Database Info

[Q] Help to flash Note 2 with stock ROM 4.3

Hello
I decided to try jedi master x2 (the version of my stock ROM was 4.3). After trying it out for a while I noticed poor battery performance and when phone was locked I had to press the menu button several times to see the screen. Yesterday my phone was booting up by itself. It did a couple times then got stuck with the samsung logo. Reboot again and again and the same stuff happened that's when I decided to flash stock rom from samsung.updates/device site using odin3 v3.09 however, I have not been successful. After it checks the md5 OK, it fails on the NAND write. Is it the case that the NAND memory is not unlocked? I am still able to boot into recovery though. I'd appreciate if anybody can land me a hand on how to flash stock rom on my device.
Thanks
** Update to the issue above 1/13/14 8:24 AM
I use ODIN 3.09 to upload the md5 I got from samsung.updates.com I get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am able to boot into recovery mode. I have not tried to upload any other ROM to my sdcard and install it there. The stock ROM I had before was Android version 4.3.
I read this post http://forum.xda-developers.com/showthread.php?t=2470262&page=3
then I looked at my device and read the following:
custom binary download: Yes (1 counts)
current binary: custom
system status: custom
knox warranty void: 1 <--- I think that's the problem
As you may know knox is a security feature which helps you to securely separate your personal and professional data. Well, in my case is not helping at all.
Another question: How am I going to remove knox with my phone only able to get into recovery or download mode?

[Q] Pretty Sure I Killed my Phone

I've been running CM on and off on this thing for almost 2 years straight upgrading all along the way (including nightlies as recent at late july this year) well after dealing with some instability issues I figured I'd try to flash my phone back to stock and see if I could get things back fully operational GPS, non-crashing chrome etc.
So I fired up Odin 3.07 and tried flashing a 4.3 ROM to it and it's been down hill from there.
I should have done more research before attempting the restore but tried the method that worked in the past of just getting a copy of stock ROM and flashing it with Odin.
After the initial flash returned a failed result, I tried rebooting the phone and trowing in the towel, but apparently I jacked up my bootloader and now I can't flash my phone at all.
I tried both methods in the next link including re-partitioning with pit files at the bottom of the article and no luck, I also tried "upgrading" with Kies and that fails too.
http://forum.xda-developers.com/showthread.php?t=2586319
I've tied just about every stock version I could find and all that happens is the update fails with an output like whats shown below.
Update1: I've also tried the debricking procedure in this forum with no luck.
Has anyone seen this behavior?
Sorry if this post lacks details.
--Phone Output--
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 1
--Odin Output--
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_I535VRUCNC1_I535VZWCNC1_2198062_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

You updated to a version with a locked bootloader...
JTAG seems to be the only solution at the moment.

0xDFA said:
You updated to a version with a locked bootloader...
JTAG seems to be the only solution at the moment.
Click to expand...
Click to collapse
I was afraid that was the case.
Thanks for the feedback.

Softbrick Struggle...

EDIT: Random success with Verizon tool No idea what changed...
This is what I was seeing when I tried to use the Odin method of unbricking, it would get ~halfway done and then fail.
Tried again with the PIT file and again failed about 50% of the way through.
4.3
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Warranty Bit:0
Bootloader RP Swrev: 1
I then tried the Verizon Assistant method and it got to 86% then said my device was disconnected unexpectedly and I get this.
Product Name: SCH-I535
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Bootloader RP Swrev: 2
Decided to try once more and ended up seeing this in all red letters
sw rev check fail : Fused 2 > Binary 0
I then tried using this method to unbrick http://forum.xda-developers.com/showthread.php?t=1840030 and Odin fails when I try to push the bootchain.
Message log from Odin when I push the bootchain
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRALEC.bootchain.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm at a loss here I don't care what I have to update to but I've spent hours trying to solve this mystery any assistance would be greatly appreciated. I can still get to the download screen so I'm not hardbricked.

[Completed] Galaxy S4 Flashing Errors...

(Sticker Info)
Samsung Galaxy S4
Model: GT-I9505
FCC ID: A3LGTI9505
SSN: -i9505GSMH
(Software Info)
Model: GT-I9505G
Android Version: 4.4.2
Baseband Version: I9505XXUFNA5
Kernel Version:
3.4.78--KT-SGS4-KK4.4-TWGE-INTL-02.05.2014---g5601ab2
[email protected] #1
Wed Feb 5 12:08:05 MST 2014
Build Number: KOT49H.02.18.2014
Warnings on boot up:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit: kernel
(The phone has been rooted previously but has been unrooted, TeamWRP is installed)
I rooted my phone a while ago and tried loading a custom ROM. However I definitely installed the wrong ROM as the kernel that came with it would not work, I then installed a custom Kernel to get the phone to a usable condition. This has been fine up until recently when certain apps claim the phone is rooted or crashing unexpectedly and also claiming the phone is a security violation.
I'm trying to restore the phone to the factory Samsung TouchWiz ROM/Google Android Factory ROM with no errors.
(Attempted flash 1)
I did try the flashing method with a stock ROM with Odin but this happened:
Odin3 v3.04
tar file = I9505XXUEMK9_I9505H3GEMJ2_H3G.zip 1.43 GB
Odin Log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505H3GEMJ2_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Android Log:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM SATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
SW REV. CHECK FAIL : fused : 4 , Binary : 3
The phone booted saying “Firmware upgrade encountered an issue. Please select firmware recovery mode in Kies & try again.
Problem is the phone isn’t being detected by KIES. So I went to my backup but now I'm back to square one.
Any thoughts or help will be greatly appreciated.

Your best bet is to ask your question here
That's a great help thread for your issue.
Good luck

Thanks!
Thanks very much!

falshing other roms help !

hello
i have a problem , i can flash new costums roms , but i cant get back the stock with odin please help
in odin mode shows
--------------------------------------------
Odin mode
product name : SM-G900p
Current binary : custom
system status : custom
reactivation lock ( kk) : off
knox warranty void : 0x1 (4)
qualcomm secureboot : enable ( csb )
rp swrev : s1 ,t3 r1 a3 p1
secure download enable
udc start
----------------------------------------------------------
and after adding the stock rom in AP and clicking start it shows :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
------
And on my phone shows
SW REV CHECK FAIL :[aboot] Fused 3 > Binary 1
---
i have tried those ones :
G900PVPU1ANCB_G900PSPT1ANCB_SPR
and
G900P_NKD_FullRestore.tar
and it gives me the same error
imageshack.*****com/a/img923/5454/PmP1X7.jpg
imageshack.***com/a/img924/606/6WnxEU.jpg
imageshack.**com/a/img921/1732/nb7OIt.jpg
Please Delete the starts on the link

try OK4. That one seems to be the most bulletproof

Wipe everything in twrp then try to install a stock ROM. If that doesn't work try a different stock ROM

youdoofus said:
try OK4. That one seems to be the most bulletproof
Click to expand...
Click to collapse
thanks for you help, i will test it ^_^ and i will see if its work or no
i7vSa7vi7y said:
Wipe everything in twrp then try to install a stock ROM. If that doesn't work try a different stock ROM
Click to expand...
Click to collapse
i did :/ isnt working

yassinehari said:
thanks for you help, i will test it ^_^ and i will see if its work or no
i did :/ isnt working
Click to expand...
Click to collapse
tried a different cable and/or a different computer?

Reactivation lock is a note thing, not galaxy.
I believe. .

yassinehari said:
hello
i have a problem , i can flash new costums roms , but i cant get back the stock with odin please help
in odin mode shows
--------------------------------------------
Odin mode
product name : SM-G900p
Current binary : custom
system status : custom
reactivation lock ( kk) : off
knox warranty void : 0x1 (4)
qualcomm secureboot : enable ( csb )
rp swrev : s1 ,t3 r1 a3 p1
secure download enable
udc start
----------------------------------------------------------
and after adding the stock rom in AP and clicking start it shows :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
------
And on my phone shows
SW REV CHECK FAIL :[aboot] Fused 3 > Binary 1
---
i have tried those ones :
G900PVPU1ANCB_G900PSPT1ANCB_SPR
and
G900P_NKD_FullRestore.tar
and it gives me the same error
imageshack.*****com/a/img923/5454/PmP1X7.jpg
imageshack.***com/a/img924/606/6WnxEU.jpg
imageshack.**com/a/img921/1732/nb7OIt.jpg
Please Delete the starts on the link
Click to expand...
Click to collapse
Try using twrp 3.0.0. I've had the same problem before. Also use Odin 3.09. I never have a problem when using those two. Make sure you have USB debugging enabled in developers menu. Tap build in device info 7 times to activate developer options. Hope this helps. Also if your on lollipop you can't flash kit kat firmware. Try BOG1 or if you want MM use CPCA.