I rested my phone to its factory setting in the Setting menu. Now its falling to pass through Startup wizard, am getting a response that Secsetupwizard has stopped and the phone Starts at the first page again , i noticed that the phone usb port do charge but cannot read data to a Pc i tried to put a new port but still Just chargin only. how can i restore my phone back without using a pc? am able to go to recovery mode, please help
Hi,
It's likely a bad cable, or the drivers aren't installed correctly on the pc. Download kies from Samsung and it will install drivers. One if those 2 things should allow your device and pc to communicate.
Failing that, you can ask for help here,
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S3 Ask any question.
Good luck!
---------- Post added at 11:39 AM ---------- Previous post was at 11:38 AM ----------
You can also download a rom to a micro SD card and install it from the card in your device with recovery. ?
Related
So the rom i was running sudddnly stopped working on my samsung gt-i9300,dont know why,, anyway,, its stuck in a boot loop ,so tried to put it back to stock with toolkit but it and my computer wont recognise the fone,, and wont pick up sd card,, so i downloaded official from samsung ,put it on sd card and flashed it via recovery mode on the fone, it loads in then says cant mount efs invalid argument ,i cant turn on usb bebugging so most of the easy fixes wont work.. So is there a fix or should i just give up and invest in a new fone ???? Any help would be great folks
Hi,
I suggest asking the experts who own your device for help, Here...
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting
Good luck!
My sim card wasnt working and to fix that i decided to format my phone by flashing Stock ROM using Odin [I had root], running on Cyanogenmod. While doing so, it was taking a hell lot of time and I didnt know what to do, so i pulled the cable and restarted the phone and this message came on: "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
So i did that using kies, followed the procedure..downloaded the firmware to the computer, blah blah, but while "transferring that to the mobile phone" procedure, it got stuck at 0% and for hours it wont move!!
I tried using Odin again, but it just dont work!!
Please help me!!..I cant even go to my phone now..my (Home + Power button + Volume down) is accessible, but not recovery.
Hi,
Asking here in this help thread in your device section would be best,
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S3 Ask any question
A couple ideas too.... Try a different version of Odin. Also, Odin usually fails if Kies is running. End all kies processes in the task manager on the pc. Try a different cable and USB port on your PC. And forget kies, it won't work if your rooted or are not completely stock.
Again, for more help, ask in the thread I linked above.
Good luck!
Thank you. Thread closed.
I have a samsung galaxy note 10.1, n8013. I attempted to install cyanogenmod using the Heimdall Suite and the CW recovery (recovery-clockwork-6.0.3.6-n8013.img. I downloaded Heimdall and the recovery file. When I try to do a check of the version of the Heimdall, I get an error that it is not a valid Win 32 file. I was able to get the tablet into download mode and hooked to the pc via usb. I successfully loaded the drivers from the Heimdall Suit using Zadig.Exe. The problems started when i attempted to open a command prompt in the directory that had the recovery .img file. I get an error saying that it is not a valid command. I have attempted to do this three times without success. All I want to do is root the tablet, AND update the android version since Samsung has no intention of sending out an upgrade.
Can someone assist?
Many thanks for all the hard work.
android old one
Hi,
Asking for help in the thread you downloaded the ROM from is your best option.
Good luck!
---------- Post added at 08:29 PM ---------- Previous post was at 08:26 PM ----------
If you have any further questions on that device, you can ask them here,
>*Samsung Galaxy Note 10.1*>*Galaxy Note 10.1 Q&A, Help & Troubleshooting
Tried flashing a rom made for my phone from twrp manager and the flash failed. The phone is stuck in a boot loop with twrp manager open but the installations fail. Downloaded stock firmware, uninstalled kies, tried different cables and odin cannot finish flashing back to original hardware. It is connected but always fails after it cant connect to serial port, starting connection, or complete write operation failed. Should I try to find different drivers or any fixes? Ive tried Odin 3.04 and 3.07. Also, would anyone have any idea where i could find the correct drivers?
Hi there
You'd be best served asking for help from the experts who own your device, here
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S3 Ask any question.
Good luck
i chosed format system option form the recovery mode after i got malwares on my phone wich i couldn't delete by formating data and after (formating system option) every time i try to turn on my phone it just stock on model number logo and then i tried to install a new rom through PC but it won't connect using the USB but it shows the battery on the screen without any charging progress and now i can't do anything at all!
NOTE:i installed samsung USB drivers.
sorry for my bad english
Hi,
Try posting your question here:
Galaxy S Duos Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!