*** DON'T FLASH THIS IF YOU ARE NOT COMFORTABLE WITH DATA LOSS, INSTABILITY, RABID DOGS EATING YOUR CAT, OR SPACE ALIENS STARING AT YOU IN THE MIDDLE OF THE NIGHT! ***
*** If you like this post and can't donate to the cause, then hit thanks! ***
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Credits:
Steve Kondik and the amazing CM team
See here for more contributors
And the many testers and contributors not listed above, including: thunderger, jaybob413, Everett Coleman, Pretoriano80, untermensch, Jorge Ruesga, Richard Huynh and others I probably forgot
*** Backup your data before continuing! ***
What works:
Audio
Hardware Acceleration
WiFi
GPS
Bluetooth
Accelerometer
Gyroscope
Compass
Touchscreen
HDMI
Microphone
USB host
Dock
Cameras
Encryption
Known issues:
Netflix has issues after pausing, rewinding or fast forwarding. (libomxplayer.so) It's an ASUS issue at this point. (FIXED? Please confirm, I'm not seeing these issues anymore)
screenrecord is broken, codecs issue (OMX doesn't support virtual displays, we only have 4.2 blobs, will not be fixed, unless Asus releases KitKat for our devices)
You tell us...
*** Backup your data before continuing! ***
Instructions (README, A LOT!!!!!!):
Make sure your device is unlocked. Grab the unlock utility here, under Others -> Utilities
(If you're on stock 4.2.x, skip this step) Install the 10.6.1.14.4 or greater bootloader for your variant, see here for more information.
Download Clockwork Recovery (TWRP has issues with KitKat, be forewarned): Standard | Touch
Download CM11.0
Download GAPPS
Place the cm-11-YYYYMMDD-NIGHTLY-tf700t.zip and gapps-kk-YYYYMMDD-signed.zip on your sdcard of your slate
Reboot to the bootloader: Power off slate, then: Power + Volume -. Hit Volume - until you hit the USB symbol, then hit Volume +.
Flash Clockwork Recovery instructions: Standard | Touch
^^ BACKUP YOUR DATA!
Next, Wipe Data Factory Reset (ONLY NECESSARY IF COMING FROM ASUS stock ROM or something other than CM10.2!!!)
Then 'install zip from sdcard', 'choose zip from internal sdcard', then install the cm-11-YYYYMMDD-NIGHTLY-tf700t.zip.
Then install gapps-kk-YYYYMMDD-signed.zip.
Go back to the main menu and Reboot Now.
Upgrading builds:
Reboot to recovery
Install cm-11-YYYYMMDD-NIGHTLY-tf700t.zip
Reboot
or use built in cmupdater
If you run into issues outside the 'Known issues', please post a logcat.
You will need the adb binary on your computer (Windows, Mac or Linux):
Code:
adb logcat > logcat.txt
If are get a hard lock and have to reset, please pull the /proc/last_kmsg and post it after you are booted again.
Code:
adb pull /proc/last_kmsg
Please do not report on ANY known issues!!!
Help? Click here...
Donate to the devs:
dasunsrule32 - (Google Wallet - [email protected] or PayPal)
jruesga
Source(s), Gerrit and Changelog:
Source(s):
https://github.com/CyanogenMod/android_device_asus_tf700t/tree/cm-11.0
https://github.com/CyanogenMod/android_kernel_asus_tf700t/tree/cm-11.0
Gerrit ( Submitting patches/fixes ):
http://wiki.cyanogenmod.org/w/Doc:_using_gerrit ( When submitting a patch, please use this group vs adding myself and individual devs: Transformer Team )
Changelog:
http://www.cmxlog.com/11/tf700t/
XDA:DevDB Information
CyanogenMod, ROM for the Asus Transformer TF700
Contributors
dasunsrule32, jruesga
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Bootloader 10.6.1.14.4 or above
Based On: CyanogenMod
Version Information
Status: Beta
Current Stable Version: 11.0-M9
Created 2013-10-01
Last Updated 2014-08-13
Reserved
Reserved
Reserved...
Double Reserved....
Ok guys, the new nightlies should be starting tonight. So keep an eye out. Thanks for all the support!!!
Please try to keep this thread clean, I want as much relevant information in it as possible. Please use the Thanks and Donate button(s)/links to say Thank you!!!!
Still a slight bit of lag on the home screen in portrait mode, logcat shows nothing interesting.
Something of interest is while I was flipping between screens, I got a hard lock and reboot, but I wasn't able to pull last_kmesg before it rebooted by itself.
Looking great though!
Updates through the CM updater do not work?
dasunsrule32 said:
Upgrade to stock ASUS Jellybean, see here. Flash the WHOLE ROM, not just the BOOTLOADER. This is especially important if you don't have access to your nvflash blobs...
Click to expand...
Click to collapse
what if youre already on unofficial 10/18? cant just flash over?
The Jack of Clubs said:
what if youre already on unofficial 10/18? cant just flash over?
Click to expand...
Click to collapse
Yes, but it will be best to do a factory restore before flashing, wich means your apps will be also wiped.
Why two threads???? One is enough i think.
The Jack of Clubs said:
what if youre already on unofficial 10/18? cant just flash over?
Click to expand...
Click to collapse
You need to wipe clean coming from any rom.
dasunsrule32 said:
You need to wipe clean coming from any rom.
Click to expand...
Click to collapse
Not really. Dont wipe, unless you start getting FCs is what most people follow
Had to wipe clean but everything works really nice now.
Thank you!
hiemanshu said:
Not really. Dont wipe, unless you start getting FCs is what most people follow
Click to expand...
Click to collapse
I want them to wipe clean. I don't want issues and reports cropping up from issues from other ROM's.
playback of a x264 hd movie with dts audio results in a fc after about 60 minutes. log file is sent to dasunsrule.
bt protocols, e.g.handsfree, avrcp, are missing.
plugin notifications,e.g. hdmi, don't work. see audio log.
audio output is not loud enough.
audio brightness is bad.
@dasundrule
please copy logcat instructions at device from the other thread so that people can create and send immediately logs.
there is still a lot to do.
While trying to build I got this error. Can anyone help? Thanks!
scripts/kconfig/conf --silentoldconfig Kconfig
host C++: aapt <= frameworks/base/tools/aapt/Command.cpp
host C++: aapt <= frameworks/base/tools/aapt/CrunchCache.cpp
host C++: aapt <= frameworks/base/tools/aapt/FileFinder.cpp
host C++: aapt <= frameworks/base/tools/aapt/Main.cpp
drivers/misc/inv_mpu6050/Kconfig:22:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:31:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:40:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:56:warning: choice value used outside its choice group
drivers/misc/inv_mpu6050/Kconfig:60:warning: choice value used outside its choice group
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Cross-compiler tool prefix (CROSS_COMPILE) []
Local version - append to kernel release (LOCALVERSION) [-cyanogenmod] -cyanogenmod
Automatically append version information to the version string (LOCALVERSION_AUTO) [Y/n/?] y
Kernel compression mode
> 1. Gzip (KERNEL_GZIP)
2. LZMA (KERNEL_LZMA)
3. LZO (KERNEL_LZO)
choice[1-3?]: 1
Default hostname (DEFAULT_HOSTNAME) [(none)] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
make[4]: *** [silentoldconfig] Error 1
make[3]: *** [silentoldconfig] Error 2
make[2]: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop.
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/jeremy/android/system/kernel/asus/tf700t'
make: *** [TARGET_KERNEL_BINARIES] Error 2
make: *** Waiting for unfinished jobs....
[email protected]:~/android/system$
It couldn't mount either of my SDXC cards. Not the Micro 64Gb in the tablet or the 128Gb in the dock. Both are formatted with fat32. It may have corrupted the 64Gb card as well. I'm not sure if Clockwork did it or if CM did it. Clockwork couldn't mount it either during the attempt to back up my current ROM and that may be when it was corrupted. Actually, I don't think it even saw that there was a card in the dock at all.
I'm having some ADB issues. When I try to run ADB from my Linux computer I get "no permissions", I see that the
ROM has got several settings for ADB and I've tried to play around with it but no fix so far. Any suggestions?
fordwolden said:
I'm having some ADB issues. When I try to run ADB from my Linux computer I get "no permissions", I see that the
ROM has got several settings for ADB and I've tried to play around with it but no fix so far. Any suggestions?
Click to expand...
Click to collapse
Try running it as super user.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Related
NEWS FEATURED ON THE PORTAL. THANKS TO POORCOLLEGEGUY:
http://www.xda-developers.com/android/unofficial-cm10-port-for-the-samsung-galaxy-s-plus/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Alpha 1: https://docs.google.com/file/d/0B-NPErilnJ2VVzJucElUcXpvWHc/edit
Google Apps: http://goo.im/gapps
- First time flashing CM10 to your Galaxy S Plus (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 2-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: Nandroids of CM7, CM9 and CM10 are incompatible due to partition layout changes. Please be on the correct version before restoring Nandroids.
What Works:
Audio
Video (sometimes youtube crashes)
Receiving and making calls
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
100% project butter
headset audio
Not Working:
camera
google search
you tell me
alpha 1 20120930 changelog:
butter 100 % (might be some glitches here and there)
headset fixed
speaker call now fixed. internal speaker works.
mic used for calling purposes works flawlessly
merged latest cm10 upstream fixes.
GUYS DON'T FORGET ITS A PREVIEW,BUGS WILL BE THERE. ALSO,THIS THREAD WILL NOT BE UPDATED VERY OFTEN,YOU GUYS KNOW THE REASON. (EXAMS) . THIS THREAD WAS CREATED BECAUSE THE PREVIOUS ONE WAS A TOTAL MESS. PEOPLE WERE NOT ABLE TO FIND DOWNLOAD LINKS.
Credits:
IVENDOR
ARCO68
CRYBERT
DASTIN1015
Screencast video: (thanks to VisualTech48)
Nice!
nice to see this here.
i think it would be better if a mod closes this thnread until you finished your exams successfull
im sure it will be spammed with questions for eta...
good luck to you and i hope you'll come back after your exams!:good:
I am trying to build CM10 ( based on Doomsday94 work ), but i need some help ,, while building it , i get these errors
:
find: `opengl/java': No such file or directory
find: `sax/java': No such file or directory
find: `telephony/java': No such file or directory
find: `wifi/java': No such file or directory
find: `voip/java': No such file or directory
find: `opengl/java': No such file or directory
find: `sax/java': No such file or directory
find: `telephony/java': No such file or directory
find: `wifi/java': No such file or directory
find: `voip/java': No such file or directory
find: `test-runner/src': No such file or directory
find: `test-runner/src': No such file or directory
find: `src': No such file or directory
*** Overlay change detected, clean shared intermediate files...
*** rm -rf out/target/common/obj/APPS/framework-res_intermediates out/target/common/obj/APPS/Phone_intermediates out/target/common/obj/APPS/Gallery2_intermediates out/target/common/obj/APPS/Mms_intermediates
No private recovery resources for TARGET_DEVICE ariesve
build/core/tasks/kernel.mk:174: warning: overriding commands for target `out/target/product/ariesve/kernel'
build/core/Makefile:38: warning: ignoring old commands for target `out/target/product/ariesve/kernel'
make: *** No rule to make target `out/host/linux-x86/bin/aapt', needed by `out/target/common/obj/JAVA_LIBRARIES/core_intermediates/javalib.jar'. Stop.
Click to expand...
Click to collapse
Please Help me in these errors , I Don't have experience :silly:
UpGado said:
I am trying to build CM10 ( based on Doomsday94 work ), but i need some help ,, while building it , i get these errors
:
Please Help me in these errors , I Don't have experience :silly:
Click to expand...
Click to collapse
haha,i am also new to the android world. just 4 months. about your issue,did you install jdk6 and android sdk properly? i hope you know that after you download the sdk,you have to you need to go to the directory,where you extracted it. then press ctrl+h to show hidden files,then up and open up your .bashrc file and add these lines at the bottom of the file.
# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin
i never got such an error. if it is not resolved,then pm me.
Thank you Doomsday94 for the build!
We all hope you succeed in your exams!
Are headphones working in this build ?
crisdorya said:
Thank you Doomsday94 for the build!
We all hope you succeed in your exams!
Click to expand...
Click to collapse
+1 vote . we should try it and feedback doomsday94
Ok, let`s get crackin`!
1) Phone boots up normally
2) Videos do not work from the web browser on YouTube
3) Music is played and the phone detects when the headphones are connected but sound comes out of the speaker.
When the headphones are disconnected, the music stops, thus the os detects the headphones but does not send audio.
4) Internal & External cards are detected and used
5) USB Mounting works on both internal and external storage
6) Without apps, ROM feels zippy and, may I say, "buttery"
7) Kernel is still 2.6.35.14 (?!)
Overall, it is a great start for CM10 on our device. The lack of headphone support and youtube playback is a downer for me, thus I will return to Biohazard v3.
Can not wait ffor the next build, whenever it comes out! (I just hope they will not come when my exams start rolling in )
@nguyenchienbig: Sow your post after I wrote my impressions. Are you a psychic or something? )
When calling sound is only coming out of the external speakers? Can i switch this or is this a bug?
Cant wait for the headphones fix
Great start, good job
I'll be on the look-out for the next build
Sent from my GT-I9001 using xda app-developers app
Sent from my GT-I9001 using xda premium
Great job man! I'm trying it and I think I will already keep for everyday use :thumbup:
Sent from my GT-I9001 using xda app-developers app
twrp
can I use twrp recovery to install this cm10
cistamlaka said:
can I use twrp recovery to install this cm10
Click to expand...
Click to collapse
yes you can
cistamlaka said:
can I use twrp recovery to install this cm10
Click to expand...
Click to collapse
yes.
Is the source of this on github??
Gesendet von meinem GT-I9001 mit Tapatalk
Youtube doesnt work because there is no Flashplayer in Jellybean.
XeLLaR* said:
Youtube doesnt work because there is no Flashplayer in Jellybean.
Click to expand...
Click to collapse
Just to ask....if install the flash player from the ICS will it work?
XeLLaR* said:
Youtube doesnt work because there is no Flashplayer in Jellybean.
Click to expand...
Click to collapse
I guess you can download it from the Play store, the flash player
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
General:
These are UNOFFICIAL CM12.0 Lollipop Nightlies brought to you by Open Desire Project and TeamCodefire as a continuum to 11.0 builds. Builds are generated automatically on Tue/Thu/Sat. Process starts around 00:30 PST/PDT. If it fails, then there will be no build until the reason for failure is taken care of which can take time. Last 7 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.
Thanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
Mustaavalkosta
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Githubs:
CyanogenMod
Open Desire Project
Changelogs:
CM Gerrit
CM Google+
Github (see above)
Installation instructions:
Download at OpenDesireProject.org
Download gapps from here
Put the files on SD card
Reboot to recovery
Do factory reset (ie. format /system, /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash cm-12-YYYYMMDD-UNOFFICIAL-saga.zip
Flash gapps zip
Remember to flash boot.img via fastboot if you have S-ON
Reboot and enjoy
Update instructions:
Download at OpenDesireProject.org
Put the file on SD card
Reboot to recovery
Flash cm-12-YYYYMMDD-UNOFFICIAL-saga.zip
Remember to reflash boot.img via fastboot if you have S-ON
Flash gapps
Reboot and enjoy
Kernel
Source: github
Compiler: stock AOSP gcc-4.8
Branch: cm-12.0
Kernel Version: 3.0.101
defconfig: saga_defconfig
Contact:
My Google+
#opendesireproject @ freenode
Donations:
For hosting: codefi.re (use the donation button)
For ODP mirror: opendesireproject.org (use the donation button)
I don't really need your money right now but if you insist on donating to me I suggest you donate that money to EFF instead here: https://supporters.eff.org/donate
FAQ:
Q: I cannot install the rom!!
A: Install this twrp -link-.
Q: How I can build CM12.0 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm12
cd cm12/
repo init -u git://github.com/CyanogenMod/android.git -b cm-12.0
mkdir -p .repo/local_manifests
wget https://github.com/OpenDesireProject/android/raw/cm-12.0/local_manifest.xml -O .repo/local_manifests/cm_odp.xml
repo sync
. build/envsetup.sh
lunch cm_saga-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/saga/ directory.
XDA:DevDB Information
CyanogenMod 12 Nightly Builds / OpenDesireProject, ROM for the HTC Desire S
Contributors
kylon, Mustaavalkosta, paulb_nl
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2014-11-27
Last Updated 2015-05-03
Reserved
Bugs:
first boot may take a while...
Headset mic in call
something else
kylon said:
Bugs:
first boot may require 50< minutes
Mic in call
front facing camera
something else
Click to expand...
Click to collapse
Wow, Lollipop for desire S.....just arrived and only few bugs? Greaaaaaaaaaaatttttttttt!
Thank you
Holy! I don't believe it! :laugh::silly::good:
Flashing ROM takes 5 minutes. Boot another 20.
edit1:
Gapps are broken, no play store there and keyboard is not working.
edit2:
Does not recognize my SIM. S2W is MAYBE working.
edit3:
USB debugging is working (after flashing SuperSU)
edit4:
Buttons are acting weird, the home button does not work?
edit5:
Those gapps are working.
edit6:
No gapps...
edit7:
WiFi is working.
edit8:
Camera is not working.
edit9:
Booting is significantly quicker than ever.
edit10:
I was able to pair bluetooth device and send a file but unable to receive a file(probably just me??)
edit11:
Some log is attached.
In stalled CM12-20141127-Unofficial-Saga.zip with lp-Apps plus chainfire supersu v.2.30. There is no google and cyanogenmod accounts pop up. Keboards FC, no phone service provider, wifi is working but without keyboard can not do anything. Very fast though. Thanks for bringing CM12 to our DS, I am very appreciated your team effort.
will wait till the rom gets updated
Will wait for 1 month until the gapps are updated and can work perfectly, and the bugs are fixed.Hope you will keep up the good work......!!
I got a error
ApplyParsedPerms: lsetfilecon of /system/lost+foset_metadata_recursive : some changes failed
E: Error executing updater binary in zip '/sdcard
Error flashing zip '/sdcard/cm-12-20141127-UNOFF
Click to expand...
Click to collapse
coolizz said:
I got a error
Click to expand...
Click to collapse
Did u update ur recovery like it says in OP?
Rom installed without errors on twrp 2.8.0.0 in 5min, Gapps wont install. Boot took less than 5min. AOSP Keyboard force close and, of course, no gapps.
I'm impressed!
jmcclue said:
Did u update ur recovery like it says in OP?
Click to expand...
Click to collapse
i flash twrp 2.8.0.0 but it wont load at my DS
flashed last twrp available from twrp site
coolizz said:
i flash twrp 2.8.0.0 but it wont load at my DS
flashed last twrp available from twrp site
Click to expand...
Click to collapse
I flashed the version from here. And it works fine.
GreyF said:
I flashed the version from here. And it works fine.
Click to expand...
Click to collapse
got a bootloop with that recovery
It works with that recovery. Did you Do a full wipe? The first Boot Can take a long time, wait at least half an hour.
WOOW I don't belive that I will test it on my sis phone
highly experimental build
don t expect bugs to be fixed, if it boots is a good start
https://mega.co.nz/#!ihUmETRQ!H7fwns1ZpEmuJ9JNfnqwh6wluJ6_DfbORc1dIVEA2Nc
kylon said:
highly experimental build
don t expect bugs to be fixed, if it boots is a good start
https://mega.co.nz/#!ihUmETRQ!H7fwns1ZpEmuJ9JNfnqwh6wluJ6_DfbORc1dIVEA2Nc
Click to expand...
Click to collapse
Hi Kylon, the new built does not boot, not even got to CM boot logo. So I extracted the boot.img and flashed; after flashing the boot.img it suddenly turned from the bootloader screen to black screen. Thanks for you and the team effort.
A log please? If you are s-on that should be normal
kylon said:
A log please? If you are s-on that should be normal
Click to expand...
Click to collapse
My phone is s-off. Please tell me how to get log. Thanks.
lol,flashed this 10 or more minutes ago,still boots up,is that normal?
EDIT : Everyone works fine,but :
No Gapps
AOSP Keyboard FC
A few buttons don't work?
*** DON'T FLASH THIS IF YOU ARE NOT COMFORTABLE WITH DATA LOSS, INSTABILITY, RABID DOGS EATING YOUR CAT, OR SPACE ALIENS STARING AT YOU IN THE MIDDLE OF THE NIGHT! ***
*** If you like this post and can't donate to the cause, then hit thanks! ***
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Credits:
Steve Kondik and the amazing CM team
See here for more contributors
And the many testers and contributors not listed above, including: chrmhoffmann, thunderger, jaybob413, Everett Coleman, Pretoriano80, untermensch, Richard Huynh and others I probably forgot
*** This is a development thread.
For questions and troubleshooting refer to this thread ***
*** Backup your data before continuing! ***
What works:
Audio
Hardware Acceleration
WiFi
GPS
Bluetooth
Touchscreen
HDMI
Microphone
USB host
Dock
Cameras
Encryption
Accelerometer
Gyroscope
Compass
Known issues:
Performance quicksetting tile isn't implemented yet (but is available through sys.cpu.mode property)
Dock battery indicator tile isn't implemented yet (but hardware works)
cm-recovery doesn't work (even boots)
lock key button in keyboard doesn't wake up the device
Netflix has issues after pausing, rewinding or fast forwarding. (libomxplayer.so) It's an ASUS issue at this point. (FIXED? Please confirm, I'm not seeing these issues anymore)
Screenrecording is broken, codecs issue (OMX doesn't support virtual displays, we only have 4.2 blobs, will not be fixed, unless Asus releases KitKat for our devices)
You tell us...
*** Backup your data before continuing! ***
Instructions (README, A LOT!!!!!!):
Make sure your device is unlocked. Grab the unlock utility here, under Others -> Utilities
(If you're on stock 4.2.x, skip this step) Install the 10.6.1.14.4 or greater bootloader for your variant, see here for more information.
Download Clockwork Recovery 6.5.0.1 here
Download GAPPS
Place the cm-12-YYYYMMDD-EXPERIMENTAL-JRUESGA-tf700t.zip (you can grab it from downloads section) and gapps-lp-YYYYMMDD-signed.zip (search in internet for a valid package) on your sdcard of your slate
Reboot to the bootloader: Power off slate, then: Power + Volume -. Hit Volume - until you hit the USB symbol, then hit Volume +.
Flash Clockwork Recovery
^^ BACKUP YOUR DATA!
Next, Wipe Data Factory Reset (ONLY NECESSARY IF COMING FROM ASUS stock ROM or something other than CM11.0!!!)
Then 'install zip from sdcard', 'choose zip from internal sdcard', then install the cm-12-YYYYMMDD-NIGHTLY-tf700t.zip.
Then install gapps-lp-YYYYMMDD-signed.zip.
Go back to the main menu and Reboot Now.
Upgrading builds:
Reboot to recovery
Install cm-12-YYYYMMDD-EXPERIMENTAL-JRUESGA-tf700t.zip
Reboot
or use built in cmupdater
If you run into issues outside the 'Known issues', please post a logcat.
You will need the adb binary on your computer (Windows, Mac or Linux):
Code:
adb logcat > logcat.txt
If are get a hard lock and have to reset, please pull the /proc/last_kmsg and post it after you are booted again.
Code:
adb pull /proc/last_kmsg
Please do not report on ANY known issues!!!
Help? Click here...
Donate to the devs:
dasunsrule32 - (Google Wallet - [email protected] or PayPal)
jruesga
Source(s), Gerrit and Changelog:
Source(s):
https://github.com/CyanogenMod/android_device_asus_tf700t/tree/cm-12.0
https://github.com/CyanogenMod/android_kernel_asus_tf700t/tree/cm-12.0
Gerrit ( Submitting patches/fixes ):
http://wiki.cyanogenmod.org/w/Doc:_using_gerrit ( When submitting a patch, please use this group vs adding myself and individual devs: Transformer Team )
Changelog:
http://www.cmxlog.com/12/tf700t/
XDA:DevDB Information
CyanogenMod TF700T CM-12.0, ROM for the Asus Transformer TF700
Contributors
jruesga, dasunsrule32
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: Bootloader 10.6.1.14.4 or above
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-19
Last Updated 2015-01-28
Reserved
Reserved
cm-12-20150118-EXPERIMENTAL-JRUESGA-tf700t.zip
This is the first experimental image for TF700T CM12.0 (Lollipop) cm-12-20150118-EXPERIMENTAL-JRUESGA-tf700t.zip.
Please, be sure you backup your data before flash it. This are the MUST HAVE requirements (Downloads):
* 10.6.1.14.4 or greater bootloader
* Clockwork Recovery 6.5.0.1 (I didn't test TWRP)
* GAPPS 5.0 (Lollipop) - Search in internet for the proper ones
This is an experimental versión, so expect things not working.
Will test with TWRP 2.8.0.1.
Installed it successfully (dirty flashed over CM11)! No FC 'til now. Thank you for your hard work! :good:
Process.com.google.process.gapps has stopped error.
I use basketbuild gapps everything ran well before I installed gapps.
dracinn said:
Process.com.google.process.gapps has stopped error.
I use basketbuild gapps everything ran well before I installed gapps.
Click to expand...
Click to collapse
Please, try to post a logcat when reporting an error
Code:
adb logcat > logcat.txt
I'm using 20141109 from http://d-h.st/users/dhacker29/?fld_id=27426
jruesga said:
Please, try to post a logcat when reporting an error
Code:
adb logcat > logcat.txt
I'm using 20141109 from http://d-h.st/users/dhacker29/?fld_id=27426
Click to expand...
Click to collapse
My logcat.
dracinn said:
My logcat.
Click to expand...
Click to collapse
The basketbuild gapps are 20141109 (5.0) but the current version of android is 5.0.2 and the GoogleContactsSyncAdapter is crashing because doesn't find a resource. Try to upgradte to the latest published version of the dhackers99 gapps (http://d-h.st/users/dhacker29/?fld_id=27426)
jruesga said:
The basketbuild gapps are 20141109 (5.0) but the current version of android is 5.0.2 and the GoogleContactsSyncAdapter is crashing because doesn't find a resource. Try to upgradte to the latest published version of the dhackers99 gapps (http://d-h.st/users/dhacker29/?fld_id=27426)
Click to expand...
Click to collapse
Appears to be the same problem as far as I can tell. Will try clean install.
Lollipop using data=F2FS
Does anyone know if this can be used if data is formatted to F2FS?
Also does the kernel support it?
norm883 said:
Does anyone know if this can be used if data is formatted to F2FS?
Also does the kernel support it?
Click to expand...
Click to collapse
Not yet. I will consider to add it to in my TODO list.
F2FS
jruesga said:
Not yet. I will consider to add it to in my TODO list.
Click to expand...
Click to collapse
Thank you sounds great!
I use this version as my daily driver. The only big thing that i miss is the not working auto rotation. When can we expect a new (experimental) firmware?
Thank you!
My Public said:
I use this version as my daily driver. The only big thing that i miss is the not working auto rotation. When can we expect a new (experimental) firmware?
Thank you!
Click to expand...
Click to collapse
We have a fix for the rotation problem. I will leak a new flashable zip this weekend with some other fixes
Wrong thread... Sorry' 'bout that.
Added on edit:
FYI, the Q&A / Troubleshooting links to the CM11 thread rather than the CM12 specific thread.
This is the correct link:
http://forum.xda-developers.com/transformer-tf700/help/tf700t-cyanogenmod-12-t3006630
John Kotches said:
Wrong thread... Sorry' 'bout that.
Added on edit:
FYI, the Q&A / Troubleshooting links to the CM11 thread rather than the CM12 specific thread.
This is the correct link:
http://forum.xda-developers.com/transformer-tf700/help/tf700t-cyanogenmod-12-t3006630
Click to expand...
Click to collapse
I updated the link to Q&A thread. Thx
I find this helps a lot with the chrome problem. Try this !
http://www.techrepublic.com/article/pro-tip-speed-up-chrome-on-android-with-this-handy-hack/
cm-12-20150126-EXPERIMENTAL-JRUESGA-tf700t.zip
New experimental version is up in the downloads section http://forum.xda-developers.com/devdb/project/dl/?id=10822
Changelog:
* Fix auto-rotation
* Update wifi/bluetooth rfkill driver to bcm4330
* Added bluesleep support
* Updated media codecs (should improve netflix playback)
* Updated selinux policies
* Removed camera wrapper and forced camera api 1 (this should prevent errors with third party camera apps)
* Set "High Performance" mode during boot
* CyanogenMod CM12 2015-01-16 upstream changes
Thx to chrmhoffmann and lj50036 for some of this patches
Please, read the OP before flash it if you came from other rom or cm11.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
General:
These are UNOFFICIAL CM12.1 Lollipop Nightlies brought to you by Open Desire Project and TeamCodefire as a continuum to CM 11.0 and 12.0 builds. Builds are generated automatically on Mon/Wed/Fri/Sun. Process starts around 00:30 PST/PDT. If it fails, then there will be no build until the reason for failure is taken care of which can take time. Last 7 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.
Thanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
Mustaavalkosta
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Githubs:
CyanogenMod
Open Desire Project
Changelogs:
CM Gerrit
CM Google+
Github (see above)
Installation instructions:
Download Nightlies
Download gapps from here
Put the files on SD card
Reboot to recovery
Do factory reset (ie. format /system, /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash cm-12.1-YYYYMMDD-UNOFFICIAL-saga.zip
Flash gapps zip
Remember to flash boot.img via fastboot if you have S-ON
Reboot and enjoy
Update instructions:
Download Nightlies
Put the file on SD card
Reboot to recovery
Flash cm-12.1-YYYYMMDD-UNOFFICIAL-saga.zip
Remember to reflash boot.img via fastboot if you have S-ON
No need to flash gapps as CM backuptool script should take care of them (results may vary depending on which gapps package you are using)
Reboot and enjoy
Kernel
Source: github
Compiler: stock AOSP gcc-4.8
Branch: cm-12.1
Kernel Version: 3.0.101
defconfig: saga_defconfig
Contact:
My Google+
#opendesireproject @ freenode
Donations:
For build server & hosting: codefi.re (use the donation button)
I don't really need your money right now but if you insist on donating to me I suggest you donate that money to EFF instead here: https://supporters.eff.org/donate
FAQ:
Q: I tried to flash the ROM and got this:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/..path od ROM.zip
(Status 7)
Installation aborted.
Or I'm having other recovery issues.
A: Download and install the latest recovery here.
Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
A: You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:
Code:
fastboot flash boot boot.img
You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.
Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r
Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]
Q: Hey, my old phone is running the latest Android version, i want to thank someone!
A: Press thanks button here
Q: I hate you for not fixing this issue X!!!
A: I love you too.
Q: How I can build CM12.1 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm12.1
cd cm12.1/
repo init -u git://github.com/CyanogenMod/android.git -b cm-12.1
mkdir -p .repo/local_manifests
wget https://github.com/OpenDesireProject/android/raw/cm-12.1/local_manifest.xml -O .repo/local_manifests/local_manifest.xml
repo sync
. build/envsetup.sh
lunch cm_saga-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/saga/ directory.
Q: Something about something something something.
A: Ask the guy/gal next to you.
XDA:DevDB Information
Unofficial CyanogenMod 12.1 Nightlies, ROM for the HTC Desire S
Contributors
kylon, Mustaavalkosta, paulb_nl, Phantom Shadow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Twrp 2.8.7.0
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-04-02
Last Updated 2017-01-04
Bugs / Not working stuff
headset mic in call
kylon said:
ffc camera
headset mic in call
Click to expand...
Click to collapse
Thanks, Kylon, Mustaavalkosta, Paunb_nl, and Phantom Shadow, for being active in supporting DS's community with up to date development. I am very appreciated your kind contribution. Thank you very much.
Writes
Not enough memory. Please delete minimum 250 mb...
I see in the settings is all right.
Phone has lags
Thank you so much!!!
EDIT: cyclic reboot
Lapyyyyyy said:
Writes
Not enough memory. Please delete minimum 250 mb...
I see in the settings is all right.
Phone has lags
Thank you so much!!!
EDIT: cyclic reboot
Click to expand...
Click to collapse
Yeah, I fell asleep before the build finished and I had chance to say the same here that I already said on the ace thread:
First build is now on the mirrors. Expect everything to be broken, be thankful for anything that works. There's no schedule for these nightlies yet as I haven't really had time to think how I'll juggle 3 different versions so they don't start compiling at the same time. New builds will come whenever I feel like making one until things settle down a bit and build schedule is decided.
Lapyyyyyy said:
Writes
Not enough memory. Please delete minimum 250 mb...
I see in the settings is all right.
Phone has lags
Thank you so much!!!
EDIT: cyclic reboot
Click to expand...
Click to collapse
Thanks, I got the same thing as you mention plus android keyboard FC. However, it is the first built, just booted up is alright. The rest is leaving for Mustaavalkosta to take care of. If DHD is working, DS should be working as well. Thanks for Mustaavalkosta hard work.
Hi Mustaavalkosta, CM-12.1-20150403-UNOFFICIAL-saga.zip faced the same issues as previous built, Android keyboard FC, not enough space for the system. There should be somethings wrong because the internal storage still has 1.03 GB available as well as my SDCard still has 14 GB available space. However, front camera is working on this built. I am wondering if it is possible to copy files related to camera from this built to CM-12 and which files should it be replaced. I am trying to produce logcat without success. I am sorry about that. Thank you very much for your great effort.
Thanks, Mustaavalkosta, I got the answer by replacing Camera2.apk from this built to CM-12 by installing using root explorer and front camera is now working on my device, CM-12 Rom.
kylon said:
ffc camera
headset mic in call
Click to expand...
Click to collapse
No, it is not. Front camera is working fine on CM-12.1. Thanks.
Can I perform update from CM12 to 12.1?
@qd42: Shouldn't be a problem since it's a minor Android update. But since this is in alpha state I'd suggest you wipe.
Same for me: "not enough space", keyboard FC on first boot (works good now in German). Front-camera works flawlessly. I'll be testing more.
Well, I'm tried to make update from CM12 and I don't reccommend to do this to others because of various system errors after boot like "android.process.acore errors".
How can i install this rom ?
I am using TWRP 2.8.5.2 as Recovery
I have swiped evertyhing i could on the phone
When i choose to install this ROM i get the Message: script succeeded result was /system
After flash boot.img, the Cyanogenmod-Logo still dont disappear after 10 Minutes ... (while booting)
€dit: Forget it. After 15 mins the Logo disappeared and the system has booted. But my SIM was not detected ...
€dit: SIM was detected ... but the phone tells me, i have less than 250mb free space ... wth ? I thought after a full wipe it should be at least 300mb free space ...
LuckyLoop said:
€dit: SIM was detected ... but the phone tells me, i have less than 250mb free space ... wth ? I thought after a full wipe it should be at least 300mb free space ...
Click to expand...
Click to collapse
It's a bug. As a temporary workaround remove /system/media/bootanimation.zip and warning should go away.
Mustaavalkosta said:
It's a bug. As a temporary workaround remove /system/media/bootanimation.zip and warning should go away.
Click to expand...
Click to collapse
Thanks MUstaavalkosta. So far, It is working fine. Flashed superSU v.2.48 beta makes it better. Ringtone is good, front camera is good. Just keyboad and google service have stop sign showed up some time. In fact they are still working. Thanks for your kind contribution.
I can't install any apps from the store get an error ’'-504''
Remove Boot animation before flashing as Mustaavalkosta suggested.
Okay,now that ive taken a break from studying,i can post a bug report on this. Accorrding to what ive seen,other than the known,solved ones,there are no other bugs. Much faster than 5.0.1 thats for sure. This is my new daily driver.
Sent from my SM-G900T using XDA Free mobile app
Hey guys, last time I flashed this the opposite side was not able to hear me upon my first call and the call quality was terrible when I returned the call after.
Of course I was in an area with good signal coverage.
Was this solved lately by any chance?
The space (LOL) problem is still unsolved. I believe that
Code:
55d502e msm7x30: use halfres bootanimation
was supposed to fix it.
vojtah1 said:
The space (LOL) problem is still unsolved. I believe that
Code:
55d502e msm7x30: use halfres bootanimation
was supposed to fix it.
Click to expand...
Click to collapse
How about without gapps? Works fine here on ace after that commit.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
*/
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!
Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.
22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)
28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)
09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)
24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)
21-11-2016:
Bringup
Installation Instructions
Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%
Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:
Code:
heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
twrp-cs02-3.1.1-0-20170512.tar
twrp-cs02-3.1.1-0-20170512.img
Thanks To/Credits
Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors
XDA:DevDB Information
TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)
Contributors
TimSchumi
Source Code: https://github.com/TeamWin?q=cs02
Version Information
Status: Stable
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-05-12
Created 2016-11-21
Last Updated 2020-09-13
Quick Update:
I now know what is causing the issues with non-block-based zip files. The Recovery does not have SELinux support by now, which would provide the metadata command it is complaining about. I will try to add in SELinux support and then release TWRP 3.1.0-0 with full flashing capability
It seems that I have the wiping gotten to work. Only SELinux remaining and I could make it official
Probably a new build will come?
EDIT: New build of TWRP 3.1.0-0 with fixed wiping is up!
is it flashable with rashr?
edit: yes it is.
A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.
Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).
TimSchumi said:
A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.
Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).
Click to expand...
Click to collapse
Thanks.
After flashing twrp.tar, only the original recovery is started.
What to do?
Grigori88 said:
After flashing twrp.tar, only the original recovery is started.
What to do?
Click to expand...
Click to collapse
Did you boot into the stock ROM after flashing TWRP? If yes, it was overwritten again because of that. You have to instantly reboot into recovery after flashing
It does not work for me, I do not know what happens
TimSchumi said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
*/
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!
Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.
22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)
28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)
09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)
24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)
21-11-2016:
Bringup
Installation Instructions
Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%
Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:
Code:
heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
twrp-cs02-3.1.1-0-20170512.tar (Primary, Mirror)
twrp-cs02-3.1.1-0-20170512.img (Primary, Mirror)
Thanks To/Credits
Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors
XDA:DevDB Information
TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)
Contributors
TimSchumi
Source Code: https://github.com/TeamWin?q=cs02
Version Information
Status: Stable
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-05-12
Created 2016-11-21
Last Updated 2018-03-26
Click to expand...
Click to collapse
When I perform the steps, load but give error, look:
Code:
heimdall flash --RECOVERY twrp-cs02-3.1.1-0-20170512.imgHeimdall v1.4.1
Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: Failed to receive PIT file part #16!
ERROR: Failed to download PIT file!
Ending session...
Rebooting device...
ERROR: Failed to receive reboot confirmation!
Releasing device interface...
Nasher_87-ARG- said:
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!
Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.
22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)
28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)
09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)
24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)
21-11-2016:
Bringup
Installation Instructions
Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%
Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:
When I perform the steps, load but give error, look:
Click to expand...
Click to collapse
1. Try a newer version of Heimdall
2. Checked the cable? Maybe try a different one.
3. Run Heimdall as administrator/root.
Thanks Tim
TimSchumi said:
1. Try a newer version of Heimdall
2. Checked the cable? Maybe try a different one.
3. Run Heimdall as administrator/root.
Click to expand...
Click to collapse
Perfect, I try. :good:
Heimdall is 1.4.1 version. Its ok, i think
The cable is new, no too new new but are you work to transfer data. Buy other
My too
Nasher_87-ARG- said:
Perfect, I try. :good:
Heimdall is 1.4.1 version. Its ok, i think
The cable is new, no too new new but are you work to transfer data. Buy other
Click to expand...
Click to collapse
I don't know what happens, same PIT problem