[Q] clear moto x 2014 cases??? - X 2014 Accessories

I'm sorry if this has already been posted and I just couldn't find it but here we go.
I just got the new moto x from Verizon the other day, I got the football backed one and I'm trying to find an all cleat tpu type case but I can't seem to find any, all the ones iv found are frosted does anyone know of any out there

pontiacjack said:
I'm sorry if this has already been posted and I just couldn't find it but here we go.
I just got the new moto x from Verizon the other day, I got the football backed one and I'm trying to find an all cleat tpu type case but I can't seem to find any, all the ones iv found are frosted does anyone know of any out there
Click to expand...
Click to collapse
I was actually just looking for the same thing. Came here searching and haven't found much. I think I'm going to give this one a shot:
http://www.amazon.com/Orzly®-Invisi...671024&sr=8-3&keywords=moto+x+2014+clear+case

Verizon stores have a case with a clear back and black bumper sides.

I haven't seen an all-clear TPU-only case. I ended up settling for the Cimo X-line case.
This one is a hybrid... it's about the closest thing I've seen: http://www.case-mate.com/Moto-X-2nd-Gen-Cases/Case-Mate-Moto-X-2nd-Gen-Naked-Tough-Cases.asp

gabriel_hart said:
I haven't seen an all-clear TPU-only case. I ended up settling for the Cimo X-line case.
This one is a hybrid... it's about the closest thing I've seen: http://www.case-mate.com/Moto-X-2nd-Gen-Cases/Case-Mate-Moto-X-2nd-Gen-Naked-Tough-Cases.asp
Click to expand...
Click to collapse
I've been trying to decide between the Clear Cimo X vs Wave design. Could you post some pics of the Cimo X design to see how it looks on the phone? Thanks

I bought the Cimo as a temp while my casemate hula came in, but it is a very nice case. Slim, unobtrusive, and a good fit.
I much prefer the X-line over the wave because I'm a stickler for symmetry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gabriel_hart said:
I bought the Cimo as a temp while my casemate hula came in, but it is a very nice case. Slim, unobtrusive, and a good fit.
I much prefer the X-line over the wave because I'm a stickler for symmetry.
Click to expand...
Click to collapse
That is very nice. I ended up ordering both since I wasn't sure but I will definitely be using the X design. Thanks for the pics!

pontiacjack said:
I'm sorry if this has already been posted and I just couldn't find it but here we go.
I just got the new moto x from Verizon the other day, I got the football backed one and I'm trying to find an all cleat tpu type case but I can't seem to find any, all the ones iv found are frosted does anyone know of any out there
Click to expand...
Click to collapse
On another note, how are you liking the football backed one? I'm kind of regretting not going with that one and thinking about being stupid and just buying that one alright and selling my current one on ebay

mjs2011 said:
On another note, how are you liking the football backed one? I'm kind of regretting not going with that one and thinking about being stupid and just buying that one alright and selling my current one on ebay
Click to expand...
Click to collapse
I love my football back when, I almost made the same mistake of buying the black one because when I first walked into the store and I took a look at the football one I actually didn't like it at first glance, but after I told the guy I wanted the black one and he was sitting up the other phone that was being put on our phone line I took another look at the football back and decided that it would be really cool to have because not only does it look cool but it is something you don't see very often so I told him to switch my phone now and honestly I don't think I would be as happy with the phone if it wasn't the football back, because I know a few people with the Moto X and they're all completely jealous of mine unfortunately no, I am stuck with Verizon's black jelly case covering its beauty until I can find a good protective clear case of some sort

gabriel_hart said:
I bought the Cimo as a temp while my casemate hula came in, but it is a very nice case. Slim, unobtrusive, and a good fit.
I much prefer the X-line over the wave because I'm a stickler for symmetry.
Click to expand...
Click to collapse
I second the x case. Bought it on eBay about a month ago and love it.

gabriel_hart said:
I bought the Cimo as a temp while my casemate hula came in, but it is a very nice case. Slim, unobtrusive, and a good fit.
I much prefer the X-line over the wave because I'm a stickler for symmetry.
Click to expand...
Click to collapse
So..you have the smoked version, looks like..I have the wave clear version ordered..the clear, I hope doesn't hide the beauty of the device..see-thru is what I'm hoping for.!
1) how does the (button)s function, normally, or does it take a bit more pressure.?
2) are the sides grippy, to help with less chance of dropping..
here's the model I ordered, what's your opinion, other than the design on the back.?
Sent by my Motorola Droid XYBoard MZ617-32 10.1_ICS 4.04

NWKENT said:
So..you have the smoked version, looks like..I have the wave clear version ordered..the clear, I hope doesn't hide the beauty of the device..see-thru is what I'm hoping for.!
1) how does the (button)s function, normally, or does it take a bit more pressure.?
2) are the sides grippy, to help with less chance of dropping..
Click to expand...
Click to collapse
I actually have the clear version - I have the slate back on my phone.
1) The buttons function maybe not quite as well as the naked buttons, but really not bad. And honestly, I don't use the buttons on my phone too much.
2) The TPU is relatively smooth on the edges, but still has more grip than the slippery metal.
And other than the back design, they should be about the same.

NWKENT said:
So..you have the smoked version, looks like..I have the wave clear version ordered..the clear, I hope doesn't hide the beauty of the device..see-thru is what I'm hoping for.!
1) how does the (button)s function, normally, or does it take a bit more pressure.?
2) are the sides grippy, to help with less chance of dropping..
here's the model I ordered, what's your opinion, other than the design on the back.?
Sent by my Motorola Droid XYBoard MZ617-32 10.1_ICS 4.04
Click to expand...
Click to collapse
Looks like they missed the top back microphone cutout

jeetS said:
Looks like they missed the top back microphone cutout
Click to expand...
Click to collapse
Thanks for the 'head's up'..when I receive it, I will report back..I haven't received the new device yet, either (PE 64gb)..I have ordered a few different cases, screen protectors, a few colors, of back shells, and a few dbrand skins, so I'm doing research, and orders before the device arrives..I'm not so sure, that the picture is an actual photo, seems to be a rendering, and from eBay is where I took the screen shot..
Thank you..
Exclusive Moto user since 1989..
XT1080M Droid Maxx Developer Edition
http://waynekent.com/page6.html
"Praise Jah" YOU people.!

Yep, I have that case - the microphone cutout is missing. Trying to decide if I should drill one. I don't use a case all of the time.

The initial versions of those cases didn't have the microphone cutout, but the new ones should. My Cimo X Line does have the cutout.

alphabets said:
I second the x case. Bought it on eBay about a month ago and love it.
Click to expand...
Click to collapse
I can't seem to find the X-line cimo case like you have. Can you share the sellers site or name? Thanks.

I did receive the Cimo case today, for the XT1095 I have on order, and Yes..there is a punch out for the top mic. we had questioned..
Here I have the case on my XT1064 Moto G 2014, strikingly similar in size and layout of the Moto X..anyhow..this will give an idea..
Exclusive Moto user since 1989..
XT1080M Droid Maxx Developer Edition
http://waynekent.com/page6.html
"Praise Jah" YOU people.!

tonyguy2000 said:
I can't seem to find the X-line cimo case like you have. Can you share the sellers site or name? Thanks.
Click to expand...
Click to collapse
Sure, it's actually Cimo as the eBay seller. Just select clear or black.... http://m.ebay.com/itm/321584556294?nav=SEARCH
I did however have to make a little hole in the back for the microphone. No big deal, but just a heads up. Maybe ask the seller first if they have one with the hole already cut.

tonyguy2000 said:
I can't seem to find the X-line cimo case like you have. Can you share the sellers site or name? Thanks.
Click to expand...
Click to collapse
You can purchase these cases on Amazon Cimo Cases Moto X 2014 There's a variety of colors to choose from as well.

Related

Video Review: Quibits / Basal Enterprises FlexVue TPU Case

I haven't seen any videos of this case, so I thought I'd put together a quick review for you guys. It's a pretty neat case, I kind of prefer it to the TPU-Cases model, I just wish the top was completely covered.
Also, the title should read "qubits" not "quibits".
Love the video, looks very professional. On a quick note. I wanted to point out that Yoobao has a somewhat similar TPU case with that missing top part that you mention was missing cover.
Here is a link for it:
http://www.ebay.com/itm/22083753113...X:IT&_trksid=p3984.m1439.l2649#ht_4466wt_1110
Again, thank you for the video.
Fixter said:
Love the video, looks very professional. On a quick note. I wanted to point out that Yoobao has a somewhat similar TPU case with that missing top part that you mention was missing cover.
Here is a link for it:
http://www.ebay.com/itm/22083753113...X:IT&_trksid=p3984.m1439.l2649#ht_4466wt_1110
Again, thank you for the video.
Click to expand...
Click to collapse
Thanks for the link! That case looks like a real winner. I might have to purchase it and review it - from the looks of it, it also still has the large Micro-USB cut out.
xSDMx said:
Thanks for the link! That case looks like a real winner. I might have to purchase it and review it - from the looks of it, it also still has the large Micro-USB cut out.
Click to expand...
Click to collapse
Well, I purchased it and received it yesterday. I love the darn thing. The screen protector was cut out for the device, because it has the cut out exactly where the light sensor is. (I also installed and had 0 problems with the installation.)
xSDMx said:
Thanks for the link! That case looks like a real winner. I might have to purchase it and review it - from the looks of it, it also still has the large Micro-USB cut out.
Click to expand...
Click to collapse
I have this Yoobao but I decided I wanted to keep the cheapie kickstand case. I still haven't opened it to test it. I can do that or if you want I can sell it to anyone here for 10bux shipped, if you are in the USA. I posted this in the marketplace, but I do not think many others venture out of the device forums lol
Fixter said:
Well, I purchased it and received it yesterday. I love the darn thing. The screen protector was cut out for the device, because it has the cut out exactly where the light sensor is. (I also installed and had 0 problems with the installation.)
Click to expand...
Click to collapse
How does it fit? Is it really tight? I'm looking for a TPU case because the Tmob case I got when I got the phone is simply way too floppy and loose. That Yoobao you posted is exactly what I'm looking for because I want a clear case to show off the phone's design. If the fit is tight and the cutouts all align nicely I'm purchasing it immediately lol.
To stay on topic, the OP's video looks very professional and I've looked at the Qubits case a lot too.
The Janitor Mop said:
How does it fit? Is it really tight? I'm looking for a TPU case because the Tmob case I got when I got the phone is simply way too floppy and loose. That Yoobao you posted is exactly what I'm looking for because I want a clear case to show off the phone's design. If the fit is tight and the cutouts all align nicely I'm purchasing it immediately lol.
To stay on topic, the OP's video looks very professional and I've looked at the Qubits case a lot too.
Click to expand...
Click to collapse
It fits like a glove, no flimsiness and not loose at all! Every single cutout is made EXACTLY where it needs to be. I was amazed by that.
Thanks for the review. Looks like a better case than the rubber one I got from T-Mobile for $20. The case is too loose around the sides. I already scraped the side with my key. I will be buying one of these TPU's.
Fixter said:
It fits like a glove, no flimsiness and not loose at all! Every single cutout is made EXACTLY where it needs to be. I was amazed by that.
Click to expand...
Click to collapse
1 more question: how long did it take for you to get it? I really want to try it out, but I'm leaving for college in 13 days, so the fact that it's shipping from Hong Kong kinda makes me worried that I wouldn't get it in time.
If in the uk amazon sell the grey one through a seller named "podjunkie" bit the order is fufilled by amazon
Sent from my GT-P1000 using XDA App
That was a great review, thanks! I think I'm going to pick up the smoked one, but I would love if the black one had the middle clear like the smoked one does. Right now I have the Incipio NGP but the open volume rocker and clear center make this very appealing
Sorry for the mega-necro, but I am selling all of my leftover HTC Sensation accessories at very low prices. Please help out a student and check out my marketplace posting.
xSDMx
sent you a prvate msg!
i got similar case ( black , not transparent and slightly different in design) as OP from amazon for $5.99 with free 2 days shipping ( 4 bucks cheaper ^^). This is really good case, fit tight and look awesome. As OP said,only weak point is that this case doesn't cover the top ( i guess they decide to design this way so you can put in/ or take off the case easier. I have similar type of this case for my mytouch 4G, my nexus S and it is a little bit more difficult to take the case off or put it in) This is always my first choice when i buy my phone's case.
http://www.amazon.com/gp/product/B005A2UR4W/ref=oh_o03_s00_i00_details
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
[/IMG]
This is honestly the best case I've ever used. Fits perfectly, adds a nice feel to the phone (I don't feel like it will snap in my hand anymore).
tritran18518 said:
i got similar case ( black , not transparent and slightly different in design) as OP from amazon for $5.99 with free 2 days shipping ( 4 bucks cheaper ^^). This is really good case, fit tight and look awesome. As OP said,only weak point is that this case doesn't cover the top ( i guess they decide to design this way so you can put in/ or take off the case easier. I have similar type of this case for my mytouch 4G, my nexus S and it is a little bit more difficult to take the case off or put it in) This is always my first choice when i buy my phone's case.
http://www.amazon.com/gp/product/B005A2UR4W/ref=oh_o03_s00_i00_details
[/IMG]
[/IMG]
Click to expand...
Click to collapse

Slim Hard Shell

Hi. I'm searching for something like the C740 but for the One X. I know about the Rock Quicksand, but sadly, this isn't available in Austria.
Any ideas? thanks much
nutingut said:
Hi. I'm searching for something like the C740 but for the One X. I know about the Rock Quicksand, but sadly, this isn't available in Austria.
Any ideas? thanks much
Click to expand...
Click to collapse
Fitment is not 100% but it's a very nice case.
http://www.spigen.com/cell-phone/htc/one-x/htc-one-x-ultra-thin-air-series.html
Alternative
http://www.case-mate.com/HTC-One-X-Cases/Case-Mate-HTC-One-X-XL-Barely-There-Cases.asp
Nice, I like the Barely There Case very much, although the camera protection could be improved. Thanks kontra!
Btw. I don't get why HTC won't produce a case like the C740 for the One X? Those buyers are probably their best customers.
nutingut said:
Nice, I like the Barely There Case very much, although the camera protection could be improved. Thanks kontra!
Btw. I don't get why HTC won't produce a case like the C740 for the One X? Those buyers are probably their best customers.
Click to expand...
Click to collapse
No problem. I have the Spigen case so I can't say much about the Case Mate one. The opening for the camera on the Spigen sticks out a bit more so it offers some protection to the lens.
There's a trade off between the two. The case mate fits better but you lose out on lens protection. There's a small gap on the top left and right when I have the Spigen on the phone and the cutout for the flash is misaligned but the case feels really good in your hands and the flash doesn't seem to be affected.
Another option is this which is similar to the case mate.
http://www.incipio.com/HTC-One-X-AT...ATandT-feather-Ultralight-Hard-Shell-Case.asp
On a side note: Having to wait 2 minutes before I can edit my post is really lame...
Here's a thread on the case-mate. There are pictures too of my own HOX sporting a Barely-There (let me know if the pics are broken...I'm at work and I can't see them).
http://forum.xda-developers.com/showthread.php?t=1696165
Because choices are awesome, heres another.
http://www.ebay.com/itm/320931061956?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I've been using this for about a week now and am quite happy with it. I used Nillkin minimal cases on my last 2 phones and this one seems to offer A LITTLE bit more coverage. More than the Case-Mate as well. The edges don.t raise higher than the screen though so a screen protector is a must (one comes with it). Ill share pics if youd like.
stnguyen09 said:
Here's a thread on the case-mate.
Click to expand...
Click to collapse
Thanks stnguyen, looks like you got the case mate for a while now, are you happy so far?
Also, this might be a though question to answer, but do you folks by any chance know of a leader case that might fit the HOX while wearing one of these hardshells?
Think I'm gonna get the Incipio Feather since it gives the best edge protection and it also seems to be made of the same (kinda) material as the C740, which has a really nice feel to it.
Btw, some additional options I found (sorry, not allowed to post links):
* Krusell ColorCover (not enough edge protection)
* Twins Shield Mesh (not enough edge protection and I don't know about the material)
Imo the best slim hard case is the Amzer shellster. I have that and the barely there. They are almost exactly the same except the shellster covers the camera very nicely. Lemme know if you want pics
nutingut said:
Thanks stnguyen, looks like you got the case mate for a while now, are you happy so far?
Also, this might be a though question to answer, but do you folks by any chance know of a leader case that might fit the HOX while wearing one of these hardshells?
Click to expand...
Click to collapse
I got a leather case from best buy. Fits a little snug but works.
nutingut said:
Hi. I'm searching for something like the C740 but for the One X. I know about the Rock Quicksand, but sadly, this isn't available in Austria.
Any ideas? thanks much
Click to expand...
Click to collapse
There's the C704 and C700 from HTC for the HOX
nutingut said:
Thanks stnguyen, looks like you got the case mate for a while now, are you happy so far?
Also, this might be a though question to answer, but do you folks by any chance know of a leader case that might fit the HOX while wearing one of these hardshells?
Click to expand...
Click to collapse
I'm happy with it. I kinda forget it on there half the time. I haven't dropped my phone or anything so I can't comment on impact resistance.
nutingut said:
Think I'm gonna get the Incipio Feather since it gives the best edge protection and it also seems to be made of the same (kinda) material as the C740, which has a really nice feel to it.
Click to expand...
Click to collapse
Stay away from the Incipio Feather. Here is what they claim the cutout for the USB port looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is NOT what the actual case look slike. There is a little strip of plastic running at the top of the USB port cutout which prevents the USB cable from securely plugging into the port.
This is a real PITA and a shame, I am sending the case back to Incipio. I can't understand why the actual design does not match what they sent me, I just ordered a week ago. Perhaps they are selling off old stock, buyer beware!
None of my plugs have a problem snapping into place.
Does anybody know if the spigen case in white matches the white on the HOX? Reason I ask is because I have the white speck case, and it doesn't match at all so I never use it. It's just one of those things that bother me...
Shaddy-Z. said:
Does anybody know if the spigen case in white matches the white on the HOX? Reason I ask is because I have the white speck case, and it doesn't match at all so I never use it. It's just one of those things that bother me...
Click to expand...
Click to collapse
Matches very well.
You kinda sound like me. While the color of the Spigen case looks close to the white on the HOX, the fitment isn't great. It bugs me and I know it'll bug you. Lol.
GroovyGeek said:
Stay away from the Incipio Feather. Here is what they claim the cutout for the USB port looks like:
This is NOT what the actual case look slike. There is a little strip of plastic running at the top of the USB port cutout which prevents the USB cable from securely plugging into the port.
This is a real PITA and a shame, I am sending the case back to Incipio. I can't understand why the actual design does not match what they sent me, I just ordered a week ago. Perhaps they are selling off old stock, buyer beware!
Click to expand...
Click to collapse
False info here the cutouts are fine and work perfectly. This case is my daily driver and I love it.
Sent from my HTC One X using xda premium
ethantarheels123 said:
Imo the best slim hard case is the Amzer shellster. I have that and the barely there. They are almost exactly the same except the shellster covers the camera very nicely. Lemme know if you want pics
Click to expand...
Click to collapse
I wouldn't mind seeing some pics.
Sent from my HTC One X using xda premium
ECEXCURSION said:
I wouldn't mind seeing some pics.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
K I will try to post them later today.
Sent from my HTC One X using xda app-developers app
GroovyGeek said:
Stay away from the Incipio Feather. Here is what they claim the cutout for the USB port looks like:
This is NOT what the actual case look slike. There is a little strip of plastic running at the top of the USB port cutout which prevents the USB cable from securely plugging into the port.
This is a real PITA and a shame, I am sending the case back to Incipio. I can't understand why the actual design does not match what they sent me, I just ordered a week ago. Perhaps they are selling off old stock, buyer beware!
Click to expand...
Click to collapse
You've got some really dry hands.

Cases

http://www.amazon.com/gp/aw/d/B00EOHO9DE
Anyone able to find anything like this? Is the only case tolerable in size.
km8j said:
http://www.amazon.com/gp/aw/d/B00EOHO9DE
Anyone able to find anything like this? Is the only case tolerable in size.
Click to expand...
Click to collapse
I'm actually waiting for the bear motion sand textured cases. I hope they make them for the new phone. I was hoping to snag one before my phone gets here.
sabbotage said:
I'm actually waiting for the bear motion sand textured cases. I hope they make them for the new phone. I was hoping to snag one before my phone gets here.
Click to expand...
Click to collapse
yea i dont mind either the smooth or sand. these are just the only tolerable cases because they are slim and don't make the phones even bigger
I have a hard time not buying a case from rearth. I freaking love their cases, just ordered mine from there.
km8j said:
yea i dont mind either the smooth or sand. these are just the only tolerable cases because they are slim and don't make the phones even bigger
Click to expand...
Click to collapse
I messaged bear motion on Facebook and they said they will be producing cases for the new moto X but they have no ETA at the moment.
Does rearth have one that is like the slim bear motion
I ordered this case and, while I don't normally use cases, I'm very happy with it. I won't have the phone to go with it for a while, but my old Droid DNA fits in it and I can tell that I wouldn't have a problem using the new X with a case on 24/7...really nice feeling, I think it's the curves.
http://www.amazon.com/gp/product/B00ETOEXFG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I also ordered this one too, just in case (for $8 or whatever it's no biggie)..
http://www.amazon.com/gp/product/B00N34V748/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
MYxdaUSERNAME said:
I ordered this case and, while I don't normally use cases, I'm very happy with it. I won't have the phone to go with it for a while, but my old Droid DNA fits in it and I can tell that I wouldn't have a problem using the new X with a case on 24/7...really nice feeling, I think it's the curves.
http://www.amazon.com/gp/product/B00ETOEXFG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I also ordered this one too, just in case (for $8 or whatever it's no biggie)..
http://www.amazon.com/gp/product/B00N34V748/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I ordered the case from your first link too. For only 10 bucks I figured it would hold me over until the bear motion snap on cases come out. My case will be here tomorrow but who knows when the phone will arrive.
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GatorsUF said:
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
Click to expand...
Click to collapse
These all make these giant phones even more giant - so unwieldy
GatorsUF said:
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
Click to expand...
Click to collapse
Given the shape of the Moto X, will a bumper case sufficiently protect the back of the phone, specifically the center? I like the idea of that bumper case, I'm just worried that since the phone tapers around the edges that the fat part of the phone in the middle will be susceptible to scratches and since I'm planning on a wood back that's a no go.
cbsevenfifty said:
Given the shape of the Moto X, will a bumper case sufficiently protect the back of the phone, specifically the center? I like the idea of that bumper case, I'm just worried that since the phone tapers around the edges that the fat part of the phone in the middle will be susceptible to scratches and since I'm planning on a wood back that's a no go.
Click to expand...
Click to collapse
it looks thick enough that it'll raise the phone just a tad bit. i usually lay my phone face down, to protect the display. i am hoping the bumper gives enough lift so the front speaker grills don't get scratched
---------- Post added at 09:17 PM ---------- Previous post was at 09:16 PM ----------
GatorsUF said:
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
Click to expand...
Click to collapse
for the price, it doesn't look too bad. i ordered one myself
km8j said:
These all make these giant phones even more giant - so unwieldy
Click to expand...
Click to collapse
not really. i had a bumper case for my n4, and that did not add much bulk to it. it actually felt good in the hand. i could be totally wrong with this phone though
sabbotage said:
I'm actually waiting for the bear motion sand textured cases. I hope they make them for the new phone. I was hoping to snag one before my phone gets here.
Click to expand...
Click to collapse
^^^ This ^^^
The bear motion cases add very little bulk to the devices and seem to protect the edges very nicely (at least they did on the Gen 1). Hopefully they will offer a 2014 model.
This is appealing... http://www.amazon.com/Acetech-Quality-Motorola-Generation-Protector/dp/B00MWKT4IU/
km8j said:
This is appealing... http://www.amazon.com/Acetech-Quality-Motorola-Generation-Protector/dp/B00MWKT4IU/
Click to expand...
Click to collapse
That looks to be a nillkin case....
The bumper is good. I have it on right now. Yes, it makes it a little thicker, but all cases do. So it'll be the same as having a full body case on
sent from my Moto X (2014)
km8j said:
http://www.amazon.com/gp/aw/d/B00EOHO9DE
Anyone able to find anything like this? Is the only case tolerable in size.
Click to expand...
Click to collapse
Looks like the bear motion cases are in stock now. I just ordered the black, blue and grey versions and it looks like I got the last one of each. It shows back in stock on Oct. 2nd though
Link: http://goo.gl/8ztILB
sabbotage said:
Looks like the bear motion cases are in stock now. I just ordered the black, blue and grey versions and it looks like I got the last one of each. It shows back in stock on Oct. 2nd though
Link: http://goo.gl/8ztILB
Click to expand...
Click to collapse
Ugh, again they cover the dimple. The original was probably the best case I've ever used, but how the hell do they decide to cover the dimple? I actually like the one on the 2nd gen more than the first.
edit: interestingly enough, the back of the phone isn't right in those pics on amazon. the flash isn't correct. here's hoping there's a chance they do have a cutout, even if i doubt it.
mohlsen8 said:
Ugh, again they cover the dimple. The original was probably the best case I've ever used, but how the hell do they decide to cover the dimple? I actually like the one on the 2nd gen more than the first.
edit: interestingly enough, the back of the phone isn't right in those pics on amazon. the flash isn't correct. here's hoping there's a chance they do have a cutout, even if i doubt it.
Click to expand...
Click to collapse
Yeah I'm not sure what phone that is in the photos. It's not even the 1st gen moto X because I have several of those cases and they look nothing like that. I don't mind that they cover the dimple, but to each his own.
I have ReD trims but item is not available until end of october
http://www.amazon.com/gp/product/B00NYXRPO4/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3RZJ9YYQ3ASDK
for now I will use http://www.amazon.com/gp/product/B00LZBJWHK/ref=gno_cart_title_0?ie=UTF8&psc=1&smid=A1OK9R8S7S5URY
---------- Post added at 01:10 AM ---------- Previous post was at 01:08 AM ----------
I dont like when case doesnt cover the edges
km8j said:
This is appealing... http://www.amazon.com/Acetech-Quality-Motorola-Generation-Protector/dp/B00MWKT4IU/
Click to expand...
Click to collapse

Holster case for Naked Moto X 2014

Looks like Seidio isnt making a holster case for the New Moto X. Its a shame because I want to use there holster for my naked moto X. Does anyone know of a holster thats like a seidio spring clip holster. I also need a good glass screen protector.
tempered glass full front protection
Well I can't post links, but if you check out Bodyguardz full screen protectors, they seem to be pretty nice. Also Verizon offers something similar, however it only covers the viewable screen, rather than the entire front like the Bodyguardz one does.
Hope that helps.
srandomuherom said:
Well I can't post links, but if you check out Bodyguardz full screen protectors, they seem to be pretty nice. Also Verizon offers something similar, however it only covers the viewable screen, rather than the entire front like the Bodyguardz one does.
Hope that helps.
Click to expand...
Click to collapse
bodyguardz aren't working well on my device; i've tried two (including one installed by att) and both times the left, right and bottom edges would not stay down. might try the Verizon version since it only covers the screen.
Thanks
Good to know. I was going to pick one up today. I guess i will wait a bit longer for more products to release. Thanks for the heads up.
So I bought a Samsung Galaxy S5 Seidio spring clip holster for the Moto X 2014. It fits perfect. It was like $27 for the holster. No issue at all. The Samsung Galaxy S5 was the only phone in comparision in size to the Moto X 2014. So im rocking a naked sweet Moto X 2014.
That's exactly what i did as well. Got it from here http://www.shopandroid.com/seidio-spring-clip-holster/4A24A17641.htm
bhowell423 said:
That's exactly what i did as well. Got it from here http://www.shopandroid.com/seidio-spring-clip-holster/4A24A17641.htm
Click to expand...
Click to collapse
Same place. I order through them because I have a wholesale account and the cost for stuff is so cheap.
How snug is the fit? Does the X rattle or move around? I have a seidio case and holster on my Atrix HD and I really like then. Was thinking of getting a hydrocell leather case but if the fit is snug I will probably get the S5 holster. Would you be able to snap a picture of the X in the holster? Thanks in advance.
Sent from my MB886 using XDA Free mobile app
It's cheaper on Amazon - http://www.amazon.com/Seidio-Spring-Holster-Samsung-Galaxy/dp/B00JJSPWVG
Pics would be great. I have never seen one of these before. I have always bought the holster similar to what Verizon sells. But with a wood back, I would rather not cover it up.
bhowell423 said:
That's exactly what i did as well. Got it from here http://www.shopandroid.com/seidio-spring-clip-holster/4A24A17641.htm
Click to expand...
Click to collapse
idle0095 said:
Same place. I order through them because I have a wholesale account and the cost for stuff is so cheap.
Click to expand...
Click to collapse
As stated above, I'd love to see a picture. I have the bumper that's sold through Moto. Might try out one for an LG3 since that's a bit bigger (I think) and I may be able to fit it in.
So I returned the holster and got the PT case/clip for the s5 at best buy and the clear case from verizon it fits the moto x with any case. I post pictures once i get home. http://www.bestbuy.com/site/pt-plat...ones/5161574.p?id=1219112464318&skuId=5161574
I received my seido today and it fits the x perfectly. The phone doesn't move around at all. It feels very secure.
[
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ATTACH]2979019[/ATTACH]
Would the seidio fit over the Verizon clear case or would it be too snug?
Sent from my Moto X 2nd Generation
---------- Post added at 08:49 PM ---------- Previous post was at 08:48 PM ----------
bhowell423 said:
So I returned the holster and got the PT case/clip for the s5 at best buy and the clear case from verizon it fits the moto x with any case. I post pictures once i get home. http://www.bestbuy.com/site/pt-plat...ones/5161574.p?id=1219112464318&skuId=5161574
Click to expand...
Click to collapse
So your using the Verizon clear case with the holster?
Sent from my Moto X 2nd Generation
Not sure if you want a slightly different look than a nekkid clip-in type belt-case but these look interesting:
http://www.amazon.com/Motorola-Genu...4272538&sr=8-134&keywords=moto+x+2nd+gen+case
http://www.amazon.com/gp/product/B00NJYNTK2/ref=pd_luc_nr_02_04_t_lh?ie=UTF8&psc=1
I ran across them last night in another futile attempt to find something I want...I might get the vertical style (first link). I think maybe with a basic TPU protective cover it's a serviceable combo for how I use my phone all day, at least until the XT1095 version of my fav case comes out, if ever.
brecklundin said:
Not sure if you want a slightly different look than a nekkid clip-in type belt-case but these look interesting:
http://www.amazon.com/Motorola-Genu...4272538&sr=8-134&keywords=moto+x+2nd+gen+case
http://www.amazon.com/gp/product/B00NJYNTK2/ref=pd_luc_nr_02_04_t_lh?ie=UTF8&psc=1
I ran across them last night in another futile attempt to find something I want...I might get the vertical style (first link). I think maybe with a basic TPU protective cover it's a serviceable combo for how I use my phone all day, at least until the XT1095 version of my fav case comes out, if ever.
Click to expand...
Click to collapse
I have the vertical one in the top link. It's a nice care if you like leather cases. I was used to a siedio car and holster on my atrix. But I'm quickly getting used to sliding the X out of the leather.
Sent from my XT1097 using XDA Free mobile app
Just got myself the Seidio S5 holster the other day. I ordered it based on phone size measurements and then found this thread which confirmed it fit. The only thing I miss compared to the same holster used with my 2013 Moto X is the cutout in the release clip for the headphone jack. I may end up drilling/machining the slot. I did experiment with using the top clip from the 2013 Moto X holster but the phone while secure was able to move around a little which I didn't like. One option would be to add a whee bit of foam which would take care of the problem and then allow for headphones.
It is nice to have a holster again, this phone sure is slippery though!
bhowell423 said:
So I returned the holster and got the PT case/clip for the s5 at best buy and the clear case from verizon it fits the moto x with any case. I post pictures once i get home.
Click to expand...
Click to collapse
I'd love to see pics of this. I'm thinking of doing the same thing. Getting a case with a clear/frosted back and using it in a Seidio S5 holster. I'm just unsure which holster to get as there are a couple models for different thickness of cases.
Given the recent Amazon sale, I'm sure there's a recent surge of 2014 Moto X owners (me included). My 2013 bit the dust recently and I've been using my son's old one (he bought a OnePlus 2), and I jumped on the sale at Amazon. I was very disappointed to see that Seidio never made any 2014 Moto X cases/holsters.
Thanks to this thread, I found that the Galaxy S5 is very close in size to the 2014 Moto X. After a lot of looking around I decided to order the Seidio Dilex holster for the Galaxy S5, and the Incipio DualPro case for the Moto X. The case arrived yesterday and holster arrived today, and I have to say it's a perfect fit. If I didn't know any better I would think they were designed to work together.
Like other have noted, the spring clip blocks access to the headphone jack, but that won't affect me; I never use headphones, and I keep my phone upside down in the holster anyway - it seems much easier than constantly flipping the phone around every time I put it in or remove it from the holster.

Speck cases coming soon! (Pics inside)

Pixel PRESIDIO GRIP Case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.speckproducts.com/google...io-grip-google-pixel-cases/GGL-P-PR-GRIP.html
Pixel XL PRESIDIO GRIP Case
http://www.speckproducts.com/google...ip-google-pixel-xl-cases/GGL-PXL-PR-GRIP.html
Pixel PRESIDIO CLEAR Case
http://www.speckproducts.com/google...io-clear-google-pixel-cases/GGL-P-PR-CLR.html
Pixel XL PRESIDIO CLEAR Case
http://www.speckproducts.com/google...ear-google-pixel-xl-cases/GGL-PXL-PR-CLR.html
I love Speck cases but they need more options. Only two colors for the Pixel XL. Black or Clear.
Pricey!! Good cases though. Just not sure I'll pay that much for a case anymore. Too many cheaper options that are as good
Sent from my SM-G930T using XDA-Developers mobile app
$45 are they on drugs? No thanks Speck. Overpriced garbage.
Got my black one for the XL on order from vzw.com. With my discount it was like $29. I'll post pics when it comes in.
Got the Presidio case in and i like it. It's similar to the old Grip cases that Speck makes. I've attached a few pics with size comparisons to the Moto Z Force and a 1st gen Moto X. Now I just need the phone!! :good:
I like the clear case, however I cannot find anywhere in Canada selling Speck? Amazon.ca only has iphone and speck.com doesn't ship internationally... that stuff drives me ape.
tigercranestyle said:
have to say i'm really surprised with this case. gray/black official google case was very nice but to say it is a lint magnet is an understatement. so i purchased the speck presidio today. you have to see it in person and feel it with your phone in it to appreciate it. it looks pretty clean with the silver xl. can imagine how stealthy it would look with the quite black.
i really can't say one bad thing about the case other than its price. they managed to keep it thin. as a matter of fact, it feels thinner than the clear case that they offer. the buttons offer clicky feedback, it's easy to take on and off, and doesn't scratch like the speck cases of old.
the best thing about this case? when you drop it, it bounces. almost like a rubber ball soft corners help with that). i feel super comfortable and i'm not not as careful when handling the xl now.
had the spigen ultra hybrid, clear speck, official google clear, and official google gray/black. this is easily the best of them all...imo.
:good: :good:
Click to expand...
Click to collapse
Wow really? Good to know. I need a sale though.
tigercranestyle said:
have to say i'm really surprised with this case. gray/black official google case was very nice but to say it is a lint magnet is an understatement. so i purchased the speck presidio today. you have to see it in person and feel it with your phone in it to appreciate it. it looks pretty clean with the silver xl. can imagine how stealthy it would look with the quite black.
i really can't say one bad thing about the case other than its price. they managed to keep it thin. as a matter of fact, it feels thinner than the clear case that they offer. the buttons offer clicky feedback, it's easy to take on and off, and doesn't scratch like the speck cases of old.
the best thing about this case? when you drop it, it bounces. almost like a rubber ball soft corners help with that). i feel super comfortable and i'm not not as careful when handling the xl now.
had the spigen ultra hybrid, clear speck, official google clear, and official google gray/black. this is easily the best of them all...imo.
:good: :good:
Click to expand...
Click to collapse
tigercranestyle said:
yep. not sure how to get a discount though. sometimes with these case manufacturers you can leave an item in the cart and partially go through the purchase process (quit the purchase right before confirming the order) and they'll email you a percentage off. other times of you subscribe to their mailing list they'll give you a percentage off. didn't try it in this instance however. of course getting a discount on it at the vzw store won't happen.
Click to expand...
Click to collapse
Might just give that a go. Thank you!
does anyone have pics of the blue version of the Presidio on the Quite Black XL??
CraigP17 said:
does anyone have pics of the blue version of the Presidio on the Quite Black XL??
Click to expand...
Click to collapse
The blue case is only for the Pixel.
airmaxx23 said:
The blue case is only for the Pixel.
Click to expand...
Click to collapse
https://www.verizonwireless.com/accessories/speck-presidio-grip-case-pixel-xl/
So Verizon's site is wrong then.
CraigP17 said:
https://www.verizonwireless.com/accessories/speck-presidio-grip-case-pixel-xl/
So Verizon's site is wrong then.
Click to expand...
Click to collapse
Possibly, that color is not listed on Speck's website for XL.
http://www.speckproducts.com/google/google-pixel-xl-cases/presidio-grip-google-pixel-xl-cases/GGL-PXL-PR-GRIP.html#start=5
CraigP17 said:
https://www.verizonwireless.com/accessories/speck-presidio-grip-case-pixel-xl/
So Verizon's site is wrong then.
Click to expand...
Click to collapse
They might be, but I bought one anyway lol
Sent from my Pixel XL using XDA-Developers mobile app
airmaxx23 said:
Possibly, that color is not listed on Speck's website for XL.
http://www.speckproducts.com/google...e-pixel-xl-cases/GGL-PXL-PR-GRIP.html#start=5
Click to expand...
Click to collapse
CraigP17 said:
https://www.verizonwireless.com/accessories/speck-presidio-grip-case-pixel-xl/
So Verizon's site is wrong then.
Click to expand...
Click to collapse
I can confirm that this is the blue case for the XL. I got mine in this morning. It looks good.
I'll post a pic later.
Sent from my Pixel XL using XDA-Developers mobile app
madmaverickmatt said:
I can confirm that this is the blue case for the XL. I got mine in this morning. It looks good.
I'll post a pic later.
Sent from my Pixel XL using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my Pixel XL using XDA-Developers mobile app
madmaverickmatt said:
Sent from my Pixel XL using XDA-Developers mobile app
Click to expand...
Click to collapse
i thought i would like the blue on the quite black...and i do. how do you like it overall? not to much bulk?
thanks in advance!
CraigP17 said:
i thought i would like the blue on the quite black...and i do. how do you like it overall? not to much bulk?
thanks in advance!
Click to expand...
Click to collapse
I kind of love it.
I came from the spigen rugged armor and this is a little bigger, but not by much at all. It fits well and it does not seem to add that much bulk over all. Also the keys are responsive to the touch and I think the grips are set into the case a little better. With my last Spec case I had some of the grips peal, this one feels sturdier. It goes on and comes off pretty easy, but it doesn't feel like it's going to fall off. It's definitely my new daily driver.
madmaverickmatt said:
I kind of love it.
I came from the spigen rugged armor and this is a little bigger, but not by much at all. It fits well and it does not seem to add that much bulk over all. Also the keys are responsive to the touch and I think the grips are set into the case a little better. With my last Spec case I had some of the grips peal, this one feels sturdier. It goes on and comes off pretty easy, but it doesn't feel like it's going to fall off. It's definitely my new daily driver.
Click to expand...
Click to collapse
I got my clear case with the Silver XL and it looks great. Coming from a Nexus 6 with no case, it's not too big at all. In fact, after I put the case on this, they're almost the same exact size. Got mine for about $35 after a 25% discount at the Verizon store. I know it's a crazy amount of money, but the case is great.
I got the Black Presidio on ebay. New In Box $19.99 when Speck and Verizon charge $45. Wish they had the blue though. I think it looks good with the quite black

Categories

Resources