I installed incompatible drivers to a LePan II (tc979) android tablet. and it pretty much died instantly. i used to try many things with it knowing that i have the correct usb drivers : AnyDATA_USB_Driver and the official firmware :Release_LePanII_v406_Secured_Fused_fast boot.
But that error made the tablet really bricked, and it wont show any sign of life (wont power on) the only thing i have is "unknown device" in the Universal Serial Bus Controllers tab of device manager.
I tried several ways to update the drivers to the one that is made for the tablet and all i get is "the best driver software for your device is already installed - Unknown device"
even after uninstalling them and trying a few device drivers on my computer...
it just wont work and without being able to detect my tablet the firware cant restore life to it.
Can somebody help me?
Related
I've been trying to connect my Trasformer to my computer over USB for a while now so that I can use Nachoroot. When I plug it in, a bubble pops up on my PC on the bottom right saying "USB device not recognized". If i go into the device manager and click update driver and have it look in the folder with the USB drivers from Asus's website, it says that i already have the most up to date drivers. I've tried uninstalling the device, installing the package with Sync and web storage, but get the same result.
I have tried using a different cable, a different computer, and a different operating system (specifically windows 7, windows 8, and ubuntu). I've also restored my Transformer using the option in Settings.
Anybody have any ideas as to what will work?
Have you install Asus PC sync?
If you haven't you should
yes, i've installed sync.
Take a look at this thread, especially the "trouble shooting" portion
http://forum.xda-developers.com/showthread.php?p=13635629
I had looked at that thread before and have tried all of those steps, and tried them again, but no luck.
One note being that with the other drivers from the hotfile download on that thread, i'm unable to install them. In the device manager on my computer, when I plug the computer in it shows up as an unrecognized device, and when I try to use those drivers it says that they don't apply.
I am having the same problem. I was rooted on the 3.2.1 system with a US version BAO transformer TF101-A1 and the computer was able to use the drivers. However, I could not upgrade and was having issues unrooting, so I did a factory reset then upgraded OTA 3 different times until I got to the ICS 4.0.3 (which runs fine, just unrooted!). Now I cannot get the transformer drivers to install! I get the "USB Device Not Recognized" error and in the device manager it shows up as an Unknown Device under Universal Serial Bus Controllers. I try to update the drivers using Asus drivers, Vipormod drivers, and the drivers I used to originally root it which was Brks_rootkit_v7, but it won't accept them. This is without Asus Sync installed and trying on four different computers using Windows 7 64 bit and two different cables. I even tried loading the Asus Sync and it will not find the device. When I try to boot into stock recovery, I just get an Android that falls over with a red exclamation point. Also to note, my wife has a transformer still on 3.2.1 and rooted and it recognizes it immediately on all four computers using either cable. I have been everywhere searching for an answer (including this site) and tried just about everything. I just submitted a service claim email to Asus telling them that after the update I am unable to use Asus Sync and the drivers aren't recognized. I am extremely frustrated! Any help will be appreciated.
http://forum.xda-developers.com/showthread.php?t=1468832
and
http://forum.xda-developers.com/showthread.php?t=1476886
These also seem to be a similiar problem and as yet a solution has not been found.
Thank you for your quick reply. I will head over there.
Just to clarify, I can download the appropriate file, flash that file (using cwm) and then it will boot up in ICS or do I need to update to ICS after that?
Thanks,
USB Drivers are let your PC communicate with your device.
If you are executing some ADB Commands, you will need USB Drivers installed which will let the ADB server on your PC communicate with the ADB client on your device. If there are no USB Drivers installed on your PC, you will not be able to perform activities on your device via the PC.
First of All I would recommend you to install Universal ADB Driver Installer.The Universal ADB Driver installer detects your phone and installs the ADB drivers for it.This tool developed by drsmart is your solution to the “device not found” error you might get on executing ADB commands.
Universal ADB Driver Installer Download Link - http://adbdriver.com/downloads/
USB DRIVERS
1.SAMSUNG:
--- http://www.samsung.com/us/support/downloads
2.LG
---http://www.lg.com/us/support/mobile-support
3.HTC
---https://support.htc.com/en
4.SONY
---http://developer.sonymobile.com/downloads/drivers/
5.ASUS
---http://support.asus.com/download/options.aspx?SLanguage=en&type=1
6.MOTOROLA
---http://www.motorola.com/sites/motodev/us-en/motodev_lp.html
MORE DEVICES WILL BE UPDATED
Thanks for the info. I tried the univ adb driver installer but it showed I already had the right driver installed. Windows explorer can see my phone but other apps like HTC Sync or myphoneexplorer can't. This only happened after I rooted & installed a new rom. Maybe the rom is faulty...
I want Google nexus driver
any one can help me ?
mt6572 driver
Please add driver for mt6572 device
thx. very usefull!
thanks for the updated links.
Gole Maryam said:
I want Google nexus driver
any one can help me ?
Click to expand...
Click to collapse
an universal driver for all Nexus Devices (Phones and Tablets) can be found here:
http://forum.xda-developers.com/showthread.php?t=2513339
No access to USB debug
I give up and need some professional help...Ya both kinds.
Here we go, I have the Galaxy 3 d2att I747
Rooted
I was running CM 10.2 with latest nightly, I think 20131208 and decided to update to CM11 via my Cyanogenmod updater but before I did I had read somewhere I should change from CWM recovery to TWRP so I downloaded Goomanager and updated to the TWRP version for my phone then went for the KitKat update and thats when the trouble began.
I am now stuck in a boot loop even if I try to boot into TWRP all I get is the TWRP boot logo then straight into boot loop again. I am almost positive I did a factory wipe as well as cache/dalvik.
Not being able to use TWRP to get into recovery I thought I would just use Odin but I can't get any of my laptops to recognize the phones USB, I just get the windows usb driver error and have tried to install the drivers manually via device manager using my samsung 7 chronos with windows 8.1 and my acer with windows 7. I updated drivers using Samsung Kies and from the website, no luck.
I also ventured into an area that I have no expertise in but I guess thats how we learn so I downloaded the Android SDK thinking I could use it to download and install the google USB drivers that way, but I can't get out of boot loop to make sure USB debugging is checked. The only thing I can access is the stock download mode which would be great if I could use the USB connection.
What am I missing? Any suggestions?
USB Not Recognized Error
I noticed that my phone suddenly stopped being recognized on both my Windows 7 and Win8 laptops. I have been trying to fix it with the drivers but to no avail. However, I plugged my phone in with a different USB cord and voila it was recognized and working. Maybe this could possibly be a simple fix.
My computer stopped recognizing my Skyrocket
Hi Everyone,
I also am having trouble with my win 7 computer recognizing my Skyrocket suddenly. I have been using several KitKat roms and they have been working just fine, except for some reported bugs that the CM devs are working on. I even was able to connect to the computer and explore both my internal and external drives. Then suddenly that stopped and the computer gave me a need to get drivers warning. I've tried to download drivers from Samsung and the computer says they are already installed. I also tried the universal driver download and got the same message. Any help would be appreciated. Like the others on this forum, I wouldn't be able to odin if I got in trouble.
Thanks for your concideration,
drewfs7270
I switched to a different rom and now it's working again !
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Thanks.. :good: usefull
Also, any mobile manufacturer website has guides or direct downloads for drivers. Otherwise uni drivers suffice.....
Sent from my Nexus 5 using xda app-developers app
mtk preloader driver unable to install/unplugged appears
mt65xx unplugged when I try installing my device, I tried uninstalling all preloader vcom drivers in my laptop then restart and when I try to connect my device mtk mt65xx preloader just pops up in device manager then suddenly disappears and unknown device shows instead. I also tried manually update driver for unknown device then select the folder where my mtk driver is saved still unsuccessful? I've also searched and tried many other ways out there still no luck. Can anybody give me a solution? By the way i'm using windows 7 x64.
Delted
Edit: Deleted
soft brick
I face bad experienced, the tablet can not boot ( after install TWRP ) but enable to enter the fastboot mode and can be detected by the computer as android adb interface but adb can't communicated with the tablet. (list of devices atached)
I do have a backup file ( I make it before soft brick, I make backup using dd command, because I don't have cwm/twrp recovery ).... but how to flash it ? Tablet chipset is wonder media 8980 OS android 4.2.2
I can not flash it by adb/fastboot.
Maybe someone here can give me a little guide for how to....
I really appreciate for your kindness
Hey, I made an expirience, which might help other users as well.
I have a Sony device (Z1C) and use Windows 10, maybe this will help for other brands and for other Windows 10 users.
I installed drivers for my device and was able to use adb. When I put the phone into fastboot mode, it was not recognized anymore. I found out, Sony has a seperate (updated, maybe?) driver for fastboot mode. When I tried to install this, the driver was not signed and Windows refused to install it. However, you can enter the UEFI (successor of BIOS) and enable installation of unsigned drivers (at own risk). Then I was able to install the fastboot driver and controll my phone in fastboot mode as well as in adb mode.
In conclusion: You might think you installed drivers, because you did, but maybe you did not.
Even on LineageOS page, many people fail to mention that, you DON'T and SHOULDN'T install any generic or universal ADB driver if you have Samsung device. As you can just install Samsung USB Drivers officially from Samsung site. Samsung USB Drivers already contain ABD interface driver just fine so Universal ADB driver is redundant for Samsung phones.
When I plug in my p3113 into the computer while in download mode, it tries to install driver software, it does, then tells me the device was not successfully installed, I have Samsung USB drivers installed from kies, I've tried different usb ports to no avail.
I've been rooting phones since the G1, I've been through this process several times with several Samsung devices and have never had this problem, so is my computer just old or what?
I am running a fresh install of W7 Ultimate service pack 1. Don't come at me with searching either because I have and haven't found a solution.
Would like to get this done so my kids can continue downloading games, don't really wanna have to use someone elses computer but that is what it is gonna have to come down to unless someone here knows the answer to my problem.
Seems you know what you are doing. Only thing I can think of....did you turn USB debugging on? I believe it needs to be on for Odin.
Also do you have the proper drivers? If you install Kies and plug in your phone, your comp will download the needed drivers for your device, perhaps this may help
I have read and tryed everything possible but when i connect my P5210 galaxy tab3 10.1 to be recognized by my laptop, it keeps saying a usb device connected is not recognized, i have used the same laptop to root it before but now it just wont recognize it and gives a code 43, tried all suggestions i have found from googling, and nothing, it wont show up in odin either, shows up under usb controllers under device manager as unknown device, when i try to update the drivers it say windows has determine the the most recent drivers are installed, please help
No one can help me, please
Afternoon all,
Have been out of the rom'ing scene for a while...
I have a number of devices (Galaxy Tab 2 10.1 and Nexus 7 2012, to be exact), that I want to flash a new ROM onto (the Tab's stuck in a boot loop, the N7's due for Dirty Unicorns Nougat Rom).
All pretty straight forward - I've done it in the past - BUT...
Can I get Windows 10 to even *see* new hardware's been connected, let alone recognize it?
Can I fook
To confirm, I plug the USB between the PC and the device, and all that shows this is connected is that the device realises it's being charged, no "ding ding" from Windows, no USB confirmation from the device...
Both devices have USB Debugging enabled.
Have tried different USB cables
Have tried different USB ports
Have tried - many! - different USB drivers, including that from both Asus and Google's own dev kit.
Have ADB installed, "adb devices" shows no devices (blank).
The thing that's really pi**ing me off is that this is such a basic thing to be stuck by, I really cant figure out what I'm missing!
Any help appreciated gents...
cy80rg said:
Afternoon all,
Have been out of the rom'ing scene for a while...
I have a number of devices (Galaxy Tab 2 10.1 and Nexus 7 2012, to be exact), that I want to flash a new ROM onto (the Tab's stuck in a boot loop, the N7's due for Dirty Unicorns Nougat Rom).
All pretty straight forward - I've done it in the past - BUT...
Can I get Windows 10 to even *see* new hardware's been connected, let alone recognize it?
Can I fook
To confirm, I plug the USB between the PC and the device, and all that shows this is connected is that the device realises it's being charged, no "ding ding" from Windows, no USB confirmation from the device...
Both devices have USB Debugging enabled.
Have tried different USB cables
Have tried different USB ports
Have tried - many! - different USB drivers, including that from both Asus and Google's own dev kit.
Have ADB installed, "adb devices" shows no devices (blank).
The thing that's really pi**ing me off is that this is such a basic thing to be stuck by, I really cant figure out what I'm missing!
Any help appreciated gents...
Click to expand...
Click to collapse
Windows 10 is very buggy. Download lobit Drive Booster to see if you are missing any driver for your pc. Your pc is probably missing some drivers for the motherborad or outdated. If this does not work, clean install windows 10. Let windows 10 install all the drivers for you while it is installing. Best method. Good internet connection required.
its damn easy,the problem lies in Windows,just boot into repairmodus/system recovery its the blue menu for troubleshooting,there u choose Startup Setting and there u choose number 7,thats for disabling the digital driver signature checking,after the reboot all is fine,boot note u must do it everytime new after reboot.
please next ask and post in right section,thanx.
Nvidia USB driver (ADB and Fastboot) is the only one that works for me
https://developer.nvidia.com/shield-open-source