i tried 4 or 5 roms lollipop but this issue seem happen with cm12 . Can anybody confirm ?
The issue is the navigation buttons does not turn off after screen turned off (you can check by turn on screen then turn off right immediately , the light still there)
hoangtu2410 said:
i tried 4 or 5 roms lollipop but this issue seem happen with cm12 . Can anybody confirm ?
The issue is the navigation buttons does not turn off after screen turned off (you can check by turn on screen then turn off right immediately , the light still there)
Click to expand...
Click to collapse
i am using AK.068.OPO.SKULL.CM12 Kernal with LiquidSmooth nightly, and this problem seems to be fixed most of the time. - still happens once a while. but much much better now.
I had this with older temasek but v3.3 seems to have it fixed now
Sent From Lollipopified Bacon Goodness!
Related
Ok guys, I have a really big problem. I observed today that autorotation doesn't work. This all started (I think) after my phone has suffered a huge drop on the floor. Ok, you can say that that's the cause, but the strange part is that i checked the gyroscope and the accelerometer with sensor sense and other apps and it show that everthing is normal. It detects movements, rotation etc.
I changed the rom (from 4.4.2 stock rooted to CM 11 M5) and everything is the same. What should I do?
P. S. Also, my device isn't recongnized in windows anymore. I checked the MTP settings and still not working. And it can't be caused by drivers.
Just a guess but did you check the auto rotate is selected
Sent from my Nexus 5
dav8388 said:
Just a guess but did you check the auto rotate is selected
Sent from my Nexus 5
Click to expand...
Click to collapse
yes
sergiu_s said:
Ok guys, I have a really big problem. I observed today that autorotation doesn't work. This all started (I think) after my phone has suffered a huge drop on the floor. Ok, you can say that that's the cause, but the strange part is that i checked the gyroscope and the accelerometer with sensor sense and other apps and it show that everthing is normal. It detects movements, rotation etc.
I changed the rom (from 4.4.2 stock rooted to CM 11 M5) and everything is the same. What should I do?
P. S. Also, my device isn't recongnized in windows anymore. I checked the MTP settings and still not working. And it can't be caused by drivers.
Click to expand...
Click to collapse
Go Here: NEXUS 5 Sensors Fix
it works for everyone..:good:
DoxMAZz said:
Go Here: NEXUS 5 Sensors Fix
it works for everyone..:good:
Click to expand...
Click to collapse
nope, not for me..
I am running PA on my galaxy s4 I9505 International and everything is working fine... Only problem is that sometimes when I get a notification and Hover popes up my screen sometimes flashes black on and off. I believe this is a issue with the framework and that this may be fixed in a future update but in the meanwhile is there anything I can do to fix it? Or do I just have to wait to PA fixes it...
pcmaster44 said:
I am running PA on my galaxy s4 I9505 International and everything is working fine... Only problem is that sometimes when I get a notification and Hover popes up my screen sometimes flashes black on and off. I believe this is a issue with the framework and that this may be fixed in a future update but in the meanwhile is there anything I can do to fix it? Or do I just have to wait to PA fixes it...
Click to expand...
Click to collapse
I'm having exactly the same issue, I've been googling for a while, but found nothing so far! Do you have any new information by any chance?
Hi there,
someone has problems that the touchscreen is not responding?
Have CM11 - current nightly, Fournace kernel 1.0.2 and OPO lockscreen flashed ....,Only the lower right corner is responsive to inputs.
I had the problems also 2 times with the CM11S-ROM.
Has anyone else this problem?
Sun_Dancer said:
Hi there,
someone has problems that the touchscreen is not responding?
Have CM11 - current nightly, Fournace kernel 1.0.2 and OPO lockscreen flashed ....,Only the lower right corner is responsive to inputs.
I had the problems also 2 times with the CM11S-ROM.
Has anyone else this problem?
Click to expand...
Click to collapse
I have the same problem. It's intermittent and goes away after a while but it comes back often enough to make my device unusable when needed. I literally can't answer calls or log into my device because of this. Is no one else having this problem? The issue persists into recovery so it might be hardware.
Franco r13 has new touch drivers implemented. Try it.
OP you say it as if your screen is never responsive, only in the bottom of the screen. That sounds like a RMA.
I will look into Franco r13 tonight. In the meantime, here is how my problem happens:
- Most of the time touch screen is working as expected
- Sometimes the touch screen becomes unresponsive to many areas on the screen, but some small areas still work
- When the above issue occurs, it is only temporary. If I let the phone sit for a few minutes it usually comes back.
- Restarting does not fix the problem, and the problem persists into recovery mode (I forget which recovery I have, but it has touch screen input)
- The problem started with phone being 100% stock, although only after the OTA update a few days ago
notten said:
I will look into Franco r13 tonight. In the meantime, here is how my problem happens:
- Most of the time touch screen is working as expected
- Sometimes the touch screen becomes unresponsive to many areas on the screen, but some small areas still work
- When the above issue occurs, it is only temporary. If I let the phone sit for a few minutes it usually comes back.
- Restarting does not fix the problem, and the problem persists into recovery mode (I forget which recovery I have, but it has touch screen input)
- The problem started with phone being 100% stock, although only after the OTA update a few days ago
Click to expand...
Click to collapse
Yeah, try Franco then. Mine feels better now. It wasn't too responsive before either.
Hello!
My oneplus one is having this issue for a while now, When I plug it in and lock the device, there is a 60~70% chance that the display stays on but its just blank, I have to unlock it and lock it again to fix it.
Recently this also started happening when it was not charging and the screen would often stay on causing massive battery drain :/
This happens on every single rom all the way from CM11S up to CM13 and also oxygen os,...
Does anyone know what the problem is?
Thanks,
Noahvt
I have the same problem since I can remember, also looking for an answer.
I have a similar issue. Sometimes the screen stays on, but is dimmed. A simple double press of the power button resolves it (turn on full, turn off screen) but its mildly irritating. I have only noticed it since being on sultanxdas cm12 ROM. I had an issue with a notification LED app not working since a recent ROM update so uninstalled it. Maybe the issue was related to that app as I cant remember the issue occurring since I uninstalled it a few days ago.
I'm trying to get the notification LED to work while the screen is on.
I've managed to get it working while the screen is off. While that is nice, I want it to work while the screen is off too. I've found this guide and tried it, but it doesn't work on my OPO, which has a different ROM version. I have Xposed and XLED installed.
My situation:
Light Flow Legacy
Omnirom 6.0.1-20160116-find7op-HOMEMADE
Does anybody know a way to get the screen on notification led working? I know it must be possible, because when the phone setting is enabled to show the LED while charging, it does show while screen on or off. However, Light Flow notifications only show while the screen is off.
erikieperikie said:
I'm trying to get the notification LED to work while the screen is on.
I've managed to get it working while the screen is off. While that is nice, I want it to work while the screen is off too. I've found this guide and tried it, but it doesn't work on my OPO, which has a different ROM version. I have Xposed and XLED installed.
My situation:
Light Flow Legacy
Omnirom 6.0.1-20160116-find7op-HOMEMADE
Does anybody know a way to get the screen on notification led working? I know it must be possible, because when the phone setting is enabled to show the LED while charging, it does show while screen on or off. However, Light Flow notifications only show while the screen is off.
Click to expand...
Click to collapse
Not related to your question but get on the Omni nightlies there are some great new additions to the ROM. Don't dirty flash from a homemade though. Clean flash and go through settings, Advanced, more, phone app etc. Also you can edit power profiles with your own CPU and GPU settings for specific apps.
I've never seen a way to have light flow work with screen on. I bought the app ages ago but don't use it ?
Sent from my A0001 using Tapatalk
Renosh said:
Not related to your question but get on the Omni nightlies there are some great new additions to the ROM. Don't dirty flash from a homemade though. Clean flash and go through settings, Advanced, more, phone app etc. Also you can edit power profiles with your own CPU and GPU settings for specific apps.
I've never seen a way to have light flow work with screen on. I bought the app ages ago but don't use it
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Where do I find the nightlies then? I thought I had the latest installed, because I found a thread mentioning the latest stable release being from 2015, so I figured the homemade version I have from 2016 was the latest. However, searching some more yielded http://dl.omnirom.org/find7op/ . Are those the actual nightlies you're talking about?
erikieperikie said:
Where do I find the nightlies then? I thought I had the latest installed, because I found a thread mentioning the latest stable release being from 2015, so I figured the homemade version I have from 2016 was the latest. However, searching some more yielded http://dl.omnirom.org/find7op/ . Are those the actual nightlies you're talking about?
Click to expand...
Click to collapse
Yes those are the ones I'm surprised you replied in the nightlies thread but are still on the homemade builds. Get the latest one and clean flash preferably you won't be disappointed and don't freeze advanced there are some options in there you can try
Sent from my A0001 using Tapatalk
Won't work