Related
I tried different tools but none worked so far.
superoneclick: hanged
Optimus G root: permission denied on reboot
This phone currently is a big seller and I am expecting somebody will give a solution. The source is also available at LG open source center.
Please help.
mingkee said:
I tried different tools but none worked so far.
superoneclick: hanged
Optimus G root: permission denied on reboot
This phone currently is a big seller and I am expecting somebody will give a solution. The source is also available at LG open source center.
Please help.
Click to expand...
Click to collapse
Lol I am also waiting for root for this phone
But mine is P760
Taftus said:
Lol I am also waiting for root for this phone
But mine is P760
Click to expand...
Click to collapse
Other than the screen size and HSPA band, the rest of spec are pretty the same, so it's possible P760 method is applied on P769.
Unfortunately, the method I searched online is simply a fraud (I looked up the web code).
Just picked up 2 of these phones. My wife loves hers. I am hoping to begin liking mine. Rooting would help.
also waiting for some development for this phone, i have done themes before and know the basics of android but would still need help from a real dev.
without root we can not move apk data to sd card !!! aaaa... im wating for root solution to
I've found an italian guide but i cannot post it cause i'm new and post external link is not allowed.. anyway look at:
androiworld.it -> forum -> lg-optimus-l9-335 -> root-lg-l9-75483
antoz87 said:
I've found an italian guide but i cannot post it cause i'm new and post external link is not allowed.. anyway look at:
androiworld.it -> forum -> lg-optimus-l9-335 -> root-lg-l9-75483
Click to expand...
Click to collapse
This one?
http://translate.google.com/transla....it/forum/lg-optimus-l9-335/root-lg-l9-75483/
Root procedure
Hi guys, I'm italian and I am one of the guys that rooted the phone with that procedure.
I'll try to help you out.
1) Download and install USB drivers and LG Suite
2) Make a full backup of your phone data with LG suite
3) Download bin4ry's script...you will find the link on the italian post you quoted
4) Plug the phone in, and make sure is set to "LG software mode" and it's in debug mode
5) Run the script, and make sure you DON'T run it as administrator, but run it as normal user, or it won't work (at least on Windows 8 64)
6) Select first "2" (Device type: Special), then 1 (root)
7) At some point, the phone will ask you to proceed with a recovery. Do it.
8) Follow the script's procedure until the end. Install super user app. Phone will reboot a few times...don't worry, it's normal You will also be asked to type something like "/data/etc"..do it!
9) Root should be effective by now. To check this out, try "Got root?" application
10) Restore your data with the backup you made at step 2.
Enjoy!
Let me know!
gianrond said:
Hi guys, I'm italian and I am one of the guys that rooted the phone with that procedure.
I'll try to help you out.
1) Download and install USB drivers and LG Suite
2) Make a full backup of your phone data with LG suite
3) Download bin4ry's script...you will find the link on the italian post you quoted
4) Plug the phone in, and make sure is set to "LG software mode" and it's in debug mode
5) Run the script, and make sure you DON'T run it as administrator, but run it as normal user, or it won't work (at least on Windows 8 64)
6) Select first "2" (Device type: Special), then 1 (root)
7) At some point, the phone will ask you to proceed with a recovery. Do it.
8) Follow the script's procedure until the end. Install super user app. Phone will reboot a few times...don't worry, it's normal You will also be asked to type something like "/data/etc"..do it!
9) Root should be effective by now. To check this out, try "Got root?" application
10) Restore your data with the backup you made at step 2.
Enjoy!
Let me know!
Click to expand...
Click to collapse
It doesn't work on me even I have to perform factory reset to fix.
mingkee said:
It doesn't work on me even I have to perform factory reset to fix.
Click to expand...
Click to collapse
What's the problem? What happened?
I can't even get PC Suite to detect my phone. The drivers are installed and seem to be working. Device manager shows everything OK. I select "LG Software" from the USB connection type menu on my device. The PC Suite software says "The device inforation failed to load" after attempting to connect.
gianrond said:
What's the problem? What happened?
Click to expand...
Click to collapse
Many applications were gone and I even can't use "restore" (2-2).
--------------------------------------------------------
(update)
Good News!!!
My P769 is rooted! The key is "Lookout Security". Disable it and you're ready.
Here is the steps:
Make sure LG driver installed (the simplest way: install LG suite)
You MUST disable Lookout Security (menu-settings-applications). Choose disable
Make sure USB debugging enabled, and choose USB charge only.
Run Root and Restore->RunMe.bat->choose 1. Check the phone screen if you're asked to restore, choose it when you're prompted.
The phone will reboot. You have to look at the status of the terminal. If there's NO permission denied error, look at the phone. If it shows "Android is updating", the phone should be rooted.
Don't forget to grab SuperSU and BusyBox (and install the latter).
mingkee said:
Many applications were gone and I even can't use "restore" (2-2).
--------------------------------------------------------
(update)
Good News!!!
My P769 is rooted! The key is "Lookout Security". Disable it and you're ready.
Here is the steps:
Make sure LG driver installed (the simplest way: install LG suite)
You MUST disable Lookout Security (menu-settings-applications). Choose disable
Make sure USB debugging enabled, and choose USB charge only.
Run Root and Restore->RunMe.bat->choose 1. Check the phone screen if you're asked to restore, choose it when you're prompted.
The phone will reboot. You have to look at the status of the terminal. If there's NO permission denied error, look at the phone. If it shows "Android is updating", the phone should be rooted.
Don't forget to grab SuperSU and BusyBox (and install the latter).
Click to expand...
Click to collapse
Heck yes!! I will try this with my other PC. I think this one is having driver conflicts because of all the devices I have rooted on it.
Do we need to do the backup and restore steps? Or is all data still intact?
kevev said:
Heck yes!! I will try this with my other PC. I think this one is having driver conflicts because of all the devices I have rooted on it.
Do we need to do the backup and restore steps? Or is all data still intact?
Click to expand...
Click to collapse
It doesn't really matter because the phone is still new and I have not yet put in data until it rooted.
Thread closed as per OP request. See this thread for detailed rooting information.
How To Root Kyocera Rise v4.0.4 and Kyocera Hydro v4.0.4
No PC Required
This is the procedure on how to root your Kyocera Rise v4.0.4. After many on-line searches, I was able to determine there was no concrete tutorial on how to root Kyocera Rise v4.0.4. In order to reduce frustration for others who may have experienced the same situation, I came up with this tutorial. I did not create any of the apps provided in this tutorial, I was just able to utilize the apps which where already on-line. Verified this tutorial also works for Kyocera Hydro v4.0.4.
****This tutorial may also work for other Kyocera phones****.
IMPORTANT: Any changes you make to your phone can potentially damage the phone, if done incorrectly. Under no circumstances am I responsible for any changes you make, which damage your phone. Please understand you are making these changes at YOUR OWN RISK!
Please follow the steps below exactly as described. I strongly recommend reading the entire tutorial before beginning to root your Kyocera Rise v4.0.4 Or Kyocera Hydro v4.0.4.
1. Plug your phone into the charger. Once that is completed, go to Settings → Developer Options and enable “Stay Awake” by putting a check in the box. This will prevent the phone from sleeping while you apply the changes.
2. Put your phone in Debug Mode by going to Setting → Developer Options and enabling “USB Debugging” by putting a check in the box.
3. Go to Setting → Security and enable “Unknown Sources” by putting a check in the box. This will allow the apps in this tutorial to work correctly.
4. Open Google Play, search for “ES File Explorer (1.5 Cupcake)” by ES App Group. {Link} Make sure your download the correct version specifically named “ES File Explorer (1.5 Cupcake)”.
5. Download the "Ministro II v9.4.apk" from {App located at the end of this Tutorial}. The correct version is very important.
6. Once you have downloaded "Ministro II v9.4 apk" to your phone it will be saved to your “Download” folder on your SDcard. Open “ES File Explorer (1.5 Cupcake)” and navigate to the “Download” folder on your SDcard. Click on the “Ministro II v9.4 apk” and install it. You may receive a notification telling you there are new Ministro II files in the repository. Do NOT update from the notification. Update will happen in the next few steps.
(Google Play - Ministro II versions 9.5+ do not work well with Poot.)
7. Download “Poot-debug(W100).apk” by GiantPune from {App located at the end of this Tutorial}. There are a few different versions of the Poot app. But they are not located in Google Play. It seems this version “Poot-debug(W100).apk” works well with the Kyocera. The correct version is very important.
8. Once you have downloaded “Poot-debug(W100).apk” to your phone it will be saved to your “Download” folder on your SDcard. Open “ES File Explorer (1.5 Cupcake)” and navigate to the “Download” folder on your SDcard. Click on the “Poot-debug(W100).apk” and install it.
9. Once it has completed installation, click “Open”. You will immediately get a Message from “Ministro II” stating “Poot needs extra libraries to run. Do you want to download them now?” Click “OK” to begin downloading the libraries. Please let “Ministro II” finish downloading the libraries before continuing. Note: The download speed of the libraries will depend on whether you are connected to Wifi or 3G. Please be patient and let “Ministro II” complete the download.
********************************************************
Import - If you receive an error stating "Invalid QT Version" while completing STEP # 8, Please delete Poot and Ministro 2 from your device.
Once those two files are deleted please download the files named "Ministro II-QtFix.apk" and "Poot-debug-QtFix.apk" from the end of this tutorial.
After downloading the two files named "Ministro II-QtFix.apk" and "Poot-debug-QtFix.apk", install them but do NOT open them.
Once the 2 files have been installed continue from STEP # 8.
*********************************************************
10. Once the download has been completed the Poot Application will appear with 2 options. Please click on “Press here to Poot”. Once you click the button, the white space on the “Poot” application should state the following:
[+] I think root, therefore I am root
Write SUBinary()
[+] remounted /system read-write
[+] wrote SUBinary
[+] changed SUBinary to vid 0, gid 0 mode 6755
[+] remounted /system read-only
[+] removed hook
[-] current && current != last+1: 0000ffff
0000ffff
[-] Haxx has run its course.
Reboot the device to play again
A demon materialized while pooting. Error code 64
You need to restart your device.
IMPORTANT: DO NOT REBOOT YOUR DEVICE UNTIL THIS TUTORIAL TELLS YOU SPECIFICALLY TO REBOOT YOUR DEVICE!!!
11. Before restarting your device continue with the tutorial. Open Google Play. Download “SuperUser” by ChainsDD from Google Play {Link}. Install “SuperUser” then click open when the installation has completed. Swipe to the left until you see the “Info” section. Look for the section labeled “SUBinary”. Under that section verify you have the “SU Binary version 3.03.2(15)”. Then disable the “outdated binary notification” by removing the check from the box.
***************************************************************************************************************************************************************
12. Open “ES File Explorer (1.5 Cupcake)” that you previously downloaded in this tutorial. Press the menu button on the Kyocera Rise to view the app's options and click on “setting”. Scroll down until you see the section called “Root Setting”. Enable the “Root Explorer” by putting a check in the box. “ES File Explorer (1.5 Cupcake)” will produce a message at this point, click “Yes”. The “SuperUser” app will appear asking you to grant “SuperUser” rights for “ES File Explorer (1.5 Cupcake)”. Click allow and make sure the “Always Remember” box is checked. It should be checked by default, but please verify.
13. Under the same section in “ES File Explorer (1.5 Cupcake)” named “Root Setting”, there is an option called “Mount File System”. Please enable “Mount File System” by placing a check in the box next to this option. You should get a message stating “System is mounted as writable”.
IMPORTANT Note: If you get an error while trying to complete steps 11 and 12, you did not complete the steps correctly in this tutorial. You must un-install all the apps and begin the process again.
***************************************************************************************************************************************************************
14. Download and install “Root Checker” by JOEYKRIM from Google Play {Link}. Once the installation has been completed click open. Inside the “Root Checker” app click on the button which states “Verify Root”. If all the steps were completed correctly, the following message will appear in green text “Congratulations! You have Root Access.”
15. Final Test of Root. Reboot your phone and wait until it completes rebooting. Open “Root Checker” app, click on the button which states “Verify Root”. If you see the message in green text “Congratulations! You have Root Access.”. You are done rooting!
A few suggestions after Rooting...
1. You will need to install “Busy Box” in order for some Root applications to work properly. “Busy Box” can be found by searching Google Play for the term “Busy Box”. There are a few different version created by different developers. Pick which ever one you prefer.
2. Before doing anything else to your device, download “Titanium Backup * Root” {Link}. Make sure you create a back up with this app, just in case anything goes wrong after Rooting.
3. There are no custom ROMs for the Kyocera Rise at this time. You can download “Rom Toolbox Lite” by JRummy {Link} to change some features on your phone. The “Pro” version is even better if you like the “Lite” features. I recommend starting with the “Boot Animations” since there are some really good Boot Animations in this tool.
Note: At this time you are unable to change the “Status Bar” color and icons. The ROM needs to needs to be de-oxeded before this can be completed.
4. Another good app that will make a significant improvement on your phone is “PimpMyRom” {Link}. I recommend activating the “Universal Init.d Support” under tools and Setting the “Wifi Scan Interval” higher under “Tweaks” Inside “Network & Internet”. The “Wifi” change will show a significant change in download speed.
IMPORTANT NOTE: Some of the features will cause the app to close. This means those features do not work on the Kyocera Rise. DO NOT INSTALL ANYTHING FROM THE “APPS & MODS” Section of “PimpMyROM”. THIS WILL DAMAGE YOUR PHONE. You can test the “APPS & MODS” features at YOUR OWN RISK!
5. You may also want to look for a new launcher to customize your device. You can try “Nova Launcher” or “ADW Launcher”. They each have many custom themes and can all be located in Google Play.
6.You may also want to download and install a “Terminal” App if you are interested in learning or applying commands. There are a few different terminal apps located in Google Play, just use the search term “Terminal”. Please select the one you prefer or test a few.
7. My next suggestion is, that you can install Playstation Mobile on the Kyocera Rise v4.0.4 by following the instruction in this {Link} from another XDA member. His instructions are accurate. Please follow the instructions on how to manually install PSM. The manual installation worked for me.
8. Xposed framework works on these devices. Xf has many features you can use which are similar to custom ROMs. I suggest doing a web search for "Xposed Framework". There are plenty of tutorials explaing how to use and install Xf.
9. Keep in mind these are only suggestions on what to do after your phone is rooted.
Enjoy your Rooted, Kyocera Rise v4.0.4 and/or Kyocera Hydro v4.0.4 !
If you find this tutorial helpful, please click on the “Thanks” button!
Verified Root Devices:
Kyocera Rise v4.0.4
Kyocera Hydro v4.0.4
Note: If you encounter any errors read the comments below. If you are still unsure on what to do, uninstall the apps, read the tutorial thoroughly, then start the process again. 100,000+ views and very little comments means the tutorial was successful. Good Luck in rooting, thanks for all the views and ALWAYS KEEP AN OPEN-MIND TO OPEN-SOURCE!
I try to Root_with_Restore_by_Bin4ry_v31. But It couldn't it root for me.
But I try to this way. It success to the root. :good:
Thank you.
I am glad you were able to root the Rise with ease!
Sent From Tweaked Kyocera
I am glad you were to root the device as well.
Sent From Tweaked Kyocera
Great Tutorial That Works...
Thank You to the Author of this Tutorial. This worked the very first time I did it. Even though i installed the wrong ES File Explorer Version, after installing the Correct one {ES File Explorer 1.5 Cupcate}, everything fell into place.
To others following the Tutorial, listen to the Author at the end of the Tutorial's section "A Few suggestions after Rooting..." Step 2 is key... Install the Titanium Backup and run the backup before adding more stuff after your device has Root Capability. That way you don't have to Redo the Tutorial again on your Device if something goes wrong in the future with installing Root required Apps.
Although when trying to use ROM Manager v5.5.2.8 (I downloaded this myself by the way), it's telling me i must have ClockworkMod Recovery Installed before I can Backup My current ROM. My Device is a Kycoera C5155. I'm sure they'll make one soon for my device. Or i'll find another ROM backup tool out on the App Store.
Thanks Again to the Author. Bravo :good::laugh:
I appreciate the positive feedback. Right now no one has figured out how to unlock the bootloader for the Rise. Therefore no CWM versions can be applied and/or tested.
Sooner or later someone will unlock it
Sent From Tweaked Kyocera
Problem with Ministro
Hello, thanks for the great tutorial but I am stuck at the Ministro libraries downloading, after the Poot open Ministro and it begins to download then gives an error "Invalid qt version" can you help me with that??
Thanks,
Can you please verify you are have downloaded Ministro 2 and NOT Ministro 1?
Please also verify you are connected to the internet via 3g or Wi-Fi. And you have a strong connection.
Sent From Tweaked Kyocera
TechDad378 said:
Can you please verify you are have downloaded Ministro 2 and NOT Ministro 1?
Please also verify you are connected to the internet via 3g or Wi-Fi. And you have a strong connection.
Sent From Tweaked Kyocera
Click to expand...
Click to collapse
Yes I am sure it is Ministro 2, also the connection is Wifi and it is working very fast. I also downloaded Ministro 2 Configuration Panel and set to testing repo. as mentioned in some other link when I searched for this error but still the same problem. I can see in logcat that Ministro 2 is going to the correct url (I can't post the url here bec I am still new) and then produce an error then crashes and go back to Poot which shows "Invalid Qt version".
I even tried Ministro 1 and it didn't work at all.
Thanks for your help.
OK, please follow these steps...
1. Uninstall Ministro 1, Ministro 2, and Ministro Config Panel.
2. Go To Setting - Developer Options - and verify "USB Debugging" and "Stay Awake" are checked.
3. Download ONLY "Ministro 2" from google play.
4. Once Ministro 2 has been installed plug your phone into the charger.
5. Run Poot again and it will download the correct libraries.
The problem can be cause by a few things... If your phone screen locks during the download it may also shut-off your wi-fi. This is why I had you check off "stay awake" and plug your phone into the charger. The config panel and version 1 of Ministro will cause problems which is why I had you remove them.
One other situation I noticed will cause the error you are encountering is the incorrect version of Poot. I am assuming you copied the version of Poot attached to the tutorial so I am ruling that error out.
Please let me know how you make out with the changes I suggested.
Sent From Tweaked Kyocera
TechDad378 said:
OK, please follow these steps...
1. Uninstall Ministro 1, Ministro 2, and Ministro Config Panel.
2. Go To Setting - Developer Options - and verify "USB Debugging" and "Stay Awake" are checked.
3. Download ONLY "Ministro 2" from google play.
4. Once Ministro 2 has been installed plug your phone into the charger.
5. Run Poot again and it will download the correct libraries.
The problem can be cause by a few things... If your phone screen locks during the download it may also shut-off your wi-fi. This is why I had you check off "stay awake" and plug your phone into the charger. The config panel and version 1 of Ministro will cause problems which is why I had you remove them.
One other situation I noticed will cause the error you are encountering is the incorrect version of Poot. I am assuming you copied the version of Poot attached to the tutorial so I am ruling that error out.
Please let me know how you make out with the changes I suggested.
Sent From Tweaked Kyocera
Click to expand...
Click to collapse
I tried exactly the same steps here but still the same problem. and I used the POOT attached in the tutorial.
What is the percentage of the libraries downloaded when you get the error?
Sent From Tweaked Kyocera
TechDad378 said:
What is the percentage of the libraries downloaded when you get the error?
Sent From Tweaked Kyocera
Click to expand...
Click to collapse
I don't see any progress bar. it shows "Downloading Libraries" then "Downloading SSL Certificates" then close and go back to Poot which shows "Invalid qt version"
I have been testing a few ideas to duplicate the problem you have experienced. I was able to duplicate the problem. It looks like Ministro 2 breaks the connection with poot.
I am in the process of determining if another app is the cause or if it is Ministro causing the problem.
Since other people have recently applied root with no problems, I am leaning towards another app being the cause of the problem.
I will run a few test to determine if another app is the cause. If another app is not the cause I will upload the correct version of ministro 2 to this tutorial.
Sent From Tweaked Kyocera
QT Error with Ministro
I was able to locate the problem with the QT Error. It seems Ministro has updated the QT version they use in their apk. They are using QTv5 when Poot is looking for QTv4.
I found a version of Poot that uses QTv5 but the Ministro 2 version in the app store does not work properly either.
After doing some research it seems the Poot version I located and the Ministro 2 apk from the developer's website work properly.
The Ministro 2 version from the developer's website actually searches for the correct libraries for this version of Poot.
I will adjust the tutorial to reference the QT Error.
You will need to download the files called "Ministro II-QtFix.apk" and "Poot-debug-QtFix.apk" attached to the tutorial, then continue the tutorial with those two files.
I tested the tutorial with these two files, everything is the same except for the fact you will be using 2 different files for Poot and Ministro.
TechDad378 said:
I was able to locate the problem with the QT Error. It seems Ministro has updated the QT version they use in their apk. They are using QTv5 when Poot is looking for QTv4.
I found a version of Poot that uses QTv5 but the Ministro 2 version in the app store does not work properly either.
After doing some research it seems the Poot version I located and the Ministro 2 apk from the developer's website work properly.
The Ministro 2 version from the developer's website actually searches for the correct libraries for this version of Poot.
I will adjust the tutorial to reference the QT Error.
You will need to download the files called "Ministro II-QtFix.apk" and "Poot-debug-QtFix.apk" attached to the tutorial, then continue the tutorial with those two files.
I tested the tutorial with these two files, everything is the same except for the fact you will be using 2 different files for Poot and Ministro.
Click to expand...
Click to collapse
Thanks a lot for your support. I managed to pass these steps now but I am stuck now on step 10. SuperUser shows that Su binary not found. ES Explorer (CupCake) gave an error when I tried to enable root explorer.
I have updated the tutorial and added additional files. Please restart the tutorial and let me know if the issue continues. If it does continue please, provide answer the questions...
1. Did you restart your device before adding superuser?
2. Can you please verify you downloaded the correct superuser app?
3. Can you provide me the exact error message and when it appears?
Sent From Tweaked Kyocera
31 July 2013 -- Successfully rooted Kyocera Hydro running 4.0.4...
Greetings,
A friend of mine asked me for help rooting his Kyocera Hydro, so I followed the steps that were posted in this thread, but something was amiss because root just wasn't happening. Here is what finally did the trick for me:
1) Uninstall whatever versions of Ministro and poot that you previously installed.
2) Download and install v9.4 of Ministro directly from your phone's browser (first make sure that Settings-->Developer options-->USB Debugging is checked, as well as Settings-->Developer options-->Stay Awake and Settings-->Security-->Unknown sources). You can find "Ministro II v9.4.apk" at the website files.kde.org slash necessitas slash installer slash release (sorry, I am too new to post links so I'm doing the best I can here). Be sure the file you get is dated 02-April-2013.
3) After you download and install Ministro II v9.4, install Poot-debug(W100).apk, which is referenced at the beginning of this thread.
4) Launch Poot and allow it to grab the necessary updates, etc., then click "Press here to Poot" and hopefully you will be successful as I was in rooting your phone!
Hope this helps.
Best,
--pqc
Good work! It seems from my testing the problem is cause by the new version of Ministro II. Currently v10 is on the app store. The new version uses QT 5 which doesn't seem to work well with Poot.
I will update the tutorial when I get a chance and upload Ministro II v9.4. That version seems to do the trick with regular rooting on Kyocera devices.
Sent From Tweaked Kyocera
pqcracker said:
Greetings,
A friend of mine asked me for help rooting his Kyocera Hydro, so I followed the steps that were posted in this thread, but something was amiss because root just wasn't happening. Here is what finally did the trick for me:
1) Uninstall whatever versions of Ministro and poot that you previously installed.
2) Download and install v9.4 of Ministro directly from your phone's browser (first make sure that Settings-->Developer options-->USB Debugging is checked, as well as Settings-->Developer options-->Stay Awake and Settings-->Security-->Unknown sources). You can find "Ministro II v9.4.apk" at the website files.kde.org slash necessitas slash installer slash release (sorry, I am too new to post links so I'm doing the best I can here). Be sure the file you get is dated 02-April-2013.
3) After you download and install Ministro II v9.4, install Poot-debug(W100).apk, which is referenced at the beginning of this thread.
4) Launch Poot and allow it to grab the necessary updates, etc., then click "Press here to Poot" and hopefully you will be successful as I was in rooting your phone!
Hope this helps.
Best,
--pqc
Click to expand...
Click to collapse
Thanks for the file location. The tutorial has been updated. Can you please verify what Android version you rooted on the Kyocera Hydro? I will add it to the tutorial as root verified.
Here the right place to ask help about usage for Framaroot.
Please don't ask for help about anything not related to Framaroot and read the FAQ first.
FAQ
Is framaroot work on my device ?
If your device is in the compatibility list above, the short answer is : yes but it depends of your firmware version, latest firmware have less chance to be rooted.
If your device is not in the compatibility list and it embed one of the processor mentionned above, the answer is : try it and see.
Why framaroot doesn't root anymore after I update my device ?
Because framaroot exploit security holes present in several devices which has been patched with update you have done, so exploits can't root your device anymore. Framaroot's exploits have a very short life to keep your device "less exposed" to others malicious application. Keep in mind that framaroot is not a permanent rooting application.
I loose root after update, what I can do to root my device now ?
An advice : if you want to have a chance to keep root after update, don't update with Kies or ODIN for samsung devices or don't flash system partition, prefer OTA update and use OTA survival feature in Superuser or SuperSU.
And if you have no choice, you can use the traditional method : flash tools specific to your device
Will framaroot include more exploits ?
Yes, but don't ask when since I don't know myself, it depend of the vendors fix response.
Framaroot crash when I select Gandalf exploit ?
Often the first time you launch Framaroot by selecting Gandalf as exploit, it crash Framaroot. Don't worry, in this case you have to re-launch Framaroot and select Gandalf again, the second time it should work.
What means error# on result ?
All errors less or equal to 9 mean your device is not vulnerable.
If you get error#10, give a try with Framaroot 1.5.3.
All other errors need some investigation about your kernel image.
Framaroot say Success but SuperSU is not installed after reboot ?
Maybe there is some additional protection on your device or something goes wrong with SuperSU version embedded in Framaroot.
In this case, I recommend to use "Execute script" action and put your own shell script commands in /sdcard/custom (use at your own risk, all commands are executed with root privileges). Look at this post to know how to use custom script.
What can I do when the result is Half-success ?
You see this message when the /system partition on your device is a read-only filesystem (eg: SquashFS). To handle this case Framaroot try to use a trick by adding "ro.kernel.qemu=1" in file /data/local.prop. To test if this trick work you have to reboot your device and connect to it with adb shell. Once connected type the "id" command to see if you are root.
If you are not root, your last chance is to select "Execute script" action and put your own shell script commands in /sdcard/custom (use at your own risk, all commands are executed with root privileges). Look at this post to know how to use custom script.
help error #6
Hi I have problem when I use framaroot in galaxy s 3 I-9300 jelly bean 4.3 I found 1 exploit aragorn I click on it but I found eroor #6 and their not more exploit please help me
i need help
i desperately want to root my hisense eg668 or Andromax i3
it has qualcomm msm8612 ,adreno 302 and it runs on android 4.3 "jls6c"
when i opened framaroot it only appears aragorn exploit and it failed.
try to run it from adb and manually chose gandalf but its not working to...
can you help me.
thanks
i605VRUAND3
Sch-i605
i605VRUAND3
will this(framaroot) work after this OTA update?
I tried not to do the OTA but it crashed my phone and installed it anyway!
((
limosisboy said:
Hi I have problem when I use framaroot in galaxy s 3 I-9300 jelly bean 4.3 I found 1 exploit aragorn I click on it but I found eroor #6 and their not more exploit please help me
Click to expand...
Click to collapse
All errors less or equal to 9 mean your device is not vulnerable. You have to use an other rooting method (CF-autoroot)
ksatriapetir said:
i need help
i desperately want to root my hisense eg668 or Andromax i3
it has qualcomm msm8612 ,adreno 302 and it runs on android 4.3 "jls6c"
when i opened framaroot it only appears aragorn exploit and it failed.
try to run it from adb and manually chose gandalf but its not working to...
can you help me.
thanks
Click to expand...
Click to collapse
The check for vulnerabilities is trivial and not accurate. Aragorn is often displayed but it only work on samsung devices. Choose another exploit with doesn't change anything, Framaroot display Gandalf if there is a chance to root your device, for your device it's a no go.
thebat1 said:
Sch-i605
i605VRUAND3
will this(framaroot) work after this OTA update?
I tried not to do the OTA but it crashed my phone and installed it anyway!
((
Click to expand...
Click to collapse
There is absolutely no warranty Framaroot will work after.
gandalf not working
My device Samsung galaxy win all timeframaroot is not show any message and re lunch isnot work
bakathefopl said:
My device Samsung galaxy win all timeframaroot is not show any message and re lunch isnot work
Click to expand...
Click to collapse
Read this thread for root: http://forum.xda-developers.com/showthread.php?t=2494471
framaroot
I have downloaded almost all the versions of framaroot but i am not getting all the three exploits option.........in all the versions there is only 1 exploit (aragon)......what can i do.......
plz help me
samsung proclaim only boots into recovery
Frama root rooted proclaim just fine but I gave it to a friend and he did a factory reset and wiped everything now it will only boot into recovery and I can't seem to find the files I need to restore it with Odin any idea how to fix this
Framaroot giving error #6 on galaxy s3 jb 4.3 ..plz help me
Sent from my GT-I9300T using XDA Premium 4 mobile app
Root Xperia L don't works
Root to Xperia L don't works!!!!!
ERROR #7
Android: 4.2.2
Version number: 15.3.A.1.14
Model: C2104
fix error 6
Please help me I dont have pc for root please fix error 6 if you fix error 6 in framroot 1.9.3 I well give you 10$ dollars in your PayPal account
GT-S6312
it says Success and installed superuser but when use root checker says no root found , or when to open Superuser it says need update , update gives failed on supersu ,Superuser ..... what can i do?
Error #7
Please help me, I've tried everything to fix this error but always appears the same: Error # 7 My cell is a Xperia E Dual.
I had already managed to root with my framaroot on a cell was the same, but he ended up falling and breaking and when I get to pack gave me another of the same and now I can not do root somehow.
I hope that answers. Thank you.
Gandalf exploit don't root
I have LG Optimus L3 (e430) and I used framaroot to root with success. Now I can't use Gandalf exploit. If I try to use it, it everytime send's me back to desktop. I'm sure that this is fault of updated ROM. Can you fix it?
Android version: 4.1.2
Kernel version: 3.4.0
Sorry for my English.
Please help
:crying:
I tried but root failed.
Attached screenshot of my phone specs.
My phone is Sony Xperia M Dual Android version - 4.3.
Please help.
Thanks
alephzain said:
Here the right place to ask help about usage for Framaroot.
Please don't ask for help about anything not related to Framaroot and read the FAQ first.
FAQ
Is framaroot work on my device ?
If your device is in the compatibility list above, the short answer is : yes but it depends of your firmware version, latest firmware have less chance to be rooted.
If your device is not in the compatibility list and it embed one of the processor mentionned above, the answer is : try it and see.
Why framaroot doesn't root anymore after I update my device ?
Because framaroot exploit security holes present in several devices which has been patched with update you have done, so exploits can't root your device anymore. Framaroot's exploits have a very short life to keep your device "less exposed" to others malicious application. Keep in mind that framaroot is not a permanent rooting application.
I loose root after update, what I can do to root my device now ?
An advice : if you want to have a chance to keep root after update, don't update with Kies or ODIN for samsung devices or don't flash system partition, prefer OTA update and use OTA survival feature in Superuser or SuperSU.
And if you have no choice, you can use the traditional method : flash tools specific to your device
Will framaroot include more exploits ?
Yes, but don't ask when since I don't know myself, it depend of the vendors fix response.
Framaroot crash when I select Gandalf exploit ?
Often the first time you launch Framaroot by selecting Gandalf as exploit, it crash Framaroot. Don't worry, in this case you have to re-launch Framaroot and select Gandalf again, the second time it should work.
What means error# on result ?
All errors less or equal to 9 mean your device is not vulnerable.
If you get error#10, give a try with Framaroot 1.5.3.
All other errors need some investigation about your kernel image.
Framaroot say Success but SuperSU is not installed after reboot ?
Maybe there is some additional protection on your device or something goes wrong with SuperSU version embedded in Framaroot.
In this case, I recommend to use "Execute script" action and put your own shell script commands in /sdcard/custom (use at your own risk, all commands are executed with root privileges). Look at this post to know how to use custom script.
What can I do when the result is Half-success ?
You see this message when the /system partition on your device is a read-only filesystem (eg: SquashFS). To handle this case Framaroot try to use a trick by adding "ro.kernel.qemu=1" in file /data/local.prop. To test if this trick work you have to reboot your device and connect to it with adb shell. Once connected type the "id" command to see if you are root.
If you are not root, your last chance is to select "Execute script" action and put your own shell script commands in /sdcard/custom (use at your own risk, all commands are executed with root privileges). Look at this post to know how to use custom script.
Click to expand...
Click to collapse
Framaroot not working
Framaroot giving error #6 and #5 when use aragon and gandalf exploit on my xperia SP
PLEASE HELP!!!!!!!!!!!!!!!!
framaroot malware detected on avast
hi, I had installed framaroot over two months ago and all was well but today I got a malware warning on avast, so I have uninstalled it. but I would really like the issue to be clarified so as to be able to use it again. my device is Lenovo IdeaPad A-3000 android version 4.2.2
hi again, well I took a look at this thread http://forum.xda-developers.com/showthread.php?t=1445166. and to be sure again checked the app permissions. seemed it only asked for camera permission so I guess avast's objection was to the possibility of rooting in general. would love to know if I'm correct in the conjecture.
Sent from my Lenovo A3000-H using XDA Free mobile app
Failed use another exploit if available
aftron afmid 7165 tablet android 4.2.2
Getting root on the stock 4.1.2 rom is very simple with towelroot.
Steps:
[1] Go to http://towelroot.com/ on your Relay and click the picture in the middle of the page, it will download an apk to your device.
[2] Install the apk you just download (you may have to allow unknown sources in settings)
[3] Click the make it rain button and wait 15 seconds. Your device will now reboot
[4] You are now rooted!
[5] Optional: Go to the Play Store or this thread and download the latest version of SuperSU.
[6] Optional: Launch the SuperSU app and follow the instructions there. If you do not have a custom recovery installed, do not choose that option for installation.
If you are still having trouble, follow this video. It is for the S5, but it is done exactly the same way!
https://www.youtube.com/watch?v=7Q5gZLkvuyE
I was brain-farting after a long day at work and I just couldn't get the Relay rooted using Odin. Switched ports, different cables, CWM, TWRP, side-load whatever .... towelroot got me rooted in two minutes. Would have been 1 minute but I didn't open it after downloading, so I had to do it again to "make it rain".
Of course, then I found out I was not entering download mode correctly using home key+vol down key+pwr key - guess I was so used to hold both vol up and vol down at same time on other phone. So .... didn't need it in the long run, but saved me some time and I donated to developer as well.
Thank you.
I have successfully obtain root and install Super SU using the instructions.
Paul
I realize that this is my first post, and that this is a bit of a necro, but I can verify that towelroot worked on my stock Relay SGH-T699, with Android 4.1.2
One thing I should mention is that viewing towelroot.com in Firefox on my phone resulted in just viewing a text file of the .apk instead of saving it as .apk. I had to download it on my PC and transfer it over. After that, it worked as advertised.
I would probably have more posts, but this actually solved my needs without me needing to ask anything.
Worked great for my Relay!
hi everyone,
In this post I've made a list of, most used, working root methods.
To unroot: use SuperSU and simply press "unroot"
This post will be updated!
You will also find all the updates about G6 development on our facebook group:
https://www.facebook.com/groups/328261053999820
____________________________________________
This post isn't longer up to date! Latest news, questions, and root tutorials:
https://www.facebook.com/groups/328261053999820/
____________________________________________
note:
there are a few versions of the Huawei Ascend G6 (G6-U10, G6-U00 etc.)
So I cant test these and other root methods on all the versions.
request our own XDA sub forum here:
http://forum.xda-developers.com/showthread.php?t=1660354
Working root methods, sorted descending, best one first:
RootGenius
Download
How to & bugs:
follow this guide to root
note: after rooting you can replace KingUser with your favourite superuser acces manager, recommend SuperSU
Working on the following models: G6-U00, G6-U10, G6-L11
Easy to use
You need a Windows pc to run RootGenius, or use a virtualbox in another OS
If RootGenius can't connect with your phone try to use an other version of RootGenius
Bugs:
Towelroot
Download
How to & bugs:
follow this guide to root
note: after rooting you need to install a superuser acces manager, I recommend SuperSU as first choice.
Working on the following models: G6-U00, G6-U10*, G6-L11
Easy to use
You don't need a pc to install towelroot
Bugs:
- On the G6-U10 you can't read&write your memory after you reboot. It seems to be a problem with the SU.
permanent fix:
Root your phone with towelroot and unstall SU and update you binary. Don't reboot!
Connect your rooted device with your PC and re-root it with RootGenius. RootGenius will sucessfully reroot your device and push
Kinguser to your device.
- If you remove Kinguser your memory r&w problem will popup!
easy temporary solution:
Root your phone with towelroot and install a SU, but don't reboot, if you reboot you will get the bug.
If you have the bug: unroot your phone with superSU, reboot, and use my temporary solution.
Vroot
Download
How to & bugs:
follow this guide to root
note: after rooting you can replace 授权管理 with your favourite superuser acces manager, I recommend SuperSU
Working on the following models: G6-U00, G6-L11
Easy to use
You need a Windows pc to run Vroot, or use a virtualbox in another OS
Bugs:
Kingo
Download
How to & bugs:
follow this guide to root
note: after rooting you can replace KingUser with your favourite superuser acces manager, I recommend SuperSU
Working on the following models: G6-U00, G6-L11
Easy to use
You need a Windows pc to run Kingo, or use a virtualbox in another OS
Bugs:
If you want to want to report a bug, or a working root method, please leave a comment, including your phone model!(G6-***)
special thanks to:
GeoHot
Chainfire
Mihir Patkar
zhuhang
xBeerdroiDx
Denny Luu
https://www.facebook.com/groups/328261053999820
https://www.facebook.com/HuaweiAscendG6
Thanks for starting this Huawei Ascend G6 thread.
My specs:
Model G6-U10 (3G version)
Build # (last few digits) C900B117
As far as rooting goes, yup, I had same SD card problem after rooting with Towel Root. So unrooted it. And then used Root Genius 1.9.6 which works perfectly. No SD card problems and can RW with Root Explorer no problem. I already disabled the hardware volume keys (edited the keypad .kl files) so I know the root is working as it should. And I have no problem navigating all around the storage(s) unlike after rooting with Towel. So I would say it is a complete full root. Have had no problems with rooted apps so far: AdAway, Root Explorer & Titanium Backup.
Only problem I am having with this phone is the auto-brightness feature. I thought my first G6 had a defective hardware light sensor which controls the auto brightness so I exchanged it out for another new one but the second new one also has this same problem. Basically the problem is that the screen will go full bright (over-sensitive light sensor) even with only very dim lamp light in a dark room. Thinking perhaps the problem lies with the firmware I have been trying out various autobrightness apps that use their own algorithms such Lux Auto Brightness and Brightness Manager. Both these apps will display the current lux (lx, brightness level) that the phone is currently experiencing. Normally it will be about 10lx in a dim room. But with the dim lamp on in a dim room and if the phone even catches even a tiny bit of the dim lamp face on, the lx will jump all the way up to 10,240(!) which is the same as being outside in full sunlight. So of course the stupid phone thinks it is outside and so the screen goes FULL BRIGHT even though you are in a dim room with only a little bit of lamp light. Very ****ty if you ask me.
Otherwise the phone is pretty sweet. I was looking at the P6 last year and it was just a tad too big (5" screen), 4.6" is as big as I want to go and as big a phone as I want to carry around. So the G6's 4.5" screen and thin design makes it quite nice. And the price is cheap(er), I got it for 9,000 pesos (around $200 U.S.) in the philippines. So far I can't complain about the 8mp rear or 5mp front cameras of the G6. But to get widescreen pics with the G6 you will have to set your camera app (I use Snap Camera) to 6mp rear and 4mp front. Otherwise you will get squarish pics if you use the highest 8/5mp settings.
Oh one thing I noticed is the stock app "Phone Manager" which runs all the time is quite devilish so I froze it with Titanium Backup. Basically it would stop all currently running apps when the phone was in sleep mode (screen off). Seems it's battery saving attempts are quite high and I couldn't find any settings to make it stop doing that. So I just froze the darn thing and now all my running apps (Gravity Screen etc) keep running even in sleep. The other features of Phone Manager I don't think are needed anyway.
I will update this thread if I run into any new problems or anything noteworthy of the G6. Cheers
andyxoxo said:
Thanks for starting this Huawei Ascend G6 thread.
My specs:
Model G6-U10 (3G version)
Build # (last few digits) C900B117
Click to expand...
Click to collapse
I will try rootgenius when my phone is back from repair at Huawei.
I will also test the auto brightness feature, but in normal use I'm not using it because it drains your battery.
Feel free to join our facebook group:
https://www.facebook.com/groups/328261053999820/
andyxoxo said:
Only problem I am having with this phone is the auto-brightness feature. I thought my first G6 had a defective hardware light sensor which controls the auto brightness so I exchanged it out for another new one but the second new one also has this same problem. Basically the problem is that the screen will go full bright (over-sensitive light sensor) even with only very dim lamp light in a dark room. Thinking perhaps the problem lies with the firmware I have been trying out various autobrightness apps that use their own algorithms such Lux Auto Brightness and Brightness Manager. Both these apps will display the current lux (lx, brightness level) that the phone is currently experiencing. Normally it will be about 10lx in a dim room. But with the dim lamp on in a dim room and if the phone even catches even a tiny bit of the dim lamp face on, the lx will jump all the way up to 10,240(!) which is the same as being outside in full sunlight. So of course the stupid phone thinks it is outside and so the screen goes FULL BRIGHT even though you are in a dim room with only a little bit of lamp light. Very ****ty if you ask me.
Click to expand...
Click to collapse
Okay, I guess I need to revise these statements. I had came to the Huawei after having a Sony Xperia M which had very smooth autobrightness. So while yes, the Huawei G6 may have a touch oversensitive auto-adjust brightness when compared to the Sony, it sure is heeps better than the other phones I have tried in the meantime since I wrote the above. So I am unsure as to whether to label it as a problem or not since it sure is better than other phones but not as good as the Sony. Perhaps I am just nitpicking.
But since the Huawei autobrightness does bother me I have since started using an app called "Brightness Slider" by a Korean developer. The free version works great with only unobtrusive occasional ads within the app itself. Can easily select the screen brightness, can easily select auto brightness on/off and even goes below 0. Have noticed no probs with it.
Now I am just waiting on a black hard case, shipped from China today through ebay
Before of rooted i dont connect to network
I use the app rootgenius and root after being not connect me to the network data. My cellphone is a Huawei Ascend G6-U251
Help me
Thanks
Please help me
I updated my phone with b136 g6-u10 and i lost notification panel and themes !!! PLease help me..
Unit: G6-L22
RootGenius: Root OK.!
Lost Data access over mobile network after rooting
recovered Data Access after unrooting
Hello,
i have used root Genius to root my G6-10U.
Everithing worked fine for a while. But now i cant install or update Apps.
I always getting the message that there is no more space, but there is enought.
I have 400 MB free on internal and 8 GB on SD.
I have used cache cleaner and the huawei tool for cleaning the phone, but still the same problem.
I have downgraded the play store, with no result.
Can someone give me a hint?
Query
Do all those rooting methods leave the bootloader Locked as it seems to have happened with my G6-U10 after rooting it with Kingo?
I first tried to unroot it with RootGenius with no success than I used Towellroot that blocked my internal memory and after having removed the root with SuperSu I finally rooted it successfully with Kingo.
Thanks
I thought I`d successfully rooted my G6-L11 with Kingo and installing SuperSu afterwards, but Titanium Backup did not worked propperly, even the pro versión, telling that there was not enough space for Apps backup. (wich was impossible though).
Finally I rooted again with "KingRoot" and everything works fine so far. I did not even remove the previous root. I uninstalled SuperSu manually and kept "KingUser" as super user App.
I hope this could be useful for someone.
Regards
I have a Huawei G6-U00. The only software that can root it properly is KingoRoot. However, I don't have access to internal storage after rooting without root access...
I unrooted until the problem is fixed.
To unroot the telephone and have it working again: root it and then unroot it with KingoRoot.
Tested only on models G6-U10 and G6-U00! Requires an unlocked bootloader!
Instructions:
1. Download and unpack the contents of the ADB in the root of drive C [Download]
2. Download the CWM [Download] or TWRP [Download]
3. Copy the downloaded file to the root folder ADB
4. Connect your phone to the computer in Fastboot (Bootloader).
5. When holding the Shift key, right click on the folder ADB and select the "Open Command Window"
6. At the command prompt, enter without the quotes "fastboot flash recovery cwm.img" (Where there is marked in blue, enter the name and extension of your file)
7. Press Enter and you're done. (Phone can be loaded into Recovery mode follows on the machine is off, hold down the VOL + and Inclusion)
Original recovery Huawei G6-U10 [Download]
Original recovery Huawei G6-U00 [Download]
I am sorry but I can not add links, I have 10 messages please write me an email^ [email protected]
---------- Post added at 10:49 AM ---------- Previous post was at 10:35 AM ----------
I have a custom firmware for models G6-U00, G6-C00.
Hi Shgut, how was you be able to unlock the bootloader on G6-U10? I'm not able to find how to do that.
mastrodicarte said:
Hi Shgut, how was you be able to unlock the bootloader on G6-U10? I'm not able to find how to do that.
Click to expand...
Click to collapse
Hi!
1 go to the link
http: //emui.huawei.com...p? id = unlock & mod = detail site in English
2 agree to the terms put a tick in press (next)
3 go further on the phone dials * # * # 2846579159 # * # *
see the box in which we can learn from his / n and imei
rewrite them somewhere else or store
exit the menu Utilities
4 on page data entry in the first column select (smart)
in the next window the model of your phone, if your model is not then, do the following manipulation
A) choose any model from the list
on the right mouse button click on the box model selection in the drop down box, choose (see code elements)
look for the line selected model
deploy it by clicking on the icon on the left of the lines and are looking for in the list of the model you have chosen before
further change in the line model name on its 2 locations to make it easier on
after you have changed the model in the model selection window should appear in your model
select it and begin to enter their data and serial bear it all clear on introducing id which consists of 8 digits
id can be found if you dial * # * # 1357946 # * # *
enter the verification code and get your unlock code which you will use when you unlock the bootloader on
Hopefully clearly explained and helped Anyway I got this way.
I am sorry I am from Russia and I do not know disguised as a google translator
If you have any questions please write to e-mail [email protected] Спасибо!
HUAWEI ASCEND G6-L11 - locked ROM
washichi said:
hi everyone,
In this post I've made a list of, most used, working root methods.
To unroot: use SuperSU and simply press "unroot"
This post will be updated!
You will also find all the updates about G6 development on our facebook group:
https://www.facebook.com/groups/328261053999820
____________________________________________
At this moment I am working on a diagram so you can see which G6 versions er are, which firmware, and if that version is:
rootable, unlockable, if there is custom recovery, downgradable. etc...
So please wait in patience!
____________________________________________
note:
there are a few versions of the Huawei Ascend G6 (G6-U10, G6-U00 etc.)
So I cant test these and other root methods on all the versions.
request our own XDA sub forum here:
http://forum.xda-developers.com/showthread.php?t=1660354
Working root methods, sorted descending, best one first:
RootGenius
Download
How to & bugs:
follow this guide to root
note: after rooting you can replace KingUser with your favourite superuser acces manager, recommend SuperSU
Working on the following models: G6-U00, G6-U10, G6-L11
Easy to use
You need a Windows pc to run RootGenius, or use a virtualbox in another OS
If RootGenius can't connect with your phone try to use an other version of RootGenius
Bugs:
Towelroot
Download
How to & bugs:
follow this guide to root
note: after rooting you need to install a superuser acces manager, I recommend SuperSU as first choice.
Working on the following models: G6-U00, G6-U10*, G6-L11
Easy to use
You don't need a pc to install towelroot
Bugs:
- On the G6-U10 you can't read&write your memory after you reboot. It seems to be a problem with the SU.
permanent fix:
Root your phone with towelroot and unstall SU and update you binary. Don't reboot!
Connect your rooted device with your PC and re-root it with RootGenius. RootGenius will sucessfully reroot your device and push
Kinguser to your device.
- If you remove Kinguser your memory r&w problem will popup!
easy temporary solution:
Root your phone with towelroot and install a SU, but don't reboot, if you reboot you will get the bug.
If you have the bug: unroot your phone with superSU, reboot, and use my temporary solution.
Vroot
Download
How to & bugs:
follow this guide to root
note: after rooting you can replace 授权管理 with your favourite superuser acces manager, I recommend SuperSU
Working on the following models: G6-U00, G6-L11
Easy to use
You need a Windows pc to run Vroot, or use a virtualbox in another OS
Bugs:
Kingo
Download
How to & bugs:
follow this guide to root
note: after rooting you can replace KingUser with your favourite superuser acces manager, I recommend SuperSU
Working on the following models: G6-U00, G6-L11
Easy to use
You need a Windows pc to run Kingo, or use a virtualbox in another OS
Bugs:
If you want to want to report a bug, or a working root method, please leave a comment, including your phone model!(G6-***)
special thanks to:
GeoHot
Chainfire
Mihir Patkar
zhuhang
xBeerdroiDx
Denny Luu
https://www.facebook.com/groups/328261053999820
https://www.facebook.com/HuaweiAscendG6
Click to expand...
Click to collapse
I have a Huawei that i roort with RootGenius_en, the program installed Kinguser and at the time of installation the Kinguser ask for update and I performed . But as I prefer the SuperSu downloaded from google play and I performed the steps that indicate one of the posts , i gave the the privileges to SuperSu but the same could not install the binary at all. As the KingUser is presented as virus in many sites i uninstalled but the system never was equal and had to look for a ROM to tackle .
I found this : h**p://huaweidevices.ru/r2534oe3m5k42im3124dsgj12343dsa356y332f1d2d/G6/Huawei_Ascend_G6-L11_V100R001C00B127_General.rar
But now I can not do root or install any other ROM .
I need help , please.
Any one be carfull with this ROM impossibel to root for now... Huawei_Ascend_G6-L11_V100R001C00B127_General
Thank U
Nice root option
problam rom bild number 194 g6-u00
plaese help problam
Hi my phone g6-u00 a ROM with 194 Byldnambr I installed the phone did not routed through any program that had tried it and got another phone ROM is installed when you install the ROM I'm faced with error
file:/sdcard/dload/update.app.size=1142117668oemsbl version list check error . . write data error
Error :sd card update failure.sd card update abort
How can I root my G6 on a Mac?
Root Ascend G6-U10 ...... B360
Hi to all.
I have a Huawei Ascend G6 with serial number that ends with B360. I have tried to make the root with all the methods.
None of them works.
How can I make the root with this version of telephone??
Thanks!
I can't download any app from playstore because that say alway insufficent space on phone, but i have download only 2 app!!
Please help me!
I just got a G6-U10 updatet to Android 4.4.2
I was seeking the whole day, how to get the phone get rooted.
I tried all the ways, showed here. Nothing worked.
Can someone help me?