Is possible to emulte the roms on my pc? I've just Android SDK.
Inviato dal mio HTC Incredible S usando Tapatalk
Take a look here:
http://forum.xda-developers.com/showthread.php?p=4420071
and here:
http://www.howtogeek.com/howto/2183...le-android-on-your-pc-without-buying-a-phone/
I remember I tried it once, and it was working for me, not sure you can run gingerbread on it thus..
EDIT: Here I found a gingerbread guide:
http://www.theiloop.com/try-android-2-3-gingerbread-on-windows/
Thank you!
Inviato dal mio HTC Incredible S usando Tapatalk
No problem, but next time to avoid unecessary post just hit the "thank you" button.
Hi.
I hope someone can be so kind to link me or upload a working
cm-10.2-20131221-NIGHTLY-p5100.zip
File. Or newer build...
It's OK that is a 10.2 version
All 10.2 versions has been removed from official download page but i don't want yet to migrate to 4.4 but keep using 4.3
Hope someone can urgently help me.
Thanks in advance
Inviato dal mio GT-N7100 utilizzando Tapatalk
loft argEur
toxstoxs said:
Hi.
I hope someone can be so kind to link me or upload a working
cm-10.2-20131221-NIGHTLY-p5100.zip
File. Or newer build...
It's OK that is a 10.2 version
All 10.2 versions has been removed from official download page but i don't want yet to migrate to 4.4 but keep using 4.3
Hope someone can urgently help me.
Thanks in advance
Inviato dal mio GT-N7100 utilizzando Tapatalk
Click to expand...
Click to collapse
Nobody is so kind to upload a CM 10.2 12/2013 or early 2014 image for P5100?
Please guys...
thank's
Really nobody?
Inviato dal mio GT-N7100 utilizzando Tapatalk
I have a TL-WN722N external wifi adapter, I want it to connect to my oneplus one as a secondary wifi, but when I connect it through OTG, I am not sure if the adapter is being detected by my device (attached screenshot of dmesg). The ifconfig app for android also do not list the wifi adapter.
Can anyone guide me how I can get it to work and use it as my secondary wifi ?
[EDIT1]
Can anyone guide how i can import the ath9k driver using this guide ?
https://community.freescale.com/docs/DOC-93603
Try to use nethunter
I tried my tp-link in monitor mode and it works very well.
Sorry for bad english
Inviato dal mio A0001 utilizzando Tapatalk
nethunter worked well with CM11, have used it but with CM12 its not stable, so is there any way to get it work with cm12 ?
akss009 said:
nethunter worked well with CM11, have used it but with CM12 its not stable, so is there any way to get it work with cm12 ?
Click to expand...
Click to collapse
I think it's possible , but do not know how ... you've tried nethuther 2.0 ?
Inviato dal mio A0001 utilizzando Tapatalk
nik012003 said:
I think it's possible , but do not know how ... you've tried nethuther 2.0 ?
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
yes already tried with 2.0, I had cm11 as secondary rom and used nethubter 2.0 for cm11 that works great with external wifi support as well, but with cm12 its stuck in bootloop, and so i need to get it work with cm12 in my primary rom , so the problem remains external wifi support with cm12 as the device is being detected but drivers are missing, the guides i found for other models aren't working.
I ve got this strange problem - a friend has a KD MTCD RK3188 unit and he needed a hand doing a few things, as I have a lot of experience with MTCB/C units he asked me for help.
He had remapped a couple of keys and wanted them changed and wanted the RGB LEDs on (they were set to one colour). So I went into factory settings and remapped the keys and set the LEDs to RGB, but then unit wouldnt boot - the LEDs flashed once and that was it, nothing.
So I went into recovery and updated the MCU to a later version, still the same, so then I updated the ROM and the MCU to the latest, the updates went fine, I wiped data/cache several times, but still the unit wont boot to system, only recovery.
I find this weird cos its kind of bricked but at the same time not because all the updates were successful.
It would seem that, strangely, remapping the buttons/turning on RGB LED (they are deffo RGB - the colour has changed) has caused this, anyone know if theres a way to restore factory MCU settings ?
Or of course there could be a problem with the screen . . .
Anyone got any ideas
After updating mcu/rom, did you wait till 20 minutes for the reboot?
You could try to install malaysk rom or original firmware
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
After updating mcu/rom, did you wait till 20 minutes for the reboot?
You could try to install malaysk rom or original firmware
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
No, I didnt wait 20 mins.
I installed the latest firmware, I cant see how an older firmware or Malaysk's will help - the updates install ok, but I just cant see the screen.
EDIT: I left it overnight and still the same problem.
typos1 said:
No, I didnt wait 20 mins.
I installed the latest firmware, I cant see how an older firmware or Malaysk's will help - the updates install ok, but I just cant see the screen.
EDIT: I left it overnight and still the same problem.
Click to expand...
Click to collapse
Did the unit freeze in Lollipop logo or the next One?
I had remapped physical buttons and i had no problem (mine is a KD unit).
Last temptative: use another mcu (I tried the JY mcu and booted well).
If you search in forum, another user and i interchanged mcu with no problem (you Can find in KD thread)
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
Did the unit freeze in Lollipop logo or the next One?
I had remapped physical buttons and i had no problem (mine is a KD unit).
Last temptative: use another mcu (I tried the JY mcu and booted well).
If you search in forum, another user and i interchanged mcu with no problem (you Can find in KD thread)
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
No it didnt freeze, it just totally failed to boot.
I ve tried 3 MCUs.
But I have just found an mcu.cfg file on an sd card which may very well sort things out . . .
typos1 said:
No it didnt freeze, it just totally failed to boot.
I ve tried 3 MCUs.
But I have just found an mcu.cfg file on an sd card which may very well sort things out . . .
Click to expand...
Click to collapse
I wanna Say: otherwise try with another type of mcu.
Good luck
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Yay - the mcu.cfg file sorted it !
Cant see how changing what I did in factory settings would stop the unit booting, but still.
And the MCU and ROM updates I did whilst the unit was "dead" worked, now running the latest ROM and MCU.
colostro said:
I wanna Say: otherwise try with another type of mcu.
Good luck
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
Fine!
Can you share mcu.cfg?
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
Fine!
Can you share mcu.cfg?
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
I could but it would probably only work if you have the exact same unit as me.
I have a KD hu
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
I have a KD hu
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
Ok, but unless its the exact same one as the one I used it on it might not work because the buttons might be different, do you have a picture of your unit ?
It's a custom fit for a Kia ceed
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
It's a custom fit for a Kia ceed
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
Right, this one os custom fit VW/Skoda/Seat so the button layout will be different, not sure if it will work.
Hi guys, i have the same identical problem. After changing color led and boot logo in factory settings of my headunit doesn't reboot anymore, its remaining on the black screen in bootloop. I tryed to flash mcu /rom many times but nothing to do. In the rear shift its showing camera screen , after that black again. Now i ask some user of my same headunit to send me the mcu.cfg because i thinging that is the problem. My headunit also is specific vw canbus decoder, erisin es6405v px5 kgl model. I need this mcu.cfg file. :angel:
focos said:
Hi guys, i have the same identical problem. After changing color led and boot logo in factory settings of my headunit doesn't reboot anymore, its remaining on the black screen in bootloop. I tryed to flash mcu /rom many times but nothing to do. In the rear shift its showing camera screen , after that black again. Now i ask some user of my same headunit to send me the mcu.cfg because i thinging that is the problem. My headunit also is specific vw canbus decoder, erisin es6405v px5 kgl model. I need this mcu.cfg file. :angel:
Click to expand...
Click to collapse
I could send you my file if you want, but as I said before its the specific config that your unit had thats needed really. Think its best practise to make and mcu.cfg file and put it somewhere safe as soon as you get a unit.
The canbus decoder isnt really relevant and nor is the board type really, this is an MCU problem.. Its not an Erisin, BTW Erisin are sellers only, you have a KGL.
Of course KGL unit, but in this way you can see the model if is the same. Thank you.
---------- Post added at 04:36 PM ---------- Previous post was at 04:09 PM ----------
typos1 said:
I could send you my file if you want, but as I said before its the specific config that your unit had thats needed really.
Click to expand...
Click to collapse
So you check my KGL headunit model and you think it is compatible with the mcu config file you have? For what unit is exactly that backup?
colostro said:
I have a KD hu
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
I dont think its the type of MCU that matters, its the config - how all the settings were on my friend's unit were set and if yours was different it may not help, although having said that it might.
focos said:
Of course KGL unit, but in this way you can see the model if is the same. Thank you.
So you check my KGL headunit model and you think it is compatible with the mcu config file you have? For what unit is exactly that backup?
Click to expand...
Click to collapse
I already said earlier in this thread, a VW JY unit, but as I said the mcu.cfg file simply sets the configuration of the MCU - it stores all the factorys settings.
I also said to another user it would be no good for his (different style to my friend's MTCD) unit - I think it could theoretically work on any MTCD MCU regardless of from which manufacturer, but if the mcu.cfg DOES work on any MTCD, the mcu.cfg file from my friend's unit may not necessarily sort out your problem - the settings on my friend's unit may not restore yours.
Solved. It was the same problem, changing rgb color in factory settings will brick the unit. I recovered my headunit using the dmcu.cfg file from the same unit model, thanks to @wolfymozart. :good:
focos said:
Solved. It was the same problem, changing rgb color in factory settings will brick the unit. I recovered my headunit using the dmcu.cfg file from the same unit model, thanks to @wolfymozart. :good:
Click to expand...
Click to collapse
Interesting, the unit I had the problem with is for VW group cars some of which have blues dash lights, some red and some blue, so they should be RGB.