[Completed] [Q] Messy stuff with Samsung galaxy trend (GT-S7560) - XDA Assist

(Sorry for not perfect english)
Hello, soo recently i had a problem with my Galaxy Trend, it didn't react to charger, i tried cleaning the little tongue, trie to push it up a little bit (and all the regular stuff) when nothing helped i came with an conclusion that it's caused by something from software (rooted) so i uninstalled xposed framework, and did a factory reset, then the things gone wrong. Firstly everything was like it's supposed to be, the android with spinning guts, then galaxy trend logo, samsung logo in circle, and then flashing "SAMSUNG" brand name. just like always, but the process never went further, it just kept getting to the flashing SAMSUNG name and stopped there, the same story after several tryings. recovery/download mode (vol up/down+home+power) doesn't work (starts the same process as regular turning on) and then my batterie went empty (since i couldn't charge it) and now i only get to the galaxy trend logo and off (as usual for empty battery)
Any suggestions?
I'm trying to get help here for the 1st time, so if im not providing information which is needed to help me, then just ask about it, im gonna just sit here and wait

Hi,
I can't find anything relevant on XDA for your device and issue.
But with no power, There's nothing you can do at this point anyway. So that's the first thing you'll need to resolve.
Really all you can do is try another charger and cable. If that doesn't help it's your port on the device. You would need to have it repaired or replaced. It's unlikely the issue had anything to do with software. Because even powered off it should charge, so software has nothing to do with it.
Get it charging is step one. You can ask for other ideas here, or ask for help with the other issues once you're charged up here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------
Oh... Failed battery is another option, though the least likely option.

Thanks for helping.
So if i manage to charge my battery in some way, for example with wires, and there is the other problem with stucking on samsung logo, any ideas about that problem? :-S
And yes, it's the main problem with unpopular phones, noone bothers to do anything about them.

You probably need to install stock firmware again. With Odin I suspect. But as I said, I didn't find much on your device. Try sammobile site for firmware.
More issues with it, and you need to ask in the section I linked.
We're only here to help navigate the site, not support. ?
---------- Post added at 05:31 PM ---------- Previous post was at 05:29 PM ----------
Here's a thread on stock,
http://forum.xda-developers.com/showthread.php?t=2708775&page=2

Related

[Completed] [Q] Ainol Numy 3G AX10

I use an Ainol Numy 3G AX10. I put the phone in recovery mode and mistakenly activated the ADB sideload mode without connecting to a PC. Now i cannot exit the mode and reboot the phone. I connected the phone to a PC but it was not recognised. I need your help to reboot my phone. What else should I do.
Hi!
Before I search or post any links....try holding the power button constantly, and it may turn off. Then press and hold and it should turn on.
Or pull battery if its removable. If not, them don't try that.
---------- Post added at 09:46 AM ---------- Previous post was at 09:42 AM ----------
I didn't find anything of use on XDA for your device, so if what I suggested doesn't work....you can ask here....
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
Tho, contacting the manufacturers support may be the best thing to do. ?

[Completed] [Q] Cubot P9 bricked after firmware update - next step help needed

Our Cubot P9 has apparently bricked after a manufacturer firmware upgrade.
The firmware was downloaded from the official website, copied to a uSD card and then installed from via the Android System Recovery menu (accessed after cold boot by pressing volume-up & power buttons together).
Having followed Cubots instructions to the letter, we can only think that they have provided a link to the wrong image, despite it ostensibly being the correct one.
Current symptons are: phone still powers but not off again (requires battery removal). There is no ability to enter the fastboot or firmware recovery menus. The display lights-up but with a random/incoherent output.
All the threads, thus far, have included putting the device into fastboot or firmware recovery mode - which is not an option for us.
We'd like to know if this a recoverable situation? If so, what's the next step?
Hi,
If you can't enter recovery or fastboot mode, you won't be able to do much I'm afraid....but I suggest you ask in this discussion thread about your device....
http://forum.xda-developers.com/showthread.php?t=2612234
Good luck!
KJ said:
Hi,
If you can't enter recovery or fastboot mode, you won't be able to do much I'm afraid....but I suggest you ask in this discussion thread about your device....
http://forum.xda-developers.com/showthread.php?t=2612234
Good luck!
Click to expand...
Click to collapse
Thanks for the reply.
To put the question another way: in general, when the firmware in an Android
device goes awry, is there any way to recover the device using tools available on the user?
The way we see it is thus:-
In our case it's a Cubot P9 phone but it could just as easily be any other, or even a tablet.
Presumably during development and factory manufacture, there is a means to either load firmware in the first instance or reload it when desired. Short of hardware failure, we're sure that the original device developers have done exactly what we have done a dozen times on the bench.
Given the whole nature of the 'eco-system' is much less proprietary than it used to be (remember Nokia S40 anyone?) perhaps devices like ours are entirely lost to scrap heap?
Considering our device though: it still boots with the brand logo displayed, after which, while the display is completely distorted, the wallpaper and menus are visible. Even the volume & power buttons evoke a response. Atop this are its recognition as removable storage under Windows. Surely this indicates some potential for recovery?
Thanks again.
Perhaps, but if you can't flash anything to the device, you can't do anything. Please ask the folks in the thread I linked....or consult a service centre. ?
---------- Post added at 10:14 AM ---------- Previous post was at 10:13 AM ----------
If the thread I linked doesn't appeal to you, you can ask here....
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Thread closed. Thank you.

[Completed] Completly messed up LG G2 , very complicated case :X

Hello to everyone here is what happened.
I rooted my LG G2 and i started messing with the uninstal application, after an hour it happened that i uninstaled stuff that i need and when i tried to back it up i couldnt, i noticed that my gallery isnt working, i decided to make factory reset, after the reset i couldnt work with settings-->general-->everything there i try to open says "unfortunetly settings has stopped working"". Then after abit of research i decided that the only way to fix the phone is to flash stock firm, so far so good but i cant enter download mode, actually i cant enter recovery mode with buttons too. Phone is working though, you cant work with settings like turn on USB debugging but phone works otherwise. Then i decided to instal TWRP manager, via TWRP manager i was able to enter android recovery mode, in which u dont have ADVANCE---> TERMINAL COMMAND, so i decided to flash TWRP recovery, after flashing now i cant even open the android recovery mode, phone still boots and works!!! Sorry if i explained it bad, please help i am actually very desperate at this point :crying:
Hi,
Asking in your device section will get you the best results....
> LG G2 > G2 Q&A, Help & Troubleshooting
Good luck!
---------- Post added at 07:21 PM ---------- Previous post was at 07:19 PM ----------
Here is a guide for returning to stock, which would surely fix your device....
http://forum.xda-developers.com/showthread.php?t=2432476
Thread closed. Thank you.

[Completed] [Q] Alcatel POP UP c7 - Stuck SPLASH SCREEN

Hi, I recently did the root to my phone and everything OK, I changed the splash screen and it was fine although the splash screen not have changed. Yesterday tried to install MIUI rom with "flashify" as could not with zipped folders, deziped and the flashify read the boot.img the mobile phone restarted and gave the splash screen I installed a few days ago, was it for hours (as I have never installed a rom before thought were installing) I had enough after about 8 hours and restarted the mobile phone. Now the mobile phone connects and gets stuck on the splash screen. Already entered the recovery mode and restored the settings are used to manufacture, but keeps getting stuck at splash screen and I find no sulotion to this, if I try to install updates to the recovery-SDcard install the zip and the oporation is aborted... Someone can help me with this I would appreciate it
Sorry for my english
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck !
Now i'm realy **** of... i used SPFT (Smart Phone Flash Tool) and an error have ocurred (I dont remember what error) and now the phone don't turn on, I put them to charge and the LED turn on, but no image or ligth are transfer to the monitor :s what i do now ? I left the batery of the phone for 3hours and nothing. any solution ?
You'll need to ask in the section I linked. Personally, i have no idea, and can't find anything useful for you. You likely need to install the stock firmware again. Since I can't find it on XDA.... A google search, or contacting the manufacturer about firmware and flashing instructions is your best options.
---------- Post added at 03:54 PM ---------- Previous post was at 03:52 PM ----------
Also, I hope you aren't flashing things not made for your exact device... That could result in a bricked device. (destroyed)
Hopefully someone can help in the section I linked. ?

[Completed] Help installing a custom Recovery and Rom on Galaxy Tab 3 7.0 WiFi

So, I wanted to install a custom rom.
I picked TranchidaKat because, well, it was the first one I found?
Firstly to install a custom recovery. It should be noted that I bought this tablet from a classmate, and it was already rooted.
I followed instructions found here to install CWM recovery. TWRP doesn't appear to support Tab3 per their website.
I downloaded the files, and they appeared to write fine in Odin. However, when I attempt to boot into recovery (hold volume up and home, then hold power) the device boots to the Samsung Galaxy Tab logo screen, then simply sits there until I decide to turn it off.
Any suggestions? This whole process is rather overwhelming to me.
Hi,
Please ask for help in the CWM link you already posted. They will be the best ones to help you! ?
Good luck!
---------- Post added at 07:40 PM ---------- Previous post was at 07:39 PM ----------
Actually, I see you've already asked about this in multiple threads in your device section.
Xda Assist is here to help navigate the site, not for support.
Thank you for understanding, thread closed.

Categories

Resources