[Q] hang on the Setup screen - Transformer TF300T Q&A, Help & Troubleshooting

Hello, I got a tablet, I could open it to properly put the power button because the previous owner had had pressed too hard.
I realized that he had opened because the activation button to the right of the power button was to off.
I wanted to know if it is possible it is to forget to reconnect the water table that manages the tactile part.
Because I have a display without the touchscreen does not work, my tablet is stuck on the factory configuration screen. Thank you in advance for your answers.

Related

[Q] power button problem

i have samsung SGH i780 windows mobile phone. it has a problem power button not working correctly. power button touch a bit mobile is switch off after difficult to switch on when i remove a battery and plug again mobile is switch on without pressing power button. have any solution to fix the problem.
thanks
sounds like you need to open the device and look inside, my guess is that the plastic power button is not inserted/aligned properly.
(which is why it turns off and on the way it does)
(probably due to a recent drop of your device)
you should view the wiki for your device on how to get inside to have a look.
im pretty sure this is whats wrong with your power button dude = sometimes this happens to me when putting my device back together.
(power button needs re-aligning)
Rn
Red Hook and press the green call key while pressing the power key, hard reboot confirmation screen appear, press the space bar to confirm, and then the phone restart. After the initial setting, the screen calibration (points 5 times the cross), the initial state of the mobile phone back to just brush up ROM. After loading the program, and personal information are lost, so hard before the restart must be careful to save personal information.
____________________________________
http://www.2deals.net/
http://www.cpu-cooling-fan.com/
http://www.canonbatterycharger.co.uk/
i do not think his device needs a hard reset.
(it is defo the alignment of the power button inside the device!)
Rn

[Q] Broken Power Button t300t

I have a t300t and the power button is not working at all. I can not turn the device off, or reboot. The only way I can wake it up is to un-dock it. We have tried to readjust the tape and metal contact but it does not work. I am to the point that I think that the power switch itself is bad. Any advice other that trying to get ASUS to replace it?

[Q] start screen lock doesn't move on Zeki tablet

I am brand new to android and my less than a week old Zeki tablet 7 inch. It was working. I decided to move the opening screen to the left and had a nice uncluttered just wallpaper screen when I turned it off. Now when i turn it on I have the picture of the lock but it no longer moves and there is no unlock icon showing to move it to.
How can i fix this so the tablet is usable?
Thank you in advance for any suggestions.
Fixed
4stuff said:
I am brand new to android and my less than a week old Zeki tablet 7 inch. It was working. I decided to move the opening screen to the left and had a nice uncluttered just wallpaper screen when I turned it off. Now when i turn it on I have the picture of the lock but it no longer moves and there is no unlock icon showing to move it to.
How can i fix this so the tablet is usable?
Thank you in advance for any suggestions.
Click to expand...
Click to collapse
I was going to remove the post, but thought this might help someone else. From Zeki support I found this.
Make sure your tablet has a full charge
Press and hold the Volume ā€“ button and tap the Reset button
(The reset button is located between the HDMI and USB ports)
Continue holding the Volume ā€“ button until the boot screen appears
Release the Volume ā€“ button
The reset button is not a button and requires an insertion into a tiny hole. I used an opened paper clip and repeatedly pressed on it while holding the volume and opening screen is back and tablet works.

How to switch off with nonfunctional display?

Hi,
I have broken my display recently and now Iā€™m facing a riddiculous problem. How do I switch the phone off, when the screen is not working? The phone is working well, however I am not able to switch it off in order to prevent further damage, as the screen s cracked open. The only thing I managed to do was to restart by holding the power button pressed.
Thanks for any piece advice.

[Q] the power button got crazy

Hi,
Since 1 month my Nexus 5 has a weird bug : when I hit the power button, it seems to be activated twice or more, the screen shows "screen on / screen off". So when I want to screen on my phone, it's immediately followed by a screen off, and when I want to screen off it, it screen on.
More embarrassing, the power button seems to remain pressed sometimes and induces random reboots or power off my phone.
I suppose it's a physical problem with the power button which may got dust inside his mecanism. So I wonder if anyone of you have an idea to fix it. Maybe by opening the phone and scratch it with a smooth brush it can be cleaned ?
Thank you in advance for your help....

Categories

Resources