HI guys
I have lg optimus g e975 4.4.2
I have deleted 2 files from thousants files inside LGSystemUI.apk
So I got com.android. . . force close & also touch Stopped working!
As I have the copy of the original APK ,my only problem is that I cant restore it to \system\priv-app .
USB Debug is on- I can access my internal storage - I cant access recovery & I dont have custom recovery & the boot loader is locked!
There must be a way since debug is on! I dont khow, maybe like flashing that APK somehow!!!
Please dont tell me to flash a rom cause I'm noob at flashing roms & frightened about that!
I've tried adb but it says PHONE UNAUTHORIZED & I cant agree the request because touch is not working anymore!
PLEASE tell me if you know some way to access system folders from computer or sth so I can replace file with the original one!
It's been 2week ,I've searched alot & My LAST HOPE IS TO GET SOME HELP THERE.
sorry for English wrongs... any help & I'll be so thankful!
Hi,
Unfortunately with a locked bootloader, no custom recovery and USB debugging disabled.... You won't have any luck. The best thing you can do now is flash the stock firmware, Here's a guide on that,
http://forum.xda-developers.com/showthread.php?t=2010624
Good luck!
Related
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hi Xda Friends,
Pls Help me out !!! i think i soft bricked my phone ???
I accidentally Deleted all system files from my Oneplus through external PC based Teamwin Recovery, Now My Phone is hung on start up with just the Oneplus sign, not booting ahead,
I can do a Fastboot & a System restore, but my Adb is not getting recognized by my PC & So Debug mode Not possible & i cant load anything from USB OTG !!
Also i can only see CM system files in my phone no recovery files as all was accidentally deleted while i was installing a custom Rom !!!
Any Concrete step to reload my CMs 12 OS would be very helpful,
:crying::crying::crying:
Arya10 said:
Hi Xda Friends,
Pls Help me out !!! i think i soft bricked my phone ???
I accidentally Deleted all system files from my Oneplus through external PC based Teamwin Recovery, Now My Phone is hung on start up with just the Oneplus sign, not booting ahead,
I can do a Fastboot & a System restore, but my Adb is not getting recognized by my PC & So Debug mode Not possible & i cant load anything from USB OTG !!
Also i can only see CM system files in my phone no recovery files as all was accidentally deleted while i was installing a custom Rom !!!
Any Concrete step to reload my CMs 12 OS would be very helpful,
:crying::crying::crying:
Click to expand...
Click to collapse
Your best option is to use fastboot to flash the stock images. Go to my guide thread and follow section 8:
http://forum.xda-developers.com/showthread.php?t=2839471
Thanx Heisenberg
Thanx a Lot,
Will try this out & revert asap !!
Thanx a million Heisenberg
Thanx a million Heisenberg, I have restored my phone in full working state, by exactly following your written procedure,
U r a Savior brother, Massive Respect & Big Hugs, Keep doing yo great work & stay Blessed
Arya10 said:
Thanx a million Heisenberg, I have restored my phone in full working state, by exactly following your written procedure,
U r a Savior brother, Massive Respect & Big Hugs, Keep doing yo great work & stay Blessed
Click to expand...
Click to collapse
Awesome news, glad to see you got it fixed, and you're welcome.
i've edited build.prop for adding multiuser on my mito a260, then i restart it..
it is bootlooped now
here is the situation
mito a260+ stock rom
stock kernel
rooted with SU on it
Running on lollipop
I wish not to lose my datas
can access to computer, but USB couldnt recognize it.
it is stuck on logo,not restarting or anything. n everytime i try to switch off, it turned on again by automatic.
please help, i need this phone for my work.
thx in advance
XDA Visitor said:
i've edited build.prop for adding multiuser on my mito a260, then i restart it..
it is bootlooped now
here is the situation
mito a260+ stock rom
stock kernel
rooted with SU on it
Running on lollipop
I wish not to lose my datas
can access to computer, but USB couldnt recognize it.
it is stuck on logo,not restarting or anything. n everytime i try to switch off, it turned on again by automatic.
please help, i need this phone for my work.
thx in advance
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I see you have made it to the location I was going to suggest:
http://forum.xda-developers.com/showpost.php?p=63315776&postcount=12473
Unfortunately it is getting buried fast. I looked at that post as well. If you cannot authorize yourself to mount system and push the right file back via stock recovery (something that you can rarely do anyway), sadly you have too few options.
Only thing you can do is try to find a fastboot image to reflash system, if your device supports fastboot that is (alternatively, if you have download mode, an image for that). But for a rare device, you would end up having to deal with the manufacturer anyway, so your best bet may be getting it repaired by them.
Sorry, but I hope that helps.
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data.
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me!
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
If i connect usb cable to phone, instalation started, but its stuck on 90%
Phone is unlocked, but adb dont see my phone in fastboot mode!
Im write another thread because in http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
no one want to help me!
refresh
ShowMustGoOn said:
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data.
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me!
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
If i connect usb cable to phone, instalation started, but its stuck on 90%
Phone is unlocked, but adb dont see my phone in fastboot mode!
Im write another thread because in http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
no one want to help me!
Click to expand...
Click to collapse
Thread closed.
Duplicate:
http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
Do not duplicate posts. Be patient and wait for a response in your original thread.
I
Have a problem with myphone. I had just rooted the phone and i started deleting files too free up space, and i must have deleted some important file and my phone just stopped working. Now when i try to power the phone on is gets into loop boot. I cant acesses recovery mode to restore fabric system. I tried to use flashtool to get a new firmware but they say phone is locked.
Is there any way you can help me?
I have a Sony Xperia E3 with android 4.4.2.
Hope you can help.
Hi !
Have a look at this thread
https://forum.xda-developers.com/xperia-e3/general/noob-friendly-root-recovery-installation-t2989689
Also , if you`re on android 4.4.4 , maybe you weren`t sure about the android version , here
https://forum.xda-developers.com/xperia-e3/general/simplified-guide-to-root-sony-xperia-e3-t3012248
You may also start questioning there , more users may be around
Good luck !