After ordering every single bumper off EBAY, I found one that fits perfectly wroth the QI BACK ON! holy cow at long last. I have a lip so I can set it face down, and everything fits and works. And it's only 4$I
Awesome. Link maybe? ?
LINK!!!!!!......please
Sent from my Samsung Galaxy Note 4
seller # 164218
thesiliconvalley
That's the best I can do. I can't pay a link
Here's a link to the sellers store, with pre-search "Note 4".
There are a few different tpu cases for about $4 bucks there. Maybe this one is what the op got?
....I have that same tpu case and Samsung Qi back cover, if i'm not lazy i'll swap them both out (using stock back and ringke slim atm) and confirm that it works. On a side note, I'm generally not a fan of tpu cases, but that one in above link is nice, very 'grippy' and not much of a gooey/slippery/mushy feeling of most tpu cases i've tried in the past.
OK, I decided to do it. I can confirm that it does *not* fit, with tpu case I linked to. I did get mine from a different seller but it looks identical both inside and out. The case does stay on over the samsung qi back cover, it locks over the top and bottom edge but is slightly pulled back on the long sides causing the buttons to not match up very well.
big70tom said:
After ordering every single bumper off EBAY, I found one that fits perfectly wroth the QI BACK ON! holy cow at long last. I have a lip so I can set it face down, and everything fits and works. And it's only 4$I
Click to expand...
Click to collapse
You should just do the wireless charging mod. I have four cases that I use and they all work with Qi Wireless.
Wow... B u m p e r....
And dude, do you understand the word " bumper" you linked a case, B U M P E R
http://m.ebay.com/itm/121474337913?nav=SEARCH
There I linked it. See where it says TPU BUMPER case, yeah that's what that is. This one fits. The way it's made works with the QI back. The other 2 I bought from different sellers did not
The reason I don't do the mod some say is so easy..... Well some of us are not as tech savvy as others, and are not comfortable taking apart a back plate to remove the coil. It is also cheaper to spend 5$ and not ruin anything. Plus Samsung had to have a reason for making the back bigger. It would have been cheaper for them too to just use the existing back cover they already manufactured and just add the coil to it. I imagine there were concerns over the heat maybe. Anyway I would just rather not worry about damaging my phone. It has a lot of things on it for my job, and plus I like it. Lol
Can you post some pictures of the bumper on your phone?
you could do the qi charge pad insert. just stick it on and use any b u m p e r
Just got one today and can confirm, great fit. Thanks big70tom.
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
yogi217 said:
Can you post some pictures of the bumper on your phone?
Click to expand...
Click to collapse
Looks pretty much just as shown on the link.
So it looks like they don't have a 100% clear one. Bummer. Always something. Why did they have to add that ugly colored edging? I just want a 100% clear tpu bumper with hard TPU, not the rubbery kind.
Related
Ive been looking for a belt clip/holster for my G2 with the Otterbox Commuter since I got it. Id like to be able to clip my phone in to a belt clip that would hold it with the screen facing me and allow me to remove it with one hand. I saw this on ebay origionally then followed a link to their page.
http://www.slipgripcarmounts.com/SlipGrip-125-Bike-G2-HTC-Desire-Z-OtterBox-Commuter_p_94932.html
Its similar to what Im looking for but I need some sort of belt clip and Id like to have the screen facing my body to be protected. Anyone have any other ideas?
MNstan87 said:
Ive been looking for a belt clip/holster for my G2 with the Otterbox Commuter since I got it. Id like to be able to clip my phone in to a belt clip that would hold it with the screen facing me and allow me to remove it with one hand. I saw this on ebay origionally then followed a link to their page.
http://www.slipgripcarmounts.com/SlipGrip-125-Bike-G2-HTC-Desire-Z-OtterBox-Commuter_p_94932.html
Its similar to what Im looking for but I need some sort of belt clip and Id like to have the screen facing my body to be protected. Anyone have any other ideas?
Click to expand...
Click to collapse
well there are a few belt cases customed to desire z and even fewer that can hold a desire z with a thick case. this is just a solution if you cant find anything, i have found that a blackberry bold 9000 belt clip case fits very well on the desire z and there is a little extra room that you can use to fit your case in too
evilcuber said:
well there are a few belt cases customed to desire z and even fewer that can hold a desire z with a thick case. this is just a solution if you cant find anything, i have found that a blackberry bold 9000 belt clip case fits very well on the desire z and there is a little extra room that you can use to fit your case in too
Click to expand...
Click to collapse
Do you have link for the blackberry bold 9000 case you're referring to?
ultimase said:
Do you have link for the blackberry bold 9000 case you're referring to?
Click to expand...
Click to collapse
well i found a link to the picture of the case: http://img2.prosperent.com/images/2...9780-koskin-holster-pouch--hdw-18193-003-.jpg
you can probably buy this at walmart or bestbuy. just find the oem case for the blackberry bold 9000 or even the 9780. just test if your phone will fit in like mine
oh I thought it was a plastic holster like seidio. Thank you though.
I too am looking for a clip type holster u described above for my G2 with otterbox commuter. I have searched all over and cannot find anything. Anybody have any ideas would be greatly appreciated...
Two Leather Holsters for G2/DZ W/ Otterbox
i got two options for you guys
i have to split it in two post cause i can only upload 8 photos at once and also sorry for not linking but i dont have eight post yet so i cant post links
search B0045GYSFI on amazon
slips right in feels like leather magnet flap only thing i don't really like about it is the belt is a pain to get through the holster
Two Leather Holsters for G2/DZ W/ Otterbox
search B0047PGRUG on amazon
i perfer this one over the first one easier to clip on and i can take the clip off and use it like a pouch. fits nice and snug you can hold it upside down and it wont fall out. feels like leather
hopefully this helps you guys out because i was searching a couple months back couldn't find anything so decided just to try and estimate through pictures and it worked out. i never even post but thats cause i know how to use the search button
citizenerased said:
search B0047PGRUG on amazon
i perfer this one over the first one easier to clip on and i can take the clip off and use it like a pouch. fits nice and snug you can hold it upside down and it wont fall out. feels like leather
hopefully this helps you guys out because i was searching a couple months back couldn't find anything so decided just to try and estimate through pictures and it worked out. i never even post but thats cause i know how to use the search button
Click to expand...
Click to collapse
Arent you so special...
I'd recommend the Speck universal holdster. They are hard to find but are worth every penny because they fit any phone with a hard case.
Found this on Ebay says its a vertical case that will hold a G2 with Otterbox shell. I just ordered one and haven't received it yet. Will let you all know how it fits after I receive it... Plus they are 50% off original price now...
http://www.ebay.com/itm/Vertical-Le...401980?pt=PDA_Accessories&hash=item25661462bc
slufoot69 said:
Found this on Ebay says its a vertical case that will hold a G2 with Otterbox shell. I just ordered one and haven't received it yet. Will let you all know how it fits after I receive it... Plus they are 50% off original price now...
http://www.ebay.com/itm/Vertical-Le...401980?pt=PDA_Accessories&hash=item25661462bc
Click to expand...
Click to collapse
Hey slufoot, have you received the case yet? I'm looking for something similar and really looking forward to your review.
Sent from my HTC Vision using Tapatalk
G2 Otterbox Holster
The case is the perfect size for the G2 with otterbox. It fits in there nice and snug. The belt clip is not the kind that can comes off. It will spin 360 degrees. Its a very sturdy belt clip. It looks like imitation leather. The stitching seems to be pretty good also. Pretty nice all around holster for the G2 with otterbox... Only thing I see is the magnet for the flap is not as strong as I would like it to be. But it does the job, it will not open up if you shake it or turn it upside down. In my opinion it is definitely worth the few dollars.
---------- Post added at 04:09 PM ---------- Previous post was at 04:02 PM ----------
I was going to buy the speck universal holster but after watching the video it seems like it would be a hassle to get the phone out of the holster. By stretching the springs apart...
slufoot69 said:
The case is the perfect size for the G2 with otterbox. It fits in there nice and snug. The belt clip is not the kind that can comes off. It will spin 360 degrees. Its a very sturdy belt clip. It looks like imitation leather. The stitching seems to be pretty good also. Pretty nice all around holster for the G2 with otterbox... Only thing I see is the magnet for the flap is not as strong as I would like it to be. But it does the job, it will not open up if you shake it or turn it upside down. In my opinion it is definitely worth the few dollars.
---------- Post added at 04:09 PM ---------- Previous post was at 04:02 PM ----------
I was going to buy the speck universal holster but after watching the video it seems like it would be a hassle to get the phone out of the holster. By stretching the springs apart...
Click to expand...
Click to collapse
thanks! yeah, the speck holster does require a two handed removal and can be a pain. after a few uses though, it does loosen up enough to be quite easy... but still requires both hands. I've had mine for over a year now and am quite used to it. I had a large vertical pouch before it (much like yours) but it would get stuck sometimes. the shell case I have is the HTC oem one and seems to have more sticky rubber grip than the otterbox. well, enjoy your new case!
Sorry about another "case recommendation" thread, but my question is a little different.
I need a case that can be removed relatively quickly due to the phone not fitting in my car dock if there is a case attached. I really want the Otterbox Commuter case, but unfortunately it would be a hassle to have to remove it and put it on every time I want to use my car dock.
So, any good case recommendations for the Skyrocket which can be easily and quickly removed?
you have the seidio "surface combo" (case+holster). the bottom of the case can be removed as necessary.
http://www.seidioonline.com/samsung-skyrocket-surface-case-holster-black-p/bd2-hr3sssky-bk.htm
look at this post: you can see some pictures of the surface and the active cases.
http://forum.xda-developers.com/showpost.php?p=20556064&postcount=21
Kaaji1359 said:
Sorry about another "case recommendation" thread, but my question is a little different.
I need a case that can be removed relatively quickly due to the phone not fitting in my car dock if there is a case attached. I really want the Otterbox Commuter case, but unfortunately it would be a hassle to have to remove it and put it on every time I want to use my car dock.
So, any good case recommendations for the Skyrocket which can be easily and quickly removed?
Click to expand...
Click to collapse
I ordered a SEIDIO surface case/holster combo (AKA Best buy Platinum Series). Had one on my Captivate and it was a breeze to put on and take off.
I'm currently using a cheap tpu case I bought off ebay to use until the Seidio became available. It's really easy to install and remove also.
I bough this one...
http://www.amazon.com/Diztronic-Fle..._1_1?s=wireless&ie=UTF8&qid=1325082404&sr=1-1
I really like it. There's another one with glossy finish for $1 less.
http://www.amazon.com/Diztronic-Fle..._1_2?s=wireless&ie=UTF8&qid=1325082404&sr=1-2
yakapo said:
I bough this one...
http://www.amazon.com/Diztronic-Fle..._1_1?s=wireless&ie=UTF8&qid=1325082404&sr=1-1
I really like it. There's another one with glossy finish for $1 less.
http://www.amazon.com/Diztronic-Fle..._1_2?s=wireless&ie=UTF8&qid=1325082404&sr=1-2
Click to expand...
Click to collapse
That first one you linked to is the same one I got off ebay for the same price. I wonder if it's the same seller?
Decent case though. Easy on/off and slides in and out of pants pocket without dragging/sticking like some silicone cases do. Matte finish doesn't show fingerprints/smudges either.
Otterbox Commuter Series is the only way to go!
Otterboxes have just gotten too big IMO. When the phone quadruples in thickness, its too big.
Sent from my SAMSUNG-SGH-I727 using xda premium
http://www.ebay.com/itm/320806080557
Cheap, easy on and off, includes screen protector and actually looks nice. Cant go wrong
kwhit said:
Otterbox Commuter Series is the only way to go!
Click to expand...
Click to collapse
Yeah. I've used that series on my last three phones. My Otter for the SR came yesterday and I'm quite happy with it. It comes with a screen protector like my others did but that wasn't specified when I ordered it from their site. I bought an invisible shield when I bought the phone but haven't installed it yet. I can probably return that to Best Buy for the $20 or $30 it cost me. I have one on my 64G iTouch and I'm not sure it doesn't have a negative impact on the touch screen's responsiveness. Make sure you get the Commuter. They make three models for this phone. The Defender is kind of obtrusive. I generally only recommend them for extremely klutzy people (ex-girlfriend) who I KNOW will drop the thing at least once a day. The low end is just a gel slip over that's worthless.
One thing I like about the Commuter is, it makes it much easier to push the power button without accidentally turning the volume all the way down which has happened several times. Who thought putting the power button opposite the volume rocker was a good idea? There's a reason they are almost always on different axes.
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
occupational_hazard said:
Otterboxes have just gotten too big IMO. When the phone quadruples in thickness, its too big.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
The Defender adds some size. The Commuter adds very little despite having a thin gel inner lining under the hard outer case.
been pretty happy with my sprint case, modified with a dremel
also got these off of ebay and they are a perfect fit.
http://www.ebay.com/itm/25094405995...X:IT&_trksid=p3984.m1439.l2649#ht_3549wt_1346
Love the platinum series from best buy. got mine yesterday. Adds the least bulk of any case I've tried. Matte black, hard rubber feel.
For first time I found a tpu bumper on eBay today. Just like the one on my nexus 4. Also it comes from CA, AND IS 7$. Hoping it works with my qi back
Link?
No idea how to get a link on here. Go to eBay and type
Samsung Galaxy Note 4 Hard Crystal Clear Hybrid Soft TPU bumper
I'm curious to see it when it arrives
big70tom said:
No idea how to get a link on here. Go to eBay and type
Samsung Galaxy Note 4 Hard Crystal Clear Hybrid Soft TPU bumper
I'm curious to see it when it arrives
Click to expand...
Click to collapse
Pretty sure this has a plastic backing, like any other case, and not a "bumper" design like Nexus 4.
I don't see in the pics any evidence of a back. I'll know soon enough. I'll report back. In the pics it shows nothing like a back
Tpu bumper very good
I RECIEVED my TPU bumper I ordered off Ebay. Very good. Reminds me of my Nexus4 bumper. S really hoping it would work with the QI backplate, but it doesn't. ALMOST.... But no. The bottom of the phone with the Qi case is just a tad in the way, so it doesn't allow the bumper to extend enough to keep the screen off the surface face down. Man, it would no take much of a change to make this work, I whisk someone would catch on and do it. They would sell a bunch. 6$ and it's everything I'd expect a true bumper to be. I'm still using it, just gotta wait I guess to use my TYLT VU
http://m.ebay.com/itm/111799492041?varId=410789114876&_trksid=p2060353.m2749.l2648&_mwBanner=1
Would be nice to have. Not sure about the price though
Sent from my LG-H900 using Tapatalk
I read somewhere that it's just plastic.
Confirm the bumper is plastic, and just polished to look like metal bumper.
Who would think that's metal? It's freaking plastic
my favorite case hands down
I've had bumper cases for almost all my Android phones. But I've been going "naked" on the V10 as it appears to be designed to take somewhat more beating that most phones (I typically drop my phone like once a year). I did notice this LG OEM bumper case BUT it says it's for the F600 whereas I have the US H901. Does anyone know if there's an actual fit difference? Are any of the ports blocked? Thanks in advance.
Perfect Fit on H961N...=)....see my photo post...above
ConfuciusTse said:
I've had bumper cases for almost all my Android phones. But I've been going "naked" on the V10 as it appears to be designed to take somewhat more beating that most phones (I typically drop my phone like once a year). I did notice this LG OEM bumper case BUT it says it's for the F600 whereas I have the US H901. Does anyone know if there's an actual fit difference? Are any of the ports blocked? Thanks in advance.
Click to expand...
Click to collapse
Perfect Fit on H961N...=)....see my photo post...above...=)
ZiCott said:
Perfect Fit on H961N...=)....see my photo post...above...=)
Click to expand...
Click to collapse
OK, you convinced me. Ordered one from it's Korean homeland. Hopefully all the port cut-outs are in the same place!
Received the OEM bumper case. Fit is perfect, no worries about regional variants. Quality of plastics and coloring matches very well with the V10. Corners and sides are well protected.
However, the side rails of the bumper are just as slick as the steel rails of the V10, so there's no added grip. The front face is raised so the screen is protected but I have a Yootech hardened glass protector on top already. The worst thing is the back bumper is only raised at the bottom, so when flipped over the whole phone is resting on the bottom bumper and the camera lens! That's probably not much worse than originally but I expected better of an OEM bumper case. The port cut-outs are very accurate but the case seems "thicker" than other bumper cases I have used so you have to be more aware of how things plug in and possible microphone blockage.
Overall I would NOT recommend buying this bumper case, unfortunately there don't appear to be many alternatives.
texas83 said:
my favorite case hands down
Click to expand...
Click to collapse
Better than Obliq?
Used this bumper case since release and i haven't took it off once. Only thing is the bottom where the charger connects can be at times difficult.Hard to plug in other chargers. i ended up taking a gold piece off the bottom and it works perfect. The *plastic case* has taken all the damage but i rather damage the case then my actual phone. Works if you have a wireless charging battery cover/nfc. It doesn't look bad at all, and its not bulky. recommended
You don't want it if you have a second battery and swap batteries a lot. I've had 3 of them and all broke at one corner eventually. Longest one lasted was 2 months, others made it maybe a month. After the first broke I was very easy on the others but it didn't matter. The plastic eventually gets a stress crack and as soon as that appears it will be broke soon.
I notice they are a lot cheaper than when I bought them around when the phone came out. For $20 worth a shot, it was a cool case just garbage for what I paid. They were over $40 a piece.
jevers77 said:
You don't want it if you have a second battery and swap batteries a lot. I've had 3 of them and all broke at one corner eventually. Longest one lasted was 2 months, others made it maybe a month. After the first broke I was very easy on the others but it didn't matter. The plastic eventually gets a stress crack and as soon as that appears it will be broke soon.
I notice they are a lot cheaper than when I bought them around when the phone came out. For $20 worth a shot, it was a cool case just garbage for what I paid. They were over $40 a piece.
Click to expand...
Click to collapse
Yeah, I get the feeling this case isn't good for regular removal. My old bumper case for the Note 3 was all silicon/rubber material and came off very easily. This one has hard plastic parts that seem very fragile from the first use.
I had it. Snapped in a week. I'm not easy on my phone but was very dissapointing for the price
---------- Post added at 09:07 PM ---------- Previous post was at 09:07 PM ----------
Kylewolf said:
I had it. Snapped in a week. I'm not easy on my phone but was very dissapointing for the price
Click to expand...
Click to collapse
I should mention I use 3 batteries and swap them daily. This case would be fine if left on.
Kylewolf said:
I had it. Snapped in a week. I'm not easy on my phone but was very dissapointing for the price
---------- Post added at 09:07 PM ---------- Previous post was at 09:07 PM ----------
I should mention I use 3 batteries and swap them daily. This case would be fine if left on.
Click to expand...
Click to collapse
Which is very disappointing, i don't like cases but after the first fall of this phone leaving an ugly dent i got a generic bumper with clear plastic on the back - it's ugly and would rather spend the $20 or so on the OEM case... but i swap batteries occasionally too...
Has anyone found a tpu bumper or any other bumper besides the crap aluminum one?
Sent from my LG-H901 using XDA-Developers mobile app
And y'all want a Bumper Case for what? Impact falls? Ha good luck
WAIDroid said:
And y'all want a Bumper Case for what? Impact falls? Ha good luck
Click to expand...
Click to collapse
Yeah, hate cases but bumpers work good enough for me, thank you for the good luck wishes
Sent from my LG-H901 using XDA-Developers mobile app
Well the only way that you need a Bumper Case is for a heavy duty job or you just want one
WAIDroid said:
Well the only way that you need a Bumper Case is for a heavy duty job or you just want one
Click to expand...
Click to collapse
Not sure why a heavy duty job is the only reason I would need one... are construction workers and the like the only ones who drop there phones?
Sent from my LG-H901 using XDA-Developers mobile app
demkantor said:
Not sure why a heavy duty job is the only reason I would need one... are construction workers and the like the only ones who drop there phones?
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't even think there allowed to have their phones out while working so yeah IDK
I have a Extended Case for my G4 cause I have 3 Extended Batteries for my G4 and they all have that bumper like feature
I can't seem to find anyone with this case. No reviews or actually picture of the case besides the advertisement images on Amazon.
https://www.amazon.com/Galaxy-Spige...d=1472076672&sr=8-3&keywords=note+7+kickstand
I have the VRS one but I find the bumper too thick so it makes it harder to handle the phone. Feels like I'm on my note 4 again. Trying to see if the Spigen is the same. Also I can't tell if the Spigens kickstand is just taped on the back or if it's actually sitting in a cutout hole on the back of the case.
I ordered one of the spigen kickstand cases but I haven't received it yet, they've been backordered according to there site, mine shipped today, so I'll check how they attached them, and reply with those results when I get my case.
I just got mine today. I think it's pretty thin. As for the kickstand, it's definitely glued on to the hard back and not dropped into a cut out. The stand is fairly flat, about as thick as 1.5 quarters. I don't feel it when holding the phone because my hand is a little bit cupped. The top and bottom of the case is raised a little so the screen doesnt touch the surfacce when laid face down. So far I like the case. For 11.99 shipped, i think its a great deal.
Thank you. That's what i was afraid of. The VRS kick stand is in a cutout so the stand is very low profile. But the bumper is thick. Probably a good 3mm all the way around. That is why im looking at the spigen one.
Here are some pictures of how the case looks like when it's on the phone. I also put a quarter side by side with the kickstand to show the thickness of it and a picture of how it looks when the phone is lying on its back.
Thanks for the pictures! Here is the VRS one.
Sent from my SM-N910T using Tapatalk
These guys make the best cases in my opinion ( their wireless charger is great too) and I went with the one with the built in card holder is 50% off:
https://www.amazon.com/gp/product/B01AUR1HF4/ref=s9_acsd_al_bw_c_x_4
Got it last Friday and already dropped my phone 10 times with no damage .........
https://www.amazon.com/gp/product/B...bcb-5b0c-9b71-1298c43de85c&pf_rd_i=3081461011
Got this one and it works very well.
jimwick said:
These guys make the best cases in my opinion ( their wireless charger is great too) and I went with the one with the built in card holder is 50% off:
https://www.amazon.com/gp/product/B01AUR1HF4/ref=s9_acsd_al_bw_c_x_4
Got it last Friday and already dropped my phone 10 times with no damage .........
Click to expand...
Click to collapse
I'm actually looking for a slimmer profile. But thank you for the input though.
RMXO said:
https://www.amazon.com/gp/product/B...bcb-5b0c-9b71-1298c43de85c&pf_rd_i=3081461011
Got this one and it works very well.
Click to expand...
Click to collapse
Thanks but a bit pricey. I think for now I will stick with my VRS. Looks like it's the best option for case with kickstand. Thanks everyone for all your input!
https://www.amazon.com/gp/product/B01GIUIBFQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Kickstand-Sp...7_1?ie=UTF8&psc=1&refRID=DRWR767P4VTDCKD1N3ZF
I ended up getting the Ultra hybrid case without the kickstand and adding the kickstand myself. On amazon, you are able to add the kickstand for free if you purchase the spigen case. It made it nice since I had the option where to place the kickstand. The case was 9.99 when i bought it w/prime shipping. The raised bump from the kickstand doesn't cause any issues with me and is actually nice to have when holding the phone I have found.
How do you add it to a 3rd parry case. Does not stick on? Is it removable / moveable?
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
LRGDNA said:
https://www.amazon.com/gp/product/B01GIUIBFQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Kickstand-Sp...7_1?ie=UTF8&psc=1&refRID=DRWR767P4VTDCKD1N3ZF
I ended up getting the Ultra hybrid case without the kickstand and adding the kickstand myself. On amazon, you are able to add the kickstand for free if you purchase the spigen case. It made it nice since I had the option where to place the kickstand. The case was 9.99 when i bought it w/prime shipping. The raised bump from the kickstand doesn't cause any issues with me and is actually nice to have when holding the phone I have found.
Click to expand...
Click to collapse
How did you do that? I prefer to add it myself too so I can put it higher. Don't want it to interfere with my wireless charger.
Update :
So I just add both to cart and when checking out it gave me $9.99 discount. Cool. Thanks for the tip!
Sent from my SM-N930T using Tapatalk
aznmode said:
How did you do that? I prefer to add it myself too so I can put it higher. Don't want it to interfere with my wireless charger.
Update :
So I just add both to cart and when checking out it gave me $9.99 discount. Cool. Thanks for the tip!
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
No problem. Concerns about wireless charging and my car mount were the reasons I wanted to do it myself as well.
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
ekerbuddyeker said:
How do you add it to a 3rd parry case. Does not stick on? Is it removable / moveable?
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
Click to expand...
Click to collapse
You can at it to a third party case or even the phone directly if you buy it separately on amazon or directly from spigen. It is not movable once mounted though so make sure you know where you want it before sticking it on.
LRGDNA said:
No problem. Concerns about wireless charging and my car mount were the reasons I wanted to do it myself as well.
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
You can at it to a third party case or even the phone directly if you buy it separately on amazon or directly from spigen. It is not movable once mounted though so make sure you know where you want it before sticking it on.
Click to expand...
Click to collapse
I may mod the case and drill a hole for the kickstand so it will be more flushed. [emoji16]
Sent from my SM-N930T using Tapatalk
I got the Galaxy Note 7 Case, Spigen® [Crystal Hybrid] Metal Kickstand [Metal Slate] Clear TPU / PC Frame Slim Dual Layer Case for Samsung Galaxy Note 7 (2016) - 562CS20386
that actually has tje kickstand sitting in a cutout of the tpu back. I didnt want the metal scratching my n7 so I cut a little liner from the original back plastic and covered the kickstand on inside.
magisD said:
I got the Galaxy Note 7 Case, Spigen® [Crystal Hybrid] Metal Kickstand [Metal Slate] Clear TPU / PC Frame Slim Dual Layer Case for Samsung Galaxy Note 7 (2016) - 562CS20386
that actually has tje kickstand sitting in a cutout of the tpu back. I didnt want the metal scratching my n7 so I cut a little liner from the original back plastic and covered the kickstand on inside.
Click to expand...
Click to collapse
Pic? They must've redesigned it
Sent from my SM-N930T using Tapatalk
Sorry its on my phone with a wet apply screen protector and I'm not moving it, its not pushing up my case atm. But if you hit up spigens site or amazon.ca you can see it ... the kickstand is the thickest part.
I can't post links yet.
Also I must say the black case on silver looks awesome. The floating effect is nice plus I allready had black magnetic plates for my car mount and they match the case .
magisD said:
Sorry its on my phone with a wet apply screen protector and I'm not moving it, its not pushing up my case atm. But if you hit up spigens site or amazon.ca you can see it ... the kickstand is the thickest part.
I can't post links yet.
Also I must say the black case on silver looks awesome. The floating effect is nice plus I allready had black magnetic plates for my car mount and they match the case .
Click to expand...
Click to collapse
Haha I hear ya. No worries. I dread it everytime I take of my case to try new ones I've bought. I'm gonna need to use my 2nd pair of screen protector soon cause of this. But I will check spigen site instead. Thank you.
Sent from my SM-N930T using Tapatalk
LRGDNA said:
https://www.amazon.com/gp/product/B01GIUIBFQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Kickstand-Sp...7_1?ie=UTF8&psc=1&refRID=DRWR767P4VTDCKD1N3ZF
I ended up getting the Ultra hybrid case without the kickstand and adding the kickstand myself. On amazon, you are able to add the kickstand for free if you purchase the spigen case. It made it nice since I had the option where to place the kickstand. The case was 9.99 when i bought it w/prime shipping. The raised bump from the kickstand doesn't cause any issues with me and is actually nice to have when holding the phone I have found.
Click to expand...
Click to collapse
Got the spigen and separate kickstand but I did not like the spigen case as the sides tapered into a point at the center. See attached image. So this makes it a bit weird to hold since it isn't flat or rounded off.
So I ended up buying the ringke fusion. Much better case. And I have cut a hole in it for the spigen kickstand. Having the kickstand at the center is much better. I can tap on the top left or right corners and does not tip over. Unlike the VRS with the kickstand on the bottom. My mod is more flushed so it doesn't interfere with the fast wireless charger.
Here's a close up of the ringke. No sharp edge.
Here is my mod which I need to redo as my dremmel slipped and scratched the case.
Sent from my SM-N930T using Tapatalk