phone is hard bricked i tryed turning it on it wont work i cant get into bootloader download mode any mode what happend was i tryed to add custom rom i added wrong one so its hard bricked is there a master reset for this phone/? all i can seem to find is hard reset and soft reset witch dnt work i tryed adb and anything adb related it cant recongize it at all since this phone is hard bricked all i get is ld flashing red when i put in computer but thats all it can do when i plug it out soon or later red flashing will stop .. iv even used tool-alpha-zte-warp-4g-unbrick-tool on andriod fourms but no luck so if i get this fixed how much u think it would cost? is there a reset button in this phone like if u take it apart? iv tryed everything iv tryed looking everyware theres alot of zte phones but this one barly any supoort please some 1 help oh is there a mastery reset? and when i go under device manger it shows qhsusb_dload what does that mean iv looked online says hard brick but for this phone im not sure remember i cant get into any mode thanks for everyone for trying to help if u do
Related
hi guyz,
i'm super depressed now, need help from you all. i've got an xda neo G4 today n wanted to upgrade to an english version. so half way it came out funny funny languages on it n i restarted it. it loaded until the second splash screen n juz hanged that.. tried the hard reset but it was still the same...
i saw at the forums saying that it can be rescued as long as i can access the bootloader mode.. but then my sinc device cant detect my phone tru the usb port when i'm in that mode.... n the upgrade couldnt be carried out coz it cant be detected...
the "mobile device" does appear in "my computer" but it is empty inside... n seems like i couldnt do anything about it..
could i change a new phone at the shop if its still under warranty??
or is there any other ways to rescue it? very depressing, because it suppose to be a present for my girlfriend.. argh~
thx loadz for ur help
brokenlickz said:
hi guyz,
i'm super depressed now, need help from you all. i've got an xda neo G4 today n wanted to upgrade to an english version. so half way it came out funny funny languages on it n i restarted it. it loaded until the second splash screen n juz hanged that.. tried the hard reset but it was still the same...
i saw at the forums saying that it can be rescued as long as i can access the bootloader mode.. but then my sinc device cant detect my phone tru the usb port when i'm in that mode.... n the upgrade couldnt be carried out coz it cant be detected...
the "mobile device" does appear in "my computer" but it is empty inside... n seems like i couldnt do anything about it..
could i change a new phone at the shop if its still under warranty??
or is there any other ways to rescue it? very depressing, because it suppose to be a present for my girlfriend.. argh~
thx loadz for ur help
Click to expand...
Click to collapse
it doesn't matter if active sync does not recognize it. just run an official upgrade
Hey, that just happened to be today....but the answer is in this forum http://forum.xda-developers.com/showthread.php?t=288266
Check out RaptorRVL's instructions. His explanation was completely correct.
But just to give u a heads up, the "ROMUpdateUtility_NoID.exe" can be quite confusing.
So what i did was rename "ROMUpdateUtility.exe" (from ROMUpdateUtility-NoVendorID.zip) to "ROMUpdateUtility_NoID.exe" and pasted it to the WWE folder with everything else.
Hope it works for u too
thx conix!! i'm almost there!! ahaha.. but i stil have some questions before i do this "major" (to me at least) operation...
which means that there are 2 .exe files?
1) first is called "Romupdateutility"(in bold letters)with another line following under without bold letters n then HTC
Example on the screen:
(icon)ROMUpdateUtility
(icon) ROMUpdateUtility
(icon) HTC
2)the second one is called "Romupdateutility_NoID" in bold(which i suppose to change the name to _NoID)... the next line is still the same RomUpdateutility without bold letters n followed by HTC
(icon)ROMUpdateUtility_NoID
(icon) ROMUpdateUtility
(icon) HTC
please correct me if i'm wrong.. i dun wana brick my phone~ sobz..
ohya, i'm not sure whether it is CID locked or unlock.. does it play any role to this upgrading, sorry.. i know its somewhere in the thread but when one gets nervous, one couldnt think properly anymore..
ahaha.. pda rescued!! thx loadz to this wonderful forum n contributors!!))))) thumbs up man~~!!!!
Hi everyone, please get help for my GooPhone Y5 T_T
What I did :
When I was flashing this ROM --> http://forum.xda-developers.com/showthread.php?t=1729056
it was moving till 21%.. and I'm so careless and loose the usb plug out.. and the process was stopped. Then I'm trying to plug in 2nd time, it can't recognize the device(so it wont flash any ROM), then I keep on reinstalling the driver, but it couldn't works anymore..
It coded an error as "code 43" on device manager, so i went to search about this error, they say make a full reset of the computer, but it still wont work:crying:..
now my phone cant even switch on..:crying: please help.. sorry for my bad english..
Please any genius help me..
garykhx said:
Hi everyone, please get help for my GooPhone Y5 T_T
What I did :
When I was flashing this ROM --> http://forum.xda-developers.com/showthread.php?t=1729056
it was moving till 21%.. and I'm so careless and loose the usb plug out.. and the process was stopped. Then I'm trying to plug in 2nd time, it can't recognize the device(so it wont flash any ROM), then I keep on reinstalling the driver, but it couldn't works anymore..
It coded an error as "code 43" on device manager, so i went to search about this error, they say make a full reset of the computer, but it still wont work:crying:..
now my phone cant even switch on..:crying: please help.. sorry for my bad english..
Please any genius help me..
Click to expand...
Click to collapse
Bumped. I'm having this problem as well.
I'd guess you're hard bricked and need JTAG repair if it's available for your phone.
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
How can I unroot/brick my phone ?
I´ve tried EVERYTHING mut nothing helps cant accsess in downloadmode an hard reset wont work what to do? Need help fast because my moms
gonna kill me if she hears about it . sorry my bad english .
net DOESN´T help me
I´ve been googling for two hours and none of the methods helped me what to do ??
someone help fast
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.