Hi,
I flashed Gingerbread ROM on my Galaxy TAB. Works perfectly.
However when I connect to Kies, it says this device can not be updated. So after having a feel of gingerbread I decided to flash the stock ROM - DDJK3 ( Asian - India ) . It flashed fine and boots into fryo with all correct version and Kies also recognize it and says that this is the latest firmware.
The only problem is that TAb reboots itself if I do one of the following:
1) Try to 'add a wifi connection' : the manual way
2) Screen times out
3) press the power button once to lock screen ( guess same as no 2)
Though I like Gingerbread and will switch back to it, just wanted to use the DDJK3 stock ROM in case I have to take it back to service center, and also out of the DAMN curiosity ...
Has anyone faced this problem and found a solution ...
Best Regards
Hello,
I just updated the firmware of my brand new Note 10.1 (N8000) using Kies, which seems to have failed - I can't even turn the device off. I'm a quite experienced computer user, but brand new to Android. Any help or feedback would be very much appreciated (esp. how I can at least turn off the device).
Problem Description:
I have a new Note 10.1 (a German device/I'm in Germany using the Vodafone network, but I guess that shouldn't matter) and installed Kies today. The application identified a new firmware and suggested an update, which I did via USB. Everything appeared to have gone all right - the file got downloaded, transferred to the device, which then showed that it was installing the updates (something like 95 items). No error message. The device then booted, and that's where it seems to be stuck: since then, the device is in an endless loop: Screen is black, a swirling animation comes up, than the Samsung Logo, which stays for like 12 seconds, the screen goes black and it starts from the beginning (in total the loop takes like 15 secondes). Kies cannot connect to the device, and I can't even turn it off, it's just stuck in this endless loop.
Before the update, the device was neither modified nor rooted (I only installed a few apps), and there was no error message during the update (at least none that I saw).
Can anyone help???
Get the firmware file from sammobile and flash with odin. You can find a lot of how to regarding Odin, just do a search and you will find a movie or tutorial.
Here is the fw
http://www.hotfile.com/dl/178817278/616d7ef/N8000XXBLJ9_N8000OXABLJ9_DBT.zip.html
The link is from sammobile, not a mirror, so it's safe.
Or you could just return it for an exchange.
Sent from my GT-N8010 using Tapatalk 2
To turn off, just press power until it turns off (about 10 seconds)...
Kies firmware failed N8010
ultramag69 said:
To turn off, just press power until it turns off (about 10 seconds)...
Click to expand...
Click to collapse
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
EagleTalon1 said:
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
Click to expand...
Click to collapse
I'm having the same issue!!!!!
Kies failed! Odin PASS and stuck in the logo!, it doesnt boot!
You may need to go into recovery and wipe data/cache partition. This will wipe your internal memory of everything but you will get an operational note...
Greetings;
Tonight, my friend and i wanted to root her phone... (Samsung Galaxy S2)
Unfortunately, not everything went as planed..
Files downloaded: Odin, SuperSU rooting, cm-11-20141119-NIGHTLY-i9100 and google apps and kernel..
First, we flashed kernel via Odin..then installed SuperSU from the recovery...Then the installation for Cyanogenmod11 failed...After that, the phone would not turn on..
Then, we downloaded firmware of the S2...flashed it via Odin..it stoped at 90-95% (or something like that)..and it said FAILED..
Then she turned off her phone..and the error appeared..“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
..She couldn't get pass that message..She turned of her phone, got the battery out for 10 sec.. She cant enter the download mode nor the recovery mode..
Please..i beg you for some help.. ..I would hope that this resolves with a successful fix..i wouldnt want to be responsible for anyone's phone nor do i wish to see her disappointed...
Thanks in advance
Cheers
Hello,
I've a wifi problem with my Samsung Galaxy S4 (GT-I9505). I had CM11 on my phone, but I don't like it anymore so I wanted to uninstall it. I followed this guide: http://forum.xda-developers.com/showthread.php?t=2265477&page=346. I've installed the official stock firmware ''Latest lollipop 5.0.1'' with Odin3 v3.10 from the 2nd post in that topic.
The installation went fine. After the installation the only thing is that my wifi won't turn on. When I push the button, the wifi turns on, but directly after that it turns off (in 1 s). I've tried it many times, I've done a factory reset, wiped the cache etc. but still it won't work.
I followed the guide properly.
What can I do to solve this problem? Thanks in advance!
Hi,
Thanks for using XDA Assist Please reinstall stock firmware and see that you are flashing right Stock Firmware available for your region Factory Rest after flash
Good Luck!
Hi I have a G920w8 MM 6.0.1 where the wifi is stuck at tuning on.
The bluetooth is working fine
I can see the wifi mac address in settings/about
I reflashed ODIN same stock firmware same problem
I reflashed stock using smartswitch same problem
I root / TWRP and tried alexis and XtreStoLite and still stuck at turning on
Even if the bluetooth and wifi are on the same chip can it still be a hardware issue?
thanks