Related
Hello all, I have been lurking for about 3 months. I have usee the information found here to not only keep my gtab (it was so horrid when I got it almost took it back tbe same day. But keep it from hitlting the wall whenI get so pissedat it. The information i get here is easy to understand and easy follow.
But I seem to be at an impass. I want to install TnT lite from my microsd card but I seem to be doing something wrong
My intent is to wipe ALL the data on the device. But I dont want to do that till I know I can install TnT lite 4.2 fromthe micro sdcard.
When I boot to clockwork the only option I see is "install from sdcard" meaning the internal sd.
I have put the recovery folder in the root of the microsd. I have made sure that the command file says "sdcard2". I have removed from update zip from the sdcard (internal) and made sure the update zip file in also in the root of the micosd. But clockwork mod dose not see it.
I have searched the forum looking for more comprehensive idea onhow to do it from microsd but I have not seen anything. If I missed a step or looked in the wrong place let me know.
I can not start a tbread in the dev area so I hope I can find some help here.
The wall is starting to look like good place to slam this thing
Hi,
I think that when you use the update.zip and /recovery/command file method, that's with the STOCK recovery. CWM *replaces* the stock recovery, i.e., you either have stock recovery OR CWM, on your Gtab. That's why both get initiated by pressing the same key sequence, power pls Vol+.
So, if you want to flash using an update.zip and recovery/command (modified to pt to /sdcard2), you'll need to get stock recovery in your Gtab.
You can get stock recovery by flashing one of the newer stock TNT versions, e.g., 3452. That replaces CWM in the recovery partition, as part of the flash. Then put your desired update.zip and modified recovery/command on /sdcard2, power off, the power plus Vol+.
Jim
Thank you! That helps.
Hi,
I'm not sure if this helps or not, but you can mount USB in clockwork. So you could wipe all the data, partition and everything, then mount the USB, copy the rom over from your PC to the internal storage and flash it.
If you decide to use clockwork, make sure it's the .8 version that you can get from the first page of the tNt Lite thread.
nbowes said:
Hi,
I'm not sure if this helps or not, but you can mount USB in clockwork. So you could wipe all the data, partition and everything, then mount the USB, copy the rom over from your PC to the internal storage and flash it.
If you decide to use clockwork, make sure it's the .8 version that you can get from the first page of the tNt Lite thread.
Click to expand...
Click to collapse
That is great news. Thanks!
Hi folks,
I might have a stupid noob question, but not able to find the answer.
I got a Motorola Xoom (EU), and I did root it the other day.
All working fine.
Now I get update notifications for 3.1, but I'm not able to install the stock update.
After the reboot, the Android logo is showing an error, and then it reboots to normal OS.
Now the question is, all instructions I found so far require an external SD Card to get a custom rom with 3.1/3.2 installed.
Is a SD card required, or can I get the same done via USB debug?
Thanks for looking at this thread.
Regards,
derchris
derchrisuk said:
Hi folks,
I might have a stupid noob question, but not able to find the answer.
I got a Motorola Xoom (EU), and I did root it the other day.
All working fine.
Now I get update notifications for 3.1, but I'm not able to install the stock update.
After the reboot, the Android logo is showing an error, and then it reboots to normal OS.
Now the question is, all instructions I found so far require an external SD Card to get a custom rom with 3.1/3.2 installed.
Is a SD card required, or can I get the same done via USB debug?
Thanks for looking at this thread.
Regards,
derchris
Click to expand...
Click to collapse
You need a custom version of ClockworkMod Recovery made for the Xoom. You can flash the solarnz R4c v3.2.0.0 that does require a micro sdcard (even a 2GB is fine) which will appear at mnt/external1, or you can go with Rogue recovery that will let you flash from internal storage (mnt/sdcard) or other options. It's up to you but you must be able to flash the recovery image file through adb/fastboot, since you can't flash a zip file through fastboot.
Thanks for the reply,
I used this thread to install recovery-Tiamat-R4c-100611-1150-cwm.img, as they had a recovery image file for adb/fastboot.
Looking through the options, I see a "mount USB storage" option, but I ended up in only having a 3 MB drive, and as soon as I exited the menu the drive was gone too.
Do you happen to know a download for an adb/fastboot image of the Rogue Recovery?
I don't have a single SD Card, thats why I would like to use USB or internal memory.
derchrisuk said:
Thanks for the reply,
I used this thread to install recovery-Tiamat-R4c-100611-1150-cwm.img, as they had a recovery image file for adb/fastboot.
Looking through the options, I see a "mount USB storage" option, but I ended up in only having a 3 MB drive, and as soon as I exited the menu the drive was gone too.
Do you happen to know a download for an adb/fastboot image of the Rogue Recovery?
I don't have a single SD Card, thats why I would like to use USB or internal memory.
Click to expand...
Click to collapse
You would have to go to that thread and see if there is an option for initial install via img file. I haven't used Rogue, so I don't know.
I figured it out myself
There was an img file inside the zip, which I was able to flash to the Xoom.
Next I used Tiamat Xoom Rom 2.2.2 "Moray" from the internal memory, and have now 3.2.1 on my Xoom.
Thanks for the help
My pleasure.
So ive been at this for 2 days. I finally got the micro sd card with both files to install rom but in clockworkmod recovery i cant mount sd card nor format or anything. I can mount and unmount in the normal settings of the device and see it in root explorer but thats it. Its formatted to fat32. also on rom manager where it says to install from sdcard it only takes u to the internal sdcard which makes no sense because i was told u cant install a rom from the internal sdcard.
PS. This is my first Android Device!!!!
yeah
I am in the exact same situation. I am rooted on 4.0.3 and I wanted to install 4.0.4 or one of the custom ROM's. This is not my first android device but I am at a loss. I can not enter fastboot, can't load anything from the SD card in CWM recovery (get the message E:Can't mount /sdcard/), can not connect via ADB on my PC.
I feel that I have enough skill to do all of this because I have done it in the past. My ADB works fine with my Galaxy Nexus (just updated that and installed new kernel) so I don't know what is causing the problem. I have tried different SD cards(3) as well and nothing.
The biggest problem is I can not get into fastboot and SBF if I wanted to. I have been having issues with drivers even though I have installed motohelper like 6 million times.
I have tried factory resets and wipes and everything. I tried to do the factory update that is being pushed to me and I get an error. Any help would be greatly appreciated.
Sorry if this is stealing your thread but I think we are having the same problems.
check out my thread at xoomforums:
I PM'd it to u cus it dont let me put it here
Read all 3 pages. I think it will help u. posted same question there and a guy suggested to install the rogue cwm 1.5 recory via adb fastboot or whatever. he says that will read your sdcards. if i were u id try and fastboot on a different pc cus it looks like thats what we both have to do unfortunately. it looks like a pain!!! u have a xoom?
anyone figured out how to sort this?? really frustrating it just sayin E:can't mount sd card.. any help will be appreciated!!
platt said:
anyone figured out how to sort this?? really frustrating it just sayin E:can't mount sd card.. any help will be appreciated!!
Click to expand...
Click to collapse
If you are using CWM recovery from Rom Manager (not recommended for Xoom) it does only read your internal flash memory (called sdcard) but not your external microsd card (called external1???). So you need to flash a different custom recovery using adb/fastboot to flash a recovery.image file or, if you can flash through cwm (from internal sdcard) a recovery.zip file (either EOS or Rogue, depending on the ROM you will flash afterwards), Actually, any custom recovery is supposed to work for any rom, but in reality Eos works best for Eos and Rogue works best for the CM9 Kang.
Please, just remember, never flash a .zip file through fastboot, only an .image file!
+1 i agree with the above, fixed this last night. I download a couple recovery images, which were blank for some reason, so i downloaded the zips and extracted the recovery image folder. Then opened the command window from the folder with the recovery image and flashed it with fastboot. Now it works perfect.
Sent from my MB855 using xda premium
Fastboot
I had to use fastboot to flash an entire stock config when I got stuck in this loop.
TheAv8tor said:
I had to use fastboot to flash an entire stock config when I got stuck in this loop.
Click to expand...
Click to collapse
Atleast you got it out, mines been acting up since i flashed cm9. I think i might have to do that
Sent from my MB855 using xda premium
okantomi said:
If you are using CWM recovery from Rom Manager (not recommended for Xoom) it does only read your internal flash memory (called sdcard) but not your external microsd card (called external1???). So you need to flash a different custom recovery using adb/fastboot to flash a recovery.image file or, if you can flash through cwm (from internal sdcard) a recovery.zip file (either EOS or Rogue, depending on the ROM you will flash afterwards), Actually, any custom recovery is supposed to work for any rom, but in reality Eos works best for Eos and Rogue works best for the CM9 Kang.
Please, just remember, never flash a .zip file through fastboot, only an .image file!
Click to expand...
Click to collapse
Thanks for saving the last half of my hair which I hadn't pulled out yet.
Got the backup on SD ONLY after flashing the EOS recovery 1.5.0 (i tried the latest to begin with, did not work, made it worse flashing recovery from ROM Mgr)
http://www.xoomforums.com/forum/mot...ing-flashing-unrooting-under-one-roof-59.html has this particular recovery listed.
I still cannot boot in recovery using power+volUP...i have to get at least adb running. Any suggestion would be golden.
error mounting /internal_sdcard!
error mounting /internal_sdcard! pls help me it got stuck in boot loop tried to wipe cache and user data bt cwm says error mounting /internal_sdcard!
Ipse_Tase said:
Thanks for saving the last half of my hair which I hadn't pulled out yet.
Got the backup on SD ONLY after flashing the EOS recovery 1.5.0 (i tried the latest to begin with, did not work, made it worse flashing recovery from ROM Mgr)
http://www.xoomforums.com/forum/mot...ing-flashing-unrooting-under-one-roof-59.html has this particular recovery listed.
I still cannot boot in recovery using power+volUP...i have to get at least adb running. Any suggestion would be golden.
Click to expand...
Click to collapse
Delete any zip files or IMG files from sdcard and reboot it this helped me ............ Hit thanks if helped
Sent from my HTC Desire C using XDA Premium 4 mobile app
This is my first attempt at unlocking and rooting. So far I did manage to get unlocked. Now I am stuck at: Can't mount/sdcard . . . . .
I have been following the thread: [HOW] Rookie Rooting, Flashing And UnRooting Under One Roof
It seems to be layed out quite well and well, I'd never have gotten this far if it weren't for following those directions. I'm not discouraged because I know this is just a stumbling block. I can't wait to kill the bloatware and see if I can O/C this beast just a little.
Good luck to the folks who posted above me. I will post my results here.
Mike P.
I think the solution is much more simple...
The recovery uses normally e: an external sd card , you just trying by d: internal sd card , so take another sd card and dun let it be internal sd card...
And the recovery back on working with you
Hi!
I'm on SGS2 with Resurrection Remix v2.0 w/ Siyah v 3.2.6+ kernel.
My version of CWM is 4.0.1.5.
For some reason, I can't longer flash anything from CWM.
Whenever I reboot into CWM and choose the "choose zip from sdcard", I only get this error message: "E: Can't mount /sdcard". I don't have any external SD card on my phone, I have always used this method.
I've already tried to wipe cache without luck. If I choose "mount /sdcard", I only get "Error mounting /sdcard!" (This however, may be because it's referring to any external sdcard?)
I appreciate any answers!
RealSpZ said:
Hi!
I'm on SGS2 with Resurrection Remix v2.0 w/ Siyah v 3.2.6+ kernel.
My version of CWM is 4.0.1.5.
For some reason, I can't longer flash anything from CWM.
Whenever I reboot into CWM and choose the "choose zip from sdcard", I only get this error message: "E: Can't mount /sdcard". I don't have any external SD card on my phone, I have always used this method.
I've already tried to wipe cache without luck. If I choose "mount /sdcard", I only get "Error mounting /sdcard!" (This however, may be because it's referring to any external sdcard?)
I appreciate any answers!
Click to expand...
Click to collapse
So, when you put the .zip on your 'sdcard', are you putting it on the internal memory, or the external SD card?
And yep you're right - it's looking for an extsdcard to 'mount'.
juzz86 said:
So, when you put the .zip on your 'sdcard', are you putting it on the internal memory, or the external SD card?
And yep you're right - it's looking for an extsdcard to 'mount'.
Click to expand...
Click to collapse
I'm putting the .zip file in my /mnt/sdcard directory. Btw, when I can boot into the stock recovery, I have an option called "install zip from internal sd card". When I choose this option, I can access all my files and install the update that I want, but in CWM I can't!
RealSpZ said:
I'm putting the .zip file in my /mnt/sdcard directory. Btw, when I can boot into the stock recovery, I have an option called "install zip from internal sd card". When I choose this option, I can access all my files and install the update that I want, but in CWM I can't!
Click to expand...
Click to collapse
Have you tried sticking the .zip on an external SD, and seeing if it shows up that way just to confirm? I remember having a similar issue on the Infuse a while back now, and I had to start flashing off the internal memory.
I think a re-install of CWM fixed things up, but that was a high-Development time, and we were getting new versions every day
Try the external thing, I reckon that's the problem. Might require an update to CWM in order to restore functionality. Alternatively, you may like to look into a replacement such as 4EXT or TWRP.
I found this kernel by Chainfire, which adds root and SU, and also CWM. You can flash it through ODIN as normal, very detailed instructions in there.
I also found this article, which may shed some light on the issue for you?
I cannot believe how hard it is to find a Recovery in the GS2 section. What a nightmare!
juzz86 said:
Have you tried sticking the .zip on an external SD, and seeing if it shows up that way just to confirm? I remember having a similar issue on the Infuse a while back now, and I had to start flashing off the internal memory.
I think a re-install of CWM fixed things up, but that was a high-Development time, and we were getting new versions every day
Try the external thing, I reckon that's the problem. Might require an update to CWM in order to restore functionality. Alternatively, you may like to look into a replacement such as 4EXT or TWRP.
I found this kernel by Chainfire, which adds root and SU, and also CWM. You can flash it through ODIN as normal, very detailed instructions in there.
I also found this article, which may shed some light on the issue for you?
I cannot believe how hard it is to find a Recovery in the GS2 section. What a nightmare!
Click to expand...
Click to collapse
Hi juzz86!
Thank you for your response!
I do not have an external sd-card to try atm. I will look into the CWM alternatives if this does not work.
I found out that I had replaced my stock recovery with the CWM touch version, and this version allows me to use the "internal sd card" menu. This however, only works when shutting down my phone, and holding volume up+power+home. When using the fast option "reboot into recovery" from my phone, I still get the ordinary CWM - and I'm facing the same problem over again.
When trying to "mount /sdcard" in CWM, I get a standard "failed to mount" message
After looking into the Directory-bind app, I see that all my data is stored in my /sdcard folder, and nothing in the /sdcard/external_sd folder, so I followed the guide just for fun (since it doesn't really describe my problem), but it didn't work, and I still can't mount my /sdcard folder in CWM.
I'm going to see over the forums about the mount sdcard error in the forums, and try the kernel as suggested if nothing else works BB!
EDIT: I see that in newer versions of CWM, there should be an option for installing a zip from the internal sd card. My question is: Is it possible for me to update my version of CWM, while using the same kernel? I can't do this in ROM Manager.
Should be, yes. You'll probably need to use Fastboot or ODIN to flash it, so.e devices get zips but I'm unfamiliar with the GS2 Development.
Your best bet will be to find the CWM thread in one of the GS2 forums, and follow the instructions in there.
I wasn't aware that flashing a recovery through ROM Manager changed your kernel?
juzz86 said:
Should be, yes. You'll probably need to use Fastboot or ODIN to flash it, so.e devices get zips but I'm unfamiliar with the GS2 Development.
Your best bet will be to find the CWM thread in one of the GS2 forums, and follow the instructions in there.
I wasn't aware that flashing a recovery through ROM Manager changed your kernel?
Click to expand...
Click to collapse
It didn't. My answer was a bit messy, sorry. I understand that you can flash a new kernel through odin or CWM, and therefore get a new version of CWM bundled - like the customized versions (like the link you provided). I only want to update my version of CWM, but stay on the same kernel as before. What Rom Manager is able to do, is updating your version of CWM (the official ones).
If I'm mistaking, please let me know.
No, that's right you can update CWM by flashing a kernel, but you can also find a standalone recovery.img, sometimes a flashable zip, or you can use ROM Manager. All three of these methods won't touch your kernel
I got the oposite problem...
Hi all i am new .. but basicaly my issue is:
I'm trying to install a custom ROM on my rooted Galaxy SIII I19300.
I've placed the rom inside an external sdcard, entered Recovery mode (clockworkmod CMW-based Recovery) and clicked "install zip from sdcard" then "choose zip from sdcard", after that the console presented me with an error "E:Can't mount /sdcard/".
I've tried to select "mount /sdcard" in the mounts menu and it errors:
"Error mounting /sdcard!"
The sdcard works fine and I'm able to read/write from/to it without any issues in GSIII and in others cellphones..
The SDCARD got 2 gb and its formated in FAT32.
Any one help plz?
Format your sd card !
respected sir,
format your SD card , since cwm, twrp, and other recovery mods require mostly 'FAT32' format.
so, please take a bkp and format it to go ahead without probs!
Hello there,
I was in the middle of installing recovery, root and a custom ROM on my SM-T210 (Galaxy Tab 3 7"), when the title happened. I don't think the issue is device related though, so that's why I'm posting here.
I have StockRom Kitkat Version 1.7 (not the stock rom, that's just what it's called) installed at the moment, but I didn't like it so I wanted to go for Supernova (2.1) and flash that. This would've worked if TWRP didn't suddenly stop being able to see my files in internal storage...
My device isn't encrypted so that's not the issue. Does anyone have any idea what is going on?
Hello,
Make sure you are mounting system and data
Make sure zip files type is selected and not IMG files
Try moving to SD card and try to see if it's there if you have one
Reflash twrp -make sure it's the latest twrp-
Then boot into it, flash rom
-Hope- said:
Hello,
Make sure you are mounting system and data
Make sure zip files type is selected and not IMG files
Try moving to SD card and try to see if it's there if you have one
Reflash twrp -make sure it's the latest twrp-
Then boot into it, flash rom
Click to expand...
Click to collapse
Thank you very much sir, using an SD card did it for me! TWRP was already the newest one I could use so that wasn't an option, the other 2 tips I also already tried.