Database Info

Audio out

If i use the 3.5mm headphone breakout cable with headphones, i hear music fine, if i plug a 3.5mm lead that goes to my stereo, nothing is output, if i play with the 3.5mm jack, i can maybe hear music for a second before the music app closes and again no music is output except internal speaker.
Does anyone know the answer to this?

its something to do with the output resisitance. we need to change it. there was some development/research into this a while back.

(InsertNameHere) said:
If i use the 3.5mm headphone breakout cable with headphones, i hear music fine, if i plug a 3.5mm lead that goes to my stereo, nothing is output, if i play with the 3.5mm jack, i can maybe hear music for a second before the music app closes and again no music is output except internal speaker.
Does anyone know the answer to this?
Click to expand...
Click to collapse
The answers are a bit scattered across several threads, but if you have a look at Post #7 and onwards in this one is a good start. There are also some photos of made up leads showing how to address.
In essence Oly's comment is correct, but the nub of the issue comes down to the fact that the uUSB port is not just a hard-wired audio output in the manner of a traditional 3.5mm socket. The same contacts are used for multiple functions depending on the resistance presented to the sense contact. That causes the device to change mode and then channel data or audio or go into charging mode, etc.
I can't instantly give you all the links, but if you search on the TG forum for 'audio' and my username, you will find several further references. One in particular on Brighthand gives details about connecting an external hard drive successfully.
Hope that helps,
Regards,
Kevin

Audio Output to amplifier
Here
http://forum.xda-developers.com/showthread.php?t=936562&highlight=audio+output
and here, as kevinpwhite say, was the first thread facing this problem
http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/298887/headphone-amplified-sound-output/
Below, my own experience "tuning" a couple of PHILIPS portable amplified speakers to use with TG01 soldering a couple of 470 Ohm resistors:
1)between input left cable and ground cable
2)between input right cable and ground cable as well.
This doesn't affect to the sound at all and you can use any other sound source without problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and
Hope that helps you

I bought this samsung omnia adapter from ebay 6 months ago for 7pounds and is working fine even with an audio amplifier after pressing button. Is very good quality.

djtonka said:
I bought this samsung omnia adapter from ebay 6 months ago for 7pounds and is working fine even with an audio amplifier after pressing button. Is very good quality.
View attachment 574357
View attachment 574358
Click to expand...
Click to collapse
Can you link to the product?
thanks

Some of this looks like my but much cheeper...?
Microphone does not work anyway.
shop.ebay.co.uk/i.html?_nkw=Samsung+omnia+audio+adapter+&_trksid=p5197.c0.m627
Click to expand...
Click to collapse

djtonka said:
Some of this looks like my but much cheeper...?
Microphone does not work anyway.
Click to expand...
Click to collapse
I found it, its the official i8000 omnia ii headset

djtonka said:
I bought this samsung omnia adapter from ebay 6 months ago for 7pounds and is working fine even with an audio amplifier after pressing button. Is very good quality.
View attachment 574357
View attachment 574358
Click to expand...
Click to collapse
Thats the exact same one i have!!! Check out my post!! I got that from my local marketplace town for £7 which is kind of a rip off!

olyloh6696 said:
Thats the exact same one i have!!! Check out my post!! I got that from my local marketplace town for £7 which is kind of a rip off!
Click to expand...
Click to collapse
Good news!, and the 90º shape it's cool!! I wonder why the microphone doesn't work......

Pere said:
Good news!, and the 90º shape it's cool!! I wonder why the microphone doesn't work......
Click to expand...
Click to collapse
my microphone works
but the physical button to pick up phone calls does not work

[Q] Bluetooth case for iPad

From Thinkgeek here. Says it fits the OG iPad and with our TP's being roughly the same size do you think this would work? The cutouts seem rather generic on the case so I don't see controls being an issue. Only problem I do see is that the camera would be blocked, but it wouldn't matter to myself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yes the TP should fit into that ok.

Troute said:
Yes the TP should fit into that ok.
Click to expand...
Click to collapse
Thank you for someone actually replying.

You actually sent me off on a search for a keyboard/case myself but I managed to convince myself I really don't need it.

My boss has this for his iPad 2, and it even has the notch for the iPad 2 front camera. This morning I slipped my HP TouchPad in it, and it fit like a glove. Every button on the TouchPad was accessible: Power, Volume, headphone, bottom speakers, front camera, home button, and the unused card slot. I like it alot, but be sure to get the one for the iPad 2 since it has a hole/notch for the front camera. I like this, but it's too expensive. I'm looking for something cheaper.

This case (or one very similar) is being sold by Maplins in the UK.
I bought one and it fits and BT keyboard working fine.
http://www.maplin.co.uk/ipad-universal-black-leather-case-with-bluetooth-keyboard-509917
BTW The one I got has the cutout for the camera.

Just so guys know, this is on sale at thinkgeek.com for $29.99 for their Christmas special.

I just purchased this case and it will not pair with my Touchpad. It says "Unable to connect to keyboard (HID) profile" after entering the pairing code. I have tried resetting - the the keyboard connects to my iPhone without a problem. Any advice?

chuckhendo said:
I just purchased this case and it will not pair with my Touchpad. It says "Unable to connect to keyboard (HID) profile" after entering the pairing code. I have tried resetting - the the keyboard connects to my iPhone without a problem. Any advice?
Click to expand...
Click to collapse
Make sure you have bluetooth keyboard from the market installed.

Well, I was trying to pair it in WebOS. Is this not possible?

chuckhendo said:
Well, I was trying to pair it in WebOS. Is this not possible?
Click to expand...
Click to collapse
Ah I see. Sorry for being assumptive. I haven't paired in webos, but I'll give it a go and report back.

pa49 said:
Ah I see. Sorry for being assumptive. I haven't paired in webos, but I'll give it a go and report back.
Click to expand...
Click to collapse
Thanks! Interestingly enough - it lets me enter the code on the keyboard and also detects when I press enter (for the code). But then it errors out on the connection.

Figured it out.. thanks.

same problem
marcosowns said:
Figured it out.. thanks.
Click to expand...
Click to collapse
Do tell. I had it paired. Then I had it paired in android (xron's version of CM7) - and when I came back to WebOS, it pairs, but then gives the same error (unable to connect to keyboard (HID) profile).
I tried deleting the pairing and re-pairing from scratch - but it continues to give the same error.
What did you 'figure out'?!

Yackley said:
Do tell. I had it paired. Then I had it paired in android (xron's version of CM7) - and when I came back to WebOS, it pairs, but then gives the same error (unable to connect to keyboard (HID) profile).
I tried deleting the pairing and re-pairing from scratch - but it continues to give the same error.
What did you 'figure out'?!
Click to expand...
Click to collapse
Anyone? I'm still having issues as well
UPDATE: I finally got it working by having it start the pairing process, then holding the "Connect" button on the keyboard while it was trying to pair. After doing this a few times, it finally connected. However, it seems that it constantly disconnects. Pressing keys on the keyboard reconnects it, but there is a lag. This is very frustrating - any advice?

I just got this in the mail today but can't find the pairing code. Can anybody point me to what the code is or where it is hidden?
Sent from my HP Touchpad using Tapatalk.

calash said:
I just got this in the mail today but can't find the pairing code. Can anybody point me to what the code is or where it is hidden?
Sent from my HP Touchpad using Tapatalk.
Click to expand...
Click to collapse
What you'll want to do is enter ANY code on the Touchpad. After you press the button to confirm the code, immediately type the same code on the bluetooth keyboard and press enter
I've pretty much given up on it - constantly disconnects. Big pain in the arse

That did it, thank you.
Oddly the device shows as disconnected in Android but Bluetooth Keyboard has it connected and working for the moment. I will play around with. It and see what happens.
Thanks again
Sent from my HP Touchpad using Tapatalk.

Car launcher A2DP icon in home screen not working

I just installed Car launcher because layout looked pretty good.
However, I ran into a issue.
I use A2DP often to listen music on my phone. So, I placed A2DP icon in home screen.
However, with car launcher, it just opens Bluetooth phone instead of A2DP. A2DP opens fine in app drawer and even shows icon with bluetooth headphone. However, when I place this icon in home screen, the icon changes to regular bluetooth icon, while the name stays A2DP.
I believe this is due to the fact A2DP and bluetooth actually is a same app with different options.
Anyone know how to get this working?

lambition said:
I just installed Car launcher because layout looked pretty good.
However, I ran into a issue.
I use A2DP often to listen music on my phone. So, I placed A2DP icon in home screen.
However, with car launcher, it just opens Bluetooth phone instead of A2DP. A2DP opens fine in app drawer and even shows icon with bluetooth headphone. However, when I place this icon in home screen, the icon changes to regular bluetooth icon, while the name stays A2DP.
I believe this is due to the fact A2DP and bluetooth actually is a same app with different options.
Anyone know how to get this working?
Click to expand...
Click to collapse
Bump.
I am also looking for a answer on how to resolve this.
Any help would be appreciated
Launcher: Google play link
Can't seem to locate the A2DP apk
Firmware: MTCD_GS_V1.93_1

I have the same issue with the launcher, I already sent an email to the developer.
[email protected] https://plus.google.com/100724277291367457813 no answer yet.
Maybe you can try to email him too.

Also have this issue. I found a work around though...
Using tasker, I made the Ad2p app launch whenever I launch the "Bluetooth" app. It works well by just opening the correct app after the bluetooth app opens.
Of course you loose access to the Bluetooth app.

lambition said:
I just installed Car launcher because layout looked pretty good.
However, I ran into a issue.
I use A2DP often to listen music on my phone. So, I placed A2DP icon in home screen.
However, with car launcher, it just opens Bluetooth phone instead of A2DP. A2DP opens fine in app drawer and even shows icon with bluetooth headphone. However, when I place this icon in home screen, the icon changes to regular bluetooth icon, while the name stays A2DP.
I believe this is due to the fact A2DP and bluetooth actually is a same app with different options.
Anyone know how to get this working?
Click to expand...
Click to collapse
I have the same issue using Car Launcher Pro. I like listening audiobooks. I do it at work, than continue in the car on the way home. All symptoms are exactly as yours. I was going to contact the author and then saw this tread.
What if each of us contacted the author and explained the issue?
Also, what if we rate the app with one star down for this issue and explain why we gave less stars publicly? I've just done it.

i think this happens with any ROM other than the default Joying ROM, like if you use Nova i think it goes away as well, at least on the Intel units
---------- Post added at 10:08 PM ---------- Previous post was at 09:28 PM ----------
well this thread says there is a workaround:
https://forum.xda-developers.com/an...s/bluetooth-music-apk-file-joying-jy-t3537770

Good news, it works,I used Smart Launcher Pro for these pics, but the same works for Nova, I tried it on both
Smart Launcher Pro is a little different, you have to "add an icon" to add an app to the homepage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose shortcut
At this point it is roughly the same as picking a widget in Nova, choose Activities
Then look for Bluetooth
Then you can expand it and pick Bluetooth Music
And you can see it appears on the homepage and will open the Bluetooth Music app

Hello,
The guide does not work. The point Activities is missing.Is there another solution maybe?
Greetings Martin

Does not anyone know or does not want to help?

The smoothest solution
p10driver said:
Does not anyone know or does not want to help?
Click to expand...
Click to collapse
1. Install Tasker and Tasker App Factory on your Android Head Unit.
https://www.xda-developers.com/tasker-v4-9-is-out-with-non-root-programmable-firewall-multi-window-automation-s-pen-recognition-and-more/
2. Open Tasker and in the "Tasks"-section open a new task by clicking the plus sign. Give it a name.
3. In the next window click on plus sign again and choose "App" as action category. Then choose "Launch App" as your action. In "App Selection" choose your A2DP app.
4. Hit the back button to get to the "Task Edit" window. Click on the square at the bottom and choose an icon. Then hit the back button again.
5. You should be back in the main window an see your task. Long press it and click on the three dots in the upper right corner. Choose "Export" and in the next dialogue "As App". Let it export and Auto-Install.
6. Now you can use your new app for A2DP in any launcher.
Optional: If you want you can uninstall Tasker again. It isn't necceserily needed anymore.
Let me know if it works for you and have a great time

Phone icon with three circular lines in status bar "like extra volume icon"

Hello
I.ve noticed one icon poped up in the status bar of my s7 and i don.t know how to remove it
Looks like a phone with three circular lines
It.s exactly like the "extra volume button" that appears during a call i checked settinga and can.t seems to.find anything...the only time it dissapears is when i enter the call.divert and call barring settings
And then it shows up again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Same problem here.

masster64 said:
Same problem here.
Click to expand...
Click to collapse
looks like Speakerphone is on?

Just made a call with speakerphone on and the icon didn't appear and the normal call icon didn't change either, but could be different for different CSC

*Detection* said:
Just made a call with speakerphone on and the icon didn't appear and the normal call icon didn't change either, but could be different for different CSC
Click to expand...
Click to collapse
mine either, you may be right
I also found this threads....i think it confirms that the icon is for speakerphone on
Not the right phone but
https://forums.androidcentral.com/google-pixel-pixel-xl/746114-status-bar-icon.html
It mention a Bluetooth connecting to car issue worth checking
and this other for the S6, check last last post
https://forum.xda-developers.com/galaxy-s6/help/speakerphone-making-to-answering-call-t3095847

MAX 404 said:
mine either, you may be right
I also found this threads....i think it confirms that the icon is for speakerphone on
Not the right phone but
https://forums.androidcentral.com/google-pixel-pixel-xl/746114-status-bar-icon.html
It mention a Bluetooth connecting to car issue worth checking
and this other for the S6, check last last post
https://forum.xda-developers.com/galaxy-s6/help/speakerphone-making-to-answering-call-t3095847
Click to expand...
Click to collapse
Yea the BT thing sounds plausible, guess it would think it was on loud speaker if connected to a car BT sound system
There's a few different unknown icons appear here on XDA, not sure where the box my S7 came in but possible there is a booklet similar to your first link showing what they mean

*Detection* said:
Yea the BT thing sounds plausible, guess it would think it was on loud speaker if connected to a car BT sound system
There's a few different unknown icons appear here on XDA, not sure where the box my S7 came in but possible there is a booklet similar to your first link showing what they mean
Click to expand...
Click to collapse
Not with mine , no booklet at all , if you search S7 status bar icons , there are several variants ( shapes, colors) for the same function , I guess each country /carrier adds their touch....that is not bad but for sure sometime confusing

That is the WiFi calling icon. It can be turned off in phone settings
sent from my SM-G930W8 using Tapatalk

bill_in_mtl said:
That is the WiFi calling icon. It can be turned off in phone settings
sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
Mystery solved, enabled WiFi calling through my carriers app but apparently it's only on their branded S7s atm, for unbranded we have to wait

bill_in_mtl said:
That is the WiFi calling icon. It can be turned off in phone settings
sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
*Detection* said:
Mystery solved, enabled WiFi calling through my carriers app but apparently it's only on their branded S7s atm, for unbranded we have to wait
Click to expand...
Click to collapse
I do not have that option over here.....good to know

Actually, it's the 4G call icon. You shoul disable it, if you want to be albe to make proper calls.

Wi-Fi calling icon
It's your Wi-Fi calling icon. Just pull the top bar down and turn off Wi-Fi calling! I only found out by accident as it was driving me nuts!

Charge battery notification & Sound

Hi everyone, my OnePlus7Pro suffers from the lack of an audible warning when charging and when it is removed from the charge when the phone is " on " it has no message or sound when the battery is 100% charged. For this I have created a simple Apk with tasker to install without root permissions on all OnePlus7Pro that solve this lack. It should work even when the screen is off . If you want to try it, you are free to do so. There is a button in the menu to disable the popup service and the sound but the notification is always running to work. The only permission to give is "storage". Tell me if it consumes a lot of battery and is worth keeping it installed.My goal is to "share" this simple solution with some users who know no solutions .. Consider it a test for now.
Updating 14/07/2019 :
Try this new version. I changed the skin of the popup. I added the vibration . I added the button to activate only the acoustic notification without the popup but only when it is charged and removed from the charge.
Updating new version Full 1.0 / Full.57.apk
18/07/2019
This is a much more complete version. The recharge sound is present when the power is turned on and when it comes off. There is popup, sound, I added the LEDs to the screen off. I added the possibility of using the desired profile on 4 different profiles, the possibility of disabling all the LEDs and all the profiles in case you don't want to use anything. Other little things you need to try on the menu. If you don't use the navigation bar it will be seen in full screen. Tell me if everything works, in the other case I will try to fix it.
* 11/08/2019 *
New version: full.68.apk
"most stable version"
Installation :
Give access to memory as usual and "allow change system settings"
Redesigned smaller LEDs, battery icons with percentages (I think it's more tasty to the eye). In PROFILE 4 Every 25% of charge there will be the display of the battery and an acoustic signal "red 25%, Orange 50%, Yellow 75% and Green from 75 to 100% . Now the screen does not turn off when it is added to the AC recharge. The suspension of the screen will increase the duration to allow the application to work well otherwise the LEDs and icons will be disabled, then everything will return to normal as soon as you remove the AC charge. Now there is a button to prevent the LEDs from being seen in the dark if you have enabled automatic brightness. When profile 4 is running you can activate the screen with a touch on the display. On the menu I tried to give as many explanations as possible and excuse my English if it's not good.
I'm glad to hear from you if you liked it and everything works well. As I said before I can solve if you point out the bugs.

Hi
Amazing idea and indeed it's usefull, I'll test it and let you know.

Hello, thanks for sharing! Do you mind sharing the profile itself?
A few weeks ago I tried doing the same but I was stuck with Tasker not vibrating when the phone is in silent mode.

From what I've heard Oneplus will "fix" this in next updates.

khalisz said:
Hi
Amazing idea and indeed it's usefull, I'll test it and let you know.
Click to expand...
Click to collapse
Thanks, try the second version and tell me if it all works

neohq said:
From what I've heard Oneplus will "fix" this in next updates.
Click to expand...
Click to collapse
I did not know this . If so, better for us ..

From Oneplus forum.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GM1913 using Tapatalk

brwolfgang01 said:
Hello, thanks for sharing! Do you mind sharing the profile itself?
A few weeks ago I tried doing the same but I was stuck with Tasker not vibrating when the phone is in silent mode.
Click to expand...
Click to collapse
It should vibrate the same even with silent. Perhaps in the next version I will add vibration when removing the USB cable from the power supply and when the popup will appear. Contact me in private because this is an apk, it's not a Tasker discussion.

neohq said:
From Oneplus forum.View attachment 4792189
Sent from my GM1913 using Tapatalk
Click to expand...
Click to collapse
Yes, I saw . I'm happy for this. In the meantime you can install my apk (the second one) tell me if it all works I changed something but I didn't have the chance to load 100% and test everything. Let me know how it goes

bettuccio said:
Thanks, try the second version and tell me if it all works
Click to expand...
Click to collapse
Hello
I've just rooted my phone and restored all my data. for I'm going to install it right now

khalisz said:
Hello
I've just rooted my phone and restored all my data. for I'm going to install it right now
Click to expand...
Click to collapse
I'm doing another much more complete version. There will also be the LED, the LEDs based on the percentage of the charge and vibrations when the power is disconnected and attached. There will be 4 profiles to choose from.

Added Full version on the before page. Try it ?

Okay :good:

New most stable designed version loaded in 1st page.

terrible small text