanks for your reply, as this is my first time reverting back to stock recovery and also how to un root the phone what is the best guide for me to follow as i dont want to mess it up. As i do it once ill always remember for future issues. You can probs tell the version of custom recovery via the screenshots.
Many Thanks
To get back to stock, download your phone's stock ROM, extract the recovery.img file and flash it using the fastboot commands "fastboot flash recovery recovery.img" without quotes.
There should be an option in the root app to remove itself and unroot the phone.
Thanks alot will do that and let you know how it went weather it works or not.
Thanks again
If you want to maximize the chance that you'll get the OTA update installed, flash all partitions in fastboot. Note that motoboot file may not flash if your phone has a newer bootloader installed.
Hi did what you said on previous post and still errors and boots back to normal phone. Custom recovery removed and unrooted. Unrooted using the supersu app and did full unroot, as for going back to stock recovery couldn't find a stock recovery for this build phone so used the new mototool v3.1 program to flash stock recovery back to kitkat.
Any suggestions?
What is your phone model? Carrier?
Xt1032 and 02 pay as you go
Try and find you ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1 There are a few pages of ROMs for the Moto G.
audit13 said:
Try and find you ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1 There are a few pages of ROMs for the Moto G.
Click to expand...
Click to collapse
Thanks for your input and support, looked at that link and couldnt find the file i need. This screenshot in attatchments is the phone currently. Based on the screenshot is the file on this link below the stock rom? (its post #348)
Thanks also how would i flash this rom onto the phone and re write the firmware?
Thanks
Actually that link isnt working which of these two should i download?
Title: Android 4.4.4 - Blur_Version.210.12.40.falcon_utms.Retail.en.GB (Retail UK) (XT1032)
Filename: XT1032_RETAIL-GB_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml.zip
Title: Android 4.4.4 - Blur_Version.210.12.40.falcon_utms.O2SL.en.GB (O2 UK) (XT1032)
Filename: XT1032_O2SL-GB_4.4.4_KXB21.14-L1.40_37_cid7_CFC_1FF.xml.zip
NOTE: the o2 sim card is pay as you go and the phone was origionally on EE as a one month rolling service but with it been unlocked when i passed the phone over to my mam to use she was able to put here o2 pay as you go sim in and carry on using the phone on her origional sim.
Thanks
It looks to me like either ROM would work as they are both for the xt1032 but I can't say for sure as I have no experience with f;ashing either ROM.
Im guessing that if i download the generic rom and their should be a guide on here for flashing it? Am iable to take a backup of the current rom installed incase things mess up?
You could use ADB commands to create a backup but it's not that easy to do in my opinion without a custom recovery.
http://www.howtogeek.com/125375/how...kup-without-rooting-or-unlocking-your-device/
http://forum.xda-developers.com/showthread.php?t=2542219
Will create a new thread asking for the easiest way to reinstall a stock rom. Thanks for all your help you have been great!
major problems!!!!!
Stock recovery installed to phone. Started update it was installing and got to 3/4 of the way through, errored, restarted and not goes in a loop saying no command!
Phone will not switch on!!!
Why has this happened?
morgiee said:
major problems!!!!!
Stock recovery installed to phone. Started update it was installing and got to 3/4 of the way through, errored, restarted and not goes in a loop saying no command!
Phone will not switch on!!!
Why has this happened?
Click to expand...
Click to collapse
It doesn't power on or it goes to a loop saying no command?
Try the following:
1. Plug it into the charger
2. Hold the VOL DOWN key
3. While still holding the VOL DOWN key, press and hold the POWER key
4. Hold both keys down for over 120 seconds. This is more than two minutes and will seem like a long time. You might want to time yourself to make sure you hold it longer than two minutes.
5. After holding the keys down for more than two minutes, release them.
6. The Flash Boot screen will display, and the Normal Reboot option will be highlighted
7. Press the VOL UP key and the device will start a normal reboot.
If you have tried the above and it didn't work, try this:
Plug in the phone for 15 minutes.
Proceed to Step 2 above.
Lately i ve been having issues transfering files via USB to my Moto G 1st Gen (XT1034), so i looked through the web and i found out that if i changed my rom maybe i could fix it, so i decided to update my Moto G to Android 5.0 using Cyanogenmod 12, but i accidentally flashed a cwm version built for 2nd Gen Moto G and installed a rom built for 2nd Gen too that i had previously downloaded. After flashing and installing the rom it just bootlooped and now i cant transfer a Moto G 1st Gen rom to fix it!!! I ve tryed adb but i got "error: device not found", i ve also tryed manually installing those android USB drivers from a youtube video (Called How to Copy Files Over to your Android In a Bootloop with No OS using ADB!) but when i select the inf file i get a message telling me that those drivers are not supported on my 64 bit system.
Help me please im freaking out.
Ignadt said:
Lately i ve been having issues transfering files via USB to my Moto G 1st Gen (XT1034), so i looked through the web and i found out that if i changed my rom maybe i could fix it, so i decided to update my Moto G to Android 5.0 using Cyanogenmod 12, but i accidentally flashed a cwm version built for 2nd Gen Moto G and installed a rom built for 2nd Gen too that i had previously downloaded. After flashing and installing the rom it just bootlooped and now i cant transfer a Moto G 1st Gen rom to fix it!!! I ve tryed adb but i got "error: device not found", i ve also tryed manually installing those android USB drivers from a youtube video (Called How to Copy Files Over to your Android In a Bootloop with No OS using ADB!) but when i select the inf file i get a message telling me that those drivers are not supported on my 64 bit system.
Help me please im freaking out.
Click to expand...
Click to collapse
Deep breath! What can you access on your Moto G and where does it freeze? Can you enter fastboot mode? What OS/computer are you trying to get adb up and running on?
For fastboot mode, fully power off your device, press and hold down the volume down key, and then press the power button for about three seconds and release it. You should have a menu come up here with some options; under this mode, it is possible to manually restore a ROM and recovery. If you can get this far, you can relax a little and we can go from there.
a_gert said:
Deep breath! What can you access on your Moto G and where does it freeze? Can you enter fastboot mode? What OS/computer are you trying to get adb up and running on?
For fastboot mode, fully power off your device, press and hold down the volume down key, and then press the power button for about three seconds and release it. You should have a menu come up here with some options; under this mode, it is possible to manually restore a ROM and recovery. If you can get this far, you can relax a little and we can go from there.
Click to expand...
Click to collapse
First of all, thanks for replying. It doesnt freezes, my adb doesnt find my device. Yes, i can enter fastboot mode and i can enter recovery mode. I ve tryed running adb on Win7 and Win8.1. I feel quite relaxed with your asnwer now jajajaj.
Ignadt said:
First of all, thanks for replying. It doesnt freezes, my adb doesnt find my device. Yes, i can enter fastboot mode and i can enter recovery mode. I ve tryed running adb on Win7 and Win8.1. I feel quite relaxed with your asnwer now jajajaj.
Click to expand...
Click to collapse
The fact that you can enter both fastboot mode and recovery mode means you're probably fine. Read through the thread here about adb and fastboot (check both the OP and the last couple posts, as they direct you how to solve what I imagine is your issue):
http://forum.xda-developers.com/showthread.php?t=2537083&page=2
Also, read through the OP and the latest posts (4.4.4 requires extra commands because there are more files) to learn about manually restoring stock firmware here. This would put you back to your original state and original factory recovery and you can essentially start from scratch as a last resort:
http://forum.xda-developers.com/showthread.php?t=2542219
If your recovery is working, is there a reason you can't just copy a new ROM onto your "sdcard" by mounting it over USB and flash that via recovery? If your recovery is shot, you may be able to manually restore the recovery using fastboot (ie. "fastboot flash recovery your-recovery-goes-here.img") and then reinstall an appropriate ROM from CWM/TWRP/Philz, whatever recovery you install, by wiping and copying the zip over USB onto the internal memory or by sideloading it using adb once you get that working.
Ask if you have any questions and take it slow! Anything you're doing now is risky, so you really want to measure twice and cut once.
a_gert said:
the fact that you can enter both fastboot mode and recovery mode means you're probably fine. Read through the thread here about adb and fastboot (check both the op and the last couple posts, as they direct you how to solve what i imagine is your issue):
http://forum.xda-developers.com/showthread.php?t=2537083&page=2
also, read through the op and the latest posts (4.4.4 requires extra commands because there are more files) to learn about manually restoring stock firmware here. This would put you back to your original state and original factory recovery and you can essentially start from scratch as a last resort:
http://forum.xda-developers.com/showthread.php?t=2542219
if your recovery is working, is there a reason you can't just copy a new rom onto your "sdcard" by mounting it over usb and flash that via recovery? If your recovery is shot, you may be able to manually restore the recovery using fastboot (ie. "fastboot flash recovery your-recovery-goes-here.img") and then reinstall an appropriate rom from cwm/twrp/philz, whatever recovery you install, by wiping and copying the zip over usb onto the internal memory or by sideloading it using adb once you get that working.
Ask if you have any questions and take it slow! Anything you're doing now is risky, so you really want to measure twice and cut once.
Click to expand...
Click to collapse
oh thank you so much my phone is working again!!!!!!!!!!! :d :d :d :d :d :d :d
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice
Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.
It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?
error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.
zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse
i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!
mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"