Database Info

[Q] UH-OH

Got a bit of a problem folks,, hope to get some help...
i have been running TNT lite since i got the tab and was up to 4.1 and started getting the acore force closes. so i followed some threads and installed clockwork and did the partition reformate and wipe data,,,,
now when i reboot, it gets the birds splash, and moves to the G-tablet boot image (i have the dancing droid one) and it hangs,,,,,,, nothing....
any ideal how i "fix this"...
thanks for any help because as you can see i am at a stop!
jake

I had some issues with my first tab similar to what you are having. The only way I solved it was by reflashing and wiping all date, which takes you back to the EULA. Good luck.

Do you have functional recovery? I'm guessing yes since you partitioned. Go to recovery and flash the rom again. You can mount the usb drivers in cwm to start usb mass storage so that you can download the rom on your computer and transfer to tablet. You can also put rom on external sd card and install from cwm.
When you partitioned the storage you deleted everything including the os. I believe it warned you of that before you did it.
If no recovery then you will have to nvflash. Search nvflash and bekit to get the nvflash info.
Matt

Make sure you are using bekits .8 CWM release. The latest release of CWM gave me fits, the only thing that would install was CM 7.

This isn't an Android Development topic, its a General topic, but don't worry about it, a mod will move it.
As to the question, like the others said. Use CWM .08, Wipe System, Wipe Cache, Install zip from SD Card, Install your choice of ROM (in your case, TnT Lite 4.1), Install gApps.zip, Reboot system now. That should get you up and running.
I am confused about you saying that you just now installed CWM but have been running TnT Lite. How would you have done that or do you mean you tried to update CWM or do you mean you have been using the stock TnT?
Also, feel free to hop on the #Tegratab IRC on Freenode if you need fast troubleshooting. Someone is usually on there to help

jasco13 said:
Do you have functional recovery? I'm guessing yes since you partitioned. Go to recovery and flash the rom again. You can mount the usb drivers in cwm to start usb mass storage so that you can download the rom on your computer and transfer to tablet. You can also put rom on external sd card and install from cwm.
When you partitioned the storage you deleted everything including the os. I believe it warned you of that before you did it.
If no recovery then you will have to nvflash. Search nvflash and bekit to get the nvflash info.
Matt
Click to expand...
Click to collapse
I "think" i tried this last night. I have 4.1.4 Update.zip and recovery folder on an USB stick. In CW, i went to "mount USB" (thinking i could access my USB and install from there) but ???? i didnt see anything and the only options were install update.zip from SD, and from Location but no USB option, and of course no way (that i saw) to brows to another location to "pick" where i wanted to install from.
Im thinking i am missing something with this step, or just plain old doing it wrong..

TheJesus said:
This isn't an Android Development topic, its a General topic, but don't worry about it, a mod will move it.
As to the question, like the others said. Use CWM .08, Wipe System, Wipe Cache, Install zip from SD Card, Install your choice of ROM (in your case, TnT Lite 4.1), Install gApps.zip, Reboot system now. That should get you up and running.
I am confused about you saying that you just now installed CWM but have been running TnT Lite. How would you have done that or do you mean you tried to update CWM or do you mean you have been using the stock TnT?
Also, feel free to hop on the #Tegratab IRC on Freenode if you need fast troubleshooting. Someone is usually on there to help
Click to expand...
Click to collapse
I have been installing the Roms, by downloading, taking the two "files" and moving them to my tab, and then rebooting with the power volume up,, ,finds the update and installs the ROM. its worked for all of them since 2.2...i thought i read that was an acceptable means of installing the ROM.????
as far as getting the files onto my SD (now). How? my computer doesnt see the tab because it is just hanging on dancing andy(unless there is anothe way of making it "see it", i cant seem to figure out how to get CW to read from my USB drive.....
Im just plain "stuck".
I am by no means a Android guru, and up to this point havnt had problems in the past... I TRULY am thankful for ANY help and all help i have recieved...
thanks folks
Jake

power off the tablet.
hold vol+ then power till u see recovery key pressed in the upper left corner of the screen. it will appear while the birds are still on the screen. If you get to the g tablet screen power off and repeat till u get into cw recovery.
Using volume +/- to navigate up and down Home to select and back to go back one level
Navigate cw recovery till u see mount usb storage i think its under partitions.
when you see usb mounted hook up the usb cable to the computer to the tablet mini usb port. copy the rom of your choice to the tablet. u only need the update.zip
once copied unmount usb storage.
back out till u see apply update.zip
Install and reboot u will be good to go.
of course flash gapps if u know what that is and want market on the tab.
Enjoy.

jakehale said:
i cant seem to figure out how to get CW to read from my USB drive.....
Click to expand...
Click to collapse
CW Won't read your USB drive. The "Mount USB" option in CW is to mount your tablet onto your computer as a USB storage device. By doing so, you can push files over to the tablet's internal storage from your computer.
BigJohn

BigJohn89 said:
CW Won't read your USB drive. The "Mount USB" option in CW is to mount your tablet onto your computer as a USB storage device. By doing so, you can push files over to the tablet's internal storage from your computer.
BigJohn
Click to expand...
Click to collapse
Agree. That is what I was talking about earlier, I just couldn't remember what it was labelled in CWM. Mount the USB to your PC and push over the file. Then in CWM choose install from sdcard (I think, too lazy to look). Navigate to the rom file and run it. All should be well after that.
Matt

I've had issues with the dancing droid boot animation (as have many others) where it won't get past the boot screen. I wouldn't recommend it for anyone.

japhule said:
I've had issues with the dancing droid boot animation (as have many others) where it won't get past the boot screen. I wouldn't recommend it for anyone.
Click to expand...
Click to collapse
How do i get the stock one back? im kinda tired of him also

[Q] Is there anything I can do???

I've been having problems with ICS and USB mass storage support, or lack of. Is there anything I can place on my micro SD. then copy it to the internal SD and boot from there?
Just grabbing at straws here!
Thansk
TF101 B50 by the way.

honkinn said:
I've been having problems with ICS and USB mass storage support, or lack of. Is there anything I can place on my micro SD. then copy it to the internal SD and boot from there?
Just grabbing at straws here!
Thansk
TF101 B50 by the way.
Click to expand...
Click to collapse
If you're still able to boot into the OS and is able to R/W files than yes, put the files on the micro sd, and using a file manager transfer it to internal sd.

Thanks for the help, but as a neebie, I need a suggestion on WHAT file to place on the internal SD that will I can boot from.
I still get the robot with the red triangle when I try to boot into recovery. I'm assuming that is because there wasn't a bootable file on the internal SD.
Does that make sense?

honkinn said:
Thanks for the help, but as a neebie, I need a suggestion on WHAT file to place on the internal SD that will I can boot from.
I still get the robot with the red triangle when I try to boot into recovery. I'm assuming that is because there wasn't a bootable file on the internal SD.
Does that make sense?
Click to expand...
Click to collapse
Oh I see you're on stock recovery, is the ROM stock also?
Only thing is download the latest firmware from Asus, extract the zip from within, renamed it EP101_SDUPDATE.zip and put it on the micro sd card. Boot into stock recovery and see if it will flash, maybe that will help get USB working again.

Thanks for the suggestion. I did what you told me and still nothing. When I try to boot into recovery, I still get the dead robot with the red triangle, then it boots stock.
IS there a particular folder on the SD or the Micro Sd I need to put the EP101_SDUPDATE.zip file into?
Is there a specific folder on the Intenal SD that the system boots from, that I could replace the update zip with a before ICS version?
Are these dumb questions?
Thanks in advance for taking the time to help me.

Forgot to mentioned, did you extract the zip from within the file you download?

I did extract the zip and placed it on the micro AND the internal SD in the Android folder.
IS there something else I should be doing?
This is driving me nuts.

Try it in the root of the sd card should automatically detect it there

Going on 2 weeks now
Is anyone else stuck in the situation I am? I cannot re-gain Mass Storage, SD support. When I try to boot into recovery, I get the Robot with the red triangle. The only way I can see my internal SD is through the stock file manager that is on the tablet. I don't know if I can move an appropriate file into a certain folder to get this thing to boot up to where I can reflash a ROM.
What is with this POS? I no longer have CWM and root after the OTA update. I e-mailes ASUS and they gave me the " pull the micro card, then do a wipe and re boot" Which did nothing but waste time. as you can probably tell, I am getting tired of dead ends on this Tf101 B50. does anyone have any idea what could have went wrong with the OTA update? Why did I loose the SD? and What can I do to fix/revert back to an earlier state.
self admitted noobie here...Feel free to kick the **** out of me!
Thanks for your help.

With a B50, see if you can get NVFlash working.
Download the NVFLash package
http://forum.xda-developers.com/showpost.php?p=23222380&postcount=414
Get an NVFLash compatible ROM here
http://forum.xda-developers.com/showthread.php?t=1524302&highlight=nvflash+rom

honkinn said:
Is anyone else stuck in the situation I am? I cannot re-gain Mass Storage, SD support. When I try to boot into recovery, I get the Robot with the red triangle. The only way I can see my internal SD is through the stock file manager that is on the tablet. I don't know if I can move an appropriate file into a certain folder to get this thing to boot up to where I can reflash a ROM.
What is with this POS? I no longer have CWM and root after the OTA update. I e-mailes ASUS and they gave me the " pull the micro card, then do a wipe and re boot" Which did nothing but waste time. as you can probably tell, I am getting tired of dead ends on this Tf101 B50. does anyone have any idea what could have went wrong with the OTA update? Why did I loose the SD? and What can I do to fix/revert back to an earlier state.
self admitted noobie here...Feel free to kick the **** out of me!
Thanks for your help.
Click to expand...
Click to collapse
Sounds like your OTA update was fudged so you need to reflash the ROM. I thought people with root and CWM can't do OTA updates?
Does adb or apx mode work? If apx mode works, then you can NVFlash so it shouldn't be a problem.
If ADB works, you can gain root with vipermod so you can install CWM.

I used to have root access. But, My last flash stuck in boot. Had to Nv flash it back to stock. Then the OTA hit, I had no more root or NVflash. So that is where I am. I hope there is something I can do to fix this.
Thanks for the help

OK lets try this method.
The firmware you download, don't rename it.
On the root of your sd card made a folder name ASUS
inside that make a folder name Update
extract the zip file from inside the download firmware and put it in the Update folder.
Just cold boot the TF and see if you get a notification of update avaiable on the status bar.
Outside of that not sure anything can be done except RMA

[Q] Cannot flash CM on 3100

Hi everyone,
I have a Galaxy Tab 2 7.0 (P3100) and I have rooted it and installed CWM so I could install the latest CM release. But when I try to install the CM zip file, it says "some symlinks failed". Now my tablet won't boot, the splash screen with "Samsung Galaxy Tab 2" keeps on forever. But I still have access to CWM and the Download mode so I think everything's not lost yet
Here are the exact steps I did:
- Uploaded the CM image (cm-10-20121213-NIGHTLY-p3100.zip), the gapps zip and the root zip to the tablet.
- Installed heimdall on my computer, with the correct drivers.
- Flashed CWM on the tablet.
- Installed the root zip on the tablet using CWM.
- Booted the tablet again just to make sure rooting was enabled (yes, it was).
- Opened CWM again, wiped data, wiped cache.
- Installed CM image:
--- Error: some symlinks failed (status 7)
- Installed the gapps zip file (worked)
- Formatted /system
- Installed CM image:
--- Same error: some symlinks failed (status 7)
I wanted to try another CM images, maybe that one is broken, I don't know, but now I cannot upload more files to the tabled internal SD card. I can't mount it anymore on my computer because the tablet won't boot. I tried using an external SD card (from another Android phone I have) but CWM says "Cannot mount /external_sd" when I try to mount it.
Can anyone help me? I want to flash the latest CM on my tablet.
Thanks!

This seems to me like either a broken recovery or maybe a corrupt download. What version of CM are you trying to flash? Also, what version of CWM are you using and where did you find it?
Posted from my Fascinate using XDA Premium

Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!

cristiandeives said:
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
Click to expand...
Click to collapse
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Which leaves you only two options, both include using a computer to get a ROM zip to the tab...
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.

LeftyGR said:
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Click to expand...
Click to collapse
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
LeftyGR said:
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
Click to expand...
Click to collapse
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
LeftyGR said:
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
Click to expand...
Click to collapse
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Thanks!

cristiandeives said:
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
Click to expand...
Click to collapse
Good man.
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
Click to expand...
Click to collapse
Pull the ext sd card out of the tab and put it into a card reader on a computer using the adapter the micro sd card [should have] come with.
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Click to expand...
Click to collapse
Possibly... However if you can mount your internal sd card, you should be able to place the zip on there. I don't usually suggest using internal, but if that's what you gotta do....

I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)

cristiandeives said:
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
Click to expand...
Click to collapse
Awsome. Thank you for providing your solution!!

TWRP Recovery 2.4.4.0.

I cleaned my tablet tf300, to install a newer and different rom, now i can't get twrp to see my microsd card to install the rom, how can i get the rom file to my internal sd card to proceed, as i can't get adb to work either, i've no idea how to copy the files to internal to get going again.
Any and all help will be appreciated. Thanks.

Luca Brasi09 said:
I cleaned my tablet tf300, to install a newer and different rom, now i can't get twrp to see my microsd card to install the rom, how can i get the rom file to my internal sd card to proceed, as i can't get adb to work either, i've no idea how to copy the files to internal to get going again.
Any and all help will be appreciated. Thanks.
Click to expand...
Click to collapse
Make sure the SD card is mounted in the "Mounts" section of TWRP.

I did that but it won't stay in that mode, keeps on reverting to internal.

Luca Brasi09 said:
I did that but it won't stay in that mode, keeps on reverting to internal.
Click to expand...
Click to collapse
Did you try unmounting the internal, then mounting external?

I have zero luck in getting it to stay on external SD, I've tried to unmount the internal and then mount the ext sd, so I am stuck. I don,t even see USB mode when I hold volume down and power, the only option is recovery Android and wipe data, so I don't seem to be able to get the zipped rom i want to install copied where I can use it.

Luca Brasi09 said:
I have zero luck in getting it to stay on external SD, I've tried to unmount the internal and then mount the ext sd, so I am stuck. I don,t even see USB mode when I hold volume down and power, the only option is recovery Android and wipe data, so I don't seem to be able to get the zipped rom i want to install copied where I can use it.
Click to expand...
Click to collapse
Thats how the new bootloader works, fastboot protocol is enabled the second you boot to that menu. So make sure you are on the patched 2.4.4.0 recovery.

I've downloaded a patched version of the twrp 2.4.4.0, but i can't access usb function to use fastboot or any other method to get the patched file to my internal storage on the tablet. Any ideas as how to transfer the needed file? Hope it's not bricked beyond repair. Plus my pc fails to install device driver, i am stuck at the starting screen that says "the device is unlocked" and asus logo.

[Q] Can't flash from SD Card

Good evening, XDA :cyclops:
I am having issues flashing from recovery!
Some device info: Motorola Xoom WiFi, fully stock and fully updated, unrooted, bootloader unlocked today, device wiped multiple times. This is my first day trying anything custom on this device.
I decided today that i wanted to go custom on my Xoom today and update it to KitKat via this method.
I have downloaded all the required files per the mentioned guide. While in recovery i go to apply update from USB drive, but it is not finding any of the downloaded files from the guide.
What I see is
Code:
Android system recovery <3e>
Choose a package to install:
/sdcard
../
The ../ is my only option to click and it obviously returns me to the main recovery menu.
All the zip files are on the root of the SD card, not in sub folders. I have confirmed via PC and another phone that the files are indeed there. I tried with a different, fresh, formatted (fat32) SD card, but I'm getting the same results.
The Xoom is indeed reading the SD card, confirmed via settings>storage.
I've tried using adb, but it's telling me the image isn't correct, but it's certainly possible I'm missing a step with adb.
Code:
C:\Xoom bootloader unlocker2>adb reboot bootloader
C:\Xoom bootloader unlocker2>fastboot flash R.A.H._TWRPv2.6.3_BigPart_selinux.zip
unknown partition 'R.A.H._TWRPv2.6.3_BigPart_selinux.zip'
error: cannot determine image filename for 'R.A.H._TWRPv2.6.3_BigPart_selinux.zip'
Yes, the zip is in that folder. I thought maybe I'd root first, so I tried that method with the root zip, but I'm getting the same error.
Is there something I can do to repartition this device and get it rommed, or am I doomed to use it stock?
Thank you for your time!

I found some information stating that I need to enable the SD card, but since I'm running up to date SW, and I can see the SD card from settings, I'm assuming that this isn't the case, correct?

I'm still stuck. Anyone around who could give me some advice?

scubab said:
I'm still stuck. Anyone around who could give me some advice?
Click to expand...
Click to collapse
It appears the XOOM does not like SD Cards that were formatted using Windows
(or perhaps Quick Formatted using Windows).
Using a 4GB FlashDrive formatted as Fat32 using Linux (i.e. Linux Mint 17.3 Cinnamon 64 bit boot CD)
resolved the issue.