Q&A for [KERNEL][SINGLE/DUAL BOOT][JB/KK][STOCK/CM]blackhawk's NEXT kernel 2.4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][SINGLE/DUAL BOOT][JB/KK][STOCK/CM]blackhawk's NEXT kernel 2.4. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Tell me how to turn swap? Does not work
Anyone who knows how to Get f2fs
camera not working
I have P5113. I tried to set up dual boot with Shakatu Zap Blaster V2.3 Rom and Slimkat 4.4.4 build 9.0 official Rom. I made Slimkat the primary rom while Shakatu was the secondary rom. I followed the instruction of flashing the next kernel 2.4 and the proprietary samsung update zip to each of the roms. Everything worked fine except the camera on the Slimkat Rom which is the primary rom. When I try to connect to the camera through the native android camera app or the google camera app, it tells me "it cant connect to camera". what is the problem and how can I fix this?
claretanthony1 said:
I have P5113. I tried to set up dual boot with Shakatu Zap Blaster V2.3 Rom and Slimkat 4.4.4 build 9.0 official Rom. I made Slimkat the primary rom while Shakatu was the secondary rom. I followed the instruction of flashing the next kernel 2.4 and the proprietary samsung update zip to each of the roms. Everything worked fine except the camera on the Slimkat Rom which is the primary rom. When I try to connect to the camera through the native android camera app or the google camera app, it tells me "it cant connect to camera". what is the problem and how can I fix this?
Click to expand...
Click to collapse
Reflash the bloob n make sure to choose the right one. But thus steps for p31xx, hope p51xx has same way, just recheck the original thread.
Slim rom compatibility
Hi,
I'm very noob at this, so i need to know if this kernel is compatible with slim rom.
Thanks
Related
Q&A for [ROM][4.3.1][3.4 & 3.0 kernel] Unofficial Cyanogenmod 10.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.3.1][3.4 & 3.0 kernel] Unofficial Cyanogenmod 10.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rhmmm
I'll try
Viber
Thank you for this rom,is very good rom.
But i have a problem with this
I install viber on this rom,but it can not run
unfortunately has stopped
Camera focus and lockscreen delay problems
Almost entire rom works fine, but I can't solve problem with long delay (3-4 seconds) of lockscreen before the screen turns on and autofocus works as bad as it won't work.
Kernel 3.0 (flashed boot.img from the rom)
cm-10.2-20131110
links are broken for downloading
Can anyone provide download links?
anuj222277 said:
Can anyone provide download links?
Click to expand...
Click to collapse
this rom are outdate. use betakitkat or samrom
JavierG123 said:
this rom are outdate. use betakitkat or samrom
Click to expand...
Click to collapse
IN SAM ROM WHATSAPP NOT WORKING ON MOBILE INTERNET
NOW I M ON VIPER 5.1
LOOKING FORWARD TO
New Jellybean VilleC2 rom with Lollipop theme and modules
I CAN HELP WITH THIS IF SOMEONE HELP
anuj222277 said:
IN SAM ROM WHATSAPP NOT WORKING ON MOBILE INTERNET
NOW I M ON VIPER 5.1
LOOKING FORWARD TO
New Jellybean VilleC2 rom with Lollipop theme and modules
I CAN HELP WITH THIS IF SOMEONE HELP
Click to expand...
Click to collapse
In Sam rom your whatsapp not working because you don't configure your apn. I'm in Sam rom and every app work fine
JavierG123 said:
In Sam rom your whatsapp not working because you don't configure your apn. I'm in Sam rom and every app work fine
Click to expand...
Click to collapse
everything except whatsapp working fine. such as chrome, ebay and many more
JavierG123 said:
In Sam rom your whatsapp not working because you don't configure your apn. I'm in Sam rom and every app work fine
Click to expand...
Click to collapse
not work called whatsapp for me
Q&A for [KERNEL][SPR][TW-AOSP 4.4][11/27/2014] KT-SGS5 - NI2 - KTweaker
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][SPR][TW-AOSP 4.4][11/27/2014] KT-SGS5 - NI2 - KTweaker. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
can i use this asop 5.0 kernel on G900P_NKD.5.0.Odexed.Test.zip?
hello. newbie here. first of all thank you for your cool kernels. I was wondering i can use your kernel 5.0 asop on this new rom G900P_NKD.5.0.Odexed.Test.zip or not? thnaks
eevanskiteboards said:
hello. newbie here. first of all thank you for your cool kernels. I was wondering i can use your kernel 5.0 asop on this new rom G900P_NKD.5.0.Odexed.Test.zip or not? thnaks
Click to expand...
Click to collapse
No don't do it. Aosp kernels are for aosp based roms. Nkd is stock based, you will have to wait for a tw version of KT
Wondering if there is a way to get themes for this new twrp 2.8.2.0 version?
Love this Kernel!
ktoonsez, what Lollipop do you personally use or prefer for your S5?
(that I could use your Kernel with).
lollipop 5.0 touch wiz
Do u know when u will be able to build a kernel that will work on the sprint s5 touch wiz 5.0?
i can confirm that the kernel is working on touchwhiz and fusion rom 5.0 (sprint) with no boot problems or f.c's. etc.. thanks for the kernel
AOSP Lollipop 5.0 VERSION.
I assume your new kernel (above), will work on "[STOCK ROM][5.0] NKD Android L Odexed" ?
That rom is NKD based, your kernel is NL9 based.
I don't see a NL9 firmware we can flash onto our G900P.
Well I flashed:
Touchwiz Lollipop 5.0 VERSION: 01.03.2015
and now I can not connect to the camera with any camera app.
I apply the nightly builds of CM12 every day.
Do I need to re-install this kernel?
What ROM(s) are TouchWiz lollipop that will work on my kltespr? I see new kernels for TW 5.0, but what can I run this on?
Out of curiosity. How do scripts work. Why aren't there any in the shop?
Sent from my SM-G900P using XDA Free mobile app
Hey guys,
How do I flash the 09/01 kernel with CM12 20/01?
I've been running CM12 already but having the Bluetooth issues. I've downloaded KT-SGS5-LP5.0-AOSP-G900-01.09.2015.zip but when I go to flash it from recovery it says zip signature verification failed. Do I have to untick the verification?
Thanks.
hello,
just installed the newest kernel 2-11, thank you. I noticed one problem that I think is kernel related, but not to sure. when i open my camera app, it shows blue lines in the photo. i did not have this problem earlier today when I used the camera, weird. any opinion? i am currently running fusion 5.0 on OA6 with
thanks
Anyone have any issues with Private Mode not working after running KTweaker kernel
Dumb question can this run on MOAR 6.1 ?
philiptibbs said:
Dumb question can this run on MOAR 6.1 ?
Click to expand...
Click to collapse
Check out the MOAR FAQ. Yes, you can. You even had the option to install it when you flashed MOAR 6.1.
I just updated to version 9, dated 2/26. However, I'm unable to get any signals..... I had to go back to version dated 2/25.
Any ideas?
Problem with 2-26-2015 kernel - Modem stopped working (Sprint)
On the 2-26-2015 kernel, my phone modem would not connect to Sprint. This also prevented WIFI calling to work as well.
I had to revert back to the 2-25-2015 kernel.
When I flashed 2-26, I wiped dalvik/cache afterwards.
Anyone able to reproduce this?
I flashed 2/26/2015 and the phone was not getting any signal. It said that it kept telling me to insert a sim every time I tried to do something that needed the network. I also went back to 2/25/2015
Q&A for [ROM][PORT][JB 4.1.2] MIUI ZTE v970 (MT6577)[MULTILANG]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][PORT][JB 4.1.2] MIUI ZTE v970 (MT6577)[MULTILANG]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
@superdragonpt.
Are you planing to release new version of MIUI. I hope so.
Thanks for yours hard work! Keep going! Comunity needs you
@superdragonpt are you planing to make a release new version of this rom?
I installed custom kernel v1.4 for miui and phone start to react strange. From time to time when I was trying to unlock phone display wake up and then got blank again. After serveral tries phone has woke up. This was happening quite offten.
I really love this rom. Can you put some effort for it. Thanks !
Maybe miui v5 will be good idea
I won't make or port no more JB ROMs..
Now that KitKat ROM is stable, there's no reason to continuing working on an old and deprecated OS like jellybean.
About kernel, I had explained that issue several times, go back to kernel miui v1.3.
V1.4 is incompatible with some hardware revisions.
Regards
superdragonpt said:
I won't make or port no more JB ROMs..
Now that KitKat ROM is stable, there's no reason to continuing working on an old and deprecated OS like jellybean.
About kernel, I had explained that issue several times, go back to kernel miui v1.3.
V1.4 is incompatible with some hardware revisions.
Regards
Click to expand...
Click to collapse
I understand the reason why you don't want to continue with this rom.
For kernel 1.4 it's working fine in bruno mod 1.3 I'm using yours custom kernel since begining but with other roms. My gf got Redmi 1S and I really like it and I wanted to try it on my V970 I was working fine but without custom kernel.
Ideally it will be great to have MIUI v5 based on KitKat. Do you think that this is possible ?
I'm keeping my finger crossed to have this.
Thanks for yours hard work SuperDragon !!! you are really rocking outs v970
Can't find donwload section
Hi, i'm new here and i cant find the download section to download a ROM.
Any help would be aprecciated.
I am looking for Custom Rom for MTV volt 1000.
Can i use this custom ROM in my MTV volt 1000 ?
will it support ?
Q&A for [ROM][4.2.2r1]p6800/p6810/i815](5OCT2013)PAC-Man ROM 4.2 Milestone1 release
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.2.2r1]p6800/p6810/i815](5OCT2013)PAC-Man ROM 4.2 Milestone1 release. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
super rom
This ROM is perfect... Old stuff? Yes but awesome stuff... I wonder is PAC ROM could enter the lollipop era... Everything about this ROM is better than all the other custom Romsin terms of it overall feel and performance...its more stable. No rotation distortions like the paranoid, camera flash works on first try, apps r stable when active.. But performance slightly enhanced than paranoid...
WiFi connections responses r a bit slow but browsing is good.. U just change some few IP resource files and apks, its works OK... It don't heat so much like the newer Roms with their newer kernels and stuffs.. I think the older stuffs seem to control the tab very well than the new ones.. It doesn't have any temperature reading stuffs inbuilt I'm guessing but its working great for me... I wonder if PAC man will have a lollipop version as well..
And also, newer google play services are a bit difficult for me to replace the old gmsCore in the root directory, can someone teach me where I'm not doing right in the system? Cos replacing it ddoesn't work, neither does using all its lib files cos some apps would work and others won't... Not sure why... Its gets play service errors...
PAC not getting enough votes
Cwm recovery is good u know....and installing PAC milestone alone or with gapp still work good....
And I have tried it without the first or original PAC ROM on my tab p6810. Well, there are simple build prop tweaks u can use and changed DRM app, cell broadcast receiver, VPN log, WPA sth....don't remember....in system app folder with sth from github for jb 4.2.2....
Well, I don't see why PAC won't have a lollipop version...think about iiiiit....a fully featured lollipop with pac 's natural performance scheme.....
O well, voter's choices....can't do anything about it...lol
Q&A for [ROM][5.0.2][Bacon] UBERCM12 UNOFFICAL [UBER-TC 4.8/4.9][CM12]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][Bacon] UBERCM12 UNOFFICAL [UBER-TC 4.8/4.9][CM12]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks man! It runs amazing
Can you cherry pick the 4 Tiles per row like in Temasek?
Bless
Anyone get a bootloop?
Wiped, flashed ROM, rebooted, flashed gapps and stuck in bootloop. Coming from SlimSaber latest.
cm12.1 uber
100% working rom. I'm very happy with this ROM, as for the mms problem I'm using textra which works perfectly like the MMS in cm12 nightly ROM
Keep up the good work! Please!
Thanks
---------- Post added at 11:07 AM ---------- Previous post was at 11:01 AM ----------
No bootloop.
WiFi working and good operator 2, 3G and lte
Sound goog and using AudioFx cm12 improved sound boost a lot
Using textra for MMS and sms. As good an the MMS cm12 nightly
)))))
random pin code problem
Hello
I use your latest build (20150327-smoki3-bacon) as second rom. ak1.137, ukm v3.8.1.2, gapps-L3-17-15
Activated "Scramble layout" for pin cause permanent and infinite system-ui crashes.
Cool
Thanks for this ROM
This ROM is blazing fast! Thanks so much. This is going to be my first android 5.1 ROM.
Lollipop Modem
When coming over from kit kat do I have to flash the latest lollipop modem?
CodzKilla415 said:
When coming over from kit kat do I have to flash the latest lollipop modem?
Click to expand...
Click to collapse
You can flash the latest cm12 nightly. This will install the new modem and other parts of the new firmware.
Does anyone have the problem of WiFi dropping out intermittently on this ROM, or any other Android 5.1 ROM for that matter? Sometimes it struggles to reconnect also.
Unofficial and official
So I see that smoki3 makes unofficial roms such as euphoria and cm12.1. I just have a question. Are smoki3 's roms dort of a beta version of the official ones and which one would be better to chose.
Sincerely