I have a Fujitsu P1120 touchscreen netbook. I have been trying to dual boot android with the windows xp that is on there but have had no success. I cannot seem to figure out the right way to put android on the hard drive. It keeps coming up with a grub error for invalid filesystem. I have downloaded liveandroid, android 86x. The main problem that I have is that my device doesn't support booting from usb, booting from network, or any usb external drive. So the only way I can get it to work is to manually install android but I don't know how to do that.
Can anyone help me with this please?
i have same problem , i want to install android on fujitsu p1120, but i see installation freezed, now i want to test froyo android
monedadeoro said:
i have same problem , i want to install android on fujitsu p1120, but i see installation freezed, now i want to test froyo android
Click to expand...
Click to collapse
i have tried everything that I can think of besides, network installation. I can't figure out how to set up the server to do it.
How version android x86 work in lifebook p1120?
The touch screen work in android?
I see the information about touch....
http :// ariescomputing .com/lifebook/
I so happy now.. i found one dvd-rw usb work very fast in the my fujitsu...
Is liteOn Slim USB (have 2 usb) dvd-rw and the bios work..
To put it bluntly you're trying to get your netbooks to do something it isn't intended to do. Those thing are built with the absolute bare minimum to do pretty much nothing more than browse the web, hence "netbook". It's not a full PC. Even the newer ones don't run a full version of Windows 7. Short of knowing how to re-write a BIOS image or finding a modified one and flashing it, which has the risk of perma-bricking your computer.
Волк,
Sorry my bad english..I have a good computer, phone and tablet. However I like to modify my old electronics giving new life to them .... Now for example I'll replace the HDD Fujitsu Lifebook P1120 IDE for SSD and I'll put a PCMCIA card with internal memory to speed up Windows. I installed windows 7 and it is working. So I had to make a modification in winsetup.dll to install.
At the moment I install Android but I am having difficulties.
I recently got an Acer Liquid M220 as a backup phone. It has Windows Phone 8.1 OS on it. There is a similar device that has Android 5.0 on it, the Acer Liquid Z220. Both share the same hardware specs. If the Z220 can run Android then perhaps the M220 can run it too.
Is it possible to remove the Windows Phone OS and replace it with the Android Firmware?
The Acer Liquid M220 is based on Qualcomm Snapdragon 200 MSM8210 chipset what understands ARMv7-A ( 32-bit ) instructions set. Hence 32-bit Android should run.
jwoegerbauer said:
The Acer Liquid M220 is based on Qualcomm Snapdragon 200 MSM8210 chipset what understands ARMv7-A ( 32-bit ) instructions set. Hence 32-bit Android should run.
Click to expand...
Click to collapse
Thanks for the response.
Yes, the hardware is the same so it should be possible to run Android on it. I just don't how the Z220 is partitioned for Android. I don't how to add a bootloader or if Windows Phone bootloader will work with ADB. So the 2 questions I should be asking are:
1. How do I partition the M220 for Android?, and
2. How do I add the Android bootloader to the M220?
Can't give you helpful answers: I've never tried to replace a phone's Windows Mobile OS by Android OS.
jwoegerbauer said:
Can't give you helpful answers: I've never tried to replace a phone's Windows Mobile OS by Android OS.
Click to expand...
Click to collapse
Thanks. I have decided to just use the phone as a feature phone.
Hello,
Hopefully can find further help here...
Obtained Keypoon K30s Pro tablet from China. It is running Android 10 as its oem OS. I want to set it up with a linux distro instead of android.
Ofcourse due to exotic make I have not been able to find any threads of information on this topic for this brand tablets.
Only guide so far has been hardware specs...
It is running on Unisoc SC9863a 64bit ARM Cortex A-55 cpu at 10 cores.
10GB RAM
512GB internal storage
PowerVR Rogue GE8322 integrated graphics card
It successfully connects with windows 10 cmd adb bridge.
As I understand, I would need a linux distro img format file to try and boot it from bootloader via ADB, however official sources only offer ISO downloads.
PS I am open to any linux distro which would offer best compatibility to the hardware. From what I can see Debian seems to be a good choice. (as this brand is not
part of the supported device list for ubports of ubuntu touch couldnt get past that either)
Any advice would be greatly appreciated
Thank you
Try this
Andronix - Linux on Android – Apps on Google Play
Andronix lets you install Linux on Android without root.
play.google.com
jwoegerbauer said:
Try this
Andronix - Linux on Android – Apps on Google Play
Andronix lets you install Linux on Android without root.
play.google.com
Click to expand...
Click to collapse
Thank you for reply.
Looks like Andronix is a Linux emulator and backbone still remains Android.
with this also comes certain limitations...
I was looking to completely replace Android with a Linux distro.
Any suggestions?
Android IS Linux tailored to the mobile's hardware
jwoegerbauer said:
Android IS Linux tailored to the mobile's hardware
Click to expand...
Click to collapse
Yes, you are correct there. Andoid is built off the linux kernel.
However, it is still limited in what you can do, you have proprietary bloatware bogging down your device and the biggest issue for me is that google is the manager of it all.
So I am strongly coming from privacy side as well.
I have seen quite a few options similar to Andronix on play store. Correct me if im wrong- they are like a virtual machine on windows..? Not sure how this setup works, if you are able to save your OS state, packages etc, or its a clean slate everytime you fire up the vnc server and connect to the distro of choice...
So I am really interested to see if its possible to fully get rid of android and try linux. (Cant install windows as ARM cpu's are not supported, not that I wanted windows anyway)
Many thanks
Hello and thank you in advance,
I have to android box running android 10. Is it possible to install windows on a box and make it a mini pc. my goal is to have it installed in my car and use it in my car audio set up.
Look inside here:
Here's how to install Windows on Android tablets
You can't directly install Windows on an Android tablet, but you can certainly use it on one. Here's how to use Windows on an Android tablet.
www.androidauthority.com
jwoegerbauer said:
Look inside here:
Here's how to install Windows on Android tablets
You can't directly install Windows on an Android tablet, but you can certainly use it on one. Here's how to use Windows on an Android tablet.
www.androidauthority.com
Click to expand...
Click to collapse
thank you i look now
Hi all! Android noob looking for suggestions.
Manufacturer: Mediawave PC (now Techland PC)
Hardware Model: MW22-A32
Current OS: 4.4.4
Chipset: Rockchip RK3288 (supposedly capable of Android 8.1)
Rooted with SuperSU
Purchased this 22" touch display off eBay and wanted to load an app that requires Android 6 or higher. The manufacturer does not offer an update package for this device and indicated what I have was a special build for a single project that is now likely being refreshed and hardware liquidated. Tech Support indicated I needed to simply buy a NEW device that already has the OS updated.
I would like to think we can update to a newer version of OS, but I have no idea where to start. I checked a few online videos, but they seemed to point to pre-packaged OS bundles from tech enthusiasts for specific mass market tablet models.
Is an upgrade like this possible without having device specific files/firmware? If so, can you point me to a guide or walkthrough for how to do this as an Android novice? Thank you!
In order to upgrade existing Android OS as 1st thing of all things you need to find a
1. Custom Recovery
2. Custom ROM
both suitable to the mentioned device.
jwoegerbauer said:
In order to upgrade existing Android OS as 1st thing of all things you need to find a
1. Custom Recovery
2. Custom ROM
both suitable to the mentioned device.
Click to expand...
Click to collapse
Can I create a recovery from the existing image? Is there a utility that will export that?
Look inside here:
[DEV]How to compile TWRP touch recovery
All of TWRP 3.x source is public. You can compile it on your own. This guide isn't going to be a step-by-step, word-for-word type of guide. If you're not familiar with basic Linux commands and/or building in AOSP then you probably won't be...
forum.xda-developers.com
jwoegerbauer said:
Look inside here:
[DEV]How to compile TWRP touch recovery
All of TWRP 3.x source is public. You can compile it on your own. This guide isn't going to be a step-by-step, word-for-word type of guide. If you're not familiar with basic Linux commands and/or building in AOSP then you probably won't be...
forum.xda-developers.com
Click to expand...
Click to collapse
Using the 'Official TWRP App', I created a copy of both the boot and recovery image.
For the next step, if the device manufacturer will not supply an updated ROM, can you use the hardware profile help find a close custom rom that may work here? if so, do you have any suggestions on next steps? I installed the 'Droid Info' app to view hardware info, but it was not as detailed as I had hoped.
Can't answer your questions because I never compiled TWRP at my own.
Were you ever able to update this device? I have one that i want to update as well.
I also bought one of these off of ebay and would like to know if you figure out how to upgrade to Android 8.1.
$175 - https://www.ebay.com/itm/304190850043
Sellers other items:
Jjsurplus1090 Reviews - eBay Store Seller Profile
Jjsurplus1090 is a seller on eBay and has received feedback from more than one thousand consumers and has a positive feedback rate of 98.8%.
www.findthisbest.com
$998? - https://www.neweggbusiness.com/product/product.aspx?item=9siv2hu9829613
Manufacturer Contact Info: http://techlandpc.com - 510-490-6768 - [email protected]
MediaWave PC
MediaWave PC. 52 likes. Embedded And Digital Signage Hardware Specialist
www.facebook.com
MW22-A32 | Techland PC
http://techland.webandapp.design/wp-content/uploads/2017/09/MW22-A32.pdf
Side question: Does anyone know if there is a webcam or camera that will work with this device?
https://datasheet.lcsc.com/szlcsc/Rockchip-RK3288_C191247.pdf
Rockchip RK3288 model number AIO MW22-A32
I sent an email to [email protected] and will report back once I get a response:
I purchased one of these recently and the OS is Android 4.4.4
Do you know where I can download the ROM, Recovery image file?
I believe that I saw that your website stated the OS to be Android 7.1.
Is it supposedly capable of Android 8.1?
<and thank you very much>
Yet another question...
The unit I purchased seems to have only 1GB DRAM?!?
Any way to increase this? Any advice is greatly appreciated!
2015 Rockchip Light Biz OS for Android Laptops/Desktops, UI for productivity on RK3288 and RK3368
Download and Install Lineage OS 17.1(Android 10) for Google Rockchip RK3288
How To Install Lineage OS 17.1 - Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets - TweakDroid
Complete Guide [With Download Link] to Install Lineage OS 17.1 In Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets. Let's Customize Your Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets With Latest Lineage OS 17.1.
tweakdroid.com
Custom ROMs For Google Rockchip RK3288
List of Custom ROMs for Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets - Download & Install Guide - TweakDroid
Here is the available Custom ROMs list for your Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets & Custom ROM Installation Guide for Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets.
tweakdroid.com
Flash ChromeOS Rockchip RK3288?
How to flash firmware to Rockchip devices in Windows and Linux (2021 Edition)
How to flash firmware to Rockchip devices in Windows and Linux (2021 Edition) - CNX Software
We've written several articles detailing methods to flash firmware to Rockchip devices in Windows or Linux over the years, with tools like RKAndroidTool,
www.cnx-software.com
I called 510-979-8822, asked for customer support, left a voicemail
I reached out via LinkedIN - https://www.linkedin.com/in/brian-goduco-240ab47/
I also sent an email to [email protected] and [email protected]
It looks like their facebook page is dead or gone. This tweet is supposedly a link to one of their device photos:
https://twitter.com/i/web/status/11045078102Their twitter page has not been active since they first joined in March 2010 - https://twitter.com/techlandpc
Firmware Upgrade Guide For RK3188 RK3288 RK3368 Devices
UPD: Rreflashing guide for linux Host PC added. BEFORE START What you need: 1. Image file 2. Host PC (Windows) 3. USB OTG Cable Supported host OS: 1. Windows XP （32/64bit) 2. Windows 7 (32/64bit) 3. Windows 8 (32/64bit) All manipulations I...
forum.xda-developers.com
donclark said:
Firmware Upgrade Guide For RK3188 RK3288 RK3368 Devices
UPD: Rreflashing guide for linux Host PC added. BEFORE START What you need: 1. Image file 2. Host PC (Windows) 3. USB OTG Cable Supported host OS: 1. Windows XP （32/64bit) 2. Windows 7 (32/64bit) 3. Windows 8 (32/64bit) All manipulations I...
forum.xda-developers.com
Click to expand...
Click to collapse
Don - were you successful?
TXdev said:
Don - were you successful?
Click to expand...
Click to collapse
I did not attempt. TechlandPC did respond and said that this model maxed out at 4.4.4. I was not convinced that the updated firmware will work with this device and could not find anyone specifically doing it to this device - and did not want to brick it. I was able to delete some large system apps and free up some space with OAndBackupX (Andorid 4+)- https://f-droid.org/en/packages/dk.jens.backup/
Interested in this aswell.
I know the topic is a few months old but I’m currently looking at possibly purchasing the 22” or 15” in models and wanted to see if there were any further updates? What is everyone using them for? I hope to use them with home assistant and fully kiosk…anyone know if it’s possible? Seems like there is enough interest, maybe we can get this tablet upgraded?
Crazyshakespeare15 said:
I know the topic is a few months old but I’m currently looking at possibly purchasing the 22” or 15” in models and wanted to see if there were any further updates? What is everyone using them for? I hope to use them with home assistant and fully kiosk…anyone know if it’s possible? Seems like there is enough interest, maybe we can get this tablet upgraded?
Click to expand...
Click to collapse
I purchased the 22" for my 83yr mother. I created a desktop stand for her to use it to view her gmail, facebook, etc. Its fairly limited because of the small space on the device, So I found a way to move many of the apps to an external usb. It also does not have a camera - which would have been nice for her to be able to use to make videochats, but I could not get an external usb camera to work (tried 4 different makes/models). I never did attempt to flash and upgrade it.
Oh wow Don…good on you for getting your grandmother up and going with it. I’m a little scared to take the plunge not knowing if it can run what I need…how good is the browser (is the system sluggish?) They two I’m looking at say they have built in cameras (I too was hoping to use it) but I bet it will be a no go :/
Crazyshakespeare15 said:
Oh wow Don…good on you for getting your grandmother up and going with it. I’m a little scared to take the plunge not knowing if it can run what I need…how good is the browser (is the system sluggish?) They two I’m looking at say they have built in cameras (I too was hoping to use it) but I bet it will be a no go :/
Click to expand...
Click to collapse
If it says in the description that it comes with a camera - you may be ok. Mine clearly stated that it did not have a camera.
It is responsive and works well. I did do something to make it sluggish but I do not remember specifically... it may have been that I came very close to maxing out the storage which caused the issue.
The other thing that I was really disappointed in is that it does not have an HDMI in. So I could not push video to it. It does have an HDMI port, but I havent tested if it does push video to another device since I didnt have a need to do that.
It’s good to hear it’s responsive (or was lol) maybe I should just bite the bullet and get it…if I can just get it to run Home assistant it will be golden…if you think of anything else or figure anything out let me know!