Guys, i need case for my Note 4 with the official wireless backcover. It is mich bigger then the stock one and now it doesnt fit in my spigen case :-/ someone who found a case maybe? I have to use a "socks" like one. Thanks a lot guys and sorry for my Englisch
iblason armorbox works great with the oem qi cover.
Does this case scratch the metal chrome chamfered edges of the Note 4?
zurkx said:
iblason armorbox works great with the oem qi cover.
Click to expand...
Click to collapse
no it does not.
perfect fit with the qi cover. search for the iblason armorbox in the forum to see my pictures of it on the phone.
zurkx said:
no it does not.
perfect fit with the qi cover. search for the iblason armorbox in the forum to see my pictures of it on the phone.
Click to expand...
Click to collapse
It is like otterbox or? I need sonething like bumper with Finger print function and spen.
mag2007 said:
It is like otterbox or? I need sonething like bumper with Finger print function and spen.
Click to expand...
Click to collapse
spen works great.
here it is :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How hard is it to disassemble the case once in a while?
pretty hard. its a put on once and dont remove thing.
water/dust/mud resistant + wireless charging so i dont need to remove it anyway. just put some water on the front and rub it with a tissue to clean.
Supposedly the Diztronic case for the Note 4 works with the wireless back. Here's a Amazon review.
sheltem said:
Supposedly the Diztronic case for the Note 4 works with the wireless back. Here's a Amazon review.
Click to expand...
Click to collapse
I'd take that with a grain of salt. I have the OEM Qi back, and I have that same Diztronic case but I've found that while it does fit (just barely), the buttons get extremely sensitive. And by sensitive, I mean the slightest touch will press the button, or depending on how you try to stretch the case out, just activate the button constantly. Maybe with some heat from a heatgun or a hairdryer you could get it to seat better but I didn't want to expose my phone to any unnecessary heat. Maybe it's just the case that I got so as always, YMMV.
Did you already buy the OEM cover? Why don't you spend less money on an aftermarket adapter that fits under the stock cover?
Sent from my SM-N910V using Tapatalk
I bought one of those for the S4 and could not get it to work.
Related
So I bought the Poetic case first and while I like it I need the holster for work. I refuse to put my nice phone in my pocket with the screen rubbing my leg.
The Seidio is a nice case but its rubber and not strong enough. So I took the outer piece from the Seidio and the Poetic bumper and snapped them together. Fits like it was made for it. Holster works great. Before you couldn't "snap" the phone into the holster because of the flemsy rubber but with this you can. Makes it much easier to attach the phone when the holster is on your belt.
Thought I'd share. Good cheap option for current Seidio Active case owners.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plan to get a piece of rubber the same thickness as the gap between the Seidio piece and the back of the phone.
This is pretty damn good tough protection for a delicate device. I love it.
Sent from my Nexus 4 using Tapatalk 2
Hey, you're using the holster I sold you wrong .
Nice combo! I never would have put those together, very well done modding lol.
Thanks for the holster!
Sent from my Nexus 4 using Tapatalk 2
Looks pretty good! Personally, I don't like carrying my phone on my belt, the only person I know who does that is my father!
I have a Gadgetshieldz screen protector (which I wouldn't really recommend) and a dbrand skin (love it), and a microfiber pouch from EverySewOften (bought one because I really loved my Nexus One neoprene pouch, this one is good too), so I keep my phone in my pocket.
Question: Does NFC still work with the case? I ask because my dad's SGS3 with a hard cover case refuses to read NTAG203 NFC tags.
Cheers
quicksand10 said:
Looks pretty good! Personally, I don't like carrying my phone on my belt, the only person I know who does that is my father!
I have a Gadgetshieldz screen protector (which I wouldn't really recommend) and a dbrand skin (love it), and a microfiber pouch from EverySewOften (bought one because I really loved my Nexus One neoprene pouch, this one is good too), so I keep my phone in my pocket.
Question: Does NFC still work with the case? I ask because my dad's SGS3 with a hard cover case refuses to read NTAG203 NFC tags.
Cheers
Click to expand...
Click to collapse
I'm sure it does. I don't have NFC installed because I never use it.
Sent from my Nexus 4 using Tapatalk 2
Heres a few pics of the note 4 with samsung qi back and the iblason armorbox. phone charges great thru the back with no issues. its dusty and ive dropped it twice using it in a machine shop and the phone is undamaged/unscratched. looks brand new if you remove it from the case.
finger print reader is disabled due to front plastic but nfc/cam/rear spo2 sensors all work ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's funny because this is the only case that actually fits the Note 4 with the modified back cover to accommodate the wireless charging feature. I'm returning my wireless cover to Samsung; there's no point to constantly remove and re-fit my Otterbox Defender when wirelessly charging. If only if samsung employed better design specialists. The cover warms up your device considerably according to other reviewers for the wireless back cover Made by Samsung. Add a case on top, there goes a meltdown. .
It's good to know though, that the i-Blason case fits well. Initial reviews of this case seemed to be fake, so I resorted back to Otterbox. I bet you that iBlason's suppliers are the same employees making cases for Otterbox, haha. I knew I should have purchased the i-Blason case. Cheers!
zurkx said:
Heres a few pics of the note 4 with samsung qi back and the iblason armorbox. phone charges great thru the back with no issues. its dusty and ive dropped it twice using it in a machine shop and the phone is undamaged/unscratched. looks brand new if you remove it from the case.
finger print reader is disabled due to front plastic but nfc/cam/rear spo2 sensors all work ok
Click to expand...
Click to collapse
mine stays at a reasonable temp with the samsung qi back and the armorbox. never seen it heat up significantly. it gets a little warm but not excessive.
I think it depends on the charger. When on my nexus charger, it stays cool. On one of those cheap charging pucks it heats up quickly.
Yup, I finally found a case that fits the Note 4 with OEM Qi back. It is not difficult to put on or remove.
I have tried the Spigen Tough Armor and Slim armor, I even tried to cut part of the Tough Armor, but the Verus Thor has the best fit.
Wireless charging works perfect with all my Qi plates, well they are all Nokia DT900
I am really happy now...
This is what i did with my Spigen Tough Armor to make it fit, but still did not fit nicely. One postitive thing though with this mod, is the sound went a little bassy because there was a hollow space left under the outer plastic from the cutout. And when you cover the main speaker grill, the sound is redirected to the hole where the sensor is.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried it myself, and while it does fit tightly, my problem was that the screen lip basically disappears; so if I dropped it, I'd probably be smashing my screen. Ended up pulling the QI receiver out of the wireless back, slapped that on naked, put the stock back on, and my Verus fits perfectly again. A little bit of hard labor, but it was worth it so my Verus would fit right.
Sokudoningyou said:
I tried it myself, and while it does fit tightly, my problem was that the screen lip basically disappears; so if I dropped it, I'd probably be smashing my screen. Ended up pulling the QI receiver out of the wireless back, slapped that on naked, put the stock back on, and my Verus fits perfectly again. A little bit of hard labor, but it was worth it so my Verus would fit right.
Click to expand...
Click to collapse
Mine still has some LIP left, and they still lift the screen when putting the phone face down on a flat surface. I can also test this by putting the phone on it's back, then putting a ruler on top of the "lips" of the verus case. I can see light passing thru, and it is better than on my Note 4 without the Qi charger, with my Spigen Slim Armor or Neo Hybrid.
======
Edit:
I have done tests in the past, that when you drop a phone, it almost always reaches the ground on one of it's corners first. I never encountered a "flat" on the screen drop. And I think this verus case is a good compromise. Hopefully someone will make a "real" case for our Qi back covers.
Has anyone used these before? Product description says that it doesn't affect signal, but from memory apparently it does for other phones.
Just wanted to check other people's experiences on this type of case. Looking at these two at the moment.
Also would this fit nicely with a tempered glass screen protector?
Aluminium bumper with tempered glass back
Aluminium bumper with acrylic back
(note I had to remove links as I cannot post it yet, but you can find them on aliexpress quite easily.
http://www.aliexpress.com/item/Redm...hweb201527_3_71_72_73_74_75,searchweb201560_4
i received this replacement back case (all on aliexpress seem the same model) for a while but i'm not satisfied with it. The back with the "glass" feels quite nice but the "aluminium-frame" on the side is just 4 too thin aluminium-stripes glued on the plastic case. the stripes also easily bend when you are trying to remove the case.
i will stick with the original back case until there is some single aluminium frame/case to buy!
If you search "Aluminium Metal Bumper Frame phone Case for xiaomi redmi note2 Ultra Slim hard Hippocampus Buckle cover" it might be what you're looking for. Im not sure if its full metal alloy though.
Or luphie brand seems good, but more expensive. looking for reviews now.
any bumper and case cheap?
frogduck said:
If you search "Aluminium Metal Bumper Frame phone Case for xiaomi redmi note2 Ultra Slim hard Hippocampus Buckle cover" it might be what you're looking for. Im not sure if its full metal alloy though.
Or luphie brand seems good, but more expensive. looking for reviews now.
Click to expand...
Click to collapse
i ve already seen this item on aliX, but i prefer a whole replacement cover made out of aluminium! but thanks anyway!
it's nice.
i got one with a acrylic back,the alluminum is thick so it make me lose 1 signal bar,wifi have same problem but it works but it feels cheap in hand.
Emmes said:
http://www.aliexpress.com/item/Redm...hweb201527_3_71_72_73_74_75,searchweb201560_4
i received this replacement back case (all on aliexpress seem the same model) for a while but i'm not satisfied with it. The back with the "glass" feels quite nice but the "aluminium-frame" on the side is just 4 too thin aluminium-stripes glued on the plastic case. the stripes also easily bend when you are trying to remove the case.
i will stick with the original back case until there is some single aluminium frame/case to buy!
Click to expand...
Click to collapse
Can you take pictures of your redmi ? it's hard to imagine what it looks like ! thx !
This is the "Aluminium Metal Bumper Frame phone Case for xiaomi redmi note2 Ultra Slim hard Hippocampus Buckle cover" mounted on my RN2.
The fram is real and solid alluminium, perhaps too smooth.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys, i was wondering if anyone tried or found a metal case or atleast a case that has a metal back for the galaxy s6.
The reason im asking is because i got a magnetic car mount and i dont want to stick the metal plate on the back of my phone, or the cover since it will look ugly. Thats why i am searching for a cover that already has a metal back and that should solve my problem. :good:
Saafir said:
I would think a metal case would interfere with wireless charging and signal. But I am just a dumb white guy soo
Click to expand...
Click to collapse
Yeah it might if it was all metal, but im asking if there is any case out there that may have atleast the back made from metal. Thanks
These moshi cases have the back side of aluminum http://www.ebay.com/itm/Moshi-iGlaz...665847?hash=item43ea5b6077:g:56YAAOSwFNZW0L6S
I have a case with metal all around the boarder and it kills GPS. Great case otherwise...
The Motomo's are Metal aluminium cases which works very good and protects phone from bad damages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Except aluminum won't work to stick to magnets
I just use a tight fitting plastic case like Spigen and stick the magnet inside the case. Since it's tight it holds the plate in the same place between the case and the phone.
Saafir said:
I would think a metal case would interfere with wireless charging and signal. But I am just a dumb white guy soo
Click to expand...
Click to collapse
oae08 said:
Yeah it might if it was all metal, but im asking if there is any case out there that may have atleast the back made from metal. Thanks
Click to expand...
Click to collapse
ruze said:
Except aluminum won't work to stick to magnets
I just use a tight fitting plastic case like Spigen and stick the magnet inside the case. Since it's tight it holds the plate in the same place between the case and the phone.
Click to expand...
Click to collapse
Metal back would interfere and hinder, if not completely block, the wireless charging. Personally, I wouldn't want to stick a magnet to my phone even with an intermediate material between the two.
I was thinking for the same magnetic, but changed my mind and went with plastic power case
For the people who like to sell their smartphones when they are bored with one model, it becomes necessary to keep the smartphone model in good condition so that they can get suitable resell or exchange value and mobile covers can allow you to get this advantage which means that you will not need to be always worried about the handling of your smartphone. Hope this article will help in this regards http://www.techinfoworld.com/importance-of-mobile-covers/
Hai