samsung galaxy note 10.1 N8010 has a screen full of white lines can acess odin mode - Galaxy Note 10.1 Q&A, Help & Troubleshooting

good morning/evening,
I have a samsung galaxy note 10.1 GT-N8010. I left it for charging and the screen went completely white lines and does not respond but can access odin mode only.Tried flashing stock rom but it says pit partition failed, tried various other methods in odin but of no use. can acess odin mode only. in odin mode it shows the following:
Product name:
custom binary download:no
system status : Custom
but it was in stock rom only

it says pit partition failed
What are you flashing ???

JJEgan said:
it says pit partition failed
What are you flashing ???
Click to expand...
Click to collapse
i was charging it and the screen went completely blank with completely white but i could get into odin mode so i tried flashing the samsung official firmware from smmobiles. Some forums and threads say it could be a damage in emmc chipset in motherboard causing pit damage and corrupt the software.is there any method i can fix it please help me.
in odin mode it does not show product name. i cannot get into recovery.
:crying:
thankyou

Related

[Q] my n8000 dead

hi
my n8000 locked and after i reboot screen was only many lines.
i tried to flash it but i can just go to odin mode.
no cwm mode.
no samsung screen.
just downloading screen and odin mode.
when i tried to flash official rom for my country it failed on sboot.bin.
in odin mode it said:
ODIN MODE
PRODUCT NAME: GT-N8000
CUSTOM BINARY DOWNLOAD: Yes ( 7 counts )
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
i am waiting for your syggestion for solve this prob.
Suggest stock rom flash via Odin and report where Odin fails .
Download a new stock rom as existing may be corrupt .
Fails at Nand Write you need a new motherboard .
JJEgan said:
Suggest stock rom flash via Odin and report where Odin fails .
Download a new stock rom as existing may be corrupt .
Fails at Nand Write you need a new motherboard .
Click to expand...
Click to collapse
i did stock rom flash via odin but it fails at sboot.bin

[Q] crashed recovery GT-N8000

the latest firmware was 4.1.2 and the note is rooted there was no problem with it then once the device crashed and restarted and stuck on galaxy note 10.1 screen and i cannot enter recovery mode only can enter download mode i tried 50 different stock rom and all kinds of recovery and pit files and there is no efffect im trying to fix this from a month ago
i can flash anything from odin and i get pass message but no effect on the device
ameer3adel said:
the latest firmware was 4.1.2 and the note is rooted there was no problem with it then once the device crashed and restarted and stuck on galaxy note 10.1 screen and i cannot enter recovery mode only can enter download mode i tried 50 different stock rom and all kinds of recovery and pit files and there is no efffect im trying to fix this from a month ago
i can flash anything from odin and i get pass message but no effect on the device
Click to expand...
Click to collapse
I have the same exact problem with my n8013
tried different recovery files and flashing the stock rom with no result always stuck at galaxy note 10.1 screen and no recovery mode.
I even tried cracking it open and disconnect the battery for few hours but no luck.
i hope someone can help

Galaxy Tab 4 Brick (Maybe Broken Motherboard)

SM-T337A
I tried to root the device and I evidently used the wrong root and it caused the device to not boot. It goes into download mode and recovery mode. I have tried to use odin3 to flash stock firmware and that didn't work after that I used odin3 to flash a .pit and a firmware and that didn't work. Both times it failed. They either said re-partition operation failed or fail (auth).
The binary says custom in odin mode. I am not sure if that voids the warranty as knox and system status are both 0x0 and official. If you need anymore info let me know.

Galaxy Note N8000 stuck on samsung logo after update. Everything stock never rooted.

Hello,
My N8000 was updating today and it got stuck at the samsung logo agter the "Galaxy note 10.1" screen. I am unable to access recovery mode; only download mode. I have been looking for hours for a solution but can't find any. I have tried to flash a stock ROM from sammobile not working (odin always fails) , tried flashing both custom and stock recoveries but odin keeps failing. I installed the toolkit but inorder to flash roms and stuff i need usb debugging to be enabled, and it is not. Is there a way to enable it while on bootloop?
Thanks,
Where does Odin fail ??
JJEgan said:
Where does Odin fail ??
Click to expand...
Click to collapse
When flashing stock recovery, it fails at recovery.img, flashing rom at boot.img
Suggests wrong files used .
Or possible damaged NAND .

Odin fails to flash stock firmware

So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
ToadNugget said:
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
Click to expand...
Click to collapse
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
It_ler said:
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
Click to expand...
Click to collapse
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
ToadNugget said:
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
Click to expand...
Click to collapse
Check this thread:
Sw rev. Check fail. Device: 5, binary 3
Hi, I've got a Galaxy S6 G920F on Vodafone that I am trying to downgrade from 7.0 to 6 or 5 so that I can go through with an unlocking procedure but I keep getting the error message " SW REV. CHECK FAIL. DEVICE: 5, BINARY 3". Can anyone help?
forum.xda-developers.com
Seems that you have to flash another firmware version.
Hi Guys,
Device: Samsung Galaxy Note N7000
Power On: Stuck with popup "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Stock ROM: can't locate firmware for those BL, AP, CP, CSC files
Anyone can help? Appreciated.
Cheers

Categories

Resources