Database Info

Huawei Vitria (Y301-A2) Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since it has no thread decided to make a thread for the Vitria since this little thing has potential.
Specs
4 Inch LCD
Quallcomm MSM8930 1200mhz CPU
Rear 5Mp/Front 1.3Mp Cameras
1750mah Battery
1GB Ram
Android 4.1.1
Performance:
Stock
-Quadrant:4,400
-Antutu:11500
Stock Debloated
-Quadrant: 4,950
-Antutu: 13,500
Overclock Kernel(1.7Ghz)
-Quadrant: 6,570
-Antutu: 18,200
Rooting
The Vitria can be Rooted 4 ways
Kingo Root (works with B137 update)
Cydia Impactor(works with B137 update)
FarmaRoot (not recommend but works)
SuperSU CWM Installed(Requires bootloader unlock and CWM)
ENABLE USB DEBUGGING AFTER ROOTING/KEEP IT ENABLED, IF YOU BRICK THIS CAN SAVE YOU FROM HAVING TO COMPLETELY WIPE
Roms(no CWM Needed)
I have uploaded the stock rom from huawei here, its especially useful if you brick and don't have cwm installed.
http://d-h.st/49v
-How to install stock rom(If bricked or otherwise)(Will wipe all data)
- --Copy dload folder to the root of a micro-sd card
- --hold vol up+vol down+power to enter recovery(force mode) and wait for it to finish
--- will reboot when done if not pull battery
--- wipe data as above.
Backed up files
Stock Recovery
http://d-h.st/wB2
Stock Boot.img
http://d-h.st/9QR
-How to restore boot and recovery with adb(can't use fastboot if bootloader locked)
--use dd command in adb
(WARNING)Brick Land
Bootloader Unlock
The bootloader unlock code should be obtained by emailing huawei, try following this layout
URGENT Bootloader Unlock Vitria <-- SUBJECT
- IMEI =
- Serial Number =
- Device =
Be sure to keep it as simple and discrete as possible
Clockworkmod/TWRP
I have built CWM and TWRP for it already, you can find them here.
http://forum.xda-developers.com/showthread.php?p=47234338#post47234338
http://forum.xda-developers.com/and...vitriay301-t2809324/post53999091#post53999091
-How to Install
--flash in fastboot only, not adb(requires bootloader unlocked)
---fastboot flash recovery recovery.img
Roms(CWM needed)
Rooted Deodexed, Zipaligned + Init.d Stock Rom(B132)
http://d-h.st/bkq
-How to install
--Install in CWM
]What to do if you have bricked
YOU NEED ACCESS TO THE STOCK RECOVERY TO RESTORE(If you have CWM or TWRP installed you should know what to do).
If you never updated flash the stock rom with the install method above
http://d-h.st/49v
If you updated use this hacked one instead to downgrade to B132 completely(then simply do the ota update again)
http://d-h.st/6SO
If you screwed the stock recovery and your bootloader is locked but its still accessible via pow + vol down, try to get the bootloader unlock code and reflash the stock recovery once unlocked then reinstall the stock rom
If successful your device should be restored back to out of the box factory state.
Kernel source
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=17935
hope this thread helps

Excellent
Super!!! Finding things for this cellphone is not easy, This is the most complete thread I have found for this cell phone, Thanks
Don't you know if there is any custom rom for this cellphone?

bootloader unlock tool
Ok.. so I got this device super cheap to jump on the unlimited lte for $50 deal metropcs had going. Tried downloading the chinese tool you had listed above, but its chalked full of malware unfortunately. Any other unlock options other than emailing huawei directly [[email protected]] and requesting [which I read on a like thread at android forums]? Did that a week ago with no response. I'm a bit worried this device is not supported anymore because of its age. Could be. Any input/suggestions you might have though are appreciated.
Regards,
Rob

insink71 said:
Ok.. so I got this device super cheap to jump on the unlimited lte for $50 deal metropcs had going. Tried downloading the chinese tool you had listed above, but its chalked full of malware unfortunately. Any other unlock options other than emailing huawei directly [[email protected]] and requesting [which I read on a like thread at android forums]? Did that a week ago with no response. I'm a bit worried this device is not supported anymore because of its age. Could be. Any input/suggestions you might have though are appreciated.
Regards,
Rob
Click to expand...
Click to collapse
devhost kinda sucks now(stopped using them but the old links are still up) and its hard to download from them because of fake link(with adware) next to a real one, anyway the monkeytool was blocked buy huawei over and over until the maker of the software gave up and stopped releasing new versions for it a good while back so I'm gonna remove it.
for unlocking the bootloader I would try to send another email and put URGENT on it, that sped it up for me(on my first vitria) used the tool for another one.
there might be other methods to get the code like the script hack here http://forum.xda-developers.com/and...tory-image-t3008551/post59408408#post59408408 , I tried it but couldn't get it to work though.
personally I don't really use my vitria anymore though but hopefully someone else with chime in and post another method.

I probably clicked the wrong d/l link... over a week w/ no reply from Huawei.. perhaps you could relink the monkey tool & I'll try to be smarter
Called Huawei today 888-5HUAWEI and they gave me same instructions. I then told them it had been over a week with no response; to which, they said if the phone is no longer supported, there will be no response. A nice lil reply of this device is no longer supported would have solved this riddle for me a week ago. But apparently, this method no longer works for this device [emailing official support]; so, I'm gonna have to try some alternative method(s).

Update
I tried to update but I keep getting install abort check software version and I never seen a file Ending in msp.7z is that the right ending

you have to extract that file 7z is a 7zip archive.

Huawei MediaPad M3 Lite 10 Custom ROM and Custom Recovery [TWRP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
This thread is for the MediaPad M3 Lite 10 LTE - Tablet from Huawei.
In my case, I´m looking for a C-ROM and C-Recov (e.a. RR, Mokee, TWRP) for the
Huawei MediaPad M3 Lite 10 LTE (BAH-L09) with Android 7.0 and EMUI 5.1
Since it´s quite new on the market it´s atm hard to find anything bout a C-ROM or even a C-recovery.
discoveries
advises
questions
tipps / tricks
productive discussions
solutions
are much appreciated.
Detailed device Informations:
​
​

Nobody knows any thread about this tablet??

Still searching for a root-solution.
So it's possible to read out the firmware with Infinity Box CM2 but haven't found a working "Non-dongle"-version (Loader).
Some days, there will be a root solution.
It just takes time and will be posted in here.

essayn said:
Still searching for a root-solution.
So it's possible to read out the firmware with Infinity Box CM2 but haven't found a working "Non-dongle"-version (Loader).
Some days, there will be a root solution.
It just takes time and will be posted in here.
Click to expand...
Click to collapse
If you need some help and i can do something, tell me

skymota said:
If you need some help and i can do something, tell me
Click to expand...
Click to collapse
I much appreciate the offer but what could u do if u haven´t the device or do u own it ?
Since my CM2-Infinity-box doesn´t work (usually I work with Miracle Box but it´s not compatible ...well the Tablet has to be rooted to read the firmware..), and literally tried all rooting-apps and progs, this device is really stubborn!

I own this device, thats what i told you

skymota said:
I own this device, thats what i told you
Click to expand...
Click to collapse
Very well. ?
Actually, just the stock-recovery is needed to finally start to compile it. Have u been able to extract the recovery or maybe the whole ROM ? ?

essayn said:
Very well.
Actually, just the stock-recovery is needed to finally start to compile it. Have u been able to extract the recovery or maybe the whole ROM ? ?
Click to expand...
Click to collapse
search and read a lot about this but i cant...

skymota said:
search and read a lot about this but i cant...
Click to expand...
Click to collapse
Well, to bad but I guessed so, since this device is atm not rootable. :/
I tried every single Flash-Box like MB, Infinity, Aladdin, Falcon etc pp.. any Rooting-App (APK & PC- based), almost a dozen flash-tools like ADT, AOS-flasher, Ultimate Backup-tool etc...and several command prompts via ADB&Fastboot.
Really Nothing helped to get a nandroid- or even a dumb ROM. From which I could extract the stock recovery.
Nevermind, I will try alil more with Holo- & Heliumbackup, which surely wont work but who knows, rite ??
I'm patient and as soon as I've found a solution I'll share it here immediately.
As any other user is welcome to do so, too.

I´ve managed to extract the stock-recovery via an OTA-update which came from Firmware Finder from Team MT.
U ´ll find the recovery on G-Drive. The "oldRECOVERY.img" is the extracted stock-recovery from the original BAH-L09C100B018 firmware!
So, since I´ve updated the Tablet, the only "RECOVERY.img"-named file is from the newest firmware which is L09C100B021!
If u wanna update to ...021, via the Firmware Finder-App, u need
The App
Time
Be aside your tablet
and watch this video before u start
May read this thread aswell
​

I bought the BAH-W09 model last week, anyone here unlocked bootloader on the lite 10 yet?

jenkins-1984 said:
I bought the BAH-W09 model last week, anyone here unlocked bootloader on the lite 10 yet?
Click to expand...
Click to collapse
Yup, unlocked the BL from day 1. It´s the same procedure for all HUAWEI devices.
Just go here, login or register, confirm the unlocking agreement and put all device infos into the blank fields.
U´ll immediatley get an unlock code, which u have to enter via fastboot command prompts (recommended):
fastboot devices
fastboot oem unlock-go 1234567890123456 <- (this number is an example, u´ll have to put ur code there instead)
fastboot reboot
From now on an unlocked bootloader message will appear every time u start ur device. Just press power shortly to boot then. (It´s also written in the text aswell)
P.S.
Before u try to unlock: Don´t forget to enable USB-debugging in the Engineertool (tap 7 times on "build" in the settings-menue) and "allow OEM unlocking".

essayn said:
Yup, unlocked the BL from day 1. It´s the same procedure for all HUAWEI devices.
Just go here, login or register, confirm the unlocking agreement and put all device infos into the blank fields.
U´ll immediatley get an unlock code, which u have to enter via fastboot command prompts (recommended):
fastboot devices
fastboot oem unlock-go 1234567890123456<- (this number is an example, u´ll have to put ur code there instead)
fastboot reboot
From now on an unlocked bootloader message will appear every time u start ur device. Just press power shortly to boot then. (It´s also written in the text aswell)
P.S.
Before u try to unlock: Don´t forget to enable USB-debugging in the Engineertool (tap 7 times on "build" in the settings-menue) and "allow OEM unlocking".
Click to expand...
Click to collapse
Ok cheers, I looked on the emui site and was nothing under their tablet menu only phones on the unlock bootloader page, on Nexus you just enable usb-debugging and click the OEM unlock in settings and fastboot flashing unlock in terminal. Sony uses a custom tool and HTC via their website I had a few phones in the past and built roms etc this my first Huawei device apart from my Nexus 6p Huawei help build with Google. I take it this device no official forum atm only the Kirin version.

Ya, HUAWEI has a quite faire unlock policy.
Important: There's an unlock bug sometimes. Be sure to have the Original firmware on ur device. (No updated ROM)
Have fun.

essayn said:
Ya, HUAWEI has a quite faire unlock policy.
Important: There's an unlock bug sometimes. Be sure to have the Original firmware on ur device. (No updated ROM)
Have fun.
Click to expand...
Click to collapse
It's on latest official that came with device, I take it there is no twrp or anything out for this device ATM?

Just check a view posts above. I've described how to get the newest FW.
So if the factory ROM-version is installed, unlock the BL and after then update ur ROM. Jfi.
BTW_
Atm there's no custom recovery available for the M3 Lite Versions. U have to compile it by urself or make a request on Hovatek.com

essayn said:
Just check a view posts above. I've described how to get the newest FW.
So if the factory ROM-version is installed, unlock the BL and after then update ur ROM. Jfi.
BTW_
Atm there's no custom recovery available for the M3 Lite Versions. U have to compile it by urself or make a request on Hovatek.com
Click to expand...
Click to collapse
I'm not bothered about updating the firmware ATM more so custom recovery but will look into it after my holiday.

I have requested official forum for this device and looks to be accepted so hopefully get some development going for this device soon...

There seems to be no way to retrieve the unlock code for Wifi-only tablets from the official Huawei site, as it demands the IMEI which is obviously missing.
I have contacted Huawei support with the product ID and serial number of my M3 Lite 10. One day later I have received the unlock code. I think that having been polite has helped
.

Storage question
Hello,
First of all: sorry, if the question is 'noobish', but as a matter of fact I am noob as far as android is concerned
I just bought this tablet for my son (LTE version), and I was quite surprised to find out that I can't move the installed applications to SD card.
Are there any hints and tips on how to take advantage of the big SD card, so my son's game data would not have to be stored in the internal memory?
The only default option is to change the memory from internal to SD, after the tablet restarts. But I assume it uses then only the SD card, and I am looking for a solution I remember from Samsung phone, where I could choose certain apps to move from internal memory to SD.
Another question, just by the way, is following: when I install an apk file from the SD card, during the installation process every few seconds I get a pop-up saying the application is not responding (although the installation is in progress). Any way to disable those annoying pop-ups?
I'd appreciate any feedback

Lenovo Smart Tab P10 TB-X705F aka ZA440169US

So what do you folks think of the new Lenovo Smart Tab P10? I just ordered one because my LG G Pad 8.3 v500 is very long in the tooth and I finally just got tired of waiting for a good spec tablet with plenty of storage and memory to show up. It only has a midrange Snapdragon 450, but the storage a memory make up for that.
https://www.lenovo.com/us/en/smart-tab/
I was looking for a owners manual to read and found this. Looks like replacing the battery in the future won't be too bad. I'll cross my fingers and hope that the bootloader is unlockable.
https://download.lenovo.com/consumer/mobiles_pub/tab_p10_hmm_en_201812.pdf
https://fccid.io/O57TBX705F/User-Manual/User-Manual-R1-pdf-4117204.pdf
Open Source Code
TB-X705F (Wi-Fi)
https://support.lenovo.com/us/en/downloads/DS506312
TB-X705L (LTE)
https://support.lenovo.com/us/en/downloads/DS506313
Stock Roms
TB-X705F (Wi-Fi)
Lenovo TB-X705F_USER_S000017_20180831_Q00020_ROW Factory ROM [androidhost.ru].zip
TB-X705L (LTE)
Lenovo TB-X705L_USER_S000023_20180921_Q00020_ROW Factory ROM [androidhost.ru].zip

I received my Lenovo Smart Tab P10 (TB-X705F) a few weeks ago. It's a nice tablet with good features. The only thing I'm struggling with is unlocking the bootloader. The developer options have the "Allow OEM unlocking" setting and I've enabled it, but no unlock commands are recognized when in fastboot mode. The error is "FAILED (Unknown command)". I've tried "fastboot oem unlock", "fastboot oem unlock-go", "fastboot flashing unlock" etc.

I hope Amazon didn't force Lenovo to lock down the bootloader because it has Alexa poopoo installed. I figure there will be a Chinese exploit for this and the LTE version eventually.
I couldn't stand Alexa and disabled it. I'm looking forward to TWRP so I can make a backup, root and install Adaway.

Same here....
Hey guys, I got the same issue, all unlock commands are unknown. Has anybody got a fix yet?

I had no problem with the bootloader, Tb-x704v. Install most recent https://devsjournal.com/download-minimal-adb-fastboot-tool.html it solved some of my issues.

I bought one a few weeks ago... No dock though. Seems ok, their os is pretty slim though, can't wait for some development.

it is project treble supported but still no lineage 16.1 (pie)? for lenovo tab P10 TB-X705L

Hi, you should be able to unlock bootloader with this command:
fastboot oem enable-unlock-once

TWRP
I installed the TWRP Builder app, but it couldn't extract the recovery image and build.prop file because I don't have root. Do you think that a TWRP recovery can be made from the older firmware in my first post? It has a recovery.img file, but couldn't find a build.prop file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How do we get this device in to it's only device thread? When you search for it through "my device" in the xda app it doesn't come back with a correct result. Maybe it will also get more community development by doing that.

Any hope lineage 16.1 for lenovo tab P10

Hello all,
Any developments on this device. What are the chances of getting rid of the echo features and make it a Google assistant instead?

Can anybody share the alexa show mode apk? I'm downloading the firmware but it is taking ages

Any one been able to install the Google Now Launcher in this tablet? The Play Store message says that it's incompatible with this tablet.
Thanks for any assistance!

Did anybody try to unlock the bootloader in Linux?
I successfully rooted Z3 Play in Linux while it didn't work in Windows
Can anybody find full ROM in lollinet (where I can find Moto/Lenovo ROM)?

I've tried installing the stock images that are posted and keep getting a signature error using the recovery. I noticed that the image doesn't have a system.img but rather system_1.img-system_32.img. Is there a way to package the system files to install the new system? Having an issue with the OTA and it keeps wanting to install the PRN rather than the ROW image. Any thoughts?

Anyone successfully root this as of yet? Not seeing any TWRP for it or an approach.

I today received an update to Android 9 on my tablet. Was kind of surprised. Anyone else can confirm?
Update contains new "Le Tab UI".

so there is no way to root this tablet?

gforums said:
I today received an update to Android 9 on my tablet. Was kind of surprised. Anyone else can confirm?
Update contains new "Le Tab UI".
Click to expand...
Click to collapse
Confirmed. I'm at Android 9 after an OTA update.
Chaser
---------- Post added at 08:27 PM ---------- Previous post was at 07:58 PM ----------
ZHIONZY said:
so there is no way to root this tablet?
Click to expand...
Click to collapse
My tablet is rooted. I found a root solution a little while back, but I haven't posted it yet because it's not very user-friendly. Basically it requires that you do a fresh install of Oreo and it gets bricked on an OTA update. If you're interested in getting it rooted like that then send me a private message. If there's enough interest I'll create a root thread. I consider myself quite capable with Android but not a full expert. I'm really hurting without custom recovery and without a fastboot OEM unlock that works longer than once. That temporary unlock command successfully allows me to swap out the bootloader image but upon reboot it doesn't like the new image as it asks for a password that must be part of the bootloader security because it won't accept any passwords that I have set. Perhaps with a root thread we could all contribute to getting this working. I have two of P10s now so I'm able to test on my spare, but I don't have unlimited time to devote to this.
I know that a lot of people would be excited to get root on this device. I assure you sure you that it is possible. However, I don't want to start a thread with a solution that will force people to do a fresh install of Oreo and possibly lose data. And of course there's the problem with the OTA update which will brick the device. Of course everyone understands that they modify their device at their own risk, but I consider my root solution still a bit dirty and I was hoping at least to get it to accept OTA updates before I wrote up a root guide. I really think that if we could get a permanent bootloader unlock instead of a temporary unlock that we could get past this problem. And if somebody is out there that could make a TWRP image for this device, I think we would be golden as we could do a standard magisk root install via custom recovery.
Chaser

General [Download] P11(TB-J606) Android 11 Global ROM

Android 11 Global ROM
WIFI:
https://rsdsecure-cloud.motorola.com/download/TB-J606F_S320029_210923_ROW.zip
LTE:
https://rsdsecure-cloud.motorola.com/download/TB-J606L_S320030_210923_ROW.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@qwer1335 I've changed the prefix of your thread from "Development" to "General" as the thread didn't qualify for the first one. Please review the sticked guidances of the responsible moderators' team prior to your next posting and do not change the prefix back! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

Updated with LMSA with no issues, only be warned that everything is deleted and you start from scratch. I had my bootloader unlocked, this was kept. But I am unable to root it as I did with Android 10. Patching boot.img with Magisk and I get bootloop to fastboot after flashing it. Only way to continue as of now was to flash the boot.img that came with the new firmware.

Hallux_ said:
Updated with LMSA with no issues, only be warned that everything is deleted and you start from scratch. I had my bootloader unlocked, this was kept. But I am unable to root it as I did with Android 10. Patching boot.img with Magisk and I get bootloop to fastboot after flashing it. Only way to continue as of now was to flash the boot.img that came with the new firmware.
Click to expand...
Click to collapse
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.

i tried but the link doesn't work
EDIT: i tried from rescue and smartaassistant, and i found the update

asukav said:
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
Click to expand...
Click to collapse
I have the global version.

Hallux_ said:
I have the global version.
Click to expand...
Click to collapse
Then that's not a problem.
Can you guide me how to unpack the img files? I tried several but none of those works correctly.
I just want to do some research on what kind of restrictions lenovo does to the rom files.
Thank you.

asukav said:
Then that's not a problem.
Can you guide me how to unpack the img files? I tried several but none of those works correctly.
I just want to do some research on what kind of restrictions lenovo does to the rom files.
Thank you.
Click to expand...
Click to collapse
Sorry, I am not sure if it is what you are looking for, but I downloaded the new ROM with LMSA and I do have all the IMG files in the download directory. I do not know if you can do the same not having the exact same tablet model.

asukav said:
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
Click to expand...
Click to collapse
i recently install this rom but have "system and hardware not compatible, can you intsall android 11 on chinese lenovo p11 tablet?

famicom9x said:
i recently install this rom but have "system and hardware not compatible, can you intsall android 11 on chinese lenovo p11 tablet?
Click to expand...
Click to collapse
Still a "NO". It's the same: "system and hardware not compatible".
So I flash back to 0520.
I do hope I could spare some time to unpack those imgs to have a check on some specific files next week.
Just be busy all the time with my work...
Engineers from Lenovo China give me no useful answers. I think I can only count on myself.

I tried update to 210923 via LMSA, but not boot.
Then I tried again with qpst 2.7.496, it boot up and get a minor update to 0925.
Still lost serial number.

Que??

Have a new ROM in https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S320109_211207_ROW.zip but after i flash with QPST 2.7.496 still "system and hardware not compatible". Need someone fix it.

tnt1212 said:
Have a new ROM in https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S320109_211207_ROW.zip but after i flash with QPST 2.7.496 still "system and hardware not compatible". Need someone fix it.
Click to expand...
Click to collapse
It's because your device is Region locked. Within this XDA there is a forum on how to region unlock ur device. You have to use QCN file to change it.
Mine won't update because of region lock and now it's working perfectly

Hey guys, do you know if we still have widevine L1 after updating this ROM with locked bootloader?

moto g pure fastboot magisk_patched image error

i have a moto g pure from xfinity mobile i found a stock zip file using the lenovo rsa i then copied the boot image then ran it through the magisk app i then fast boot it and this is the error i get i did oem unlock in settings and also fastboot oem unlock it sends to phone then starts to write and this is the error can someone smarter please help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

moderater sorry im new please foward to appropiate forum thank you

My guess is you've a driver problem.
Use the driver offered here:
Where can I download the USB drivers for my device?| Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.Where can I download the USB drivers for my device?
motorola-global-portal.custhelp.com

jwoegerbauer said:
My guess is you've a driver problem.
Use the driver offered here:
Where can I download the USB drivers for my device?| Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.Where can I download the USB drivers for my device?
motorola-global-portal.custhelp.com
Click to expand...
Click to collapse
not a driver problem its a failed verification on the stock patched.img through magisk diferent verifiction key for the two images

OK

So did you ever get it figured out? I have the moto g pure as well. I have it bootloader unlocked but have been unable to find a boot.img to try to use Magisk on. The stock file I tried to get from the Motorola tool keeps giving me an error saying the file failed to decompress....

Agent_Orange1488 said:
So did you ever get it figured out? I have the moto g pure as well. I have it bootloader unlocked but have been unable to find a boot.img to try to use Magisk on. The stock file I tried to get from the Motorola tool keeps giving me an error saying the file failed to decompress....
Click to expand...
Click to collapse
No I never did how did you get your bootloader unlocked?

Agent_Orange1488 said:
So did you ever get it figured out? I have the moto g pure as well. I have it bootloader unlocked but have been unable to find a boot.img to try to use Magisk on. The stock file I tried to get from the Motorola tool keeps giving me an error saying the file failed to decompress....
Click to expand...
Click to collapse
Newportswag74 said:
No I never did how did you get your bootloader unlocked?
Click to expand...
Click to collapse
There is your boot img

Newportswag74 said:
There is your boot img
Click to expand...
Click to collapse
Thanks a ton!!! Bootloader unlock was simple for me (T-Mobile). https://androidbiits.com/unlock-bootloader-motorola-moto-g-pure-xt2163-4-easily/
The guide at this link worked perfectly for me!! I will let you know how Magisk root goes

Agent_Orange1488 said:
Thanks a ton!!! Bootloader unlock was simple for me (T-Mobile). https://androidbiits.com/unlock-bootloader-motorola-moto-g-pure-xt2163-4-easily/
The guide at this link worked perfectly for me!! I will let you know how Magisk root goes
Click to expand...
Click to collapse
Really when I tried that at the Lenovo website it said my pure wasn't eligible

did patching that boot work?

i managed to patch the latest firmware with march security update, and root the stock rom, now i need to mess with gsis