I maked this request cause i need to flash a working recovery for d2303, also for testing in lollipop
https://mega.co.nz/#!o4NFhCqD!WFB6EB_oNS48nE_ZK_5ljhLMg-hUaZi3LQ0a74UPPas
He verifies first since I have several of different phones and have her had look on the external hard disk
It's compatible whit lollipop, right?
Recovery for stock firmware .22 ??? need.
I ll be able to enter recovery and flash things ? right?
i using for installation and desinstallation cianogenmod.
Related
hi
first sorry for my bad english
My tablet was on 4.0.3 Offical Version , I unlocked it and succesfully root it
Today i Flashed cm-10.1-20130105-NIGHTLY-tf300t with wrong CWM !
For now , i can go to recovery and USB Flash .
But i dont have any rom in my sd card except cm-10.1-20130105-NIGHTLY-tf300t
I Use Cwm back up my "offical 4.0.3" rom before install CM10.1 but now when i restore that it doesnt work and My Tablet hang on ASUS Logo
What can i do ?!
To switch from ICS 4.0.x to JB 4.1.x or 4.2.x (which is CM10.1) you need to first flash the actual official rom from ASUS, flash a new bootloader, i recommend TWRP at this point, via Fastboot.
To flash the official rom you need to unzip it once and then flash the new zip.
Then flash a new bootloader for JB via fastboot.
Now flashing CM 10.1 should work fine.
When I'm in this situation i use my external sdcard to get new roms to my transformer.
If you don't have a micro SD or aren't able to get to it without the transformer you should use ADB Sideload.
Therefore:
-update your android sdk (Tools and Plattform Tools)
-flash TWRP with fastboot: http://teamw.in/project/twrp2/97
-install a new rom with ADB Sideload: http://teamw.in/ADBSideload
markusg90 said:
To switch from ICS 4.0.x to JB 4.1.x or 4.2.x (which is CM10.1) you need to first flash the actual official rom from ASUS, flash a new bootloader, i recommend TWRP at this point, via Fastboot.
To flash the official rom you need to unzip it once and then flash the new zip.
Then flash a new bootloader for JB via fastboot.
Now flashing CM 10.1 should work fine.
When I'm in this situation i use my external sdcard to get new roms to my transformer.
If you don't have a micro SD or aren't able to get to it without the transformer you should use ADB Sideload.
Therefore:
-update your android sdk (Tools and Plattform Tools)
-flash TWRP with fastboot: http://teamw.in/project/twrp2/97
-install a new rom with ADB Sideload: http://teamw.in/ADBSideload
Click to expand...
Click to collapse
After flashing twrp 2.3.3
I flashed Stock Rom [ Rooted ] From this topic via twrp 2.3.3 [ this topic : http://forum.xda-developers.com/showthread.php?t=1893714&highlight=stock
And after that I flashed boot.blob via fastboot
But now my tablet hangs again on ASUS logo !
I have access to recovery and fastboot mod
what can i do now ?!
is there any way too boot tablet ?
After flashing cm9 my problem solved !
But plz can some one tell me how i can flash JB roms on my tablet ?
i dont know how i can flash jb bootloader , plz help me
flash a stock ICS via fastboot and take the OTA update from Asus, should work afaik, but will overwrite all your datas except SD card, including Reovery
-angel* said:
flash a stock ICS via fastboot and take the OTA update from Asus, should work afaik, but will overwrite all your datas except SD card, including Reovery
Click to expand...
Click to collapse
After unlocking bootloader OTA Update will not work and there is no way to "lock" bootloader !
Come on... What you are asking for is in the first sicky post on this section... Here is the link.
So, the situation is I have moto g xt1033 with :- unlocked bootloader, rooted, stock rom 4.4.4 kitkat (i mean no custom rom). and fastboot flash mode 41.13 2014-06-16 and philz touch 6 clockworkmod v6.0.4.7
I want to know how to update to lollipop with official OTA update (not manually or sideloaded)?
Why I am asking this?
I got the prompt of official OTA available on my phone and then i clicked yes and downloaded the update. But when i clicked on install, it went in bootloop. It boots on the philz recovery mode and then nothing happens just restart again whatever i select.
As of now, as I backed up, I recovered to the before state of the phone. Do I need to lock the bootloader again or what? The official OTA update is not for me? Then how to get lollipop? I read the soak test etc threads but why not official update ?
Locking the bootloader won't do anything,so don't lock it
Ota update requires:
1.Stock firmware(unmodified and unchanged or tampered)
2.unrooted
3.Stock recovery
That probably happend becuZ your KitKat firmware was modified and you have custom recovery,root..
So just reflash the stock firmware
Do that on your own risk as failing this might brick your phone
Thank me if I helped
Thanks mate for reply.
1. I have stock firmware KK 4.4.4 (though xposed framework & few modules are installed currently)
2. Rooted
3. What is stock recovery? (m noob here)
And i guess reflashing the stock firmware wipes out all user data & apps, right?
Any other alternative which does not wipes out my data?
instinctblade said:
Locking the bootloader won't do anything,so don't lock it
Ota update requires:
1.Stock firmware(unmodified and unchanged or tampered)
2.unrooted
3.Stock recovery
That probably happend becuZ your KitKat firmware was modified and you have custom recovery,root..
So just reflash the stock firmware
Do that on your own risk as failing this might brick your phone
Thank me if I helped
Click to expand...
Click to collapse
pr.itdude said:
Thanks mate for reply.
1. I have stock firmware KK 4.4.4 (though xposed framework & few modules are installed currently)
2. Rooted
3. What is stock recovery? (m noob here)
And i guess reflashing the stock firmware wipes out all user data & apps, right?
Any other alternative which does not wipes out my data?
Click to expand...
Click to collapse
Actually there is no other way you could do it
i tried everything i could to stop the wipe procedure but it obviously wiped everything
you just backup everything you have got on your internal and external sd card ..
1.Stock Recovery:: Android devices come with Google’s recovery environment, which is often referred to as the “stock recovery.” You can boot to the recovery system by pressing device-specific buttons as your phone or tablet boots or by issuing an adb command that boots your device to recovery mode. The recovery menu provides options to help recover your device — for example, you can reset your device to its factory default state from here. The recovery mode can also be used to flash OTA update files.
2.Custom Recovery::A custom recovery is a third-party recovery environment. Flashing this recovery environment onto your device replaces the default, stock recovery environment with a third-party, customized recovery environment. This is a bit like flashing a custom ROM like CyanogenMod — but, instead of replacing your device’s Android operating system, it replaces the recovery environment.
what you have to do is:
Find the Kitkat official update on the internet accrouding to your [Build number],[model number] [system version] you can get this information in about phone....
If you have asia retail then follow this method http://forum.xda-developers.com/showthread.php?t=2700502
ok Here what i am planning:
1. Uninstall all modules & xposed framework
2. Unroot using supersu
3. Restore/reflash stock recovery (just recovery not whole firmware as I already have stock rom)
4. Install the update either manually via recovery or using auto install.
Am i on right path? Pls help me on step 3, any link or step-t-step guide? I couldn't find one, every post is abt restoring whole firmware.
TIA. Cheers !!
Hi!
I would like to know if it is possible to restore the 4.4.4 kit kat backup on a 5.1. lollipop system. So basically i would like to update to 5.1 but then I may want to revert back to 4.4.4 with the back up of recovery's 4.4.4 (which is stored on a memory card) Is it possible? Is there a root out for 5.1 yet? please help me if you can.
EDIT:
Here is the solution how to root and install recovery on .368 firmware:
http://techbeasts.com/2015/09/18/ro...ria-z1-compact-android-511-146a0368-firmware/
This is how you create your own FTF firmware with XperiFirm and FlashTool:
http://www.xperiablog.net/2014/08/1...re-files-using-xperifirm-and-flashtool-guide/
This is how you make a pre rooted, flashable zip:
http://techbeasts.com/2015/07/26/how-create-sony-xperia-pre-rooted-firmware-prf-creator/
I hope everything is clear now. I followed the steps above and it is working fine.
akos28 said:
Hi!
I would like to know if it is possible to restore the 4.4.4 kit kat backup on a 5.1. lollipop system. So basically i would like to update to 5.1 but then I may want to revert back to 4.4.4 with the back up of recovery's 4.4.4 (which is stored on a memory card) Is it possible? Is there a root out for 5.1 yet? please help me if you can.
Click to expand...
Click to collapse
you can update to 5.1 but use a prerooted firmware with recovery included,don t flash official cause you will not be able to root it and install recovery.
i reverted between kit kat and lollipop many times myself,no prob.
as long as you have a recovery installed i don t thing you will have a problem.
of course make a back up,in case you want back.
now i noticed you post in the wrong section,should be moved in questions and answers
broky said:
you can update to 5.1 but use a prerooted firmware with recovery included,don t flash official cause you will not be able to root it and install recovery...
Click to expand...
Click to collapse
that´s wrong - you can root LP FW with that TOOL from our genius dev @munjeni.
You only had to unlock the bootloader.
Do I need a custom recovery for flashing the new 5.1.1 firmware? I mean do I need the specific XZ Dual Recovery or can I use the recovery which was installed automatically after rooting?
akos28 said:
Do I need a custom recovery for flashing the new 5.1.1 firmware? I mean do I need the specific XZ Dual Recovery or can I use the recovery which was installed automatically after rooting?
Click to expand...
Click to collapse
can you reboot in TWRP?if yes you can flash the firmware,prerooted zip of course.
broky said:
can you reboot in TWRP?if yes you can flash the firmware,prerooted zip of course.
Click to expand...
Click to collapse
What is TWRP please give me a clear answer. I AM noobie.
akos28 said:
What is TWRP please give me a clear answer. I AM noobie.
Click to expand...
Click to collapse
you say that you made a backup of 4.4.4,right?
you entered recovery so you did it either with TWRP or CWM.TWRP and CWM are both recoveries.
you can flash pre rooted firmware and restore backups with both of them,i just prefer better and suggest TWRP.
remember that if you want to restore your back up you need to do it with the same recovery you made it,i think that TWRP cant restore backups made with CWM and vice-versa.
anyway,you can easily find what backup you have if you find the folders named TWRP and CLOCKWORK or CWM in your external or internal storage,back up files is about 4gb size.
how to install now:
1.reboot your phone and when your led light blink press volume down key to enter TWRP recovery.if it gets you in CWM reboot again and when led blink press volume up,so you enter TWRP recovery.
2.now you are in TWRP you press WIPE on the top right box.then drug the slider at the bottom SWIPE TO FACTORY RESET
3.press back button annd shoose install
4.find your prerooted zip,on the top centre under SELECT ZIP TO INSTALL,is STORAGE internal or external sd card
5.install zip:good:
PS:make a fresh backup before you start
Thank you so much. Finally someone explained it normally.
Can someone give me a link where I can find pre rooted 5.1 Rom as a zip file for my Z1 compact? It would also be important to be central europe, unbranded or telekom. Thank you in advance!
You can do one yourself.
I don't have URLs till hands but those are easy to find on forum.
Here is the solution: http://techbeasts.com/2015/07/26/how-create-sony-xperia-pre-rooted-firmware-prf-creator/
Hi Currently I am having Honor 4c with Kitkat 4.4.2 (V100R001C636B160) version I wanted to Upgrade my android version to Marshmallow(CHM-U01C432B560) or any other custom ROM. I have unlocked my device bootloader and installed CWM recovery following the guide https://forum.xda-developers.com/honor-4c/development/honor-4c-root-cwm-recovery-inshaalmirza-t3177770 was able to install CWM but I wanted to install TWRP and followed the guide by @HassanMirza01 but wasnt success to install TWRP , if I am trying to flash Marshmallow ROM using CWM or by flashing IMG files using ADB I am not able to do it. Every Time I try to flash a ROM from CWM I am getting error and while flashing IMG files using ADB the screen is being struck at boot logo.Can anyone guide me how to replace CWM with TWRP so that I can Install Marshmallow (every time while I am trying to flash TWRP it is being struck at boot logo and had to flash stock ROM to recover the phone) and install marshmallow.
Note: Initially I upgraded to Lollipop as the version was not stable and Buggy I reverted to stock version using the official guide.
miststudent2011 said:
Hi Currently I am having Honor 4c with Kitkat 4.4.2 (V100R001C636B160) version I wanted to Upgrade my android version to Marshmallow(CHM-U01C432B560) or any other custom ROM. I have unlocked my device bootloader and installed CWM recovery following the guide https://forum.xda-developers.com/honor-4c/development/honor-4c-root-cwm-recovery-inshaalmirza-t3177770 was able to install CWM but I wanted to install TWRP and followed the guide by @HassanMirza01 but wasnt success to install TWRP , if I am trying to flash Marshmallow ROM using CWM or by flashing IMG files using ADB I am not able to do it. Every Time I try to flash a ROM from CWM I am getting error and while flashing IMG files using ADB the screen is being struck at boot logo.Can anyone guide me how to replace CWM with TWRP so that I can Install Marshmallow (every time while I am trying to flash TWRP it is being struck at boot logo and had to flash stock ROM to recover the phone) and install marshmallow.
Note: Initially I upgraded to Lollipop as the version was not stable and Buggy I reverted to stock version using the official guide.
Click to expand...
Click to collapse
You can try this TWRP https://forum.xda-developers.com/honor-4c/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495 or some version of TWRP for honor 4x or p8lite. And then you can try to flash stock firmare using this tutorial https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702. You might need to be in lollipop or marshmallow to use it.
Hi @keikari thanks for the reply, that is the case where I am facing the problem Neither I can install Twrp 3.0.1-0 (r1,2,3,4) variants nor lollipop or marshmallow update .I am struck with stock Rom tried more than 15 to 20 times . Can you provide any alternative solutions.
miststudent2011 said:
Hi @keikari thanks for the reply, that is the case where I am facing the problem Neither I can install Twrp 3.0.1-0 (r1,2,3,4) variants nor lollipop or marshmallow update .I am struck with stock Rom tried more than 15 to 20 times . Can you provide any alternative solutions.
Click to expand...
Click to collapse
What error did fastboot gave you when you tried to flash TWRP?
No error given but after flashing twrp device is struck at boot screen and can't move to next screen cwm flashing works fine .
Is it mandatory to have lollipop or marshmallow update to flash twrp?
miststudent2011 said:
No error given but after flashing twrp device is struck at boot screen and can't move to next screen cwm flashing works fine .
Is it mandatory to have lollipop or marshmallow update to flash twrp?
Click to expand...
Click to collapse
I don't know how things really work or why they need stuff to work. But in TWRP thread it says for android 5.1.1 - 6.0. So I guess it's important to have some of those versions.
Is there any other way to flash lollipop or marshmallow from cwm? I even extracted update.app and flashed recovery, system , boot images individually but it also doesn't work struck at boot screen. Can I fully wipe system files from phone and re-flash lollipop or marshmallow update. Similar to full format of a PC.
miststudent2011 said:
Is there any other way to flash lollipop or marshmallow from cwm? I even extracted update.app and flashed recovery, system , boot images individually but it also doesn't work struck at boot screen. Can I fully wipe system files from phone and re-flash lollipop or marshmallow update.
Click to expand...
Click to collapse
No idea will that work, but one thing that comes to mind is to flash those images you did and then put UPDATE.APP in your sd card in folder named dload and do force upgrade ( power + vol up + vol down ).
keikari said:
No idea will that work, but one thing that comes to mind is to flash those images you did and then put UPDATE.APP in your sd card in folder named dload and do force upgrade ( power + vol up + vol down ).
Click to expand...
Click to collapse
Tried that too but no success. I think the problem occurred while downgrading to kitkat from lollipop maybe it corrupted the boot system. Even that is the case while flashing and wiping cache so many times it might have showed error in any of the instances but it didn't. Can't find out what actually preventing system to update.
Hello,
I have got a problem to do anything with my tablet N8010. Some time ago I flashed custom ROM Lineage 14.1 (android 7.1) using custom recovery TWRP. Everything works fine except on some bugs in the ROM. These bugs convinced me to flash good old stock Kitkat ROM. But there is a problem. My USB port is somehow broken - I bless god that it charge battery at least but data communication is dead even when using different accessories. Problem is even worse because I managed to flash stock recovery over TWRP. If I recapitulate this, I cannot flash stock ROM over odin because USB data transfer does not work. I am stuck with stock recovery which allow me to flash only Samsung signed ZIPs.
The target is to either root Lineage ROM or get back custom recovery somehow.
What i have tried already:
LineageOS - addonsu-arm-signed.zip
This ZIP should be flashed through custom recovery to achieve ROOT access but thanks it is unusable unfortunately thanks of absence of Samsung's signature
All kind of ONE-CLICK-ROOT-APPS
Since i cannot root device through USB cable I have to use applications to try to reach root state. I have tried most common apps for this kind of purpose but non of these worked.
Ideas to solve this kind of problem
ADB-ROOT option in LineageOS
I can enable ADB-ROOT access in developers settings. I know there is a way of connecting to ADB via Wi-Fi. This I have tried already and I was successful.
Questions:
Will the Wi-Fi connection persist event when going to bootloader?
Is it possible to flash custom recovery at least from booted Android through ADB?
Is there any other way to flash or root recovery not from bootloader?
Use stock TAR.MD5 file
I managed to get all IMG files from stock firmware .md5 file but is it useful somehow? Can i just put them into ZIP archive and flash it through stock recovery or ADB-ROOT?
Prepare ZIP for stock RECOVERY
I would either need custom recovery ZIP (not IMG or tAR.MD5 file) to flash it through stock recovery or create / change / delete some attributes in ZIP file to be able to pass the signature verification of stock RECOVERY
This is my situation. External SD and Wi-Fi are only friend of mine in this situation and I am asking you kindly if I am stuck with ROM I have or if I have a chance to resolve the issue and flash stock ROM.
Thank you
Have a look and see if Mobile Odin or Flashfire work on this tablet .
JJEgan said:
Have a look and see if Mobile Odin or Flashfire work on this tablet .
Click to expand...
Click to collapse
Mobile odin works but i do not have rooted devive
Flash supersu zip .
JJEgan said:
Flash supersu zip .
Click to expand...
Click to collapse
Since i am stucked with stock recovery, the signature verifying fails. I does not work.
I have managed situation by following this article. Also, do not forget to type adb root before typing adb shell
https://blog.zauberstuhl.de/flash-your-recovery-image-via-adb-shell-on-android/