MY N8000 IS STUCK AT DOWNLOAD MODE, IT SHOWS
ODIN MODE (SDCARD)
PRODUCT NAME GT N8000
CURRENT BINAY : CUSTOM
SYSTEM STATUS : CUSTOM
RP SWREV :
RPMB : INVALID RPMB DATA
I cannot get to recovery mode, when i try to flash it gets stuck at nand write failed.
i tried flashing stock recovery it wont work, gets failed at nand write failure. i cannot get to download mode unless i have memory card inserted what to do please help me
Related
Hi there i have a GT-I9200 stock on boot after installing the OTA update 4.4.2 The device boot shows the Smasung Logo and the restart I tried to download the rom and install via Oden everything normal but not when flash boot and recovery it skipped it and flash System ext4 and whin device complete download and restart it shows a message that the device will enter recovery mode but there is no recovery in the device and keep restarting and shows a message when boot into download mode like this
System STATUS : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
XNOX KERNEL LOCK : 0X0
XNOX WARRANTY VOID : 0X1
QUALCOMM SECUREBOOT : ENABLE
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: ENABLE
I have tried to install 4 different 4.4.2 roms it allways the same problem any one have an idea what i should do to install the rom correctly
Any one would help ???
i have many device i9200 same problem restart in loop
so i flashed it with 4 file ap+bl+md+csc
stay same problem
wipe all via recovery stoct
after flash rom, please boot go to stoct recovery (volume(+) and power and home) wipe data, wipe cache --->Done
SM-T337A
I tried to root the device and I evidently used the wrong root and it caused the device to not boot. It goes into download mode and recovery mode. I have tried to use odin3 to flash stock firmware and that didn't work after that I used odin3 to flash a .pit and a firmware and that didn't work. Both times it failed. They either said re-partition operation failed or fail (auth).
The binary says custom in odin mode. I am not sure if that voids the warranty as knox and system status are both 0x0 and official. If you need anymore info let me know.
good morning/evening,
I have a samsung galaxy note 10.1 GT-N8010. I left it for charging and the screen went completely white lines and does not respond but can access odin mode only.Tried flashing stock rom but it says pit partition failed, tried various other methods in odin but of no use. can acess odin mode only. in odin mode it shows the following:
Product name:
custom binary download:no
system status : Custom
but it was in stock rom only
it says pit partition failed
What are you flashing ???
JJEgan said:
it says pit partition failed
What are you flashing ???
Click to expand...
Click to collapse
i was charging it and the screen went completely blank with completely white but i could get into odin mode so i tried flashing the samsung official firmware from smmobiles. Some forums and threads say it could be a damage in emmc chipset in motherboard causing pit damage and corrupt the software.is there any method i can fix it please help me.
in odin mode it does not show product name. i cannot get into recovery.
:crying:
thankyou
I have Galaxy S7.
I try to root the phone and put superman rom on and now the phone won't boot. I mean it's not booting at all. I try to boot in recovery mode and it shows
Recovery booting .... in blue and it goes to blue screen and it says in red custom binary blocked by secure boot (boot img) and also "system software not authorized by att has been found on your phone etc.
And when I go downloading mode it shows
Odin mode high speed
Product name smg930a
Current binary custom
System status custom
Fap lock on
Warranty voided 0x0
Qualcomm secure boot enabled
Rp swrev: n4 (2,1,1,1 ) k1 s3
Secure download enable
You can't flash a stock ROM from download mode with ODIN?
Well you can try to flash back a stock rom or try to recover the firmware with samsung kies 3.
Please help me. My device j701f is bootloop and can't enter recovery mode. But it can boot to download mode. I've installed driver and my device detected in odin. But when I start flashing firmware odin just stuck in initialization and not working. Please help me. Tell me what i'm wrong and what's the solution. Thanks before
which binary verrsion
Use the most current binary and try with the PIT file, maybe formatting the partition table will help,