******UPDATE FIX YOUR T337A WITH LOLIPOP FRIMWARE FILE******* I do not take credit for this file at all, all credit goes to MichaelSaya. Here is a direct quote from him "Here is the link to my Google drive with the Official Lollipop Firmware for the AT&T TAB 4, SM-T-337-A https://mega.nz/#!0Q4AXQgZ!Df-pTUo6eA80kGTrzpYCAJ0ilGbUzMYCE4nRtvume6s Place in AP slot in Odin and flash. Be aware that many have been bricked. Only root with Kingroot and when you reboot, you will lose root. Simply re-root with Kingroot and you will be fine. DO NOT REPLACE KINGROOT WITH SUPERSU!!!!! YOU WILL BRICK!!!!! But we have the firmware now so we can now play around knowing that if we mess something up, we can fix it."
I found a way to re-root the t337a with the latest OTA NK2. Not sure if I was the only one in this boat or whatever but I got bored and started experiment. First thing i did was Flash the older NF4 kernel with ODIN. Put this in the PDA slot and flash! It was successful, I downloaded Towel root, and bam! Root working again ! Cheers!
Tutorial:
1. Get the latest drivers to make sure everything goes smooth http://org.downloadcenter.samsung.c...NG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe
2. Get Odin if you don't have it yet: http://forum.xda-developers.com/attachment.php?attachmentid=1168421
3. Download the NF4 kernel from the attachment below
4. Go into Odin.
5. Click on PDA, search for the file you downloaded boot.tar and select it. Pic: http://i.imgur.com/XrqVPLZ.png
6. Now, put your tablet into download mode! If you don't know how to enter download mode go here: https://www.youtube.com/watch?v=dDE1oB2-nYw its the s5 but same concept.
7. Plug in your tablet and it should say something like this in message window in odin: http://i.imgur.com/uWFc4YX.png
8. Now, hit start. Let the process run. If all goes well it should say RESET! I dont know what happened to this pic lol http://i.imgur.com/AbH5qW7.png but hopefully you get the point.
9. Give the tablet a few minutes to boot. Keep it plugged in until you see PASS! http://i.imgur.com/eTuHDUl.png
10. Go get towel root. Run it. And BAM! You are rooted again
*** WARNING *** This doesn't work with the lolipop update. I have tried to downgrade my tablet and it did softbrick it. Do not try to downgrade your tablet/try this method if you are running lolipop 5.1.1. This only works on kitkat. HOWEVER. I have the lolipop boot.tar. Use the instructions above to unbrick your tablet (This will not give you root access. I'm going to look at it and see if I can figure something out to get root access). I have not tested this myself because mine is at a friends house BUT this should work. Cheers
CocaFoca said:
I found a way to re-root the t337a with the latest OTA NK2. Not sure if I was the only one in this boat or whatever but I got bored and started experiment. First thing i did was Flash the older NF4 kernel with ODIN. Put this in the PDA slot and flash! It was successful, I downloaded Towel root, and bam! Root working again ! Cheers!
Download link: Below
Click to expand...
Click to collapse
Hi,
Neat ! so if the older kernel was compiled before towel root's october deadline [i think it was october] when that vulnerability
was closed then that would make sense. :good:
so the rom run just fine with the older kernel ?
could you post the older NF4 kernel/boot.img and modules ?
thanks
m
Absolutely! Heres the thing. I cant post links yet. Is there anyway i can pm itnto you and idk you set up a post? Or is there another way
June.
Sent from my XT907 using XDA Free mobile app
moonbutt74 said:
Hi,
Neat ! so if the older kernel was compiled before towel root's october deadline [i think it was october] when that vulnerability
was closed then that would make sense. :good:
so the rom run just fine with the older kernel ?
could you post the older NF4 kernel/boot.img and modules ?
thanks
m
Click to expand...
Click to collapse
So I put the kernel/boot.img in a attachment. Yes everything runs very smooth. Especially after all the frozen bloatware! Anyways happy rooting !
Also attatched is a screenshot with me rooted/on NK2 with the NF4 kernel!
CocaFoca said:
So I put the kernel/boot.img in a attachment. Yes everything runs very smooth. Especially after all the frozen bloatware! Anyways happy rooting !
Also attatched is a screenshot with me rooted/on NK2 with the NF4 kernel!
Click to expand...
Click to collapse
Yup that'll do it. Good deal on getting that sorted, thanks!
and to pm click on the user's name and select send private message.
be sure to reply to this message to bring your post count up x1
m
YES!
CocaFoca said:
I found a way to re-root the t337a with the latest OTA NK2. Not sure if I was the only one in this boat or whatever but I got bored and started experiment. First thing i did was Flash the older NF4 kernel with ODIN. Put this in the PDA slot and flash! It was successful, I downloaded Towel root, and bam! Root working again ! Cheers!
Download link: Below
Click to expand...
Click to collapse
Hey man this is just what iv been looking for, i have a sm-t337a and would love root. if you could help i would appreciate it, if you could provide a tutorial or where to get the older NF4 kernel. :good::good::good:
amdtabv said:
Hey man this is just what iv been looking for, i have a sm-t337a and would love root. if you could help i would appreciate it, if you could provide a tutorial or where to get the older NF4 kernel. :good::good::good:
Click to expand...
Click to collapse
I added a tutorial! Happy rooting!
Fails in Odin
Followed the instructions, but it keeps failing. Any ideas?
Carl
CarlDinAZ said:
Followed the instructions, but it keeps failing. Any ideas?
Carl
Click to expand...
Click to collapse
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do
CocaFoca said:
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do[/QUOTE
Screen shots attached. Thanks for helping.
Click to expand...
Click to collapse
CarlDinAZ said:
Screen shots attached. Thanks for helping.
Click to expand...
Click to collapse
You've got the wrong device. This is for the T337A, not the T537A.
Sent from my SM-N900V using Tapatalk
CarlDinAZ said:
CocaFoca said:
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do[/QUOTE
Screen shots attached. Thanks for helping.
Click to expand...
Click to collapse
Yeah you indeed do have the wrong device, however if you want i can upload the NE1 kernel (first kernel for the t537a). However... i have not tested it for this device. It should be the same concept but im not 100 percent sure it will work. Do you want to at least try? Ill post it in my next reply if you are interested in giving it a go.
Click to expand...
Click to collapse
CocaFoca said:
CarlDinAZ said:
Yeah you indeed do have the wrong device, however if you want i can upload the NE1 kernel (first kernel for the t537a). However... i have not tested it for this device. It should be the same concept but im not 100 percent sure it will work. Do you want to at least try? Ill post it in my next reply if you are interested in giving it a go.
Click to expand...
Click to collapse
Sure - I will give it a try.
Click to expand...
Click to collapse
CarlDinAZ said:
CocaFoca said:
Sure - I will give it a try.
Click to expand...
Click to collapse
Hey Man. I got that boot.tar from the T537A. Follow the instructions the same way except use this boot.tar. Hope it works. If it does, I'll add it to the tutorial. Let me know how it goes! PLEASE ONLY FLASH THE FOLLOWING ATTACHMENT IF YOU HAVE THE T537A! I re named the file but somebody might not read.
Click to expand...
Click to collapse
CocaFoca said:
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do
Click to expand...
Click to collapse
CocaFoca,
hi, this is off-topic but, do you have a working recovery for the 337a yet? Or a lead on unlocking it?
I've alternately tried to mod safestrap and actually build it from what sources Hashcode had up
but no dice.
on the odin image, it may have been packed wrong,
run this script in the same directory as the boot.img
#!/bin/bash
tar -H ustar -c boot.img > boot.tar
md5sum -t boot.tar >> boot.tar
mv boot.tar boot.tar.md5
odin complains about the md5 sometimes so you can skip
the last line, it will still flash.
m
moonbutt74 said:
CocaFoca,
hi, this is off-topic but, do you have a working recovery for the 337a yet? Or a lead on unlocking it?
I've alternately tried to mod safestrap and actually build it from what sources Hashcode had up
but no dice.
on the odin image, it may have been packed wrong,
run this script in the same directory as the boot.img
#!/bin/bash
tar -H ustar -c boot.img > boot.tar
md5sum -t boot.tar >> boot.tar
mv boot.tar boot.tar.md5
odin complains about the md5 sometimes so you can skip
the last line, it will still flash.
m
Click to expand...
Click to collapse
I unfortunately do not. I do believe I know why safestrap isnt workin SElinux wont disable at all for me... Tried booting safestrap for different att phones and it woulndt stick always said not active. I believe we need to find a way to make it permissive then it will work? Tried the one on the market didnt work. I did get one to make it permissive but it reset after reboot :/ im just a newbie at this stuff but tbh I want to learn. Anyways... Im interested in this... Will look into it tomorrow
CocaFoca said:
I unfortunately do not. I do believe I know why safestrap isnt workin SElinux wont disable at all for me... Tried booting safestrap for different att phones and it woulndt stick always said not active. I believe we need to find a way to make it permissive then it will work? Tried the one on the market didnt work. I did get one to make it permissive but it reset after reboot :/ im just a newbie at this stuff but tbh I want to learn. Anyways... Im interested in this... Will look into it tomorrow
Click to expand...
Click to collapse
Coca,
ok you may need selinux enabled busybox, check this thread, http://forum.xda-developers.com/and...de-busybox-snapshot-building-android-t2857650 , the OP is a good read the links are a ways down, i've tested out both versions and they seem square.
my last thought is to replace the two distinct busybox binaries in safestrap, busybox and bbx, my attempts with safestrap
end up rebooting to my actual recovery if that provides a lead. the version i chose for modding was Galaxy S4 (ATT) [JFLTEATT]
http://blog.hash-of-codes.com/downloads/safestrap/
CocaFoca said:
CarlDinAZ said:
Hey Man. I got that boot.tar from the T537A. Follow the instructions the same way except use this boot.tar. Hope it works. If it does, I'll add it to the tutorial. Let me know how it goes! PLEASE ONLY FLASH THE FOLLOWING ATTACHMENT IF YOU HAVE THE T537A! I re named the file but somebody might not read.
Click to expand...
Click to collapse
I'm not sure what happened CarlDinAZ but I had the same specs on my Tab 4 I just got through an upgrade from AT&T and after following the tutorial by Coca using the boot.tar he provided for the T537A and then rooting with towelroot I can confirm that it does work for this model.
Thanks for the boot.tar and tutorial Coca!
Click to expand...
Click to collapse
moonbutt74 said:
CocaFoca,
hi, this is off-topic but, do you have a working recovery for the 337a yet? Or a lead on unlocking it?
I've alternately tried to mod safestrap and actually build it from what sources Hashcode had up
but no dice.
on the odin image, it may have been packed wrong,
run this script in the same directory as the boot.img
#!/bin/bash
tar -H ustar -c boot.img > boot.tar
md5sum -t boot.tar >> boot.tar
mv boot.tar boot.tar.md5
odin complains about the md5 sometimes so you can skip
the last line, it will still flash.
m
Click to expand...
Click to collapse
Just had a had a thought, maybe we could tweak a twrp version for say the t-mobile version and try to code safestrap into that and make it boot on our t337a? Recently had the need for a recovery and I want to help get it working! Do you think there is any chance with the one linked here?: http://forum.xda-developers.com/tab-4/general/sm-t235-lte-rooted-twrp-2-8-alpha1-sm-t3027059
Related
First of all thanks to samfirmware. Odin this to get odexed stock EH06 with the purple CWM 3.1.0.1, latest root and su binary and Busybox 1.19.
I forgot to meantion that two apps were removed to make room for busybox. The two apps are Asphalt Demo and Free HD Games Demo. I have attached them to the OP since Zeinzu asked about it.
Odin tar:
MD5: fd0d38e0878855981c5cc373af63f27d
http://www.multiupload.com/AY4LTAK9UO
Odin 1.85 including instructions:
MD5: 7f574b567aa420e36c127d27e180a3f9
http://www.multiupload.com/W4AOLDRP52
thanks for this!
omair2005 said:
thanks for this!
Click to expand...
Click to collapse
No problem. I hate being a day behind though.
crawrj said:
No problem. I hate being a day behind though.
Click to expand...
Click to collapse
Who care's your still the first =P that's all pple will remember.
Thanks like alway crawrj.. are u gonna release the browser deodexed fix? Before buncha users keep asking.
Sent from my Epix 4G using XDA
Ahhh thank you!
I always wait for your .tar before I test the new GB builds.
Shoulon said:
Who care's your still the first =P that's all pple will remember.
Thanks like alway crawrj.. are u gonna release the browser deodexed fix? Before buncha users keep asking.
Sent from my Epix 4G using XDA
Click to expand...
Click to collapse
Yes I will be doing that. Probably sometime tonight.
darkierawr said:
Ahhh thank you!
I always wait for your .tar before I test the new GB builds.
Click to expand...
Click to collapse
You are welcome and thanks.
crawrj said:
First of all thanks to samfirmware. Odin this to get odexed stock EH06 with the purple CWM 3.1.0.1, latest root and su binary and Busybox 1.19.
Odin tar:
http://www.multiupload.com/AY4LTAK9UO
Odin 1.85 including instructions:
http://www.multiupload.com/W4AOLDRP52
Click to expand...
Click to collapse
Thanks for this, because the tar is not zipped there is no self check in place to make sure the file is in tact from the download.
Could you please post an MD5 checksum of the original that you uploaded so we can verify it before we flash?
formula84 said:
Thanks for this, because the tar is not zipped there is no self check in place to make sure the file is in tact from the download.
Could you please post an MD5 checksum of the original that you uploaded so we can verify it before we flash?
Click to expand...
Click to collapse
You got it. It is by the download link.
crawrj said:
Yes I will be doing that. Probably sometime tonight.
Click to expand...
Click to collapse
Does this mean a full deodexed tar release?
odub303 said:
Does this mean a full deodexed tar release?
Click to expand...
Click to collapse
Yeah that will come first.
Sent from my SPH-D700 using XDA Premium App
Flashed and everything work... will get back on how efficient everything is including the ROM + EH06 modem...
Thanks! Love it, works great!
I'm kinda confused here. What do i need to do first? Flash or Odin... and when i open odin i dont see any .tar file. Can someone point me in the right direction. Sorry bout my ignorance. Thanks.
csrohena said:
I'm kinda confused here. What do i need to do first? Flash or Odin... and when i open odin i dont see any .tar file. Can someone point me in the right direction. Sorry bout my ignorance. Thanks.
Click to expand...
Click to collapse
You only need to odin. There is no flashing. You need to download the tar file from the op and follow these basic instructions for flashing the tar file.
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Open odin
2. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold 1 on the keyboard while powering up)
3. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
4. The only box that should be checked is Auto Reboot.
5. You do not need to choose a pit file.
6. In the PDA Section choose the tar file. (Should be the sph-d700-****-8Gb-REL.tar)
7. Hit start. It will do its thing.
8. If it fails than try a new cable.
9. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.
Is there a way to create an ODIN file for our personalized system? Like a Nandroid backup except Odinable.
ort84 said:
Thanks! Love it, works great!
Click to expand...
Click to collapse
+1. .. just flashed this on my sister's phone and everything's working great. She's actually getting decent battery life now too (coming from a very early froyo release). Thanks OP!
Sent from my SPH-D700 using Tapatalk
Great work!!
Cool to see that all of the goodies are already incorporated into the tar file so all we have to do is just ODIN it and we're done. Root and CWM Purple are already there.
Sweet!!
Loving it!
Thanks for all the hard work.
Now have to change the start up and shut down animation files. Hee hee
Darkk
For some reason I don't recall seeing a tar file in the zip. I will have to double check. And I wull obviously have to root after said process correct? I am trying this on the lady's phone. So I appreciate the help.
Sent from my Photon via XDA
---------- Post added at 09:10 AM ---------- Previous post was at 08:38 AM ----------
Okay, so I double checked, and no tar file. But I see a couple bin files. Just so I am clear. we are supposed to unzip this correct? And use it via Odin? I'm not too familiar with the Epic, I'm used to flashing things via recovery on my Photon. So I'm trying to learn as I go. Appreciate all the help everyone.
xTMFxOffshore said:
For some reason I don't recall seeing a tar file in the zip. I will have to double check. And I wull obviously have to root after said process correct? I am trying this on the lady's phone. So I appreciate the help.
Sent from my Photon via XDA
---------- Post added at 09:10 AM ---------- Previous post was at 08:38 AM ----------
Okay, so I double checked, and no tar file. But I see a couple bin files. Just so I am clear. we are supposed to unzip this correct? And use it via Odin? I'm not too familiar with the Epic, I'm used to flashing things via recovery on my Photon. So I'm trying to learn as I go. Appreciate all the help everyone.
Click to expand...
Click to collapse
The file is already a tar. You just download and odin it.
Sent from my SPH-D710 using xda premium
First of all thanks to samfirmware. Odin this to get odexed stock EH17 with the purple CWM 3.1.0.1, latest root and su binary and Busybox 1.19.
Removed Asphalt Demo to make space for Busybox. Attached if you really want it.
Odin tar:
MD5: 417acf5bc49568fc3ca5505d04e9eed8
http://dev-host.org/gf9qor3y1btg/Odexed-Rooted-CWM-Busybox-EH17.tar
Odin 1.85 including instructions:
MD5: 7f574b567aa420e36c127d27e180a3f9
http://www.multiupload.com/W4AOLDRP52
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Extract the contents of the zip file to a folder
2. Open odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold 1 on the keyboard while powering up)
4. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
5. The only box that should be checked is Auto Reboot.
6. You do not need to choose a pit file.
7. In the PDA Section choose the tar file. (Should be the sph-d700-****-8Gb-REL.tar)
8. Hit start. It will do its thing.
9. If it fails than try a new cable.
10. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.
Awesome thanks .. Cant wait
crawrj said:
First of all thanks to samfirmware. Odin this to get odexed stock EH17 with the purple CWM 3.1.0.1, latest root and su binary and Busybox 1.19.
Odin tar:
MD5: Coming Soon
http://Coming Soon
Odin 1.85 including instructions:
MD5: 7f574b567aa420e36c127d27e180a3f9
http://www.multiupload.com/W4AOLDRP52
Click to expand...
Click to collapse
Thanks, do you have a way to monitor download numbers? If so I am sure samfirmware would be interested to know just how many Epic users use their leaks...hence why they requested no mirrors for the files they posted to get a count. I know if i had not flashed yet and I had an option I would flash your awesome AIO tar... Thanks for all your work!
formula84 said:
Thanks, do you have a way to monitor download numbers? If so I am sure samfirmware would be interested to know just how many Epic users use their leaks...hence why they requested no mirrors for the files they posted to get a count. I know if i had not flashed yet and I had an option I would flash your awesome AIO tar... Thanks for all your work!
Click to expand...
Click to collapse
Unfortunately I don't have my own service I just use multiupload which doesn't give a count. If someone wants to mirror it to get a count or point me to a free service that will work I will be happy to do it.
I've been downloading theirs anyway each release to show support.
The Root said:
I've been downloading theirs anyway each release to show support.
Click to expand...
Click to collapse
That's a good idea. I am downloading from SamFirmware but will be using this one.
Sent from my SPH-D700 using xda premium
If anyone has just the modem yet, I'd like to try that, as well.
Saweeeeeeet. Looking forward to it .
Link is up.
crawrj said:
Link is up.
Click to expand...
Click to collapse
Awesome... now just waiting for deodex version..
crawrj said:
Unfortunately I don't have my own service I just use multiupload which doesn't give a count. If someone wants to mirror it to get a count or point me to a free service that will work I will be happy to do it.
Click to expand...
Click to collapse
Use this: http://dev-host.org/
It shows the number of downloads when you go to download it. You start off with 20 GB I think.
Thanks your the best. I would love to see your mutt theme for this if you ever get a chance to mess with it.
crawrj said:
Unfortunately I don't have my own service I just use multiupload which doesn't give a count. If someone wants to mirror it to get a count or point me to a free service that will work I will be happy to do it.
Click to expand...
Click to collapse
dev-host.org
|| Acer || said:
Use this: http://dev-host.org/
It shows the number of downloads when you go to download it. You start off with 20 GB I think.
Click to expand...
Click to collapse
Do you have to create an account to get an additional features or will just the free upload work?
ilostmypistons said:
Thanks your the best. I would love to see your mutt theme for this if you ever get a chance to mess with it.
Click to expand...
Click to collapse
No problem I might port it over depending on how the rumors go for an official update.
I look forward to a deodexed version with AIO as well once that gets around. I feel like EH18 will be the official since they never leak the official. But this will hopefully stop the memory leaks and random reboots.
crawrj said:
Do you have to create an account to get an additional features or will just the free upload work?
Click to expand...
Click to collapse
I recommend just making an account. It's free and I'm guessing you won't go past 20 GB.
If you don't register, then you only get 1 GB.
Only cost $5.00 on PayPal for a donate version for a year which gives you a few more benefits.
Thanks for this!
Sent from my SPH-D700 using Tapatalk
I have no idea why this Epic is randomly rebooting. But it's really inconvenient.
http://dl.dropbox.com/u/266817/ocs.android.72727.log
that was what popped up on the sdcard. I can't figure out how to read it. I am assuming that's the file the phone is creating when it reboots **RANDOMLY** several times a day.
if you can't read that, tell me how I can get the log that the phone SHOULD be creating when it reboots randomly... or a way to figure out why it's going this.
So this is still leak right? Not an official release yet?
| ★ UPDATE.ZIP ★ | ►MF3★AT&T★MK2◄ | ★ UNBRICKED ★ METHOD ★ | ★ Jan.01.2014 ★ |
Hi guys, i got this files from someone that have a friend that work at Best Buy Samsung Experience Shop.....and because his phone won't take an OTA update so his friend hooked him up with this flashable update.zip......BEWARE !!!! I DID NOT TRY THIS YET !!!! BUT ALOT OF PEOPLE CONFIRMED THIS WORK.......U NEED TO BE ON STOCK 4.2.2 MF3 FIRMWARE WITH STOCK RECOVERY.....AND FLASH THIS UPDATE.ZIP TO UPDATE TO MK2 FIRMWARE.....OR..... ADB SIDELOAD...... SEE POST#2 FOR GUIDE ON HOW TO UPDATE......IF DOESN'T WORK YOU CAN ALWAYS GO BACK TO STOCK MF3 BY FLASHING MF3.TAR FILES BELOW...... AND IF DOES WORK USE THIS NEW SAFEROOT_METHOD TO ROOT MK2.....SO PLEASE BE CAREFUL IF U WILLING TO TRY AND HIT THANKS BUTTON IF DOES WORK..... ALSO U CAN USE THIS MF3>MK2 UPDATE.ZIP TO UNBRICKED MK2 PHONE WITH MF3-EMERGENCY.TAR INSTALLED FIRST..... SEE ATTACHED FILES BELOW AND GUIDE HOW TO FROM gtj0 THAT I EDITED ON POST#3....
IF U COMING FROM MF3 :
DOWNLOAD >>>MF3>MK2<<< HERE
md5= 7a5119f4c60bcfb26e1a7c69e0f8d9dc
IF U COMING FROM MJ9 :
DOWNLOAD >>>MJ9>MK2<<< HERE
md5= c76a83882fff76f4c718e939ddfb5333
PLEASE THANK mqlin FOR ORIGINAL DOWNLOAD LINK FOR MJ9>MK2
FLASH THIS VIA ODIN TO GET BACK TO STOCK MF3 :
MF3.TAR
md5= 6e266b0e6e4e37f763d75cdae8589e0d
ORIGINAL MF3.tar POST
NighthawkXL said:
They look legit, but it's for normal recovery mode not Odin in case anyone was trying to do that.
Here's the file tree if anyone is interested, and doesn't want to download it...
Click to expand...
Click to collapse
FILE TREE
gsmith2278 said:
Cool! Sounds great. Yeah I did it myself and went from mf3 to Mk2 then re rooted it.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
bennyboy78 said:
I was on MF3, I figured it out now. I had to Odin back to MF3 stock because I had deleted some ATT crap apps so it was causing the system to be modified. After that I just updated with this no problem
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
aaahmedaaa said:
brother you are the man 4.3 i337ucuemk2!!.thank you aloooottttt
Click to expand...
Click to collapse
Awesome.....:good:
| ★GUIDE★HOW★TO★ | ★UPDATE★ | ★Dec.30.2013★ |
| ★GUIDE★HOW★TO★ | ★UPDATE★ | ★Dec.30.2013★ |
In order for me to help u ....i need to know from which part that u don't understand.....as per XDA rules u need to READ before posting ....... STOCK phone is always recommended ......let's start with the easier way:
1. Put update.zip in your Sd Card
2. Reboot phone to recovery by power off your phone. Use combo Button ( VolUp+Home key+Power button) hold them together and when u feel vibration let go power button while still holding VolUP and Home key .....and then u would see samsung galaxy S4 black splash screen and small tiny reboot recovery..... on top left and u can let go both Vol Up and Home key......that's should bring u to android stock recovery.
3. choose apply update from external sd card.......yes to confirm ...... and reboot system when is done or it might reboot automatic.....Woollaa.....now u have 4.3 android MK2 firmware
But If doesn't work you need do these following in order for u to do adb sideload command:
4. U need Samsung USB driver install to your PC ......Install SAMSUNG KIES and plug your phone, it will install latest driver for your phone
5. Make sure u unable USB debugging mode on ur phone.....go to menu>settings>more> it should be on top of about device
( Developer options ) but if u dont have it go to about device and click build number 4/5 time....so that will unable developer options and CHECK USB DEBUGGING.
6. Make sure u have latest ADB ( Android Debugging Bridge ) version 1.0.31.... ANDROID SDK
7. Reboot to recovery>Apply Update From ADB....
8. Go to your PC>>>ADB folder>Shift+Right Click>Open Command Window Here
Code:
[B][COLOR="Red"]adb devices[/COLOR][/B]
Code:
[B][COLOR="Red"]adb sideload update.zip[/COLOR][/B]
Well u might already knew all these step.......and hopefully this will get u to start.... if not, please PM me if u need anymore help.....
Click to expand...
Click to collapse
| ★MK2 ★ UNBRICKED ★ METHOD ★ | ►AT&T★MK2★TAR◄ | ★Jan.23.2014★ |
| ★MK2 ★ UNBRICKED ★ METHOD ★ | ►AT&T★MK2★TAR◄ | ★Jan.23.2014★ |
MK2_UNBRICKED_METHOD_(HARD-BRICKED)
FOLLOW THE GUIDE FROM gtj0 THAT I EDITED BELOW, PLEASE USE MF3>MK2 UPDATE.ZIP FROM OP IF U BRICKED FROM MK2 TO GET BACK TO STOCK MK2 AND PLEASE DONT FORGET THANK HIM ALSO....
gtj0 said:
OK, If you're stuck with an incomplete flash, here are some steps you can try to get to MJ9...
These instructions assume you started with MJ6.
First, make sure you can boot into recovery. If not, download and apply the MJ6 recovery.
recovery-mj6.tar.md5
It should apply without error. If not, report the failure.
Download and extract the following files...
mf3-emergency-part-1.tar.md5.7z .....>>>>>MIRROR<<<<<.....
mf3-emergency-part-2.tar.md5.7z .....>>>>>MIRROR<<<<<.....
If you don't already have it, download the mf3-mj9 update file...
update-mf3-mj9.zip
Start Odin, connect your phone and boot into Download mode.
Flash mf3-emergency-part-1.tar.md5 which contains modem.bin, NON-HLOS.bin and system.img.ext4.
The flash of system.img.ext4 WILL FAIL at the end. That's OK.
Force Reboot the phone back into Download mode (Voldown+Home+Power) and restart Odin.
Flash mf3-emergency-part-2.tar.md5 which contains cache.img.ext4.
The flash WILL FAIL at the end. That's OK.
Force Reboot the phone back into Download mode (Voldown+Home+Power) and restart Odin.
The phone should now reboot to a black screen with the pulsing notification LED.U need to install recovery-mj6.tar.md5 or i337MK2stockRecovery.tar.md5 (also confirmed work with some users) via ODIN first if u stuck between step 6 and 7 since u are on DOWNLOADING MODE....and then force reboot to get u back to recovery if u coming from MK2 by using combo button (VolUp+Home+Power) or use this Odin Force Reboot .tar File to reboot
Reboot into recovery mode and choose apply update via adb and open your adb command from computer and use MF3>MK2 update zip files from OP .....HOPE THIS HELP......
Code:
adb sideload update.zip
I recommend sideloading instead of flashing from sdcard because the sdcard method reboots the phone whether the update was successful or not and you lose the error messages.
Reboot the phone and let it initialize.
You should now have MK2. and last step is to Hit THANK button......
Click to expand...
Click to collapse
FOR >>>>>MK2 FULL ODIN FILES<<<<<
Downloading the file seems to be the whole 728MB Rom file and not just the small file to update from MJ9 to MK2, so I'd love to know if you know if this will just update after flashed or if it wipes all your data, I just created a new thread asking for something like this and explaining why I don't want to wipe and just prefer to Update.
If someone can confirm if flashing this will just update without wiping I'd appreciate it, thanks in advance.
erasat said:
Downloading the file seems to be the whole 728MB Rom file and not just the small file to update from MF3 to MK2, so I'd love to know if you know if this will just update after flashed or if it wipes all your data, I just created a new thread asking for something like this and explaining why I don't want to wipe and just prefer to Update.
If someone can confirm if flashing this will just update without wiping I'd appreciate it, thanks in advance.
Click to expand...
Click to collapse
I definitely remember the official MK2 OTA from at&t was over 700MB when I got it, so the size seems right. Plus full TW Roms are usually >1GB anyway.
adb sideload and it should just update and not wipe, but can't confirm this myself - already on mk2.
prisonnet said:
I definitely remember the official MK2 OTA from at&t was over 700MB when I got it, so the size seems right. Plus full TW Roms are usually >1GB anyway.
adb sideload and it should just update and not wipe, but can't confirm this myself - already on mk2.
Click to expand...
Click to collapse
OK, I'm just saying that the Full MK2 that I downloaded a couple of weeks ago, the one to update from 4.2.2 to MK2 skipping MJ9 was that size, and I've read that the OTA update for the people already on MJ9 was 25 or 28MB, just a small update.
erasat said:
OK, I'm just saying that the Full MK2 that I downloaded a couple of weeks ago, the one to update from 4.2.2 to MK2 skipping MJ9 was that size, and I've read that the OTA update for the people already on MJ9 was 25 or 28MB, just a small update.
Click to expand...
Click to collapse
I think you're right, the MJ9 to MK2 was a small one but didn't you say you're on MF3 now? So this would be the file you need to get to MK2. And I'm almost positive this won't wipe data if you adb sideload, googling seems to confirm.
erasat said:
Downloading the file seems to be the whole 728MB Rom file and not just the small file to update from MF3 to MK2, so I'd love to know if you know if this will just update after flashed or if it wipes all your data, I just created a new thread asking for something like this and explaining why I don't want to wipe and just prefer to Update.
If someone can confirm if flashing this will just update without wiping I'd appreciate it, thanks in advance.
Click to expand...
Click to collapse
Seem to me it just an update patch. ....u can always back up your data... messages. ..etc using Titanium Backup. ....
SWYPED_FROM_S4_MF3_REDVENOM
prisonnet said:
I think you're right, the MJ9 to MK2 was a small one but didn't you say you're on MF3 now? So this would be the file you need to get to MK2. And I'm almost positive this won't wipe data if you adb sideload, googling seems to confirm.
Click to expand...
Click to collapse
You are right, and it was my bad, a typo, I meant that I'm at MJ9 now. I fixed my previous post now to avoid further confusion.
---------- Post added at 10:44 AM ---------- Previous post was at 10:38 AM ----------
ted77usa said:
Seem to me it just an update patch. ....u can always back up your data... messages. ..etc using Titanium Backup. ....
SWYPED_FROM_S4_MF3_REDVENOM
Click to expand...
Click to collapse
Problem is that I'm not root now, to be honest, this is a phone that is paid by my Company and I wasn't suppose to do anything with it, so when I decided to jump from 4.2.2 to 4.3 I knew that it was going to cost me the Root, but I decided that I needed to do it anyways, so for now, until further notice, I won't root.
So as you can see my phone is completely Stock, and I'm still getting the Software Interrupted error every time I try to update via OTA, so I don't see any other option but to try to sideload this update, problem is that without Titanium Backup, I will lose all my Data and I'm not willing to go though all the pain to restore all of it from scratch. So my mind is set just to do what I need to just Update without wiping.
So, if anybody try this, please, can you let us know here if you lose your data or if it just updates. Thanks a lot.
---------- Post added at 10:55 AM ---------- Previous post was at 10:44 AM ----------
OK Just to satisfy my curiosity, I downloaded the whole file again, and try to sideload it on my MJ9 phone and it immediately error out, this file seems to be the same than the other one in the other thread, it will work only only if you are on 4.2.2. So for me and anybody else trying to update from 4.3 MJ9 to MK2, it's still a no go.
erasat said:
You are right, and it was my bad, a typo, I meant that I'm at MJ9 now. I fixed my previous post now to avoid further confusion.
---------- Post added at 10:44 AM ---------- Previous post was at 10:38 AM ----------
Problem is that I'm not root now, to be honest, this is a phone that is paid by my Company and I wasn't suppose to do anything with it, so when I decided to jump from 4.2.2 to 4.3 I knew that it was going to cost me the Root, but I decided that I needed to do it anyways, so for now, until further notice, I won't root.
So as you can see my phone is completely Stock, and I'm still getting the Software Interrupted error every time I try to update via OTA, so I don't see any other option but to try to sideload this update, problem is that without Titanium Backup, I will lose all my Data and I'm not willing to go though all the pain to restore all of it from scratch. So my mind is set just to do what I need to just Update without wiping.
So, if anybody try this, please, can you let us know here if you lose your data or if it just updates. Thanks a lot.
---------- Post added at 10:55 AM ---------- Previous post was at 10:44 AM ----------
OK Just to satisfy my curiosity, I downloaded the whole file again, and try to sideload it on my MJ9 phone and it immediately error out, this file seems to be the same than the other one in the other thread, it will work only only if you are on 4.2.2. So for me and anybody else trying to update from 4.3 MJ9 to MK2, it's still a no go.
Click to expand...
Click to collapse
You could try updating through Kies...sometimes that's more reliable than OTA connections.
prisonnet said:
You could try updating through Kies...sometimes that's more reliable than OTA connections.
Click to expand...
Click to collapse
Kies3, says that the version I have (MF9) is not valid (or something like that) to do firmware updates. Original Kies, already says that my phone is not supported.
erasat said:
Kies3, says that the version I have (MF9) is not valid (or something like that) to do firmware updates. Original Kies, already says that my phone is not supported.
Click to expand...
Click to collapse
If I'm not mistaken. ... when u go to stock recovery..... the is an option for update via adb.....or something like that and u should be able to install update. Zip from there.. the only thing is I'm not sure if that would wipe your data or not but from adb sideload custom recovery it only wipe cache and dalvik cache as far I know. ...
SWYPED_FROM_S4_MF3_REDVENOM
ted77usa said:
If I'm not mistaken. ... when u go to stock recovery..... the is an option for update via adb.....or something like that and u should be able to install update. Zip from there.. the only thing is I'm not sure if that would wipe your data or not but from adb sideload custom recovery it only wipe cache and dalvik cache as far I know. ...
SWYPED_FROM_S4_MF3_REDVENOM
Click to expand...
Click to collapse
Yes, that's what it's called sideload and that's what I tried earlier but like I mentioned then, it errors out immediately, and at least you can see that it's clearly asking for 4.2.2.
One more thing, I just hanged up with AT&T, the Technical Support checked everything there and it seems that everything should be in place for me to get the update, they did something and asked me to try it again, as soon as I enter the Update Menu I saw a message saying something like DZ initialization, I have seen that just before we get the OTA, so I asked her and she told me that it was because of what she did, so I should be good to get any update available, and as soon as I tried it I got the same old Software Update Interrupted.
She told me that they will call me tomorrow with other more advanced technical Department to try to see what may be causing this.
I'll give them a quick look over, but I wouldn't jump on the bandwagon using these until somebody more versed then me confirms it's legit.
They look legit, but it's for normal recovery mode not Odin in case anyone was trying to do that.
Here's the file tree if anyone is interested, and doesn't want to download it...
http://pastebin.com/21vA9MMV
NighthawkXL said:
I'll give them a quick look over, but I wouldn't jump on the bandwagon using these until somebody more versed then me confirms it's legit.
They look legit, but it's for normal recovery mode not Odin in case anyone was trying to do that.
Here's the file tree if anyone is interested, and doesn't want to download it...
http://pastebin.com/21vA9MMV
Click to expand...
Click to collapse
OP Updated with File Tree ......great job bro......:good:
ted77usa said:
OP Updated with File Tree ......great job bro......:good:
Click to expand...
Click to collapse
Mind you, I haven't a 4.3 device to test this on... so although it looks legit (as in the file structure is correct) we still need someone to guinea pig it.
NighthawkXL said:
Mind you, I haven't a 4.3 device to test this on... so although it looks legit (as in the file structure is correct) we still need someone to guinea pig it.
Click to expand...
Click to collapse
I thought u need to be on 4.2.2 in order this to work. .... checking security for 4.2.2 before flashing. ..... according to erasat.
erasat said:
Yes, that's what it's called sideload and that's what I tried earlier but like I mentioned then, it errors out immediately, and at least you can see that it's clearly asking for 4.2.2.
Click to expand...
Click to collapse
SWYPED_FROM_S4_MF3_REDVENOM
ted77usa said:
I thought u need to be on 4.2.2 in order this to work. .... checking security for 4.2.2 before flashing. ..... according to erasat.
Click to expand...
Click to collapse
Yeah your right, I'm not thinking properly... kept forgetting these are the update files, not restore files. Though I assume they could be turned into Odin files given the right person.
For those of you with my same issue, updated to mj9 and getting errors while trying to update to Mk2, . Please follow my other thread at http://forum.xda-developers.com/showthread.php?t=2573637 and look for the link on post #3, finally found the update file and I'm already at MK2.
NighthawkXL said:
Yeah your right, I'm not thinking properly... kept forgetting these are the update files, not restore files. Though I assume they could be turned into Odin files given the right person.
Click to expand...
Click to collapse
What would it take to do this? Anything already started to make this happen?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Okay was able to successfully root my Samsung Galaxy SMT530NU, I have TWRP downloaded but how do you find the correct device name for this device so I do not install the wrong file and brick my device?
I have the 10.1" SMT530NU and rooted with Towelroot.
Hopefully TWRP will work for recovery, but before I move further I wanted to turn to the forum for support. Thanks much!
Ian
Ianlmt said:
Okay was able to successfully root my Samsung Galaxy SMT530NU, I have TWRP downloaded but how do you find the correct device name for this device so I do not install the wrong file and brick my device?
I have the 10.1" SMT530NU and rooted with Towelroot.
Hopefully TWRP will work for recovery, but before I move further I wanted to turn to the forum for support. Thanks much!
Ian
Click to expand...
Click to collapse
As far as I know TAB 4 still don't have TWRP support , I'm also waitin for my T331
Is there any custom recovery available for this Tab? It seems support for the tablets are slow so far, maybe because it is new? Not even sure how long it has been out for.
I am learning Java coding now and intend to start contributing to the community at some point.
I'm glad I was able to get it rooted at least.
It's been out since early may, just not enough interest.
SM-T530NU Tab 4 10.1 Wifi model
I dont understand why there wouldnt be interest for these android tablets. They are some of the most powerful on the market. Honestly they should be hot **** right now. I think basically they are not in the right hands because they are still fairly new and expensive. With a proper recovery and some nice roms and overclock support it would be super beast. I just got my tab 4 10.1 model: SM-T530NU last night. Traded a laptop and my HP Touchpad 10 inch tablet for it. I got it rooted with towelroot no problem. Also went through and got rid of knox and samsung apps i didnt want. Im currently on 4.4.2 and saw there was an update but i'm going to wait on that. How would one go about building a proper TWRP and build at least a cyanogenmod rom for it? I have one and am willing to test or whatever to get something going. I would need someone with knowhow to teach me
Don't take the ota update it kills Towelroot.
Thanks for the warning!
Ianlmt said:
Don't take the ota update it kills Towelroot.
Click to expand...
Click to collapse
I read somewhere that you can reroot if you replace the original boot.img i want to say it was. then you could root with towelroot, and then copy the new boot.img back on and root will stay. worth a try if you updated and still want root. you flash the file with odin. I could upload the boot.img from mine if we have the same one
Also, what version are you running now after updating? Is there a way to get this update to take a look at it? The SM-T530NU source from samsung is kitkat, not sure when it was uploaded, and im guessing it's the 4.4.2 i have now.
It appears the Source code from samsung is 4.4.1 which should be plenty to get a recovery working? How do we get more attention and someone with more knowhow to take a look at this? If we had a working recovery id at least try to port cyanogenmod to our device. i would test a real devs recovery but not trying myself with that
Anyone know where to get stock firmware for this? Cf auto root messed it up
Ianlmt said:
Anyone know where to get stock firmware for this? Cf auto root messed it up
Click to expand...
Click to collapse
you should have tried what i said first, i heard it worked.
I had tried that before you posted
Ianlmt said:
I had tried that before you posted
Click to expand...
Click to collapse
ah ok. im still trying to figure out how to even extract the recovery.img and the boot.img
PizzaG said:
ah ok. im still trying to figure out how to even extract the recovery.img and the boot.img
Click to expand...
Click to collapse
If you find out let me know I would love to tinker and help with this, I am only just starting to learn Java programming.
btw, I installed this:
http://www.sammobile.com/firmwares/3/?download=28887
via odin and got back to pre-update and used towelroot again... ROOTED!..
screw updates! they suck I swear I never gain functionality they just patch root methods!
Ianlmt said:
If you find out let me know I would love to tinker and help with this, I am only just starting to learn Java programming.
btw, I installed this:
http://www.sammobile.com/firmwares/3/?download=28887
via odin and got back to pre-update and used towelroot again... ROOTED!..
screw updates! they suck I swear I never gain functionality they just patch root methods!
Click to expand...
Click to collapse
I'm glad you found a way to downgrade. do you think you could reup that 4.4.2 to an easier location? i would like to update and play with rooting now that i know i can easily go back to stock
PizzaG said:
ah ok. im still trying to figure out how to even extract the recovery.img and the boot.img
Click to expand...
Click to collapse
PS also I found this:
The Kernel:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sm-t530nu
Ianlmt said:
PS also I found this:
The Kernel:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sm-t530nu
Click to expand...
Click to collapse
correct, that is the same source that i grabbed. that's the 4.4.1 source. can you please upload the 4.4.2 version odin flashable file? and also, where does samsung update download the update file to on the phone? id like to look at that as well
PizzaG said:
correct, that is the same source that i grabbed. that's the 4.4.1 source. can you please upload the 4.4.2 version odin flashable file? and also, where does samsung update download the update file to on the phone? id like to look at that as well
Click to expand...
Click to collapse
no idea but the link in post #13 has the md5 file for 4.4.2
I can confirm that root still works fine on the latest September update for the SM-T530NU. i did everything with odin. first i grabbed the stock april update odin flashable file along with the september update. i installed the new update and root was killed. i flashed the april update boot.img over the new update boot.img with odin. i reran towelroot and it rooted. i then flashed the boot.img back from the september update and all was good. newest update from samsung with working root. took me all of 10 minutes to do. holler if you need a hand
semi-working recovery and source can be found at
http://forum.xda-developers.com/tab...rp-2-7-1-0-galaxy-tab-4-10-1-sm-t530-t2830798
Any update on this?
Sent from my SM-T530NU using Tapatalk
Your warranty is now void, don't blame me if your phone blows up blahblahblah.
Only system and kernel are being flashed, no Modem, BL, etc. You should update to 20A before using.
Have not tested this myself, due to not owning the H850. edit: flashed it on T-Mobile 830 for fun with 830 boot, no surprise, didn't work.
Decided to post anyway. If your going to use it, BACKUP, BACKUP, BACKUP
Based off of 20A Complete zip from @autoprime. Only things touched are bootanimation (pixel black) and renamed recovery-from-boot.bak. It's also been zip-aligned.
Flash in recovery, profit??
SuperSu and Busybox included. Only /system is wiped, data left alone.
Can dirty flash over current 20A if you like.
Any errors, etc, would most likely be related to deodexing as all files are stock.- Again, haven't tested this one myself
Link: H850_20A_DeOdexed
MD5: bb58ff90c21bbc09b4d0f1c132fa91b3
If anyone would like to use this as a base, Great! Would appreciate some credit. [emoji3]
Enjoy.
Optional: Adjust Screen Color , Fluence HD Patch
Credits: @autoprime for stock zip. @Chainfire for supersu. @SuperR. for the kitchen. @Tilde88 for pointing me in the right direction. @PlayerZ_ZawZaw for bootanimation. @jcadduono for TWRP.
It's people like them that make Android great!
Finally, thanks to Google/LG & XDA.
...whew.
Reserved
lordodin912 said:
Your warranty is now void, don't blame me if your phone blows up blahblahblah.
Have not tested this myself, due to not owning the H850.
Decided to post anyway. If your going to use it, BACKUP, BACKUP, BACKUP
Based off of 20A Complete zip from @autoprime. Only things touched are bootanimation (pixel black) and renamed recovery-from-boot.bak. It's also been zip-aligned.
Flash in recovery, profit??
SuperSu and Busybox included. Only /system is wiped, data left alone.
Can dirty flash over current 20A if you like.
Any errors, etc, would most likely be related to deodexing as all files are stock.- Again, haven't tested this one myself
Link: Uploading...
MD5: bb58ff90c21bbc09b4d0f1c132fa91b3
If anyone would like to use this as a base, Great! Would appreciate some credit. [emoji3]
Enjoy.
Optional: Adjust Screen Color , Fluence HD Patch
Credits: @autoprime for stock zip. @Chainfire for supersu. @SuperR. for the kitchen. @Tilde88 for pointing me in the right direction. @PlayerZ_ZawZaw for bootanimation. @jcadduono for TWRP.
It's people like them that make Android great!
Click to expand...
Click to collapse
Um, so why post something for others that you haven't even tested for yourself ? Seems a bit dubious? No?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Anarchist77 said:
Um, so why post something for others that you haven't even tested for yourself ? Seems a bit dubious? No?
Click to expand...
Click to collapse
Edit... At least have an H850 tester first?
Regardless, thanks for another option for a ROM. Hopefully something good 😊
^Better than not sharing at all, eh? ; ) Not a dev myself, just learning. Enjoy
lordodin912 said:
^Better than not sharing at all, eh? ; ) Not a dev myself, just learning. Enjoy
Click to expand...
Click to collapse
Hey, all good. No offence meant.
Anarchist77 said:
Hey, all good. No offence meant.
Click to expand...
Click to collapse
Let me know if you end up trying it. I'll update OP and give you credit.
Right on! So this should work well with FluenceHD, potentially trying to bring myself to update to Nougat, but man Xposed has some pretty clutch tools, and reverting back to marshmallow I'm reading is a few more steps than I would like to take in a given night, you know if I decide that no ads on YouTube and background playback is worth giving up...
Still thank you for uploading and I will report back if I decide to pause Xposed in my day to day
Pphish20 said:
Right on! So this should work well with FluenceHD, potentially trying to bring myself to update to Nougat, but man Xposed has some pretty clutch tools, and reverting back to marshmallow I'm reading is a few more steps than I would like to take in a given night, you know if I decide that no ads on YouTube and background playback is worth giving up...
Still thank you for uploading and I will report back if I decide to pause Xposed in my day to day
Click to expand...
Click to collapse
It'd be nice if you could dual boot it alongside MM (wishful thinking). Don't think the kernel would boot on the old bootloader....maybe someone with more knowledge can help, or a daredevil could just try to flash it. The older MM modem should still work though, maybe. Shouldn't hurt? if your flashing in dual boot or just through TWRP normally because there's no modem, BL etc being flashed just system&boot.
Now with my old S4 there was no problem running an older BL with newer kernels, but this phone....idk.
Received error while flashing, code 7, seems it couldn't locate a certain filesystem and aborts installation
Pphish20 said:
Received error while flashing, code 7, seems it couldn't locate a certain filesystem and aborts installation
Click to expand...
Click to collapse
Hmmm I removed the assert from updater script already....maybe TWRP needs to be updated??
Just finished DeOdexing 20B so I hope this is working.....
lordodin912 said:
Hmmm I removed the assert from updater script already....maybe TWRP needs to be updated??
Just finished DeOdexing 20B so I hope this is working.....
Click to expand...
Click to collapse
Im using 3.0.2-1
I'll get you a log soon and will gladly test 20b whenever that's uploaded
Going to try to flash this 20A myself soon, with a replaced 830 boot.img and see what happens......
Pphish20 said:
Im using 3.0.2-1
I'll get you a log soon and will gladly test 20b whenever that's uploaded
Click to expand...
Click to collapse
Ok, just downloaded 850 20A checked MD5, then replaced boot.img with 830. Flashed fine, no problems. Wouldn't boot though....no surprise really.
Have you checked the md5? could be a bad download, it is mega after all. Can't think of another reason why it would flash here but not on yours....
lordodin912 said:
Ok, just downloaded 850 20A checked MD5, then replaced boot.img with 830. Flashed fine, no problems. Wouldn't boot though....no surprise really.
Have you checked the md5? could be a bad download, it is mega after all. Can't think of another reason why it would flash here but not on yours....
p.s. 20B has finished uploading....making thread soon.
Click to expand...
Click to collapse
Yeah md5 is good... I'll send you a TWRP log later or possibly just forget about it if 20b works
Thanks again!
Delete