Database Info

[Completed] [Q] [d2att] No ROM booting up

So, I bought this at&t Galaxy S3 with leaked UCUEMJ2 (I assume) then I tried factory resetting it. It didn't boot up after the at&t logo. I tried flashing stock 4.1.1 which was risky but odin failed in it. I also tried reflashing UCUEMJ2 and Cyanogenmod, both stucked on the starting logo. Downloading mode shows something like Warranty bit:1 with red letters which is related to knox, I suppose. Please help, I just want my phone to work no matter which rom.

Hi there,
All you need you will find in this thread:
[HOW-TO] The All-In-One Backup/Root/Flash Guide & Bootloader Support - [I747 & I747M]
[HOW TO GUIDE] How To Unbrick AT&T I747 and I747M After 4.3 OTA
For other questions please refer to this forum: AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

[Completed] VZW Note 2 Bricked - Fix it, or replace it? (Suggestions)

I bricked my Galaxy Note 2 trying to root it. It was at version 4.1.2, and I was using CASUAL. It's now stuck trying to boot up the "Samsung Galaxy Note 2" screen just repeating over and over again. I tried flashing it with Odin, and it fails to write to NAND during boot.img. So, I'm wondering what my play is at this point.
I'm flashing to stock 4.1.2 with Odin 3.07. I've tried different USB cables, different ports, different versions of Odin. I've tried it with the battery in, with the battery out. I've tried accessing recovery mode (I can't). I've tried restarting my computer, updating Samsung Drivers, installing Kies, and just about every other suggested troubleshooting tip I could find, with no success. So, I'm pretty sure it's a paperweight now.
I can upgrade my phone and get something new, but with all the talk of locked boot loaders, and bounties for root, I'm not sure what I'd even get. I was considering an HTC M8 since they're free w/ 2 yr right now, but if I can't mess with custom roms down the line, or won't be able to root it, I feel like I'm back to being stuck on iOS. So, can somebody suggest a good upgrade to the Note 2 that won't be a total pain to mod? Or, even better, a fix for a bricked SCH-i605 Galaxy Note 2 on Verizon that can't enter recovery mode, or successfully flash with Odin?
Thanks.

Hi there,
Here is what you must to read/follow:
Questions about Unlocking or Recovering from a Soft Brick? LOOK HERE BEFORE POSTING!!
[Q] Soft Bricked VZW Note 2
[GUIDE][VZW Edition]How to Root/Rom/Return to Stock the VZW Galaxy Note II!
For any other questions please register an account on XDA and ask directly in that threads or in this forum:
Verizon Galaxy Note II Q&A, Help & Troubleshooting
Good luck

[Completed] [Q] After boot and samsung logo black screen. S3 SGH-I747M Kodoo Canada

I'm out of Ideas, please help me.
Here is my info:
Samsung galaxy s3 sgh-i747m from kodoo Canada. I had installed cyanogenmod through their installer over a year ago. I have been using it with my rogers sim with no problems. Less than 2 weeks ago my screen randomly goes black. I try pulling the battery. The samsung logo appears but then back to black but I can hear everything is working. I Try and boot into recovery and everything is black. I boot into download mode and everything looks fine. I try reinstalling cyanogenmod and then Samsung stock through kies and smart switch and every stock kodoo file I can find .
There is one of two things that happen.
If I install a stock below 4.4.2 I get fail in Odin 3.07 and this on download mode:
Odin Mode
Product Name: SGH-I747M
Current Binary: Samsung Official
System Status: Official
Qualcomm secureboot: Enable
Warranty Bit: 1
Bootloader AP SWREV: 2
SW REV Check Fail : Fused 2 Binary 1
If I install a stock rom with 4.4.2 or install from Smart Switch
Everything proceeds perfectly but upon reset I see the samsung logo and then nothing just a black screen with the chime in the background. Still can't boot into recovery. I only see the recovery in blue in the upper left corner but then nothing.
I would greatly appreciate any help you can give me.

Hi there,
All you need is here:
[STICKY INDEX] AT&T GS III - I747 {/Root/ROMsTools}
[HOW TO GUIDE] How To Unbrick AT&T I747 and I747M After 4.3 OTA
For questions please use this forum: AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

Thanks for the reply R_a_z_v_a_n.
The [HOW TO GUIDE] How To Unbrick AT&T I747 and I747M After 4.3 OTA states from the beggining: thus far this method will not work for any of your 4.4.2 ota bricks if you flashed the 4.4.2 modem on the mjb bootloader, the only way to fix those bricks is with a new emmc, motherboard or a new phone. Jtag won't save you this time the phone is now a glorious paperweight.
I believe I'm on 4.4.2. because those are the only roms I am able to successfully install but then of course the screen goes black. So if that is the case, does it mean my phone is done? just a paperweight as the article says?
I'm wondering if I should try anyways or is there a sure way to get my phone running from 4.4.2.?
Thanks for the help, look forward to your answer.

sparaminpied said:
I'm wondering if I should try anyways or is there a sure way to get my phone running from 4.4.2.?
Click to expand...
Click to collapse
Hi again,
You'd be best served asking for help from the experts who own your device in the thread for Q&A I gave you link above, see bellow posted again:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Have a good day

[Completed] Bricked Samsung Galaxy S6, Any help appreciated!

So I bought a new S6 SM-G920I. I rooted it just fine with odin, then i tried flashing twrp using odin which failed.
So I got a message saying: recovery is not senaroid enforcing. Then I read that you need to flash stock rom, I think I flashed the wrong one so my S6 says: An error has occurred while updating the device software. Use the emergency recovery option in Smart Switch PC software.
Now im stuck and don't know what to do. I went to sam mobile to download right firmware, but there are too many countries to choose, and they dont have USA as an optoin so...
Any help is appreciated

Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
[[FAQ][HELP THREAD][GUIDES LIST] Ask Any Question for S6
Good luck!

[Completed] Samsung S6 Edge Plus G928F can't flash ERR BIANRAY:0 err

hi
i have samsung g928f edge phone, phone get flashed successfully to latest version 6.0.1 but after giving DRK err, when try to root with kernel or any other root file frp doens't let it to get flashed the file phone only go to download and recovery mode tried also downgrading to 5.1 but due to frp lock i am unable to flash the phone did lots of tires to remove frp with different tool but no luck phone is usless now for me can't flash can't root how to get rid of this problem ? updated to 6.0.1 with odin smart switch but same drk problem comes up
help would be really appreciated

XDA Visitor said:
hi
i have samsung g928f edge phone, phone get flashed successfully to latest version 6.0.1 but after giving DRK err, when try to root with kernel or any other root file frp doens't let it to get flashed the file phone only go to download and recovery mode tried also downgrading to 5.1 but due to frp lock i am unable to flash the phone did lots of tires to remove frp with different tool but no luck phone is usless now for me can't flash can't root how to get rid of this problem ? updated to 6.0.1 with odin smart switch but same drk problem comes up
help would be really appreciated
Click to expand...
Click to collapse
Hi and welcome to XDA.
Your device has a dedicated forum here:
> Samsung Galaxy S6 Edge+ > Galaxy S6 Edge+ Q&A, Help & Troubleshooting
All questions regarding your device belong in the forum linked above. You'll need to create an account first so you can post in the main forums.
Good luck