Hi,
I flashed liquid smoth ROM and when it booted it started getting an error every few seconds: the process.com.android.systemui has stopped.
I powered off the phone and attempted to boot into recovery but I couldn't. The phone seemed to be bricked. I had to press the two volume keys and the power button to unlock it.
It booted into recovery, I wiped everythig even internal storage and flashed CyanHacker Rom and gapps after. It booted and surprisely I got the same error: the process.com.android.systemui has stopped.
Now I am trying to boot into recovery again but the only thing I get is the capacitive buttons flashing for a few seconds.
Any idea?
Thanks!
I connected the phone to the computer and I was able to use the adb shell so that I rebooted the phone and it booted normally. After selecting the wifi network I get this error again
Try disabling wi-fi, reboot, then goto Settings > Status Bar > Signal Strength > Hide, reboot and enable wifi.
The settings for signal strength feature maybe located in a different place or have a different name depending on the rom you're using.
Rkr87 said:
Try disabling wi-fi, reboot, then goto Settings > Status Bar > Signal Strength > Hide, reboot and enable wifi.
The settings for signal strength feature maybe located in a different place or have a different name depending on the rom you're using.
Click to expand...
Click to collapse
Will try flashing one of those again and see if that fixes it.
Related
Having trouble with my data network after OTA upgrade.
- Phone was rooted, but just the basics installed (busybox, clockwork, etc).
- OTA update seemed to work on Thursday (reboot after upgrade, all was well).
- However another reboot (just to get email working again) on Sunday and the 3g-edge icon disappears and data network stops working. No additional software installed between Thu and Sunday.
- Installed JH6 via Odin3 1-click installer.
- After reboot 3g-edge icon still missing (and data network not available either).
- Kies mini would not update to JH7 as it did not recognize the Odin3 installed firmware.
- Did a factory reset. Still no icon/data network (on JH6-factory now)
- Used Kies mini to get up to JH7 and still no 3g-edge icon/network.
- Tried to check for software updates and got the following message (DM initialization is not ready. Check network or SIM card) - More than DM, I think it is that the network is not ready.
Phone has worked without issue through all this, but no data network (3g/edge).
Suggestions/Thoughts on how to enable 3g?
Thanks in advance.
deskamess said:
Having trouble with my data network after OTA upgrade.
- Phone was rooted, but just the basics installed (busybox, clockwork, etc).
- OTA update seemed to work on Thursday (reboot after upgrade, all was well).
- However another reboot (just to get email working again) on Sunday and the 3g-edge icon disappears and data network stops working. No additional software installed between Thu and Sunday.
- Installed JH6 via Odin3 1-click installer.
- After reboot 3g-edge icon still missing (and data network not available either).
- Kies mini would not update to JH7 as it did not recognize the Odin3 installed firmware.
- Did a factory reset. Still no icon/data network (on JH6-factory now)
- Used Kies mini to get up to JH7 and still no 3g-edge icon/network.
- Tried to check for software updates and got the following message (DM initialization is not ready. Check network or SIM card) - More than DM, I think it is that the network is not ready.
Phone has worked without issue through all this, but no data network (3g/edge).
Suggestions/Thoughts on how to enable 3g?
Thanks in advance.
Click to expand...
Click to collapse
Sorry for bringing this thread up, but I am having exact problem and I can not seem to find a solution. Wifi works fine, but there is no data (edge or 3g) connection icon. Its just not there and when I am not on wifi it is impossible to use the device to connect to the web :/
Are either of your phones SIM unlocked?
Don't give up !
First, try this:
1. From the main home screen, tap menu
2. Tap Settings, then Privacy
3. Tap Factory data reset
4. Tap Reset phone
5. Enter your password, then tap Yes to confirm
If that doesn't work, or if your phone is frozen:
1. Turn the power off. If your Samsung Captivate is frozen, pull the battery out and reinsert it
2. Hold the Volume Down button
3. Press and release the Power button
4. You are now presented with a menu that allows for Fastboot, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Press and release the Power button
7. Now simply confirm your decision: Volume Up for YES and Volume Down for NO
If you selected YES, all data including third-party applications will be deleted from the Samsung Captivate. Once the wipe is complete, the phone will reboot to its factory fresh state. GOOD LUCK
Hey,
I recently flashed BRD's 3.1 zip's and now ive seemed to have lost my wifi :/ if im just viewing my open network it shows full bars but when i go to connect it drops to 1 and just cycles through the connection process without ever finishing
I followed the instructions to the t and remembered to wipe / factory reset
I also went through the steps once more to see if the reflash would work but its just stuck on the connection to wifi network page
maybe i have a bad download???
EDIT: reflashed onneee more time and it seems to be working apps are restoring now
any help would be much appreciated
thanks
jloya said:
Hey,
I recently flashed BRD's 3.1 zip's and now ive seemed to have lost my wifi :/ if im just viewing my open network it shows full bars but when i go to connect it drops to 1 and just cycles through the connection process without ever finishing
I followed the instructions to the t and remembered to wipe / factory reset
I also went through the steps once more to see if the reflash would work but its just stuck on the connection to wifi network page
maybe i have a bad download???
EDIT: reflashed onneee more time and it seems to be working apps are restoring now
any help would be much appreciated
thanks
Click to expand...
Click to collapse
This is what worked for me:
1) Go into Settings > Wireless & networks < Wi-Fi settings.
2) Press on the current network and select "Forget" to delete it.
3) Press Add-Wi-Fi network, then manually enter all of your info. Don't forget to enter the Security type & password.
4) Touch Save. It should then connect and stay connected.
EDIT: Oops just saw you resolved it by re-flashing. However the method I described worked for me when mine could not connect to my network (which I originally configured during the installation setup). This happened to me more than once, and on more than one device too.
I am having trouble with certain ROMs (nameless, carbon) where I do not have LTE or a cell phone signal. I also have no IMEI number when I dial *#06# on these ROMs.
The weird thing is if I flash AOKP or SlimRom I have signal and an IMEI everything works fine, it wouldn't be an issue except AOKP take 20 minutes to boot up every time and SlimRom keeps randomly rebooting on it's own and runs slowly.
What I tried was this: Flashed SlimRom > downloaded Terminal Emulator > ran "su" then "reboot nvbackup" > then once it rebooted I went back to recovery and installed Carbon > again installed Terminal Emulator > ran "su" then "reboot nvrestore" > after that it got stuck on the GS3 splash screen until I wiped and reinstalled a ROM. Still no fix.
What do I need to do to fix this proper?
P.S. The only *#xxx# number I could get to work was the *#06#, the rest do nothing on my phone.
Nobody?
> I am using Micromax A110Q. It turns on perfectly and displays
> everything fine. Now when I turn off the screen or it sleeps
> automatically the next time i press the power button to do something
> screen doesn't display's anything although the the button icons on the
> touchpad lid up.The device was working fine before I made the following changes.
I rooted the device and installed CWM and unistalled some of the default apps in offered by MICROMAX. Then after installing a few things I made a backup using CWM and then again flashed my device with v2 of the stock ROM(I was learning the basics of flashing).
I then used CWM recovery to undo the changes ie.I restore the the backup I made just before flashing. Now when I after my mobile boots it sometimes it displays-
> Unfortunately, com.google.process.gapps have stopped working
but the problem persists even when the error doesn't occur.
Plz help me out and in form me if you need any other details.
So I just finished rooting my OnePlus 7t Pro and when it turned back on it won't connect to the wifi. Everything worked fine before but now when I flip the wifi switch to "on" it plays the animation but stays in the "off" setting. I've tried to look online for help but everything is from years ago and no longer relevant on android 11. Help please this is my first root attempt.
1. Wipe /cache partition
2. Forget the Wi-Network ( means remove Wi-Fi network from saved networks list ) and reconnect
3. Switch off Bluetooth
jwoegerbauer said:
1. Wipe /cache partition
2. Forget the Wi-Network ( means remove Wi-Fi network from saved networks list ) and reconnect
3. Switch off Bluetooth
Click to expand...
Click to collapse
I've tried to turn off the phone then press all 3 buttons to get it into fastboot but instead it just does the bootloader thing again and wifi still doesn't work. When I was installing a driver on it I couldn't find the one that matched my build number exactly so I got the next closest thing. Could this have something to do with it?
It should be obvious to you that when the phone is started in Fastbot mode (AKA Booloader mode), the Android OS has not been started at the same time, so Wi-Fi cannot work.
jwoegerbauer said:
It should be obvious to you that when the phone is started in Fastbot mode (AKA Booloader mode), the Android OS has not been started at the same time, so Wi-Fi cannot work.
Click to expand...
Click to collapse
I know that but after going through bootloader mode it restarts like normal and goes back to the home screen. At this point I go to settings and proceed to switch the wifi on and the switch does the "switch on animation" while still staying "off". I did in fact delete all previously known wifi information and managed to wipe the cache partition.