rename HTC One X error - General Questions and Answers

hi
im trying to rename my phone to fix the wifi issue, but when I go i try to rename the device in wifi direct to "HTC One" it gives the error "failed to rename device"
any help would be appreciated thx

Related

Dead S100?, Did I kill it? HELP me plz...

I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
embraser said:
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
Click to expand...
Click to collapse
That's the country id error normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here
I tryed using this:
MaUpgradeUt_noID.exe
but got a .dll error
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
kta said:
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
Click to expand...
Click to collapse
I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?
I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
HighPingBastard said:
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
Click to expand...
Click to collapse
6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......
cheeeeeeeers
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
embraser said:
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
Click to expand...
Click to collapse
Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.
The folder you extract the rom to should have the following files visible.
EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
copy over the no country file and re run it following the above instructions.
I did all you told me to do, downloaded the
ma_tmde_10601_130_10500_ship.zip
extracted the
MA_TMDE_10601_130_10500_Ship.exe
then right-clicked on it an there's no extraction option, only compression on winrar.
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?
dary said:
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Click to expand...
Click to collapse
after that is there any way to put it in english?
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Now your s100 will be able to turned on =)
and after that an error
then this happens...

error [240] File open.....Please help

Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Thanks in advance
any ideas guys ???
Thanks
You most likely need to copy the nk.nbf file into the same directory as the romupdateutility.exe file.
I am having the same problem with my new mda IV compact i have tried to load the rom in every different way but still the same message comes up, i am trying to change radio settings to the 06 version. i have done the spl load but can't do a flash rom. any ideas please
I have the same problem i have installed HardSPL
But when i try to run the roms KaiserCustomRUU this error pops up
is there a certain program i should be using to run it? or did i save it wrong?
Make sure the phone is in active sync mode. My diamond i had this problem then realized that i had it in disk drive mode. switched it back and i was fine.
hey.. problem solved for me.
Click that "View README" button right next to the llast button you click before you get the error.
Where is that file located on your computer? For me it didnt load, but it said "could not find file at c:\windows\system32\readme.doc".
I took the cue, and moved my *.nbh file into the system32 folder. Voila! It was weird because I was running the ruu.exe file from the desktop (on a vista PC). I guess for some reason it was looking in system32??
So give the above a try. Might work for ya
Hi,
I am havıng the same prob.
I have trıed everythıng already lısıted ın here to no provail. The weırd thıng ıs that I have already used thıs rom.
I downloaded ıt and flashed my devıce but was havıng problems wıth hard resets occurıng randomly.
I read up on the rom (Dark vısıon) and ıt warned of thıs and suggested ınstallıng a dıfferent rom then tryıng agaın.
I ınstalled the recomend rom but when ı went to try and ınstal dark vısıon agaın...
for me it helped to just change the .image name to .nbh and it updated..
Daniel
I moved all the files to my desktop and it worked for me.
The last help was very usefull for me..
Regards,
im having the same problem on my HD2 can someone please help me
I also have the same problem, i tested all previous ways but nothing. Can you help me, thanks, My phone is not "company unlock" , i dont know whether it is due to locked phone.
I can't even find the NBH file. Virus software is disabled - anyone come across this one?

Write-protection help please!!

hi, iv got the htc touch diamond, and i cant rename, move, delete etc any of my files as i get the error message saying "Be certain that the file is not write-protectered and is currently not in use" anybody no how to make my files non-protected? Thanks

[Q] update-cm-7.1.0-RC1-IncS-signed does not update on Incredible S

can any one help ? it gives me the error which reads vivo something and the zip file has errors.

problem with wi-fi

hi
i have a problem.. when i want turn on the wi-fi, an error occurs that says:
"unable to search" ..and then, turns of..
can any one help me?
please someone do this, for me:
with root explorer go to system/bin and copy the file: wpa_supplicant
and upload it for me.. this must help..
sorry for bad english

Categories

Resources