*** DON'T FLASH THIS IF YOU ARE NOT COMFORTABLE WITH DATA LOSS, INSTABILITY, RABID DOGS EATING YOUR CAT, OR SPACE ALIENS STARING AT YOU IN THE MIDDLE OF THE NIGHT! ***
*** If you like this post and can't donate to the cause, then hit thanks! ***
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Credits:
Steve Kondik and the amazing CM team
See here for more contributors
And the many testers and contributors not listed above, including: chrmhoffmann, thunderger, jaybob413, Everett Coleman, Pretoriano80, untermensch, Richard Huynh and others I probably forgot
*** This is a development thread.
For questions and troubleshooting refer to this thread ***
*** Backup your data before continuing! ***
What works:
Audio
Hardware Acceleration
WiFi
GPS
Bluetooth
Touchscreen
HDMI
Microphone
USB host
Dock
Cameras
Encryption
Accelerometer
Gyroscope
Compass
Known issues:
Performance quicksetting tile isn't implemented yet (but is available through sys.cpu.mode property)
Dock battery indicator tile isn't implemented yet (but hardware works)
cm-recovery doesn't work (even boots)
lock key button in keyboard doesn't wake up the device
Netflix has issues after pausing, rewinding or fast forwarding. (libomxplayer.so) It's an ASUS issue at this point. (FIXED? Please confirm, I'm not seeing these issues anymore)
Screenrecording is broken, codecs issue (OMX doesn't support virtual displays, we only have 4.2 blobs, will not be fixed, unless Asus releases KitKat for our devices)
You tell us...
*** Backup your data before continuing! ***
Instructions (README, A LOT!!!!!!):
Make sure your device is unlocked. Grab the unlock utility here, under Others -> Utilities
(If you're on stock 4.2.x, skip this step) Install the 10.6.1.14.4 or greater bootloader for your variant, see here for more information.
Download Clockwork Recovery 6.5.0.1 here
Download GAPPS
Place the cm-12-YYYYMMDD-EXPERIMENTAL-JRUESGA-tf700t.zip (you can grab it from downloads section) and gapps-lp-YYYYMMDD-signed.zip (search in internet for a valid package) on your sdcard of your slate
Reboot to the bootloader: Power off slate, then: Power + Volume -. Hit Volume - until you hit the USB symbol, then hit Volume +.
Flash Clockwork Recovery
^^ BACKUP YOUR DATA!
Next, Wipe Data Factory Reset (ONLY NECESSARY IF COMING FROM ASUS stock ROM or something other than CM11.0!!!)
Then 'install zip from sdcard', 'choose zip from internal sdcard', then install the cm-12-YYYYMMDD-NIGHTLY-tf700t.zip.
Then install gapps-lp-YYYYMMDD-signed.zip.
Go back to the main menu and Reboot Now.
Upgrading builds:
Reboot to recovery
Install cm-12-YYYYMMDD-EXPERIMENTAL-JRUESGA-tf700t.zip
Reboot
or use built in cmupdater
If you run into issues outside the 'Known issues', please post a logcat.
You will need the adb binary on your computer (Windows, Mac or Linux):
Code:
adb logcat > logcat.txt
If are get a hard lock and have to reset, please pull the /proc/last_kmsg and post it after you are booted again.
Code:
adb pull /proc/last_kmsg
Please do not report on ANY known issues!!!
Help? Click here...
Donate to the devs:
dasunsrule32 - (Google Wallet - [email protected] or PayPal)
jruesga
Source(s), Gerrit and Changelog:
Source(s):
https://github.com/CyanogenMod/android_device_asus_tf700t/tree/cm-12.0
https://github.com/CyanogenMod/android_kernel_asus_tf700t/tree/cm-12.0
Gerrit ( Submitting patches/fixes ):
http://wiki.cyanogenmod.org/w/Doc:_using_gerrit ( When submitting a patch, please use this group vs adding myself and individual devs: Transformer Team )
Changelog:
http://www.cmxlog.com/12/tf700t/
XDA:DevDB Information
CyanogenMod TF700T CM-12.0, ROM for the Asus Transformer TF700
Contributors
jruesga, dasunsrule32
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: Bootloader 10.6.1.14.4 or above
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-19
Last Updated 2015-01-28
Reserved
Reserved
cm-12-20150118-EXPERIMENTAL-JRUESGA-tf700t.zip
This is the first experimental image for TF700T CM12.0 (Lollipop) cm-12-20150118-EXPERIMENTAL-JRUESGA-tf700t.zip.
Please, be sure you backup your data before flash it. This are the MUST HAVE requirements (Downloads):
* 10.6.1.14.4 or greater bootloader
* Clockwork Recovery 6.5.0.1 (I didn't test TWRP)
* GAPPS 5.0 (Lollipop) - Search in internet for the proper ones
This is an experimental versión, so expect things not working.
Will test with TWRP 2.8.0.1.
Installed it successfully (dirty flashed over CM11)! No FC 'til now. Thank you for your hard work! :good:
Process.com.google.process.gapps has stopped error.
I use basketbuild gapps everything ran well before I installed gapps.
dracinn said:
Process.com.google.process.gapps has stopped error.
I use basketbuild gapps everything ran well before I installed gapps.
Click to expand...
Click to collapse
Please, try to post a logcat when reporting an error
Code:
adb logcat > logcat.txt
I'm using 20141109 from http://d-h.st/users/dhacker29/?fld_id=27426
jruesga said:
Please, try to post a logcat when reporting an error
Code:
adb logcat > logcat.txt
I'm using 20141109 from http://d-h.st/users/dhacker29/?fld_id=27426
Click to expand...
Click to collapse
My logcat.
dracinn said:
My logcat.
Click to expand...
Click to collapse
The basketbuild gapps are 20141109 (5.0) but the current version of android is 5.0.2 and the GoogleContactsSyncAdapter is crashing because doesn't find a resource. Try to upgradte to the latest published version of the dhackers99 gapps (http://d-h.st/users/dhacker29/?fld_id=27426)
jruesga said:
The basketbuild gapps are 20141109 (5.0) but the current version of android is 5.0.2 and the GoogleContactsSyncAdapter is crashing because doesn't find a resource. Try to upgradte to the latest published version of the dhackers99 gapps (http://d-h.st/users/dhacker29/?fld_id=27426)
Click to expand...
Click to collapse
Appears to be the same problem as far as I can tell. Will try clean install.
Lollipop using data=F2FS
Does anyone know if this can be used if data is formatted to F2FS?
Also does the kernel support it?
norm883 said:
Does anyone know if this can be used if data is formatted to F2FS?
Also does the kernel support it?
Click to expand...
Click to collapse
Not yet. I will consider to add it to in my TODO list.
F2FS
jruesga said:
Not yet. I will consider to add it to in my TODO list.
Click to expand...
Click to collapse
Thank you sounds great!
I use this version as my daily driver. The only big thing that i miss is the not working auto rotation. When can we expect a new (experimental) firmware?
Thank you!
My Public said:
I use this version as my daily driver. The only big thing that i miss is the not working auto rotation. When can we expect a new (experimental) firmware?
Thank you!
Click to expand...
Click to collapse
We have a fix for the rotation problem. I will leak a new flashable zip this weekend with some other fixes
Wrong thread... Sorry' 'bout that.
Added on edit:
FYI, the Q&A / Troubleshooting links to the CM11 thread rather than the CM12 specific thread.
This is the correct link:
http://forum.xda-developers.com/transformer-tf700/help/tf700t-cyanogenmod-12-t3006630
John Kotches said:
Wrong thread... Sorry' 'bout that.
Added on edit:
FYI, the Q&A / Troubleshooting links to the CM11 thread rather than the CM12 specific thread.
This is the correct link:
http://forum.xda-developers.com/transformer-tf700/help/tf700t-cyanogenmod-12-t3006630
Click to expand...
Click to collapse
I updated the link to Q&A thread. Thx
I find this helps a lot with the chrome problem. Try this !
http://www.techrepublic.com/article/pro-tip-speed-up-chrome-on-android-with-this-handy-hack/
cm-12-20150126-EXPERIMENTAL-JRUESGA-tf700t.zip
New experimental version is up in the downloads section http://forum.xda-developers.com/devdb/project/dl/?id=10822
Changelog:
* Fix auto-rotation
* Update wifi/bluetooth rfkill driver to bcm4330
* Added bluesleep support
* Updated media codecs (should improve netflix playback)
* Updated selinux policies
* Removed camera wrapper and forced camera api 1 (this should prevent errors with third party camera apps)
* Set "High Performance" mode during boot
* CyanogenMod CM12 2015-01-16 upstream changes
Thx to chrmhoffmann and lj50036 for some of this patches
Please, read the OP before flash it if you came from other rom or cm11.
Related
*** DON'T FLASH THIS IF YOU ARE NOT COMFORTABLE WITH DATA LOSS, INSTABILITY, RABID DOGS EATING YOUR CAT, OR SPACE ALIENS STARING AT YOU IN THE MIDDLE OF THE NIGHT! ***
*** If you like this post and can't donate to the cause, then hit thanks! ***
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Credits:
Steve Kondik and the amazing CM team
See here for more contributors
And the many testers and contributors not listed above, including: thunderger, jaybob413, Everett Coleman, Pretoriano80, untermensch, Jorge Ruesga, Richard Huynh and others I probably forgot
*** Backup your data before continuing! ***
What works:
Audio
Hardware Acceleration
WiFi
GPS
Bluetooth
Accelerometer
Gyroscope
Compass
Touchscreen
HDMI
Microphone
USB host
Dock
Cameras
Encryption
Known issues:
Netflix has issues after pausing, rewinding or fast forwarding. (libomxplayer.so) It's an ASUS issue at this point. (FIXED? Please confirm, I'm not seeing these issues anymore)
screenrecord is broken, codecs issue (OMX doesn't support virtual displays, we only have 4.2 blobs, will not be fixed, unless Asus releases KitKat for our devices)
You tell us...
*** Backup your data before continuing! ***
Instructions (README, A LOT!!!!!!):
Make sure your device is unlocked. Grab the unlock utility here, under Others -> Utilities
(If you're on stock 4.2.x, skip this step) Install the 10.6.1.14.4 or greater bootloader for your variant, see here for more information.
Download Clockwork Recovery (TWRP has issues with KitKat, be forewarned): Standard | Touch
Download CM11.0
Download GAPPS
Place the cm-11-YYYYMMDD-NIGHTLY-tf700t.zip and gapps-kk-YYYYMMDD-signed.zip on your sdcard of your slate
Reboot to the bootloader: Power off slate, then: Power + Volume -. Hit Volume - until you hit the USB symbol, then hit Volume +.
Flash Clockwork Recovery instructions: Standard | Touch
^^ BACKUP YOUR DATA!
Next, Wipe Data Factory Reset (ONLY NECESSARY IF COMING FROM ASUS stock ROM or something other than CM10.2!!!)
Then 'install zip from sdcard', 'choose zip from internal sdcard', then install the cm-11-YYYYMMDD-NIGHTLY-tf700t.zip.
Then install gapps-kk-YYYYMMDD-signed.zip.
Go back to the main menu and Reboot Now.
Upgrading builds:
Reboot to recovery
Install cm-11-YYYYMMDD-NIGHTLY-tf700t.zip
Reboot
or use built in cmupdater
If you run into issues outside the 'Known issues', please post a logcat.
You will need the adb binary on your computer (Windows, Mac or Linux):
Code:
adb logcat > logcat.txt
If are get a hard lock and have to reset, please pull the /proc/last_kmsg and post it after you are booted again.
Code:
adb pull /proc/last_kmsg
Please do not report on ANY known issues!!!
Help? Click here...
Donate to the devs:
dasunsrule32 - (Google Wallet - [email protected] or PayPal)
jruesga
Source(s), Gerrit and Changelog:
Source(s):
https://github.com/CyanogenMod/android_device_asus_tf700t/tree/cm-11.0
https://github.com/CyanogenMod/android_kernel_asus_tf700t/tree/cm-11.0
Gerrit ( Submitting patches/fixes ):
http://wiki.cyanogenmod.org/w/Doc:_using_gerrit ( When submitting a patch, please use this group vs adding myself and individual devs: Transformer Team )
Changelog:
http://www.cmxlog.com/11/tf700t/
XDA:DevDB Information
CyanogenMod, ROM for the Asus Transformer TF700
Contributors
dasunsrule32, jruesga
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Bootloader 10.6.1.14.4 or above
Based On: CyanogenMod
Version Information
Status: Beta
Current Stable Version: 11.0-M9
Created 2013-10-01
Last Updated 2014-08-13
Reserved
Reserved
Reserved...
Double Reserved....
Ok guys, the new nightlies should be starting tonight. So keep an eye out. Thanks for all the support!!!
Please try to keep this thread clean, I want as much relevant information in it as possible. Please use the Thanks and Donate button(s)/links to say Thank you!!!!
Still a slight bit of lag on the home screen in portrait mode, logcat shows nothing interesting.
Something of interest is while I was flipping between screens, I got a hard lock and reboot, but I wasn't able to pull last_kmesg before it rebooted by itself.
Looking great though!
Updates through the CM updater do not work?
dasunsrule32 said:
Upgrade to stock ASUS Jellybean, see here. Flash the WHOLE ROM, not just the BOOTLOADER. This is especially important if you don't have access to your nvflash blobs...
Click to expand...
Click to collapse
what if youre already on unofficial 10/18? cant just flash over?
The Jack of Clubs said:
what if youre already on unofficial 10/18? cant just flash over?
Click to expand...
Click to collapse
Yes, but it will be best to do a factory restore before flashing, wich means your apps will be also wiped.
Why two threads???? One is enough i think.
The Jack of Clubs said:
what if youre already on unofficial 10/18? cant just flash over?
Click to expand...
Click to collapse
You need to wipe clean coming from any rom.
dasunsrule32 said:
You need to wipe clean coming from any rom.
Click to expand...
Click to collapse
Not really. Dont wipe, unless you start getting FCs is what most people follow
Had to wipe clean but everything works really nice now.
Thank you!
hiemanshu said:
Not really. Dont wipe, unless you start getting FCs is what most people follow
Click to expand...
Click to collapse
I want them to wipe clean. I don't want issues and reports cropping up from issues from other ROM's.
playback of a x264 hd movie with dts audio results in a fc after about 60 minutes. log file is sent to dasunsrule.
bt protocols, e.g.handsfree, avrcp, are missing.
plugin notifications,e.g. hdmi, don't work. see audio log.
audio output is not loud enough.
audio brightness is bad.
@dasundrule
please copy logcat instructions at device from the other thread so that people can create and send immediately logs.
there is still a lot to do.
While trying to build I got this error. Can anyone help? Thanks!
scripts/kconfig/conf --silentoldconfig Kconfig
host C++: aapt <= frameworks/base/tools/aapt/Command.cpp
host C++: aapt <= frameworks/base/tools/aapt/CrunchCache.cpp
host C++: aapt <= frameworks/base/tools/aapt/FileFinder.cpp
host C++: aapt <= frameworks/base/tools/aapt/Main.cpp
drivers/misc/inv_mpu6050/Kconfig:22:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:31:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:40:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:56:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:60:warning: choice value used outside its choice group
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Cross-compiler tool prefix (CROSS_COMPILE) []
Local version - append to kernel release (LOCALVERSION) [-cyanogenmod] -cyanogenmod
Automatically append version information to the version string (LOCALVERSION_AUTO) [Y/n/?] y
Kernel compression mode
> 1. Gzip (KERNEL_GZIP)
2. LZMA (KERNEL_LZMA)
3. LZO (KERNEL_LZO)
choice[1-3?]: 1
Default hostname (DEFAULT_HOSTNAME) [(none)] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
make[4]: *** [silentoldconfig] Error 1
make[3]: *** [silentoldconfig] Error 2
make[2]: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop.
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/jeremy/android/system/kernel/asus/tf700t'
make: *** [TARGET_KERNEL_BINARIES] Error 2
make: *** Waiting for unfinished jobs....
[email protected]:~/android/system$
It couldn't mount either of my SDXC cards. Not the Micro 64Gb in the tablet or the 128Gb in the dock. Both are formatted with fat32. It may have corrupted the 64Gb card as well. I'm not sure if Clockwork did it or if CM did it. Clockwork couldn't mount it either during the attempt to back up my current ROM and that may be when it was corrupted. Actually, I don't think it even saw that there was a card in the dock at all.
I'm having some ADB issues. When I try to run ADB from my Linux computer I get "no permissions", I see that the
ROM has got several settings for ADB and I've tried to play around with it but no fix so far. Any suggestions?
fordwolden said:
I'm having some ADB issues. When I try to run ADB from my Linux computer I get "no permissions", I see that the
ROM has got several settings for ADB and I've tried to play around with it but no fix so far. Any suggestions?
Click to expand...
Click to collapse
Try running it as super user.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
U8160/80 27072013 Final
U8150 01052013
Mirror U8160/80 02032013
Mirror U8150 02032013
U8150 Melfas Touch Fix
Google Apps alias GAPPS:
07052013
Mirror 07052013
Old Versions
ROMS:
U8160/80 01052013
U8160/80 23072013
Latest Speed Build:
U8120/10/00
U8350
Latest Complete Build (Old 25012013) [DISCONTINUED]:
U8160/80
U8150
U8120/10/00
HotFix (only for 02032013)
U8150 02032013
GAPPS 12012013
U8160/80 Perf 02032013
U8150 Speed 02032013
U8160/80 Speed 02032013
U8160/80 Speed 25012013
U8150 Speed 25012013
U8120/10/00 Speed 25012013
U8120/10/00 12012013
U8160/80 19012013
U8150 24122012
U8160/80 12012013
U8160/80 06122012
U8120/10/00 07122012
Mirror Folder
Keyboard and S2E Patch U81xx
Google Apps:
06122012
Installation
- First time flashing CM9 to your Device (or coming from another ROM)?
Root Your Device and install ClockWorkMod Recovery/Amon_RA Recovery
Reboot into recovery using Volume-Up + Power
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from CM7/CM9?
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from another CM9 Build? (Wipe Required if upgrading from older release than 23072013)
Do a Nandroid Backup! (Optional)
Wipe Cache and Dalvik-Cache
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
Note: Is always Recommended to do WIPE, or you can have problems (not always).
Reporting Bugs
You are allowed to report bugs only at the u81xxcm91 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat (adb logcat -d > logcat.txt) right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Model:
ROM version:
ROM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup or other backup app:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Attach a Logcat of the issue in plain text.
What steps will reproduce the problem?
1.
2.
3.
Failure to fill out the above template or attach a log will result in this
issue being closed immediately
Changelog
Changelog is available here
Recoveries (tested and working for all devices, U8160_80 are my builds)
For RZ Recovery Features see here
Source (to be completed)
People who made this possible:
Alberto96
LeoDeos (Alberto96's Recognized Themer )
psyke83 (Thanks for Kernel, Binaries, Source, Time Spent and much more)
tilal6991 and aorth for U8150 Stuff and much more (sorry for delay)
slymobi and joilaroi for U8120/10/00 Stuff and much more (sorry for delay)
AC1953 (Thanks for fantastic audio drivers, ideas and much more)
CyanogenMod Team
Others
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Alberto96 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Latest Version: In Upload
Google Apps: In Upload
Installation
- First time flashing CM9 to your Huawei U81xx Device (or coming from another ROM)?
Root Your Device and install ClockWorkMod Recovery/Amon_RA Recovery
Reboot into recovery using Volume-Up + Power
Do a Nandroid Backup! (Opional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from CM7/CM9?
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from another CM9 Build?
Do a Nandroid Backup! (Optional)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
Note: Is always Recommended to do WIPE, or you can have problems (not always).
Alberto96's Mods
JB Style (till full working CM10 build is out)
Tweaked to the max
LDPI Resized
OTA Updater Included
Naked Browser Included (for smooth web browsing)
No-Frills CPU Control Included
Notes and StopWatch Included (essentials app that in CM9 are not included)
Modded QuickPic instead of Froyo Limited Gallery
Slimmed
Reporting Bugs
You are allowed to report bugs only at the u81xxcm91 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Model:
ROM version:
ROM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup or other backup app:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Attach a Logcat of the issue in plain text.
What steps will reproduce the problem?
1.
2.
3.
Failure to fill out the above template or attach a log will result in this
issue being closed immediately
Changelog
Changelog is available here
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Click to expand...
Click to collapse
Haha nice, was waiting for this....
Waiting for download...
Nice job waiting for upload!
Sent from my Vodafone 858 using xda premium
Waiting for today afternoon install new rom
ready for test on 8110 but still link in upload )
Only U8160/80 version is ready, U8150 and U8120/10/00 needs work and testing.
I'm uploading rom now as i had some problems.
Inviato dal mio GT-I9000 con Tapatalk 2
U8160/80 ROM is UP Light, very light gapps WIP
Where is the gapps link?
Sent from my Vodafone 858 using xda premium
Thanks
nice !:good: i can do testing for u8150 for cm9.1.
polac said:
Where is the gapps link?
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
Is WIP, near finished
mitulvohra said:
nice !:good: i can do testing for u8150 for cm9.1.
Click to expand...
Click to collapse
Ok, i will contact you via PM
GAPPS Package is uploaded. Enjoy
...
When 8150 version will be ready for testing?
Thanks.
When i finish it and my tester gives me positive result.
Nice Job
Very smooth, better than other cm9.1 roms. (usb mass storage isnt working )
Check PC, usb mass storage is full working, i ultra tested it xD
Alberto,
I appreciate you putting me in the credits, but your first post is still misleading, as it suggests that you have built this ROM from source. In fact, you are not building from source - it is a binary modification of my most recent CM9 build (which I really have built from source).
Another (small, but annoying) thing you have done is changed the authorship of scripts that are clearly not your own. For example, your "02HuaweiProps" script says "by Alberto96", but in fact it is an unmodified version of my "02setuphardware" script, which you can see here: https://github.com/CyanogenMod/andr...ngerbread/prebuilt/etc/init.d/02setuphardware. It is generally not good behaviour to try and pass off other people's work as your own.
Yes is true, i changed it (script) as before i mod it adding some changes (for u8180 touch and differences in camera), but i changed them differently and i leave my credits in scripts. Sorry, i will fix it in next version. I will add also this alert in first post. Thanks for the alert
UPDATE: Fixed for Future Release
U8120/10/00 Version almost ready, only need testing on bluetooth and is ok All is new now, audio module, graphic initializer,.... all! Works smooth and without problems. Link will appear on thread when rom test is succesfully. U8150 rom needs still to be tested.
Alberto96 said:
U8120/10/00 Version almost ready, only need testing on bluetooth and is ok All is new now, audio module, graphic initializer,.... all! Works smooth and without problems. Link will appear on thread when rom test is succesfully. U8150 rom needs still to be tested.
Click to expand...
Click to collapse
general impressions are good for U8110
- sound is a little weaker but can survive
- wifi, bluetooth, camera works
the biggest problem is the calibration screen,the corners and the top and bottom of the screen is very difficult
thanks for your hard work for us
[DEVELOPMENT] - CM12.1 - Android 5.1 - FreeXperia Project
CyanogenMod is a free, community built distribution of Android 5.1 which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
[DEVELOPMENT] - CM12.1 - Android 5.1 - FreeXperia Project, ROM for the Sony Xperia Z3 Compact
Contributors
jerpelea
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2014-12-02
Last Updated 2015-04-13
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
Homepage
www.freexperiaproject.net
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
the build should be here soon: http://fxpblog.co/cyanogenmod/cyanogenmod-12/
we have enabled daily builds
if your device is not yet in the list will appear soon (1 day,1 week, 1 month) no ETA please
but you have to remember that is an early alpha build
Thread closed until there is a build available
Thread cleaned
@jerpelea, please PM a mod or report this post to get the thread re-opened immediately.
Now that the daily builds are continued, have you or any other dev worked on CM12 for our device?
I am currently able to compile, but there seems to be a couple of issues that users are reporting,
Problems with com.qualcomm.location.apk
Updater script errors in recognizing proper device
System bootloops after 'starting apps'
Code:
E/installd( 269): DexInv: --- END '/system/priv-app/com.qualcomm.location/com.qualcomm.location.apk' --- status=0x0100, process failed
D/AndroidRuntime( 4634): Shutting down VM
E/AndroidRuntime( 4634): *** FATAL EXCEPTION IN SYSTEM PROCESS: main
It might be that I am not importing all the necessary repositories or the wrong ones (in my local manifests),
I would be grateful if device specific repos can be mentioned in the OP or second post
Thank you
Merry Christmas!
Can't wait for my Z3C build to be available.
AlexBurnout77 said:
Can't wait for my Z3C build to be available.
Click to expand...
Click to collapse
On that topic -- why has this been re-opened if there are still no builds?
@jerpelea can we get at least a vague explanation of what's halting the builds from being made/uploaded?
Exactly. If they wanted to give us a full working built they can. I dont understand why theyre dragging thier boots, unless they want to release lollipop stock first.
someone755 said:
On that topic -- why has this been re-opened if there are still no builds?
@jerpelea can we get at least a vague explanation of what's halting the builds from being made/uploaded?
Click to expand...
Click to collapse
g0ldenchild562 said:
Exactly. If they wanted to give us a full working built they can. I dont understand why theyre dragging thier boots, unless they want to release lollipop stock first.
Click to expand...
Click to collapse
The builds weren't being uploaded because the build server was down for a couple of weeks. Now that it's back up things should be getting back to normal.
They can't give us a full working build because the builds aren't fully working. Even with Sony sources and binaries the modem still isn't working, CM12 isn't fairing much better.
Gairtial said:
The builds weren't being uploaded because the build server was down for a couple of weeks. Now that it's back up things should be getting back to normal.
They can't give us a full working build because the builds aren't fully working. Even with Sony sources and binaries the modem still isn't working, CM12 isn't fairing much better.
Click to expand...
Click to collapse
Well then the thread sbouldnt have been reopened. If theres nk available builds yet...
Yeah I'm not sure why they reopened it when they're not doing CM12 builds.
Did anyone flashed first release? What's working and not working.
Using the build from the 28th
Confirmed not working & issues:
*cell service
*camera
*Brightness slider is finicky
*device gets VERY hot
*massive battery drain
Things that work on this CM rom but not the latest AOSP build:
*NFC
*sd Card Support
*USB mounting to a PC
* Location
Notes:
This installs the stock CM recovery so make sure to get rom and gapps installed via TWRP the first go.
I had to edit the updater-script to flash. Removed the first line of device checks as it saw mine as a aries and would not flash
PS, for the love of all things holy, please setup a mirror. The current provider is just shy of torture.
finally we get one build,will flash.wait for my report
edit:lol,saw it,plan is over
edit2:still flashed it,it seems we have baseband at least(not display unknown),on its first boot,i noticed it's searching signal,then disappeared,checked baseband not unknown,tried to search for carrier but it never ends.
did a logcat,before logcat I turned on airplane mode,after its beginning i disabled airplane mode,tried to search for operator,then turned it to lte mode then tried to search again.
https://www.dropbox.com/s/nfexgudos3bni87/1.txt?dl=0
I don't understand why two built on 28 december ? One 280Mo and an other 285Mo .
http://uploaded.net/f/4bbo69
You can see to the bottom one this page .
Thanks i'm very happy to see CM12 on this device
mick711 said:
I don't understand why two built on 28 december ? One 280Mo and an other 285Mo .
http://uploaded.net/f/4bbo69
You can see to the bottom one this page .
Thanks i'm very happy to see CM12 on this device
Click to expand...
Click to collapse
the other one is for z3.I think I didn't see more builds..
Just tried the latest renamed nightly for (z3c instead of aries)-
FXP-cm-12-20141228-UNOFFICIAL-z3c.zip
The WIFI radio seems to work - but the LTE and voice radio connects
right at boot and then disconnects and goes away.
On shutdown/restart the same thing happens - LTE/Voice connects at first
and then it goes away.
I saw funky radio issues when testing the pure AOSP aries builds-
so it may not be just the CM12 ROMS.
I also had to edit the z3c zip file to allow the aries product name
so I could install it from doomlord's stock CWM kernel recovery image-
but that was minor compared to the radio issues.
Hi All,
I've been working on a CAF version for osprey. This is started from kernel and device tree made by Alberto97 and Squid2, so thanks a lot to them for the bringup.
This version is very early and should only be flashed by people who know what they are doing. Flash this at your own risk.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For now only a few things are working:
Working
Bluetooth
SMS/RIL
Sound
Camera preview
Not work
Maybe dual sim
Binaries
Here
Sources
https://github.com/boulzordev/local_manifests/tree/caf-6.0
There is still an issue when building, you must first build the kernel before being able to make a full ROM
XDA:DevDB Information
CAF-6.0 [Osprey], ROM for the Moto G 2015
Contributors
scritch007, squid2, Alberto97
Source Code: git://codeaurora.org/platform/manifest.git
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: CAF
Version Information
Status: Testing
Created 2015-10-20
Last Updated 2016-01-05
Changelog
osprey-caf-87.zip
Updated to latest version of CM13 device specific + CM13 kernel)
Updated to LA.BR.1.2.7-00910-8x09.0.xml (February security patch)
Fixed the ringtone setting issue
Using frameworks_av from CM13 from now on.
osprey-caf-86.zip
Fix setting ringtone
Fix invalid number error when the call is ended by the other end
Sepolicy from cm imported (getting ready for Sepolicy being enabled)
osprey-caf-85.zip
Settings for light management ( When opening settings values reset to default)
Dual sims outgoing should be fine now
Updated frameworks_av with CM commits
Now building osprey/lux/surnia at the same time, this is why the version is 85
Rebased with newest version of LA.BR.1.2.7
Backup script when flashing in recovery. This works with open gapps. This means gapps are copied and restored when flashing
osprey-caf-0.25.zip
Updated to 6.0.1
Now using commonized msm8916 like cm13 will do
Using libshim from cm for the missing symbols
There is a bug the initial bootanimation doesn't seem to load. But it loads once rom is started and optimising applications.
aosp-caf-0.24.zip
Didn't have time to test it but this should include the following fixes. I might be off for a few days again, but I'll definitely keep on workin on this ROM.
The google webview
"Maybe the reboot option"
The time.sleep for the camera3 application that was posted somewhere in here (Or surnia's thread)
Let's hope exfat sdcard working too
aosp-caf-0.23.zip
Fixed boot. Kernel is now using squid2 repository directly. But had to use the osprey-stock_defconfig so that it boost.
aosp-caf-0.22.zip
Dual sim support (Couldn't test it since I don't have a dual sim Moto E 2015 phone, but on lux I can make some calls in dual sim)
Fix an issue with wifi bootloop after installing gapps (Can't really tell the trigger, but it's fixed )
I didn't have time to test this version on osprey nor surnia, so you can wait for me to test it or try it yourself and report any issue.
aosp-caf-0.21.zip
Rebased on LA.BR.1.26_rb1.3
OEM unlocked button is now correctly working
Broke video playing but restored it that's why number is much higher with so little changes
aosp-caf-0.16.zip
Video Recording
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
aosp-caf-0.14.zip
Actions (based on CMActions) + Added some actions from Victara phone
Added some commits for gapps package authentication, this should prevent a few errors but not fully working yet.
aosp-caf-0.12.zip
Sdcard mounting properly (didn't double check)
Sound working
Camera can now take pictures (recording not working)
aosp-caf-0.7.zip
Wlan
Sdcard
Init built from caf directly.
Updated APN so now Data is working.
aosp-caf-0.4.zip
Initial Version. Remember to flash the image-new-0.4.img (using fastboot) after flashing aosp-caf-0.4.zip
GG
Guys, you can try Gapps from: HERE
nice,
Do i need to boot or flash the "special" boot.img?
what is the fastboot command is it fastboot flash image-new-0.4.img?? help i just need the correct command because im not sure exactly what to type thanks..
fastboot flash boot image-new-0.4.img
i can confirm it boots and that's it..
but great work! hope you can fix the wifi soon!
thanks,
i have some screenshots to:
EDIT: lol my screenshots are on techdroider..
http://www.techdroider.com/2015/10/aosp-how-to-install-android-marshmallow-moto-g3-2015.html
madscientistdam said:
what is the fastboot command is it fastboot flash image-new-0.4.img?? help i just need the correct command because im not sure exactly what to type thanks..
Click to expand...
Click to collapse
I also did not understand ...... when the Rom will be fully functional will explain
This ROM isnt fully functional. If you want tot test this out flash the zip and then boot in to the bootloader and flash the boot img using 'fastboot flash boot #name of img#' than you can boot up. This ROM isnt for daily use.
Hey OP what is your github link?
What is the diference between caf and cm?
christopherrrg said:
Hey OP what is your github link?
Click to expand...
Click to collapse
https://github.com/boulzordev
squid2 said:
https://github.com/boulzordev
Click to expand...
Click to collapse
Wasn't sure if that was his, thanks!
Any updates yet?
is the any updates for this rom?
? guys..
No ETA.
if i'm not wrong, is see a cm-13 for osprey in the github of scritch.
can someone tell my about this or is it just nothing?
will squid2 kernel work on this rom?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Click to expand...
Click to collapse
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Downloads
Latest builds: https://www.mediafire.com/folder/cwzwh1c90stij/SM-G355HN
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
Installation
1. TWRP Recovery required:
http://forum.xda-developers.com/galaxy-core/development/samsung-galaxy-core-2-sm-g355h-m-t2998094
2. Copy ROM on your ExtSdCard
3. Reboot into Recovery using 3-button-combo (home + volume up + power)
4. Do a Nandroid backup!!!
5. WIPE (wipe data/factory reset/wipe cache partition/internal storage)
6. Install the ROM from extarnal SD card using TWRP Recovery
7. Install Root from here:
http://forum.xda-developers.com/galaxy-core/help/root-galaxy-core-2-t2966445
8. Optionally install the Google Addon
Known Issues
Please do not report bugs if it is already listen in the list of known issues
* Some CyanogenMod features a missing - please do not file bug reports for those.
* Cannot set value via custom brightness "Edit" menu
* No account selected for Backup (gapps problem?)
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
* Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
* If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
* If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved
Known issues of current build :
* GPS not working. Will be soon.
* root doesn't work trough developers options
* What you report.
This ROM wouldn't be possible without:
* CyanogenMod
* Samsung Open Source Center
@ngoquang2708
@doesntexits
@cleverior.ipul
Sorry if I forgot someone
XDA:DevDB Information
kanas3gnfcxx (SM-G355HN), ROM for the Samsung Galaxy Core
Contributors
Y300-0100
Source Code: https://github.com/Y300-0100?tab=repositories
ROM OS Version: 4.4.x KitKat
Version Information
Status: Alpha
Created 2016-04-13
Last Updated 2016-04-13
changelog
20160415
* Fixed low volume while using headphones and playing music
2016 04 23
* Fixed NFC (not all tags can be detected )
2016 04 27
* Fixed freeze phone when try to turn of developer options, add Torch thanks to @doesntexits
And when you recording videos first change setting's of audio codes in camera settings.
@Y300-0100
Great work
I got one Q: Did this phone support dual-SIM? I see only one signal there
Also, the correct device codename is kanas3gnfc, not the xx suffix. You can get the right codename in the rootdir folder
How to install in SM-G355M?
Amazing work, i have a noob question, how can i install in SM-G355M?
Thank u , n sorry for my bad english
doesntexits said:
@Y300-0100
Great work
I got one Q: Did this phone support dual-SIM? I see only one signal there
Also, the correct device codename is kanas3gnfc, not the xx suffix. You can get the right codename in the rootdir folder
Click to expand...
Click to collapse
No. HN is single sim model only and code name is kanas3gnfcxx from stock build prop and https://androiddevice.info/submission/29929/show
I realize that when I get asserts prop error with kanas3gnfc when I tried to install rom.
Marco123V said:
Amazing work, i have a noob question, how can i install in SM-G355M?
Thank u , n sorry for my bad english
Click to expand...
Click to collapse
later today when I upload it...
for testing because i don't have M
Y300-0100 said:
No. HN is single sim model only and code name is kanas3gnfcxx from stock build prop and https://androiddevice.info/submission/29929/show
I realize that when I get asserts prop error with kanas3gnfc when I tried to install rom.
Click to expand...
Click to collapse
That's the recovery's fault, since it only get the .name instead of .device
If you say so, the codename in cm is cm_kanas3gnfc than the xx suffix (just like the .name in stock). Also, you can add kanas3gnfcxx in TARGET_OTA_ASSERT_DEVICE flag, so no installation error is produced
Y300-0100 said:
7. Install Root from here:
Click to expand...
Click to collapse
No need for this, since userdebug builds already rooted
Vv
What about the SM-G355H ? will it work or no ?
update-script not working for variant M
Detele is assert for working
Not Working:
-MTP
-Disable Developer Option or Debugging caused bootlop
Joaquin Scala said:
update-script not working for variant M
Detele is assert for working
Not Working:
-MTP
-Disable Developer Option or Debugging caused bootlop
Click to expand...
Click to collapse
1. you are using twrp for kanas3gnfc
2. to fix mtp I need stock boot.img for H and M because of ramdisk files
3. that I don't know. Don't have that issue. if phone reboots when you disable or enable Developer Option or Debugging use grab /proc/last_kmsg
as I mentioned in first post.
4. currently I trying to fix low volume issue!!
5. As you all know I own only SM-G355HN and as I mentioned before there has to be maintainer for each device.
6. What I did regarding twrp for H and M, fix wifi and build roms for them it's because I wanted to encourage other devs (or user enthusiasts )who own devices to include themselves to build. Because I can see here on xda some folks started with development from scratch
7. end
and PS.
All my sources are up to date so anyone can use them and with detailed instruction how to build
https://github.com/Y300-0100/android_device_samsung_kanas3g
https://github.com/Y300-0100/android_device_samsung_kanas3gub
https://github.com/Y300-0100/android_device_samsung_kanas3gnfcxx/blob/master/README.md
fixed low volume issue!!
YES
I fixes low volume during typing stupid post above in 5 min.
So if you want me to commit it to my github I want to see 1000 thanks click by tonight
PS.
No 1000 more like 10 000
Y300-0100 said:
YES
I fixes low volume during typing stupid post above in 5 min.
So if you want me to commit it to my github I want to see 1000 thanks click by tonight
PS.
No 1000 more like 10 000
Click to expand...
Click to collapse
Well, if mods see this, your account will be... you know
Btw, good job. It's good to see more SPRD devices get CM
doesntexits said:
Well, if mods see this, your account will be... you know
Btw, good job. It's good to see more SPRD devices get CM
Click to expand...
Click to collapse
Thanks for info. But I didn't use any offensive word and if you are referring to 10 000 it's joke ended with
If they think that something should be "done" with my account so be it.
BTW it's already up to date. You know what
Y300-0100 said:
Thanks for info. But I didn't use any offensive word and if you are referring to 10 000 it's joke ended with
If they think that something should be "done" with my account so be it.
BTW it's already up to date. You know what
Click to expand...
Click to collapse
OK, the "10000" is what i referenced
Btw, seems you're missing some libs to get NFC working. Did you tried with any tags/devices?
If it doesn't work then, take a look at this: https://github.com/TheNikiz/android...fc3g/blob/cm-11.0/device_vivaltonfc3g.mk#L101
Some extras configs/packages for NFC are included there. See if any of them works with you
asser19 said:
What about the SM-G355H ? will it work or no ?
Click to expand...
Click to collapse
Sound fix will be but as I mentioned before MTP wont be fixed unless someone provide me stock boot.img for SM-G355H and SM-G355M.
and for a notice I have slow PC so for each build I need aprox 8 hours.
Build for SM-G355HN is uploading right now in SM-G355HN folder on mediafire.
doesntexits said:
OK, the "10000" is what i referenced
Btw, seems you're missing some libs to get NFC working. Did you tried with any tags/devices?
If it doesn't work then, take a look at this: https://github.com/TheNikiz/android...fc3g/blob/cm-11.0/device_vivaltonfc3g.mk#L101
Some extras configs/packages for NFC are included there. See if any of them works with you
Click to expand...
Click to collapse
I'm lazy. I will add packages and files for NFC. I did it before for some other devices, will tray to add FM and screen recording if hardware support it.
Y300-0100 said:
I'm lazy. I will add packages and files for NFC. I did it before for some other devices, will tray to add FM and screen recording if hardware support it.
Click to expand...
Click to collapse
FM is not supported by CM, so you've to implement your own
Also screen recording too. But, screen recording will lag like sh*t on these such devices
Y300-0100 said:
Sound fix will be but as I mentioned before MTP wont be fixed unless someone provide me stock boot.img for SM-G355H and SM-G355M.
and for a notice I have slow PC so for each build I need aprox 8 hours.
Build for SM-G355HN is uploading right now in SM-G355HN folder on mediafire.
Click to expand...
Click to collapse
Here is the stock boot.img form SM-G355M, it's from the last Samsung Update
boot.img
Hello, you can install the rom with TWRP-3.0.2-0-kanas3gnfc.img normally. Now I work MTP. Thank you very much, hoping for a newer version of android L or M.