Please help I'm in a jam.
I have a brand new Galaxy S5 G900P (Sprint).
I flashed my phone using odin, and it appeared to work. Once completed, the restarts and says "RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING. Set Warranty Bit: recovery".
Then it just freezes there. It will not actually go into recovery mode. Furthermore I cannot do a normal boot, so my only options are try to boot recovery mode, or download mode and reflash.
I tried reflashing, and still no luck.. Any advice?
Here are the tutorial i followed.
http://forum.xda-developers.com/showthread.php?t=2697523
Sir,
Please wait until mods will move this thread to the device specific forum.
For reply or more questions please register an account on XDA forums.
Stand by
Good luck
You might want to wipe Dalvik and Cache while in Recovery Mode. Perhaps that might help to boot normally.
Also please note, this recovery is not expressly designed your specific Variant of S5. You might want to instead review [RECOVERY] CWM S5 Sport SM-G860P
XDA Visitor said:
Please help I'm in a jam.
I have a brand new Galaxy S5 G900P (Sprint).
I flashed my phone using odin, and it appeared to work. Once completed, the restarts and says "RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING. Set Warranty Bit: recovery".
Then it just freezes there. It will not actually go into recovery mode. Furthermore I cannot do a normal boot, so my only options are try to boot recovery mode, or download mode and reflash.
I tried reflashing, and still no luck.. Any advice?
Here are the tutorial i followed.
http://forum.xda-developers.com/showthread.php?t=2697523
Click to expand...
Click to collapse
If you have the g900p your best bet for recovery is Philz.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/klte/
Use latest.
But if you have the Sport follow the link in the post above.
Sent from my SM-G900P
So it turns out the first two images that I tried were bad (at least for my specific device). I tried a third image, and it worked no problem.
If I knew exactly which posts I got them from I would mention them here, but I downloaded several and I don't want to mix anyone up but mis-referencing.
dc12078 said:
So it turns out the first two images that I tried were bad (at least for my specific device). I tried a third image, and it worked no problem.
If I knew exactly which posts I got them from I would mention them here, but I downloaded several and I don't want to mix anyone up but mis-referencing.
Click to expand...
Click to collapse
Were you trying to root your phone? If so, did you download the correct file for your phone's build?
Sent from my SM-G900P using Tapatalk
Terri M said:
Were you trying to root your phone? If so, did you download the correct file for your phone's build?
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Same thing happened to my phone, I had to reflash another Tar file. The Philz one worked for me.
Related
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app
agk.ganesh said:
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.
xu3sno said:
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app
Click to expand...
Click to collapse
androidck said:
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.
Click to expand...
Click to collapse
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..
agk.ganesh said:
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..
Click to expand...
Click to collapse
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2
ibub said:
Are you sure that you are booting into cwm v5.0.2.0?
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Click to expand...
Click to collapse
+1
CM10.1.6 worked
ibub said:
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
mns123 said:
+1
Click to expand...
Click to collapse
Thanks.
agk.ganesh said:
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
Thanks.
Click to expand...
Click to collapse
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2
Thanks
ibub said:
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I will try installing now new recovery and then new ROM.
Very glad to see the support from you guys... Thanks ibub and all..
[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:
Thanks
akiratoriyama said:
[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:
Click to expand...
Click to collapse
Thanks @akiratoriyama.
I have upgraded CWM recovery 6.xx through CWM 5.0.2.0 and successfully installed MukulSoni's Kitkat ROM.
And enjoying eating kitkat..
Thanks all..
So I flashed a rom on the s6, it ended up being the wrong model number, I went to recovery, factory reset, then the os system was deleted. I've been trying for 8 hours looking everywhere with no help.
I used odin with no success.
I can't boot into recovery because it boot loops on the cf auto root.
I have downloaded the stock rom, pit file, etc and anything won't work when I use Odin.
On smart switch, my device isn't supported.
Can any of you guys help me? I'm new here..
Never use auto root, always use twrp and install supersu through that
shotgun10ga said:
Never use auto root, always use twrp and install supersu through that
Click to expand...
Click to collapse
Is there a way to fix it?
No that is not a way to fix it. You have a galaxy s6 but what model number you get? G920F/I/....etc. You should find it in settings and about device. You didn't hard brick your phone you soft bricked your phone. Can you get into recovery/download mode?
bahmonkeys said:
Can you get into recovery/download mode?
Click to expand...
Click to collapse
He said he can't:
I can't boot into recovery because it boot loops on the cf auto root.
Click to expand...
Click to collapse
I'd try to flash the TWRP file thru Odin, for you don't need to boot into the recovery, you need download mode-
can you achieve that (vol down+home+power)?
If so, just flash TWRP, do a full swipe, install the right ROM and you're good.
Nice
Sent from my SM-G7102 using xda Forums PRO
You flahsed a rom, then delete it, then CF autoroot? WHAT?
Well, lesson learned the hard way. Read before you do something "dangerous".
Hallo. Try to get in to download mode.
Ignore the message your phone not supported.
Use kies 3 go to tab emergency.
Select firmware upgrade initialization .
Fill in your type number like SM-G920F and enter your serie number of the phone then it will download and restore your phone for you.. be patient cause it could take 30 mins easily . Good luck.
Verstuurd vanaf mijn SM-G920F met Tapatalk
What if the phone don't go in download mode??
Tried to root my Note 5 using Zedomax's method for 6.0.1 and I think something went wrong. My phone ran through the Odin flashing process and passed, but on reboot I was left with red letter saying "recovery is seandroid enforcing" or something to that effect along with a boot loop. I was unable to boot into TWRP. I can still get the phone in download mode, but it seems like every firmware/recovery I try to flash leaves me in the same predicament or it freezes odin before I can flash it. My note 5 is a 920p Sprint model and on 6.0.1. Any help is appreciated. Thanks.
timsmooth said:
Tried to root my Note 5 using Zedomax's method for 6.0.1 and I think something went wrong. My phone ran through the Odin flashing process and passed, but on reboot I was left with red letter saying "recovery is seandroid enforcing" or something to that effect along with a boot loop. I was unable to boot into TWRP. I can still get the phone in download mode, but it seems like every firmware/recovery I try to flash leaves me in the same predicament or it freezes odin before I can flash it. My note 5 is a 920p Sprint model and on 6.0.1. Any help is appreciated. Thanks.
Click to expand...
Click to collapse
Uncheck auto reboot in Odin and Odin twrp.
Reboot straight from download mode into twrp and flash either smoar rom or the deodexed rom by tdunham. Did you make sure you oem lock is off ?
Sent from my SM-N920P using Tapatalk
djxn40 said:
Uncheck auto reboot in Odin and Odin twrp.
Reboot straight from download mode into twrp and flash either smoar rom or the deodexed rom by tdunham. Did you make sure you oem lock is off ?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
I already helped him get back to stock so he's at least up and running.
timsmooth said:
Tried to root my Note 5 using Zedomax's method for 6.0.1 and I think something went wrong. My phone ran through the Odin flashing process and passed, but on reboot I was left with red letter saying "recovery is seandroid enforcing" or something to that effect along with a boot loop. I was unable to boot into TWRP. I can still get the phone in download mode, but it seems like every firmware/recovery I try to flash leaves me in the same predicament or it freezes odin before I can flash it. My note 5 is a 920p Sprint model and on 6.0.1. Any help is appreciated. Thanks.
Click to expand...
Click to collapse
Use the twrp 3.0.2.0 tar.tar found via @tdunham moar for mm threads note 5 recoveries link. I had same issue until using it.
This thread can be closed. Mrmike2182 helped me fix my issue in another thread.
Please help me!
MrMike2182 said:
I already helped him get back to stock so he's at least up and running.
Click to expand...
Click to collapse
I have the same exact problem with my phone. Same model and everything. I can make it to Odin mode but when I try and boot the phone I'm stuck on the boot screen with kernel is not seandroid enforcing in red.
N_MBU said:
I have the same exact problem with my phone. Same model and everything. I can make it to Odin mode but when I try and boot the phone I'm stuck on the boot screen with kernel is not seandroid enforcing in red.
Click to expand...
Click to collapse
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
This is what he told me that got my phone up and working again. Be warned it is the nuclear option. All of your data will be lost upon recovery good luck.
I hate bringing old posts back to life....But I'm stuck in a series of boot loops that I can't get out of.
I was rooted on MM, decided to go back to stock for a Gallery error I was having.
Downloaded the PD2 from Sammobile, Odin'd it, appears successful.
Reboot
I get to the stock ROM setup screens and the boot loop occurs. I can't complete setup.
I've tried unticking the reboot in Odin and going directly into system recovery...then I do a Factory reset which appears successful.\\Reboot phone, back into the stock ROM Welcome screen....start the setup, and usually after adding WiFi or during Activation reboot.
Any help??
hotspace said:
I hate bringing old posts back to life....But I'm stuck in a series of boot loops that I can't get out of.
I was rooted on MM, decided to go back to stock for a Gallery error I was having.
Downloaded the PD2 from Sammobile, Odin'd it, appears successful.
Reboot
I get to the stock ROM setup screens and the boot loop occurs. I can't complete setup.
I've tried unticking the reboot in Odin and going directly into system recovery...then I do a Factory reset which appears successful.\\Reboot phone, back into the stock ROM Welcome screen....start the setup, and usually after adding WiFi or during Activation reboot.
Any help??
Click to expand...
Click to collapse
It's extremely common and has one simple solution. Let the battery completely die and then charge it up a little and you won't loop anymore
Thanks for the reply. Earlier today I visited my local Sprint store and gave them a crack at it. After about 30 minutes in the store, the tech suggested I leave with it them and they were going to completely wipe it and load the stock image.
After about an hour I went back to the store and he gave me the bad news that he was unable to get it out of the boot loop as well. They've ordered me a new device.
I really trust what you say about letting the phone battery die...but I fear that would fix it and I'd be out a new replacement device.
954wrecker said:
It's extremely common and has one simple solution. Let the battery completely die and then charge it up a little and you won't loop anymore
Click to expand...
Click to collapse
Dude!! It worked. I put the phone in download mode and just let it sit until it died.
Booted it back up and it went straight into hands free activation. And no reboots.
Why does this work?
I'm trying to load TWRP or any custom recovery on my above mentioned tablet but i'm just not able to load it. nor even boots normally. Only ODIN mode.
when i try recovery boot, a screen saying 'TEAMWIN' will appear shortly but soon closes and 'Samsung Galaxy Note 10.1' bootscreen comes up. I can only access ODIN(Download) mode and even tried to flash different custom recovery files and it says Passed but still again getting the same TeamWin screen loading in recovery mode and crashes in the middle and then bootloop happens.
Not sure whats the problem.
PLS Help !
Wrong TWRP installed as a guess .
JJEgan said:
Wrong TWRP installed as a guess .
Click to expand...
Click to collapse
so, how can i solve this prob? pls help with detailed steps
Sorry you will have to read for yourself.
Sent from my SM-G935F using XDA-Developers mobile app
I was having issues at first.
Maybe give this a try and see if it works for you.
I had to install CWM via odin, and wait a good while for the "pass."
Then I had to make sure not to let it reboot on its own.
I powered off manually, and then booted into recovery like this:
1. Volume down and power on at the same time.
2. Immediate release power when you see anything pop up, but continue holding volume down.
3. Release vol down when you see the teamwin logo.
That got me passed the part where it would automatically bypass TWRP.
I then used the toolbox to do the rest including the "fix."
I had to manually boot into TWRP at first, even with the toolbox, but that was the issue I had, and how I got around it.
Philz Recovery works.
Sent from my SM-G935F using XDA-Developers mobile app
bladebarrier said:
I was having issues at first.
Maybe give this a try and see if it works for you.
I had to install CWM via odin, and wait a good while for the "pass."
Then I had to make sure not to let it reboot on its own.
I powered off manually, and then booted into recovery like this:
1. Volume down and power on at the same time.
2. Immediate release power when you see anything pop up, but continue holding volume down.
3. Release vol down when you see the teamwin logo.
That got me passed the part where it would automatically bypass TWRP.
I then used the toolbox to do the rest including the "fix."
I had to manually boot into TWRP at first, even with the toolbox, but that was the issue I had, and how I got around it.
Click to expand...
Click to collapse
thanx, but not working for me here.
i tried installing cwm thru odin n it passed.
but again getting the same old teamwin screen when trying for recovery mode.
even normal mode leads to boot struck with cyanogen logo
JJEgan said:
Philz Recovery works.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
not working either
JJEgan said:
Wrong TWRP installed as a guess .
Click to expand...
Click to collapse
same problem no one can reply
REPLY
Its all answered .
JJEgan said:
REPLY
Its all answered .
Click to expand...
Click to collapse
Probably, but that doesn't mean the issue was ever solved.
I'm having the EXACT same issue as OP... All of a sudden I got bootloop when starting the tablet normally, going to recovery only shows TeamWin logo briefly and tablet reboots, and download mode works (Odin detects the tablet) but it always says "DOWNLOADING... Do not turn off target.".
Already tried installing stock rom, Philz recovery, CWM Recovery, EFS Repair... Nothing worked.
marianito10 said:
Probably, but that doesn't mean the issue was ever solved.
I'm having the EXACT same issue as OP... All of a sudden I got bootloop when starting the tablet normally, going to recovery only shows TeamWin logo briefly and tablet reboots, and download mode works (Odin detects the tablet) but it always says "DOWNLOADING... Do not turn off target.".
Already tried installing stock rom, Philz recovery, CWM Recovery, EFS Repair... Nothing worked.
Click to expand...
Click to collapse
If the TWRP screen is still there after you've flashed for example the stock ROM, than it's clear that your eMMC is locked.
In this case it need's to get replaced, I'm doing this weekly, so this problem is to solve.
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Htxenuj said:
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Click to expand...
Click to collapse
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
Hmm. Can you show me a guide sir? On reinstalling? 'cos I dont know what to do since I am stuck on a blank screen.
Htxenuj said:
Hmm. Can you show me a guide sir? On reinstalling? 'cos I dont know what to do since I am stuck on a blank screen.
Click to expand...
Click to collapse
There is already a guide available for how to flash stock rom, which you can check out here. You can get the stock rom from sammobile, the official samsung firmware resource which you can check out here.
Good luck!
Edit: You can then try to reflash twrp and if it doesn't work, post about it in the twrp thread for your device.
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
Samsung doesn't use fastboot, they use download mode and flash with Odin. Be familiar with these kinds of specifics about a device if you're going to give advice, otherwise you might tell someone something very wrong unintentionally.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Samsung doesn't use fastboot, they use download mode and flash with Odin. Be familiar with these kinds of specifics about a device if you're going to give advice, otherwise you might tell someone something very wrong unintentionally.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Adb: Recover > Update from ADB
Fastboot: Boot to download mode > fastboot access on most devices (confirmed on my S4)
RAZERZDAHACKER said:
Adb: Recover > Update from ADB
Fastboot: Boot to download mode > fastboot access on most devices (confirmed on my S4)
Click to expand...
Click to collapse
adb works on Samsung, fastboot does not.
Sent from my SM-S903VL using Tapatalk
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
How can I boot to Download mode since I am stuck at blank screen?
Htxenuj said:
How can I boot to Download mode since I am stuck at blank screen?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=gYA3ZMlDO3Q
Htxenuj said:
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Click to expand...
Click to collapse
i have 2 of this devices,they all go to same trouble,never show twrp. no change no picture just blank (seems grey into black)
Suryo75 said:
i have 2 of this devices,they all go to same trouble,never show twrp. no change no picture just blank (seems grey into black)
Click to expand...
Click to collapse
It fix by using cwm, twrp is not compatible with twrp especially g530h which is has xxu based
Suryo75 said:
It fix by using cwm, twrp is not compatible with twrp especially g530h which is has xxu based
Click to expand...
Click to collapse
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
Just visit link with quote cwm for g530h
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
CWM is a dead project, it is no longer supported, that is why you are only finding TWRP. If you want custom recovery, use TWRP, it is a much better recovery than CWM anyway.
Sent from my LGL84VL using Tapatalk
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
try this
Is their any solution to use twrp on g530h xxu based?
On flashing many custom roms through cwm, their is nothing on screen but gray broken lines.
Please help if anyone have it's solution.