I have a Samsung Galaxy Grand 2 (SM-G7102). I tried to root it. Downloaded the root package from a website (odin and cf autoroot). Then turned USB Debugging On and Put Device on Download mode ( hold power,home,volume down to begin and then volume up to Activate Download Mode, Then I Selected CF Autoroot.rar in PDA and Flashed it... Moments Later.. It Showed "FAIL" on Odin and Everything Stopped. So i restarted the device and now it says "Issues ocured while upgrading device software,please run emergency recovery using kies" when i try that it asks for a code. But i didnt do that so im not supposed to have code. Help me with a Simple Solution Please. Quickly. Thank You.
XDA Visitor said:
I have a Samsung Galaxy Grand 2 (SM-G7102). I tried to root it. Downloaded the root package from a website (odin and cf autoroot). Then turned USB Debugging On and Put Device on Download mode ( hold power,home,volume down to begin and then volume up to Activate Download Mode, Then I Selected CF Autoroot.rar in PDA and Flashed it... Moments Later.. It Showed "FAIL" on Odin and Everything Stopped. So i restarted the device and now it says "Issues ocured while upgrading device software,please run emergency recovery using kies" when i try that it asks for a code. But i didnt do that so im not supposed to have code. Help me with a Simple Solution Please. Quickly. Thank You.
Click to expand...
Click to collapse
Hmm ... are you sure about the "CF Autoroot.rar" file?
It has to be a "tar" (or "tar.md5") file.
As long as you can boot into download mode again, no worry, you can fix it.
Check this thread: [CF-ROOT][SM-G7102][4.3] Root Galaxy Grand 2.
If you have questions about flashing CF-Autoroot, please register on xda (it's free), and post in the corresponding Q&A thread.
Alternatively, you can follow this guide for another rooting method: [GUIDE][HOW-TO]Easily root Galaxy grand 2 SM-G7102, but flashing CF-AutoRoot is a little bit easier IMO.
Related
Greetings;
Tonight, my friend and i wanted to root her phone... (Samsung Galaxy S2)
Unfortunately, not everything went as planed..
Files downloaded: Odin, SuperSU rooting, cm-11-20141119-NIGHTLY-i9100 and google apps and kernel..
First, we flashed kernel via Odin..then installed SuperSU from the recovery...Then the installation for Cyanogenmod11 failed...After that, the phone would not turn on..
Then, we downloaded firmware of the S2...flashed it via Odin..it stoped at 90-95% (or something like that)..and it said FAILED..
Then she turned off her phone..and the error appeared..“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
..She couldn't get pass that message..She turned of her phone, got the battery out for 10 sec.. She cant enter the download mode nor the recovery mode..
Please..i beg you for some help.. ..I would hope that this resolves with a successful fix..i wouldnt want to be responsible for anyone's phone nor do i wish to see her disappointed...
Thanks in advance
Cheers
Hi, I have a problem with my Samsung Galaxy Core 2 (SM-G355H). I tried to install the official firmware for this model that I get from SamMobile by using Odin, and everything went good, no "failed" and it was showed PASS as it should. But then when I tried to reboot it, it just didnt reboot. Now I can enter to download mode, but not into recovery mode or just start it normally. Are there any possible solutions? I would really appreciate any help.
stock recovery not working tried twice
cwm not working it just shows open android chest sign but no options in recovery menu.
odin passed stock recovery
but phone turns on till EULA and all process failed eg. googlemaps failed, systemprocess.com failed, android process failed everything just fails.
need help
Hi,
You are taking the right steps. I would create a thread here and ask for help from the experts who own your device, http://forum.xda-developers.com/t/galaxy-core-2
Good luck!
hy
First of all i want to say two things:
1. This thread was opened after reading 179 similar threads and browsed all 260 pages of q&a answers
on the galaxy tab 2 and other several threads on Samsung products with similar symptoms.
2. Thank you in advance to however is able to resolve this issues, not only for me, but for several others.
the section is full of similar problems with no answer whatsoever.
The story:
My Samsung p5110 WiFi only (stock firmware), started to restart randomly and at one point froze at the Samsung logo.
I was able to enter in download mode, and with odin i "managed" to load the firmware for p5100.
And that was the mistake. at restart started to display: “Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again“. But kies does not connect and recognize the device at all.
so out of the question to salvage the device in that mode.
Odin still recognizes the device, so i was able to load several stock firmwares:
P5110XXBLH4_P5110OXXBLH3_HOME.tar.md5
P5110XWALD4_P5110OXXALD5_HOME.tar.md5
P5110XXDNB1_P5110COADNB1_HOME.tar.md5
everything goes ok, it says pass, but there is no restarting, the screen goes black. when i turn it on
the same thing: "firmware upgrade.....
Tried to load CWM and TWRP recovery in order to delete everything in the device, installed ok but
no effect, it is not launching, only: "firmware upgrade....
I want to point out that USB mode was to enabled do to the fact that the tablet broke so it was not
planned, i have uninstalled kies and installed the samsung and omap drivers now, same results, and tried
all the usb ports.
I am running out of ideas and other suggestion i haven't found on this site up until now, so any
constructive help and comments will be welcomed by me and more than likely by the others in
my situation.
use odin in this way
blice said:
hy
First of all i want to say two things:
1. This thread was opened after reading 179 similar threads and browsed all 260 pages of q&a answers
on the galaxy tab 2 and other several threads on Samsung products with similar symptoms.
2. Thank you in advance to however is able to resolve this issues, not only for me, but for several others.
the section is full of similar problems with no answer whatsoever.
The story:
My Samsung p5110 WiFi only (stock firmware), started to restart randomly and at one point froze at the Samsung logo.
I was able to enter in download mode, and with odin i "managed" to load the firmware for p5100.
And that was the mistake. at restart started to display: “Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again“. But kies does not connect and recognize the device at all.
so out of the question to salvage the device in that mode.
Odin still recognizes the device, so i was able to load several stock firmwares:
P5110XXBLH4_P5110OXXBLH3_HOME.tar.md5
P5110XWALD4_P5110OXXALD5_HOME.tar.md5
P5110XXDNB1_P5110COADNB1_HOME.tar.md5
everything goes ok, it says pass, but there is no restarting, the screen goes black. when i turn it on
the same thing: "firmware upgrade.....
Tried to load CWM and TWRP recovery in order to delete everything in the device, installed ok but
no effect, it is not launching, only: "firmware upgrade....
I want to point out that USB mode was to enabled do to the fact that the tablet broke so it was not
planned, i have uninstalled kies and installed the samsung and omap drivers now, same results, and tried
all the usb ports.
I am running out of ideas and other suggestion i haven't found on this site up until now, so any
constructive help and comments will be welcomed by me and more than likely by the others in
my situation.
Click to expand...
Click to collapse
well i had the same problem with my GT-P3113
there is one way i know to solve this which worked for me.
1. flash TWRP/CWM
a)first make sure that you find the rooted md5 firmware for your device.
[this is my 5th post so i cannot add links. so you can always search in xda for other threads regarding your device's rooted md5 so that you can flash using odin.]
b)now flash the rooted md5 using odin
c) flash TWRP/CWM Using odin(i would prefer CWM)
d)then downlaod a custom rom for your device and place it in your sd card.
e)flash it using your recovery
f)now try rebooting and you should go into the new rom
g)now check usb debugging in the settings>about device>touch on build number 7 times>you will see developer options>check usb debugging.
h)now try flashing the original stock firmware using odin
CONGRATS YOU HAVE SOLVED THE PROBLEM OF YOUR DEVICE
NOTE:if you still have any problem with booting or if you are stuck in the boot logo try going to recovery and do a factory reset.
if still you have any questions let me know.
Similar problem but odin doesn't recognise device
Hello guys. I have big issue with this. I tried also flashing from sd new cwm since its factory but it start process and than say signature verification failed. Trying also different roms but no success. I can not do basically anything. Even for sdk tool computer must recognise device (I do have drivers and they work with all other devices ) and still it doesn't recognise. I am out of options. Please help?
Hello,
I had the same problem with my tab 2..I solved it the same way in this video..
Here's the link: http://m.youtube.com/watch?v=0NXBN9Z63TY
---------- Post added at 06:59 PM ---------- Previous post was at 06:55 PM ----------
If this didnt work out you can flash a custom rom through cwm.
Here try this rom.
http://download.mokeedev.com/?device=p5110
If still any problem persists pls send me a message.
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to hert screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7562) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to the start screen with Samsung logo and phone model) with connecting to phone or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
billysam said:
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
Click to expand...
Click to collapse
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
[email protected] said:
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
Click to expand...
Click to collapse
Well you were saved. always make sure about the device model before flashing. anyways it's the wrong thread here. its not a big issue and don't need very complex method. just download the stock firmware you want from sammobile and flash it through odin.
Hi, So I wanted to Root my Galaaxy SM-G361H
and as Expected things got wrong... I enabled USB debugging
and connected the Phone to Odin then Started rooting and then my Brother touched POwer plugin of my PC now I get a message " Firmware upgrade encountered and issue. Please Select recovery mode in Kies & try again" I downloaded both Kies 3 and Kies but none of them Works
what should I do?
FAP lock is on (if that's meaningful - Didn't Touch OEM in settings before cuz Guide didn't said so)
please Help !!
Thread closed,OP reposted
http://forum.xda-developers.com/general/help/samsung-sm-g361h-soft-bricked-pls-help-t3466095