Related
Ok, There are a lot of posts and information regarding the GPS issue that some are experiencing. I am starting (yet) another post in the interest of compiling and maintaining information regarding that information in one location. As users/devs find out information I will update this post so everyone doesn't have to go looking everywhere for the information. I am hoping that the Moderator will sticky this post.
Some users are experiencing very long lock times for their GPS. Everyone, after reading A LOT of posts/threads it seems to be the consensus that this is a software/settings issue - NOT, a hardware issue. However, results from tweaking the following settings are very mixed. Most seem to get great results by tweaking the following settings while stationary - but, moving is a whole different ball game. I use the below settings and have great results while stationary. However, my G1 blows the Captivate completely out of the water!!! My G1 gave 3-10m accuracy while driving. This device can barely keep me on the correct highway and always seem lagging behind my current location. The G1 was spot on no matter what. What hasn't been determined is if these issues are hardware or software. For whatever my opinion is worth - I think it is a firmware/software issue. Here are some things to try.
Here is the info:
To get to your GPS settings open you dialer and dial the following number. This will not call anyone - it is a code shortcut to the settings:
*#*#1472365#*#*
Once entered you will observe a screen that has five buttons:
Get Position Test
Application Settings
SUPL/CP Settings
Test Application
Delete GPS Data
We will be interested in three of these initial buttons.
Get Position Test: This will be what one uses to test the results of your changes.
Application Settings: Exactly what it says.
SUPL/CP Settings: settings that determine specific data connectivity with the satellites.
In Application Settings the following are some that you might consider adjusting:
Operation Mode - Standalone, MS Based, MS assisted, Network Provider
Accuracy - defaults to 50. Don't set it below 10 (and only use increments of 10's)
SkyHook - not sure what it does. But, someone on a thread mentioned it and it DOES effect satellite lock times.
In SUPL/CP Settings one we'll be interested in the following:
Server FQDN Type
Server
Server Port
The following are the options provided on other threads:
Original/Stock Settings:
SUPL/CP Settings/SErver FQDN Type/Custom Config
Application settings/Operation Mode/Standalone
SUPL/CP Settings/Server/www.spirent-lcs.com
SUPL/CP Settings/Port/7275
Second suggested setup (from other posts and claimed to have great results):
SUPL/CP Settings/SErver FQDN Type/Custom Config
Application settings/Operation Mode/MS Based
SUPL/CP Settings/Server/supl.google.com
SUPL/CP Settings/Port/7276
Other settings that I have played with:
Application settings/SkyHook/On (and Off)
SUPL/CP Settings/SErver FQDN Type/Auto Config (and Custom Config)
You can play around with these to see what gives you the best results. If your GPS doesn't work better with whatever changes you made - than you can always put it back to the orginal settings above.
However, it has been recommended and I concur (for whatever that is worth) that you NEED TO SET THE FOLLOWING BEFORE YOU START PLAYING AROUND: Settings/Location and security/uncheck (turn off) "Use Wireless Networks). Most likely this won't really effect anything while your testing within the GPS settings - however, this will effect your results if you test using Google Maps, etc.
Now, having duly noted all of the above and having played around with the settings for several hours I found the best results FOR MY DEVICE IN MY AREA AT ONE LOCATION was the following:
Note: I adjusted these settings from earlier as the earlier settings proved to be very accurate when stationary - but, very inaccurate while moving. The latest settings I'm using are below. Also, look to the bottom of this post regarding changing your gps configuration file. That also helped A LOT. The bottom section of information is from the Official websites that run the time servers(effects GPS performance).
Application Settings/Operation Mode/MS Based
Application Settings/Operation Mode/SkyHook/ON (VERY IMPORTANT)
SUPL/CP Settings/Server FQDN Type/Custom Config
SUPL/CP Settings/Server/supl.google.com
SUPL/CP Settings/Server Port/7276
SUPL/CP Settings/SUPL Secure Socket/Off
Turning "SkyHook" ON assisted in faster locks with ALL of my tested settings when stationary!
My test results with the above would lock on up to three satellites in under four seconds and between 7 and 10 by eight seconds. Google Maps would locate me in about 6-8 seconds.
Using "Get Position Test" the settings in the three lines above consistently gave the not only the fastest locks and the most locks - but, also STRONGER SIGNALS!
I used at least seven different combinations of the above settings and some of them were just as quick - but, not as strong. Most of them were slower.
If anyone has better information to add then please PM me and I will add it to this top post.
LASTLY, I will make some guesses as to what some of the other settings do as I have heard different information:
Application Settings:
Session Type: Tracking or Singleshot - obvious (use Tracking)
Start Mode: Hot or Cold Start - someone posted on a thread that Hot uses data from your last read to get started. Cold start will start all over. So, Cold start SHOULD increase the time for you to get a lock unless you went left the area to an area that had different satellite to look up.
Test Application:
Performance Test: worked for me - but, I found the test above to work faster and give me quicker results for what I wanted.
Hardware Test/Sensitivity Test: Pretty cool - went on forever and I stopped it.
CNO Test: Seemed to test the average satellite signal strength.
Antenna Test: Never worked for me and I received errors.
H/W Test Settings: Settings for the above tests - I didn't mess with them.
NOTE: WANT TO SEE HOW ACCURATE YOUR ACCELEROMETER/COMPASS/ORIENTATION settings are? Check this out:
Test Application/Show Sensor Data - there is no way to calibrate it here... But, you can see just how sensitive your instruments are!!
Delete GPS Data - I didn't select this button and I don't recommend anyone else doing so either unless someone from Samsung tells us what it does. LOL!
FINALLY: Keep in mind that if you are seeing GPS lock times that are in the 3-8 second range (which was what I was getting) this WILL NOT be how long it takes for Google Maps to get the GPS data! Expect 8-15 seconds or a little longer (but, under 30 seconds) for Google Maps to pick up your location. Although the GPS sensors might pick up the satellites - you still have to give the software time to evaluate the data and apply it to the software.
Hope this helps someone out there.
Update/Additional Information (http://androidforums.com/1194187-post197.html):
Hot Start - The GPS receiver remembers its last calculated position and which satellites were in view, the almanac used, and the UTC Time. It then performs a reset and attempts to acquire satellites and calculate a new position based upon the previous information. This is the quickest re-acquisition of a GPS lock.
Cold Start - The GPS receiver dumps all information and resets. It then attempts to locate satellites and then calculate a GPS lock. This takes the longest because there is no known information. The GPS receiver has to attempt to lock a satellite signal from all of the satellites, basically like polling, which takes a lot longer than knowing which satellites to look for. This re-acquisition of a GPS lock takes the longest.
Thanks to Shadow77895 for the link to this info. I altered the settings above. Doesn't effect my results much at all.
MSBased Operation Mode(http://www.vzwdevelopers.com/aims/public/menu/lbs/LBSFAQ.jsp#GenQues11):
What is MS-Based mode of operation?
In MS-Based mode, the network provides the satellite information to the device, based on a rough estimate of where the device is located, and the device acquires the GPS signals from the satellites and calculates its location. After the initial fix, the device operates like an autonomous GPS receiver, until the satellite information must be refreshed, at which time the device goes back to the network to update the satellite information. MS-Based mode is appropriate for applications that require the device location to be updated rapidly, such as a navigation application.
And email thread regarding using the Google settings for GPS(http://osdir.com/ml/android-platform/2009-08/msg00386.html)
NEW INFORMATION!!!
ALSO! Check out this page: http://www.pool.ntp.org/en/use.html:
As pool.ntp.org will assign you timeservers from all over the world, time quality will not be ideal. You get a bit better result if you use the continental zones (For example europe, north-america, oceania or asia.pool.ntp.org), and even better time if you use the country zone (like ch.pool.ntp.org in Switzerland) - for all these zones, you can again use the 0, 1 or 2 prefixes, like 0.ch.pool.ntp.org. Note, however, that the country zone might not exist for your country, or might contain only one or two timeservers. If you know timeservers that are really close to you (measured by network distance, with traceroute or ping), time probably will be even better.
Find your optimal pool server here: http://www.pool.ntp.org/zone/north-america
For US the optimal server is: us.pool.ntp.org
Reference other threads I (http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=731462) I recommend you do the following:
Use Root Explorer or some other method (I use Root Explorer as it has a built in Text Editor and automatically backs up the altered file.) to go to here:
system/etc/gps.conf
Use the text editor to alter the gps.conf file to this (if you are in the US):
NTP_SERVER=us.pool.ntp.org
XTRA_SERVER_1=north-america.pool.ntp.org
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
If you are NOT in the US go to here: http://www.pool.ntp.org/en/use.html and look at the links in the center of the page to navigate to the closest pool to your geographical location and use that pool for the top server entry.
REQUEST FOR ADDITIONAL INFORMATION:
Many are suggesting that we do NOT leave the Secure Socket ON. How will this effect data security with our devices? I don't understand how it could hurt us... But, there must be a reason for it. If someone could let me know I would appreciate it.
Good, guide, think you meant hot start should be faster though.
I'll be linking to this.
Sent from my Samsung Captivate using XDA app
Great, but doesn't address the problem
I need to point out that while this information is helpful it doesn't really address the problem that the GPS is facing.
What the above settings are doing is enabling multiple different A-GPS technologies to help compensate for the Galaxy S's poor GPS performance. A properly functioning GPS unit would not need these crutches except to acquire a faster fix.
I had my GPS outdoors today, with the first set of recommended settings, and was unable to achieve a fix while seven satellites were in view (according to it) with sufficient signal strength. This is a GPS firmware issue!
The above post is very helpful for people to get some better performance - however - the core GPS issues need to be addressed by Samsung.
I hope people will refrain from saying "It's perfect now!" and let up on Samsung. Unless you know what what the following are you're tweaking settings blindly and declaring victory: ephemeris, PDOP, SBAS, WGS-84, 2D fix, 3D fix (And the conditions one is chosen over the other.) and finally SA
I'm betting this phone would never achieve a fix in an SA environment! It's also clear that the person(s) who originated this information knew exactly what they were doing..!
If anyone is interested in learning how GPS works there are tons of great resources on the web that Google will point you to. Of course they're written for all sorts of different levels.
In short, the above settings may help, but please don't become convinced that things are "fixed"!
I'd suggest you read my posts on the subject:
http://forum.xda-developers.com/showthread.php?p=7244888#post7244888
http://forum.xda-developers.com/showthread.php?p=7289539#post7289539
@haydonxda - I agree that this does NOT address the potential problem that the firmware and/or hardware is inadequate! And, we should put pressure on Samsung to fix this issue. However, the phones have already been produced and I'm just trying to do the best with I have.
@Shadow77895 - thanks for the info. Added a bunch of further information after looking into your posts and references from them.
Try this fix (from 4pda.ru), working on Galaxy S, root access required:
$su
#cat /data/gps/secgps.conf > /sdcard/secgps.conf
#rm /data/gps/secgps.conf
#reboot
After reboot, new (correct) secgps.conf appears.
At your own risk!
shaneaus said:
NEW INFORMATION!!!
ALSO! Check out this page: http://www.pool.ntp.org/en/use.html:
As pool.ntp.org will assign you timeservers from all over the world, time quality will not be ideal. You get a bit better result if you use the continental zones (For example europe, north-america, oceania or asia.pool.ntp.org), and even better time if you use the country zone (like ch.pool.ntp.org in Switzerland) - for all these zones, you can again use the 0, 1 or 2 prefixes, like 0.ch.pool.ntp.org. Note, however, that the country zone might not exist for your country, or might contain only one or two timeservers. If you know timeservers that are really close to you (measured by network distance, with traceroute or ping), time probably will be even better.
Find your optimal pool server here: http://www.pool.ntp.org/zone/north-america
For US the optimal server is: us.pool.ntp.org
Reference other threads I (http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=731462) I recommend you do the following:
Use Root Explorer or some other method (I use Root Explorer as it has a built in Text Editor and automatically backs up the altered file.) to go to here:
system/etc/gps.conf
Use the text editor to alter the gps.conf file to this (if you are in the US):
NTP_SERVER=us.pool.ntp.org
XTRA_SERVER_1=north-america.pool.ntp.org
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
If you are NOT in the US go to here: http://www.pool.ntp.org/en/use.html and look at the links in the center of the page to navigate to the closest pool to your geographical location and use that pool for the top server entry.
Click to expand...
Click to collapse
How do you use the text editor in Root Explorer. I can see the text but it won't allow me to edit it.
Hello, the code:
*#*#1472365#*#*
starts a GPS Test Application.
The settings inside this application are only for this application.
You can test your GPS in different modes.
But the settings are not relevant for other applications.
It is a simple illusion that it helps to manipulate this settings.
GPS is very time-dependent.
And:
I don't know where we can change the default GPS Mode/s...
So when I walk outside my office there are like 7 satellites, and I still cannot get a lock. This is sad.
Out of the box it worked great, navigated from BB to my house with relative ease. Inside my house when I showed my parents it worked great. I rooted and deleted some ATT apps. I have yet to get a lock.
I have also changed the NTP servers and no dice. This is pretty saddening performance.
I still don't get why my Nexus One, sitting right next to my Samsung Captivate, is able to get a aGPS location (via My Location in maps) that is pretty damn accurate despite not having a GPS lock and my Captivate is unable to even get an aGPS location and just says my location data is temporarily unavailable.
Nexus One: Can get approximate location very easily
Samsung Captivate: Cannot even get approximate location using WIFI/Cell Towers.
Foursquare never knows where I am until I go outside in the middle of a parking lot. This is BS.
Won't anyone try GPS NMEA MONITOR App and see if the data sentences are correct? If the GPS chipset is putting out the correct Lat/Lon, then you can fiddle and fiddle what Captivate does with the information
Has anyone tried to contact Samsung about the issue yet? I tried yesterday and was on hold for an hour and half and then my call dropped. I'm joint to try again today.
SkyHook isn't a "feature" persay, it's a corporation: http://www.skyhookwireless.com/
Same one Apple uses. Not sure exactly how it works but they do wardrive and use WiFi and triangulation to pick up your position as well, so leaving that OFF will perhaps be better for calibrating your GPS settings, but you certainly want it back ON when in normal use.
TexUs said:
SkyHook isn't a "feature" persay, it's a corporation: http://www.skyhookwireless.com/
Same one Apple uses. Not sure exactly how it works but they do wardrive and use WiFi and triangulation to pick up your position as well, so leaving that OFF will perhaps be better for calibrating your GPS settings, but you certainly want it back ON when in normal use.
Click to expand...
Click to collapse
What kind of aGPS does the Nexus One use? I tried to dial the code and it didn't bring up the same menu on the Nexus (it may be different). My Nexus is great at figuring out where I am without a GPS signal.
I changed all my settings last night and it seemed to fix the issue. I was getting a lock within 10 seconds or less. Now I cannot get a lock with the exact same settings and reboot. Has anyone contacted Samsung over this? Anyone get an answer from them? I love this phone but the GPS issue sucks.
Every time I try one of these new fixes it seems to work but then when I go somewher else it is broken again they need to fix this asap. I use that feature a lot
superscientific said:
I changed all my settings last night and it seemed to fix the issue. I was getting a lock within 10 seconds or less. Now I cannot get a lock with the exact same settings and reboot. Has anyone contacted Samsung over this? Anyone get an answer from them? I love this phone but the GPS issue sucks.
Click to expand...
Click to collapse
I just got off the phone with Samsung galaxy s support. They knew nothing!!!!!! Said I was the first one to call with the issue.
I'm thinking about returning the phone... GPS is the most important part of a smartphone to me... I'm very disappointed
Jreitnauer7 said:
I just got off the phone with Samsung galaxy s support. They knew nothing!!!!!! Said I was the first one to call with the issue.
I'm thinking about returning the phone... GPS is the most important part of a smartphone to me... I'm very disappointed
Click to expand...
Click to collapse
I don't know about most important but I agree, it's very important. This HAS to be fixed
Jreitnauer7 said:
I just got off the phone with Samsung galaxy s support. They knew nothing!!!!!! Said I was the first one to call with the issue.
I'm thinking about returning the phone... GPS is the most important part of a smartphone to me... I'm very disappointed
Click to expand...
Click to collapse
Don't give up hope, i'm sure that guy doesnt know anything. Engadget and a few sites are aware of the issue and i'm sure Samsung took notice. i'm sure a firmware fix is in the works.
Location
I have tried all the settings. And I don't really notice any difference. I live in the heart of Manhattan, NY., so I am sure roaming around int he concrete jungle trying to get a lock surely has a lot to do with my GPS issue. I do however, get a lock in every setting that has been written up in this forum, and other forums. The difference to me is hardly any, since it always takes many minutes for me to get a lock. I never have used any other GPS device since living here in the city, so I would like to ask other who live in a large city if it is taking them several minutes as well? Because it seems as though people are saying it is taking them only seconds to lock on. Hmmm.....
I have recently encountered more of an annoyance rather than a problem that got my head scratching. It is location and GPS related, so I searched for Galaxy S6 GPS problems in google, and I have noticed that some owners experience a lot of signal loss/searching in their phones. What I have found annoying in my case is that whenever the GPS signal is lost, Google Maps puts me in a wrong location that I have not been to for a while (around one month). I have lived in that location before, but I have since moved and no longer stay there. I have purchased the phone after moving. After a bit of experimenting I came to the conclusion that the building I currently live in blocks the GPS signal, since whenever I am in the balcony/near a window I get a signal and I'm put in the correct location in Google Maps. As soon as the signal is lost, Maps automatically puts me in that old location. This has also effected Google Now where I'm given incorrect travel times and directions, but not my weather location (set on current).
I have set 'Home' to my new location, I have also tried deleting my location history from google, tried a few GPS fixing apps, reinstalling Maps, and also installing other map applications like Here and Waze, which behave the same way and give me the same old location as my current.
At first I thought it could be a GPS hardware defect in the galaxy, but I turned on my old HTC One (M8) and it acted and behaved in the same way putting me in my old location. So it seems to me there's something in the Android OS perhaps since Here and Waze act in the same way. I also tested with the Maps app on an iPhone 6 and it gave the correct location although not 100% accurate. So is there anyway I can make Maps at least remember my last location before signal loss?
It is also absurd that my laptop can pinpoint my correct location while connected on Wifi while my phone with GPS, wifi and cell network cannot, which in conclusion seems like an android bug or something with location history in my google account which as I said already tried deleting the whole history.
Also note that the GPS and Maps work perfectly fine whenever I'm outside the building.
Google Maps has had weird location issues on Android since January or February. Affected the GPS accuracy / function of my Nexus 5 as well. I think the bug is actually in Google Play Services framework, not in AOSP or the Maps app.
s6 gps issue
ab1983 said:
I have recently encountered more of an annoyance rather than a problem that got my head scratching. It is location and GPS related, so I searched for Galaxy S6 GPS problems in google, and I have noticed that some owners experience a lot of signal loss/searching in their phones. What I have found annoying in my case is that whenever the GPS signal is lost, Google Maps puts me in a wrong location that I have not been to for a while (around one month). I have lived in that location before, but I have since moved and no longer stay there. I have purchased the phone after moving. After a bit of experimenting I came to the conclusion that the building I currently live in blocks the GPS signal, since whenever I am in the balcony/near a window I get a signal and I'm put in the correct location in Google Maps. As soon as the signal is lost, Maps automatically puts me in that old location. This has also effected Google Now where I'm given incorrect travel times and directions, but not my weather location (set on current).
I have set 'Home' to my new location, I have also tried deleting my location history from google, tried a few GPS fixing apps, reinstalling Maps, and also installing other map applications like Here and Waze, which behave the same way and give me the same old location as my current.
At first I thought it could be a GPS hardware defect in the galaxy, but I turned on my old HTC One (M8) and it acted and behaved in the same way putting me in my old location. So it seems to me there's something in the Android OS perhaps since Here and Waze act in the same way. I also tested with the Maps app on an iPhone 6 and it gave the correct location although not 100% accurate. So is there anyway I can make Maps at least remember my last location before signal loss?
It is also absurd that my laptop can pinpoint my correct location while connected on Wifi while my phone with GPS, wifi and cell network cannot, which in conclusion seems like an android bug or something with location history in my google account which as I said already tried deleting the whole history.
Also note that the GPS and Maps work perfectly fine whenever I'm outside the building.
Click to expand...
Click to collapse
I bought a case that was supposed to be a clear view but doesn't work and needs a proximity sensor app installed to work. It has the magnet and a lump for the chip. I also couldn't get a gps lock. Was seeing up to 6 satellites but not locking. I removed the case and got 17+ and a 3d lock straight away.
I came to the conclusion that my building blocks the GPS signal, but the annoyance comes from Google maps locating me in a default location far away from me whenever there is no signal.
Hello,
Which android device has the best satellite GPS? Note: I am asking purely about the satellite-gps, not AGPS or anything else that doesn't depend purely on satellites in the sky.
Also, is there a website that lists which phones use which hardware GPS chips? Excluding software AGPS, this is entirely a hardware question. So if I can eliminate ****ty phones with known pure-gps problems, I can check the chip and eliminate a slew of other devices that won't serve as a useful alternative.
To clarify "best":
[a] high-availability (ie: always able to get a lock, even if it takes an hour)
fast lock time
[c] accuracy
In my case, I absolutely require [a], and I am far more interested in having than [c]. Inaccuracy within ~200m is fine.
Background: I'm looking for an old, small, used android device that I can pickup on ebay for bicycle touring. This phone will be rooted without gapps, running osmand with downloaded maps.
When traveling down a deserted road in, say, Cambodia, and I come to an unmarked fork in the road, I'd like to be able to [a] pedal ~200m down my best-guess of the fork boot this android device in airplane mode [c] quickly get my gps coordinates [d] see where I am on the map [e] determine if I took the correct fork.
Currently, I'm using a Samsung Galaxy S4 (again, no AGPS). If I'm on a roof-top or in a field, I can sit, wait, and *never* get a GPS lock. Not only does it not get a lock, but the GPS Test and/or SatStat apps show that I can't see a single satellite. My guess is it's a hardware issue.
My searching online suggests that the S4 has *great* GPS lock-time, but it's hard to search & find reports from S4 users (or any phone for that matter) that don't use AGPS.
I'm thinking any phone that can run at least Android v3.0 = Honeycomb is fine. An older & lighter phone with a smaller screen is best. Of course, as long as it has a solid GPS chip
TIA!
First time posting, so please let me know if I missed something. I will edit as needed.
Ok, so I am trying to setup a Samsung Note 3 with GPS spoofing.
System Information:
Android Version: 5.0
Model Number: SM-N900T
Rooted: Yes
Kernel Version:3.4.0-6005498
What have I done so far:
I rooted my phone and installed SuperSU
I installed FakeGPS and set it as a system application
I have set my location to GPS Only
I have disabled Fused Location and rebooted my phone (several times)
I looked for GNSS and other suggested location services but I am unsure what else I should/could disable
Long story short, I am rubber banding between my real location and my GPS spoofed location (which is about 100 feet away).
I would really like to know if anyone has any solid ideas on what I can do.
I am 100% comfortable with ditching this OS and using another ROM (which I havent done before, but I could learn).
EDIT: From what I am reading this has to do with the phone Location Sniffing. I have Wifi and Bluetooth turned off. I have searched for the setting where the Wifi is always searching, but I could not find it on my device. I dont think it exists.
Additional input.
I wanted to add:
It seems that if I stop Fused Location and restart my phone, everything works properly for a short period of time but the real location starts leaking eventually.
This gives me the impression that something might be restarting Fused Location. Does anyone think this might be what is causing the issue? Or is there a program that might be able to actively kill Fused Location?
Is anyone experiencing problem with their GPS signal? Mine would lose the GPS lock constantly. Thanks.
Working fine on my end. Out and back, my drive was 5 hours total.
Sent from my VS995 using Tapatalk
No, no problems at all. And I used the GPS allot.
Sent from my LG-H918 using Tapatalk
Make sure yours is set to High accuracy. Mine was not after set up. I had to change.
Sent from my SM-T813 using Tapatalk
Even in high accuracy, I lose the gps signal frequently. Sigh
Do you have a case on your phone?
I just got my cases in and have noticed weaker gps performance since putting the phone in a case.
I've been having major GPS problems. Going for a run and expecting the phone to track my route and calculate my speed accurately shouldn't be too much to ask in late 2016. But my phone constantly loses the GPS signal (this was never a problem with my previous phone in the same location) and even when it doesn't, it can't figure out where I am. My run traces often show me two streets over in addition to thinking I'm jumping back and forth across a busy 5-lane road every 5 seconds or so. I run 6 miles and the phone thinks I've gone 8.25. Not useful for training for events.
Even if you don't want to use the phone to track exercise, there's another reason the bad GPS is annoying. It makes it impossible to take advantage of the feature allowing you to unlock the phone without using your fingerprint or pin based on your location. I have my phone set to be unlocked at home, but the phone apparently can't tell when I'm at home, making this setting completely useless.
As to GPS issues while driving, I haven't noticed them, but I've not used the phone for navigating either.
Would like to mention that while I have a case on it, it is quite light and doesn't seem like it should interfere so badly with the GPS. Will try checking the accuracy without the case and will update if this resolves the issues. Also, I have tried tinkering with the GPS accuracy settings but even selecting all the options to optimize accuracy has not worked for me.
The only thing you can do to test the case theory is to use the phone without that case. That said, it is possible you have a defective phone. I have read many articles about poor GPS being caused by a loose, internal connection. You might want to take your phone to a repair facility and have them check it out.
I have a US996 and, so far, GPS is nice.
how
wtharp2 said:
The only thing you can do to test the case theory is to use the phone without that case. That said, it is possible you have a defective phone. I have read many articles about poor GPS being caused by a loose, internal connection. You might want to take your phone to a repair facility and have them check it out.
I have a US996 and, so far, GPS is nice.
Click to expand...
Click to collapse
how can you change it to high?
No issues on my end yet, I use it navigating on a daily basis (racking up Waze points basically) and walking around, can't think of maybe one time it lost GPS driving and that was only briefly.
Mine was misbehaving horribly. I tried using google maps to see if it was something to do with Navigon, (my normal gps app) and somehow it seems like just running maps fixed it. It has been working great with Navigon now.
Go figure.
GPS on my Sprint version has worked great in all 3 options since day 1
Sent from my LG V20 using XDA Labs
On my rooted VS995 software version VS99513A on notsostock kernel v1.2 the GPS seemed to never be able to locate my current location. When I used it before without root it picked up quickly. Am going to try nostock kernek v1.1 the updated version and see if I get a difference. Plus now am running magisk instead of supersu so will see if that makes a difference.
It's possible that the a-gps data is corrupt. I'm not sure how you'd go about clearing that. There must be a cache file associated with gps daemon.
Try installing this:
https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2
And when GPS isn't working, run the app and see if it's receiving/decoding any satellites at all (bar lengths indicate strength, colour indicates successfully received all ephemeris data from satellite and therefore has lock - it can take a while without a-gps).
---------- Post added at 08:29 AM ---------- Previous post was at 08:27 AM ----------
P.s. I found that taking the back off my phone improves Wi-Fi. Metal blocks radio signals.
If you have low or no signals in a specific location, try popping the back of the phone and seeing if the signals become useable.
mmar3087 said:
Is anyone experiencing problem with their GPS signal? Mine would lose the GPS lock constantly. Thanks.
Click to expand...
Click to collapse
Sorry to bring up an old thread. I just bought a used LG V20 (at&t version, H910) on Craigslist the other day, and have had GPS issues that made me highly annoyed like I bought a lemon phone, and was getting ready to call LG Support, and pay a lot of money for repairs.
Happily, I did discover a trivial solution that I haven't really seen, so I thought I'd share it.
After I purchased the phone, I factory reset it. It seemed like the device would be able to triangulate a position, but it would be unreliable, move around, and the accuracy would be highly variable. (observed in Google Maps and Waze). These symptoms seem to be consistent with other people's experiences. The useful and highly recommended "GPS Status" and "GPS Test" apps, that normally show visible satellites were showing ZERO satellites. As suggested in various places, I used "GPS Status" to re-download the A-GPS databases, set "sensor filtering" to medium. Still, zero satellites, but a semi-functional GPS, which is confusing. I found the hidden menu code for the H910 (*#546368#*910#), and SAAT->"Manual Test"->"GPS/BT/Wifi test" and ran the hardware-level GPS diagnostics. I was getting signals of 0.0 db for GPS and GLO satellites, kind of suggesting the GPS hardware was faulty, and made me even less optimistic/more annoyed.
I was basically convinced GPS on my phone was kaput, and would need to be serviced, until I discovered ........
Rebooting the phone solved all of the GPS problems, and made GPS and GNO satellites visible and now GPS is 100% functional. It seems that since I initially factory reset the phone and did my normal installation, I never did a simple reboot. Since I haven't seen that kind of obvious solution on any of the forums, I thought it would be useful to report. I'm cautiously optimistic that was my only problem ......
good luck
=mxasf=
Bought a used one and having problems: it'll fix on several satellites but it's usually unable to acquire the specific location (latitude and longitude). Depending on the program, it will say "waiting for GPS fix" in osmtracker or "looking for GPS location" within 'GPS Status' (the app).
When it does get a 'Lock' (a specific location), its accuracy is 200-300m off. :/
I tried some of the other common tips and tricks:
I've downloaded new A-GPS data (using the 'GPS Status' app); tried using the GPS without my case on; doing a simple reboot, none of them work.
After more searching, I found this guide: https://imgur.com/a/VxeaU which recommends to place copper tape on the GPS antennas of your phone.
i have 2 V20's.. the one i bought back for myself is 12/2016 and another one is another batch 3/2017 for my wife..
What i'll found is the earlier one ( 12/2016 ) have the following issue :
- overheat
- kaput gps
- screen burn
While the one i bought for my wife ( 3/2017 ) doesn't even have the following issue above.. Furthermore, the screen also different.. my wife V20's tend to have a more saturated color, brighter screen and doesn't overheat as much as mine..
My conclusion is, only those with earlier batch of production have all this defect.. and to those who own it ( including me ).. i guess, we're unlucky!
i'll use my wife V20's as gps since mine V20 is good for nothing when GPS is a needs.... if she's not around, i'm totally doomed !
-----
if you guys wonder, there was no different in camera.... unlike G6 ( pheww~ )
both my and my wife V20's produce the same images quality..
mxasf said:
Rebooting the phone solved all of the GPS problems, and made GPS and GNO satellites visible and now GPS is 100% functional. It seems that since I initially factory reset the phone and did my normal installation, I never did a simple reboot. Since I haven't seen that kind of obvious solution on any of the forums, I thought it would be useful to report. I'm cautiously optimistic that was my only problem ......
good luck
=mxasf=
Click to expand...
Click to collapse
It's an old common fix
skorasaurus said:
Bought a used one and having problems: it'll fix on several satellites but it's usually unable to acquire the specific location (latitude and longitude). Depending on the program, it will say "waiting for GPS fix" in osmtracker or "looking for GPS location" within 'GPS Status' (the app).
When it does get a 'Lock' (a specific location), its accuracy is 200-300m off. :/
I tried some of the other common tips and tricks:
I've downloaded new A-GPS data (using the 'GPS Status' app); tried using the GPS without my case on; doing a simple reboot, none of them work.
After more searching, I found this guide: https://imgur.com/a/VxeaU which recommends to place copper tape on the GPS antennas of your phone.
Click to expand...
Click to collapse
I followed that guide (credit https://www.reddit.com/r/lgv20/comments/7fx2gz/becareful_buying_the_top_plastic_bezel_of_the_v20/)
and bought copper tape (https://www.amazon.com/Copper-Conductive-Adhesive-1inch-12yards/dp/B018RDZ3HG) off amazon.
For me and my VS995; there were metal contacts (see picture 1 of the imgur album) and the metal contacts were silver, not gold.
Nonetheless, I put some copper tape only on the first contact as shown in picture 1 and my signal improved dramatically. The lowest accuracy that I can get (lower is better) now is about 8m and it has been hovering around 15m; and still takes a few seconds to
This is compared to my s5, where I could get an accuracy as low as 4-5m and usually hovers around 8-10m and could obtain my location within 10 seconds after turning on GPS.