Related
I'm having trouble with my phone screen when I'm on a call. The display turns off and won't turn on until a few seconds after the call ends. Home and power buttons do nothing while the call is active.
Sensor fix
Did you install the sensor fix after flashing?
goldenatom said:
Did you install the sensor fix after flashing?
Click to expand...
Click to collapse
I didn't know about it. The website I got the install instructions from wasn't the greatest. I'm guessing just flash the one that says sensor fix http://forum.xda-developers.com/showthread.php?t=2488986 here?
I have a common problem in all ROMs I'm installing . whenever I answer a call or dial a call my screen goes off as if proximity sensor is activated and doesn't turn on even when I take it away from my ear or press my power button. Screen doesn't turn on at all during call.
Phone remains fine for a day or two after I wipe cache etc from recovery but again the problem starts. This happens in all custom roms and also in rooted stock ROM. My device is XT 1055.
Kindly suggest any solution as it causes lot of inconvenience.
abhishekturumella said:
I have a common problem in all ROMs I'm installing . whenever I answer a call or dial a call my screen goes off as if proximity sensor is activated and doesn't turn on even when I take it away from my ear or press my power button. Screen doesn't turn on at all during call.
Phone remains fine for a day or two after I wipe cache etc from recovery but again the problem starts. This happens in all custom roms and also in rooted stock ROM. My device is XT 1055.
Kindly suggest any solution as it causes lot of inconvenience.
Click to expand...
Click to collapse
Your device is a Moto X (1st generation/2013 )? A quick Google search would tell you this is a Proximity Sensor issue, it is device specific whether anything can be done or not, so you might want to check your device's group.
acejavelin said:
Your device is a Moto X (1st generation/2013 )? A quick Google search would tell you this is a Proximity Sensor issue, it is device specific whether anything can be done or not, so you might want to check your device's group.
Click to expand...
Click to collapse
No bro. Mine is a moto g3 xt1550. Searched the forum later yday and found that it is calibrating proximity sensor issue. Will try doing that and check. Thank you for the response
abhishekturumella said:
No bro. Mine is a moto g3 xt1550. Searched the forum later yday and found that it is calibrating proximity sensor issue. Will try doing that and check. Thank you for the response
Click to expand...
Click to collapse
Sorry, you must have typo'd earlier, you clearly said XT1055 which is a valid Moto device. Anyway, sounds like you're on the right track.
acejavelin said:
Sorry, you must have typo'd earlier, you clearly said XT1055 which is a valid Moto device. Anyway, sounds like you're on the right track.
Click to expand...
Click to collapse
Oops. Sorry. It was a typo. Mine is motog3 xt 1550.
abhishekturumella said:
Oops. Sorry. It was a typo. Mine is motog3 xt 1550.
Click to expand...
Click to collapse
please let me know if you can some how fix this issue. I have same issue ands I did proximity caliberatiin as well and it did not resolve my issue
chungomungo1 said:
please let me know if you can some how fix this issue. I have same issue ands I did proximity caliberatiin as well and it did not resolve my issue
Click to expand...
Click to collapse
I too did proximity sensor calibration but it worked only for few times. But the only solution that's working is whenever screen goes blank I rub with my finger on proximity sensor area for 3-4 times as if like cleaning it. Immediately the screen lights up. This is the solution am doing since past few times and its working consistently.
abhishekturumella said:
I too did proximity sensor calibration but it worked only for few times. But the only solution that's working is whenever screen goes blank I rub with my finger on proximity sensor area for 3-4 times as if like cleaning it. Immediately the screen lights up. This is the solution am doing since past few times and its working consistently.
Click to expand...
Click to collapse
Thanks
Can we disable the proximity sensor ???
Mohammed Siamwala said:
Can we disable the proximity sensor ???
Click to expand...
Click to collapse
Yes u can disable the proximity sensor.....
Procedure:
1. The device need to be rooted
2. Install the xposed module
3. After installing search for sensor Disabler apk in xposed module
4. Install sensor Disabler and open the app and select the proximity sensor.
5. Select the value of proximity sensor to Maximum level and save it
6. Do the reboot
This whole procedure will disable ur proximity sensor ie ur screen will no go blank on any call.
Note : Xposed installer for nougat ROM is in development phase ...
Do it ur own risk I'm not responsible for any harm.
All the best :good::laugh:
abhi8939 said:
Yes u can disable the proximity sensor.....
Procedure:
1. The device need to be rooted
2. Install the xposed module
3. After installing search for sensor Disabler apk in xposed module
4. Install sensor Disabler and open the app and select the proximity sensor.
5. Select the value of proximity sensor to Maximum level and save it
6. Do the reboot
This whole procedure will disable ur proximity sensor ie ur screen will no go blank on any call.
Note : Xposed installer for nougat ROM is in development phase ...
Do it ur own risk I'm not responsible for any harm.
All the best :good::laugh:
Click to expand...
Click to collapse
Thanks for your help !!
But will need to wait as I'm using Nougat ROM :laugh:
Any disabling method for 7.1.1 ???
Mohammed Siamwala said:
Thanks for your help !!
But will need to wait as I'm using Nougat ROM :laugh:
Any disabling method for 7.1.1 ???
Click to expand...
Click to collapse
To my knowledge it is not there... U can Google it bro
As I'm also facing this problem...
Some info about xposed....
Xposed is not compatible with Nougat, the truth is it may never be a viable option again due to security changes in Android. The developers have said that Xposed is on it's last legs, the changes in Android and the security are becoming impossible to work around. Remember last year at this time, the developers of Xposed had mostly given up and thrown in the towel and said Xposed was dead with Marshmallow, but they got lucky and found a work around just before completely giving up. They have not as yet found such a exploit to make it work, and if they do it will only be temporary as the next version of Android will probably close it again. They may get it to work with Nougat, or maybe not, either way best bet is to learn to live without it, because it will be gone before too long.
abhishekturumella said:
I have a common problem in all ROMs I'm installing . whenever I answer a call or dial a call my screen goes off as if proximity sensor is activated and doesn't turn on even when I take it away from my ear or press my power button. Screen doesn't turn on at all during call.
Phone remains fine for a day or two after I wipe cache etc from recovery but again the problem starts. This happens in all custom roms and also in rooted stock ROM. My device is XT 1055.
Kindly suggest any solution as it causes lot of inconvenience.
Click to expand...
Click to collapse
hi buddy i have a solution for this hope this will be helpful............
i have flashed the cm 12.1 yesterday on my moto g3 and since yesterday i didn't faced the problem of screen going off on call .....
this conclude that rom is somewhere responsible for screen off during call on some phones( my opinion )
you can try this if u want:fingers-crossed:
This will help you mate
github.com/Alberto97/proprietary_vendor_motorola/blob/cm-14.1/osprey/proprietary/lib/hw/sensors.msm8916.so?raw=true
Paste this in system>lib>hw>
And change the permission to rw- r-- r--
Guys!
Do you experience proximity sensor issues while answering calls on OP7P?
For me while I'm on calls. The display comes on and gets disturbed and get pressed by my ears all the time.
Also any idea of where the proximity sensor is located on OP7P?
Thanks ?
Yes, I'm having the same issues. While I'm on calls I often activate the notifications pulldown. It would be nice to know how to fix this.
If you pull down the notification shade, the sensor is located just above the fifth icon on the first row. IE behind the screen.
If you pull the shade all the way down it is above and between the third and fourth icons. Easiest way to describe it. Put your thumb over that area with auto brightness on to watch the slider move.
Annoying while on a call that the screen comes on.
I'm experiencing the exact same issue with the caller app.
I also tried to make a flip cover to turn screen on or off with a proximity sensor detection app and it didn't work either.
I search a little in engineer mode (*#808#) and found that there is multiple proximity sensor, the IR sensor work quite well but it doesn't seem to be the default one.
The default one seems to be the ultrasonic sensor which works really bad.
There is also a "TP" proximity sensor which seems to be a near field detection which seems to work if I move my hand near the screen.
The sad thing is that in dedicated app to use or test proximity sensor (and in antutu or else) only one proximity sensor is listed (The ultrasonic one I guess) so you cannot switch to use the one which is working well.
Isn't this in the wrong place? Shouldn't it be in the Questions and Answers section?
Mods?
Probably just here looking for a mod to improve the situation
Actually I was going to open a new thread in Q&A when I found this one with the same subject and problem.
Do you think I need to open a new thread?
Is any of you experiencing the same issue as I described in my answer?
did anyone calibrate the proximity sensor using *#808# first? That seems to fix double tap to wake for some people
I tried to with no luck but as I explain in my first message the IR sensor is only used when screen is off (that's why it could help with double tap to wake)
But when screen is on another or couple another sensors are used and you can't calibrate them.
I think ultrasonic sensor is used when screen is on.
Do someone tested proximity sensor with any app on the play store? (Like proximity sensor test)
Put it on a table and check if it's working, mine is absolutely not. If I hold it like I was about to phone it works a little but it's not impressive.
Since I got 9.5.7 (EU version) earlier this evening screen turn off when I make a call.
I'm having this issue since 9.5.8... It's very annoying and I'm really disappointed, I often turn on airplane mode during a call... I tried to calibrate but it doesn't work.
I'm very very frustrated
schmeggy929 said:
did anyone calibrate the proximity sensor using *#808# first? That seems to fix double tap to wake for some people
Click to expand...
Click to collapse
When I click on proximity test it says it needs calibration how do I do that cause otherwise I can not test my proximity sensor cause when I click on it nothing happens
I am on 9.5.8
dallasnights said:
When I click on proximity test it says it needs calibration how do I do that cause otherwise I can not test my proximity sensor cause when I click on it nothing happens
I am on 9.5.8
Click to expand...
Click to collapse
This...
I've been having issues with phone calls but more so with pocket issues.. When I had the 6t pocket mode kept the phone neutral but this phone doesn't seem to have an accurate prox sensor.. Is there a way to activate a pocket mode?
Sent from my [device_name] using XDA-Developers Legacy app
Happening to me too, approached oneplus via live chat about this issue and at one point they said to wipe and reset my phone even if I told them the sensor is working but seems badly calibrated. Will try the wipe & reset and if it's not working I am returning my phone.
Proximity sensor is working fine - there is a bug elsewhere on the firmware that does not lock the screen when it is blacked out
pinzarualex said:
Happening to me too, approached oneplus via live chat about this issue and at one point they said to wipe and reset my phone even if I told them the sensor is working but seems badly calibrated. Will try the wipe & reset and if it's not working I am returning my phone.
Click to expand...
Click to collapse
Let us know if it's going to fix the issue wiping and resetting everything please!!!
Jaco2k said:
Proximity sensor is working fine - there is a bug elsewhere on the firmware that does not lock the screen when it is blacked out
Click to expand...
Click to collapse
But I have had this issue since release.. Do you a link to this information? If that's the case maybe someone can look into the firmware and see if it's minor tweak that can fix it?
Sent from my [device_name] using XDA-Developers Legacy app
Jack_Sparrow_ said:
Let us know if it's going to fix the issue wiping and resetting everything please!!!
Click to expand...
Click to collapse
Of course it didn't fix anything...
Jaco2k said:
Proximity sensor is working fine - there is a bug elsewhere on the firmware that does not lock the screen when it is blacked out
Click to expand...
Click to collapse
This has been an issue since the release. Do you have a link to where you read this information? If it is the firmware maybe someone can look into the settings and see if needs a tweak..
Sent from my [device_name] using XDA-Developers Legacy app
j0hnee said:
This has been an issue since the release. Do you have a link to where you read this information? If it is the firmware maybe someone can look into the settings and see if needs a tweak..
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I have reported this to Funk wizard on the OOS support thread and he said he cannot reproduce it anymore on the latest test build, so... We have to wait for next firmware release and see if that is indeed the case
Hello,
I done the last official update, now when i make a call my screen become black.
How can i fix it ?
jkd said:
Hello,
I done the last official update, now when i make a call my screen become black.
How can i fix it ?
Click to expand...
Click to collapse
It's called a proximity sensor, i.e when the phone detects your ear is close by to the receiver during a call, it switches off the screen to save battery. There's an option somewhere to disable it..
Naveenthemi said:
It's called a proximity sensor, i.e when the phone detects your ear is close by to the receiver during a call, it switches off the screen to save battery. There's an option somewhere to disable it..
Click to expand...
Click to collapse
I know that, but here the display become black only with the outed calling and the phone isn't near my ear.
Did you found any solution for that i am facing the same issue ???
Hemant1234 said:
Did you found any solution for that i am facing the same issue ???
Click to expand...
Click to collapse
I disabled the proximity sensor in incoming call settings
Whenever my hand lands on the fingerprint when iam holding the phone it vibrates and its annoying unlike my previous k20 pro i didnt face this problem there must be some toggle or settings that i can enable to remove this problem any suggestions ????? Thank you ....
BassilZ said:
Whenever my hand lands on the fingerprint when iam holding the phone it vibrates and its annoying unlike my previous k20 pro i didnt face this problem there must be some toggle or settings that i can enable to remove this problem any suggestions ????? Thank you ....
Click to expand...
Click to collapse
Add two fingerprints
Sent from my POCO F2 Pro using Tapatalk
Thaiban said:
Add two fingerprints
Click to expand...
Click to collapse
How is tha gonna stop accidental fingerprint detection and vibration??
The solution is to deactivate the fingerprint sensor ?
More seriously, there is no false detection, the sensor is doing its job, as soon as it feels a finger it tries to visualize the fingerprint, I do not see what is boring, If it wasn't so sharp it would be a nightmare to unlock the device !
coyot352 said:
The solution is to deactivate the fingerprint sensor
More seriously, there is no false detection, the sensor is doing its job, as soon as it feels a finger it tries to visualize the fingerprint, I do not see what is boring, If it wasn't so sharp it would be a nightmare to unlock the device !
Click to expand...
Click to collapse
No, you're wrong. It could be set to only vibrate when it detects a correct fingerprint. Which would be much more logical in my opinion. Or give the option to only activate the fingerprint sensor after power button is pressed.
popoyaya said:
No, you're wrong. It could be set to only vibrate when it detects a correct fingerprint. Which would be much more logical in my opinion. Or give the option to only activate the fingerprint sensor after power button is pressed.
Click to expand...
Click to collapse
the vibration is not there to validate the unlocking, something that we see anyway when the home screen opens, but to say that the analysis of the finger starts and that we are at the right place..
The last option might be fine for you, but personally it's a waste of time having to press a key before I can scan my finger, not sure Poco implements this In a future update ! ?
coyot352 said:
the vibration is not there to validate the unlocking, something that we see anyway when the home screen opens, but to say that the analysis of the finger starts and that we are at the right place..
The last option might be fine for you, but personally it's a waste of time having to press a key before I can scan my finger, not sure Poco implements this In a future update !
Click to expand...
Click to collapse
These options should be there for those who want them, they're easy to implement. Options are good I too find it annoying reaching into my pocket and having the phone light up and vibrate unintentionally.
Yeah noticed that also here where it rarely happend with my k20. It's just the new fingerprint placement.
popoyaya said:
These options should be there for those who want them, they're easy to implement. Options are good I too find it annoying reaching into my pocket and having the phone light up and vibrate unintentionally.
Click to expand...
Click to collapse
Yes indeed having more options is positive, I'm just saying that I don't think they will, as it's a pretty special option that very few require.
Normally if you are looking for the device in the pocket, it should not turn on or vibrate because it is deactivated by the proximity sensor, in any case mine remains as dead if I hide the part upper screen..
I hope for you that a function will emerge
For me, it is clear that the "old" hardware fingerprint sensor is much better than the modern software sensor that's imposed on new devices.
But we cannot change this, so yes : some options for lock screen vibration activation-deactivation are welcome. Me too don't like to feel the phone vibration every time I touch accidentally the screen trying to extract something of my pocket, including the phone.
BassilZ said:
Whenever my hand lands on the fingerprint when iam holding the phone it vibrates and its annoying unlike my previous k20 pro i didnt face this problem there must be some toggle or settings that i can enable to remove this problem any suggestions ????? Thank you ....
Click to expand...
Click to collapse
You can disable 'haptic feedback' in the settings, it will disable the fingerprint sensor's vibration too.
Lowxorx said:
You can disable 'haptic feedback' in the settings, it will disable the fingerprint sensor's vibration too.
Click to expand...
Click to collapse
But that disables vibration system wide doesn't it?
oroboros74 said:
But that disables vibration system wide doesn't it?
Click to expand...
Click to collapse
Yes, only for interactions like button press, gestures,etc.