Related
xt926 with unlocked bootloader and can run 10.1 nightly from get.cm with no problem. However, when I install a 10.2 nightly - whether from get.cm, epinter, dhacker or skrilaz - even though the initial boot comes up clean, rebooting after the initial boot gets stuck on the boot logo.
I have tried different recovery images - cwm, twrp, oudhs - and different versions of each.
I have tried clean installs, full formats and dirty upgrades from 10.1.
I have tried multiple force boots from this state (power+vol up).
I have tried with and without the updated gapps and UPDATE-SuperSU-v1.51.zip.
Restoring from backup does not get past this hang. The only way out is to revert to stock (I use mattlegroff's DROID_RAZR_HD_Utility_1.21).
Does anyone have any idea how I might get past this or even get a log?
Only thing that fixed this for me was to flash back to stock 4.1.2, flash newest CWM touch recovery, then flash newest nightly, Gapps, and SU. Then, a popup comes up saying something about the ROM wants to flash your boot image, and asks if you'd like to fix this. I answered YES (fix) and been working since.
Any chance you could link where you got your recovery and SU?
Much appreciated.
Same issue here...
I've also tried everything listed above. I've done everything i can possibly think of to get cm 10.2 on my xt926. For some reason my phone just isn't making it after the first reboot. I've searched and found similar issues but none of the troubleshooting has been working for me. I hope to find a way around this. I need that 10.2!
Same issue here. Not just CM, every 4.3 based ROM I've tried has either failed to boot or failed to boot more than once (more often than not, they won't boot at all).
I've been at this for hours, but I've had no success so far. I'll let you know if I come up with anything.
EDIT:
Here's my setup:
After every try, I flash back to stock 4.1.2 with VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC.xml. I've edited it so it doesn't flash the stock recovery and so it flashes a modified logo that doesn't show the bootloader warning. Partway through, I booted up and updated to the latest OTA, so I had to comment out the tz.mdm files as well. I was using TWRP 2.2.2.1, but I updated to 2.6.0.0 earlier.
GeorgeHahn said:
Same issue here. Not just CM, every 4.3 based ROM I've tried has either failed to boot or failed to boot more than once (more often than not, they won't boot at all).
I've been at this for hours, but I've had no success so far. I'll let you know if I come up with anything.
EDIT:
Here's my setup:
After every try, I flash back to stock 4.1.2 with VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC.xml. I've edited it so it doesn't flash the stock recovery and so it flashes a modified logo that doesn't show the bootloader warning. Partway through, I booted up and updated to the latest OTA, so I had to comment out the tz.mdm files as well. I was using TWRP 2.2.2.1, but I updated to 2.6.0.0 earlier.
Click to expand...
Click to collapse
one of 2 things should fix this problem,
use cwm 6.0.3.5 from here or
go to recovery/mounts and storage and format the data-media line (i know it says sd card but its internal, do not format the external ed card line or you will loose data on it)
also i updated matts utiliity to the latest ota, so you dont have to take the ota just to get the baseband. its in the dev forum. i will be updating it to a newer version if you wait until later, with the newest recoveries.
edit, btw 2.6.0.0 is not the latest twrp although i recommend using cwm as some have had issues with twrp including me.
First off, the latest TWRP seems to have fixed the problems (for me, anyway). Second, you'll need to use the most up-to-date GAPPs when you flash. Also, a lot of people have noted that mounting sytem prior to doing their wipes has solved the reboot issues.
Thanks a ton for the help. Flashed latest CWM and bumped up to 4.4 and everything's working fine. I appreciate the help!
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
A lot of users report issues not being able to flash rom's on 4.4.2 kitkat.
A fix is to downgrade to 4.3, then flash roms.
I dont know why. I bought my device upgraded to 4.4.2 already, and i can flash roms with no issues.
Search the forum for the topic and you will find the info you need.
Roshi69 said:
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It wont backup saying what error?
Twrp just said 'failed' in red writing after the data backup I think. And philz touch said something along the lines of Not being able to write a file into the \clockworkmod folder.
I bought the device with 4.4.2 on it and followed the guides after reading up about the problems etc but TWRP 2.7.0.0 had a lot of reports that everything was working on it so went ahead with it
Sent from my Nexus 5 using Tapatalk
Ya that's strange because philz works great for me. Do you have a USB otg to try an external backup?
Sent from my XT1032 using Tapatalk
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Roshi69 said:
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Click to expand...
Click to collapse
Why dont you use Clockwork mod recovery for flashing Rom. I have flashed 10 Roms with that and all are backed up with out any problems. TWRP has no official support for moto g, and instead of all that why don't you try Cyanogenmod ?
(sorry if my english is not perfect)
Hello,
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
I never had such problems on my Nexus..
Please help me, I don't know what's going on
TheSkweed said:
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
Click to expand...
Click to collapse
Same here. It may be possible to downgrade to 4.3 (see here), but would it then be possible to flash a 4.4.2-based custom ROM ? I'm not sure.
Heres the steps I took.
*******Before device was stuck at bootloop*******
1. Bought phone (XT1032)
2. unlocked boot loader
3. Rooted
4. Flashed Philz Recovery (wouldn't backup rom)
5. Flashed TWRP and CWM with same issue.
6. Flashed 2 ROMs to try it (TweakyOne + C-Rom, Both wouldn't boot. and tried on all recoveries.
********Steps after being stuck at bootloop*******
1. Followed this amazing guide here (https://www.youtube.com/watch?v=laU6NQ0LxR0)
2. Set up the stock ROM again
3. Flashed TWRP 2.7.0.0 via Fastboot
4. Backup worked successfully
5. installed CM11 and setup successfully
6. installed Lego rom just to assure myself (currently running this ROM)
I know this is no solution at all but just wanted to share my steps to see what maybe fixed my phone. possibly the stock 4.2.2 rom I flashed was the solution. Maybe the original factory ROM that came on the phone was the issue?
Hello guys,
I installed cm-13 successfully and it was operating fine until yesterday. Today I tried to install a theme or something and it hung. So i just felt like doing a factory reset and I did it through my cwm recovery. But before that i made a backup, then i did the reset, then i did the restore...ever since then i havent been able to open the OS...it gets stuck on the samsung GALAXY Tab2 10.1 screen. I can however access the cwm recovery. I did infact try to unzip the cm-13 that i had previously used, and it doesnt work...
Please help guys!
I am pretty new to this and i feel like i cant figure out what to do next.
Is there a way to maybe restart the whole process, like get rid of the cm-13 that is already installed and redo the whole thing again?
Kindly help guys, i was really enjoying the cm experience and i messed it up :/
killermara said:
Is there a way to maybe restart the whole process, like get rid of the cm-13 that is already installed and redo the whole thing again?
Kindly help guys, i was really enjoying the cm experience and i messed it up :/
Click to expand...
Click to collapse
you did a backup before factory reset, then you restored the same data after reset. this hardly changed anything. the reason it didn't boot, is that The problem lies at the system partition, you should wipe system partition, data partition as well and flash the same cm-13 zip again along with gapps, if you had.
now let the system start. it should boot up with a clean installation. you can then try to advance restore and chose only data partition.
later just switch to twrp recovery by Android-Andi
HELP!
billysam said:
you did a backup before factory reset, then you restored the same data after reset. this hardly changed anything. the reason it didn't boot, is that The problem lies at the system partition, you should wipe system partition, data partition as well and flash the same cm-13 zip again along with gapps, if you had.
now let the system start. it should boot up with a clean installation. you can then try to advance restore and chose only data partition.
later just switch to twrp recovery by Android-Andi
Click to expand...
Click to collapse
Hello, actually I did exactly that, i wiped system partition and all of that...then i did try with cwm, and it didnt work, what is happening is that i select the option to flash the ROM, then the screen goes blank for a second and comes back to the home screen of the cwm recovery. So basically i selected the zip and nothing happened! I then tried flashing using twrp and the problem now was that there was the "no md5 file found" message and the installation would not stop, it would go on for too long, like some sort of loop. I then switched back to cwm and tried again and it still doesnt seem to work...kindly advice on what to do next
killermara said:
Hello, actually I did exactly that, i wiped system partition and all of that...then i did try with cwm, and it didnt work, what is happening is that i select the option to flash the ROM, then the screen goes blank for a second and comes back to the home screen of the cwm recovery. So basically i selected the zip and nothing happened! I then tried flashing using twrp and the problem now was that there was the "no md5 file found" message and the installation would not stop, it would go on for too long, like some sort of loop. I then switched back to cwm and tried again and it still doesnt seem to work...kindly advice on what to do next
Click to expand...
Click to collapse
first thing check if you have updated to last official stock jellybean rom prior to cm13 upgrade.
this thread will help you to update your bootloader to jb from ics. if you have a jb bootloader already. you can skip this.
forum.xda-developers.com/showthread.php?t=2642005
next thing you should get twrp 3.0.2.8
https://www.androidfilehost.com/?w=files&flid=48848&sort_by=date&sort_dir=DESC
after wiping, restart recovery, then flash the Rom zip
it takes time with the new CM13 builds to complete installation. some earlier twrp recoveries had issues(3.0.0.1 and 0.2, not sure right now, try latest only). cwm is not supported and twrp is the only preferred recovery by the Rom developers to flash the newer roms.
remember p5100 tab is called espresso3g now, since development has been unified. you need files marked as espresso3g for your p5100.
I don't which files are you using, development has changed so confirm the files that you're using are for unified builds and not device specific.
billysam said:
first thing check if you have updated to last official stock jellybean rom prior to cm13 upgrade.
this thread will help you to update your bootloader to jb from ics. if you have a jb bootloader already. you can skip this.
forum.xda-developers.com/showthread.php?t=2642005
next thing you should get twrp 3.0.2.8
https://www.androidfilehost.com/?w=files&flid=48848&sort_by=date&sort_dir=DESC
after wiping, restart recovery, then flash the Rom zip
it takes time with the new CM13 builds to complete installation. some earlier twrp recoveries had issues(3.0.0.1 and 0.2, not sure right now, try latest only). cwm is not supported and twrp is the only preferred recovery by the Rom developers to flash the newer roms.
remember p5100 tab is called espresso3g now, since development has been unified. you need files marked as espresso3g for your p5100.
I don't which files are you using, development has changed so confirm the files that you're using are for unified builds and not device specific.
Click to expand...
Click to collapse
I followed all the steps that you suggested, and the thread suggested.
I installed custom recovery, then I updated the bootloader.
Then i flashed the new twrp, which is alot more easier to operated compared to the cwm .
then i wiped , restarted recovery, then flashed the rom,
the exact same thing that was previously happening with the cwm happened : I tapped on the rom, then a blank screen appeared and it went back to the main menu of the twrp...
The ROM i am using is: cm-13.0-20160220-1347-UNOFFICIAL-p5100.zip
i also tried using the ROM i got from get.cm : cm-11-20160822-NIGHTLY-p5100.zip
Okay so i played a slow mo video to see what the screen says before it goes back to the welcome screen:
Updating partition details. . .
. . . done
Full SElinux support is present.
MTP Enabled
Then after this pops up, it goes back to the main menu of the twrp.
What if i just reinstall the stock OS then do the whole process of getting cyanogenmod again from rooting onwards?
Kindly assist!!
killermara said:
I followed all the steps that you suggested, and the thread suggested.
I installed custom recovery, then I updated the bootloader.
Then i flashed the new twrp, which is alot more easier to operated compared to the cwm .
then i wiped , restarted recovery, then flashed the rom,
the exact same thing that was previously happening with the cwm happened : I tapped on the rom, then a blank screen appeared and it went back to the main menu of the twrp...
The ROM i am using is: cm-13.0-20160220-1347-UNOFFICIAL-p5100.zip
i also tried using the ROM i got from get.cm : cm-11-20160822-NIGHTLY-p5100.zip
Okay so i played a slow mo video to see what the screen says before it goes back to the welcome screen:
Updating partition details. . .
. . . done
Full SElinux support is present.
MTP Enabled
Then after this pops up, it goes back to the main menu of the twrp.
What if i just reinstall the stock OS then do the whole process of getting cyanogenmod again from rooting onwards?
Kindly assist!!
Click to expand...
Click to collapse
OKAY! So i have had some progress in the situation i got myself into! Now i just changed the sd card and tried to flash the ROM, so it didnt successfully flash, it says:
Zip file is corrupt!
Error installing zip file ..*the directory of the ROM*
This doesnt make sense though because i used the exact same ROM earlier and it worked, i used it for a whole day and it was fine...
killermara said:
OKAY! So i have had some progress in the situation i got myself into! Now i just changed the sd card and tried to flash the ROM, so it didnt successfully flash, it says:
Zip file is corrupt!
Error installing zip file ..*the directory of the ROM*
This doesnt make sense though because i used the exact same ROM earlier and it worked, i used it for a whole day and it was fine...
Click to expand...
Click to collapse
do what @billysam said.
dont use device specific stuff. the latest twrp will only work with unified builds. for your device you need espresso3g builds.
you will find the latest roms on android-andis github site http://andi34.github.io/index.html
killermara said:
OKAY! So i have had some progress in the situation i got myself into! Now i just changed the sd card and tried to flash the ROM, so it didnt successfully flash, it says:
Zip file is corrupt!
Error installing zip file ..*the directory of the ROM*
This doesnt make sense though because i used the exact same ROM earlier and it worked, i used it for a whole day and it was fine...
Click to expand...
Click to collapse
you're using device specific Rom build, cm13.0 unofficial p5100, the latest twrp recovery you have, is a unfied espresso3g one.
latest roms, are build upon espresso3g for p5100,p3100 and espressowifi for p5110,p5113 p3113.
use latest cm13 rom zip, marked espresso3g.
there are device specific roms and recovery, which developers have stopped working on, your issue is because of this. get unified recovery and rom.
billysam said:
you're using device specific Rom build, cm13.0 unofficial p5100, the latest twrp recovery you have, is a unfied espresso3g one.
latest roms, are build upon espresso3g for p5100,p3100 and espressowifi for p5110,p5113 p3113.
use latest cm13 rom zip, marked espresso3g.
there are device specific roms and recovery, which developers have stopped working on, your issue is because of this. get unified recovery and rom.
Click to expand...
Click to collapse
Yea i thought so too, thats why i downloaded the cm-13.0-20161117-NIGHTLY-espresso3g.zip, then i wiped and tried to flash this rom, this also gave me the same error,
i also noticed that before the lines
Zip file is corrupt
there was:
Checking for MD5 file. . .
Skipping MD5 check: no MD5 file found.
killermara said:
Yea i thought so too, thats why i downloaded the cm-13.0-20161117-NIGHTLY-espresso3g.zip, then i wiped and tried to flash this rom, this also gave me the same error,
i also noticed that before the lines
Zip file is corrupt
there was:
Checking for MD5 file. . .
Skipping MD5 check: no MD5 file found.
Click to expand...
Click to collapse
maybe the zip got corrupted, checked your pc with anti-virus? are you downloading the zip file from androidfilehost of android-andi? or some other source? checked your sd card as well?
I recently purchased a Verizon Pixel and successfully unlocked it, installed TWRP RC1, ROM and EX Kernel. I notice, however, that I cannot flash any other zips such as Viper4Android, WETA, etc. This makes no sense to me but after trying to flash these other zips (all of which say successful) nothing is ever installed after a reboot and files do not appear in the expected directory locations. Anyone have any idea what I am missing? I have never seen anything like this before.
Thanks!
bradld said:
I recently purchased a Verizon Pixel and successfully unlocked it, installed TWRP RC1, ROM and EX Kernel. I notice, however, that I cannot flash any other zips such as Viper4Android, WETA, etc. This makes no sense to me but after trying to flash these other zips (all of which say successful) nothing is ever installed after a reboot and files do not appear in the expected directory locations. Anyone have any idea what I am missing? I have never seen anything like this before.
Thanks!
Click to expand...
Click to collapse
After flashings the ROM; do you reboot to recovery before you flash the mods? You need to either reboot to recovery or boot to the system at least once before flashing any mods. When you flash a ROM, it gets flashed to the slot that is currently inactive. The mods will get flashed to slot the is currently the active slot. So, if you don't reboot before you flash the mods, they get flashed to the wrong slot. That's about the only thing I can think of that would cause this issue.
robocuff said:
After flashings the ROM; do you reboot to recovery before you flash the mods? You need to either reboot to recovery or boot to the system at least once before flashing any mods. When you flash a ROM, it gets flashed to the slot that is currently inactive. The mods will get flashed to slot the is currently the active slot. So, if you don't reboot before you flash the mods, they get flashed to the wrong slot. That's about the only thing I can think of that would cause this issue.
Click to expand...
Click to collapse
Yes, have rebooted to recovery numerous times. Zips appear to flash and on reboot to ROM, nothing! Zips with save log features return an error as if nothing is writing to memory.
I have returned to factory image and repeated everything, no change.
I have only booted to TWRP for installing zips, and I haven't installed TWRP on my phone. When booting TWRP RC1, I've had it fail to install zips multiple times. I think the times it failed I didn't get the initial opening information. Honestly I didn't look into it very much, because I just booted Alpha 2, and that installs zips just fine when RC1 doesn't work for me. If someone has rooted their phone, I think FlashFire can probably also install zips.
bradld said:
I recently purchased a Verizon Pixel and successfully unlocked it, installed TWRP RC1, ROM and EX Kernel. I notice, however, that I cannot flash any other zips such as Viper4Android, WETA, etc. This makes no sense to me but after trying to flash these other zips (all of which say successful) nothing is ever installed after a reboot and files do not appear in the expected directory locations. Anyone have any idea what I am missing? I have never seen anything like this before.
Thanks!
Click to expand...
Click to collapse
If you flash a mod from a flash made specially for Pixel, it should work. Other zips will not because the system files for the Pixel are in system/system, not just system.
Hello all. I found my Moto G ( XT1033) and decided to use it as a backup phone. Anyway, I flashed a CM12.1 ROM. Worked well for a while before switching off and getting stuck on a bootloop. Strange, I've already used it for some time. I thought maybe there were some problems with the ROM file. But now, I've tried it with Tesla, Blisspop, CM11, CM13. All have worked well for me in the past. Every ROM is facing the same problem.
Any help would be appreciated.
i face the same problem. its like everyday i have to do stock rom on my phone because it stuck on boatloader.
if all new clean flashed ROMs result in boot loops, you will have to reinstall stock ROM (with fastboot) to fix it. flashing stock ROM with custom recovery will not fix it though
koshikas said:
if all new clean flashed ROMs result in boot loops, you will have to reinstall stock ROM (with fastboot) to fix it. flashing stock ROM with custom recovery will not fix it though
Click to expand...
Click to collapse
Any idea what's causing it, though? I'm not able to flash a ROM into the device using the fastboot method. I've tried various builds, they all show the error after a few commands 'PARTITION SIZE IS SMALL' .
i'm not exactly sure whether you did it right. refer;
https://forum.xda-developers.com/showthread.php?t=2542219
https://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795