I'm new to rooting and installing custom roms. I used unrevoked 3 to root my ego, then I created an nandroid and wipe my phone. Next, I rebooted the phone to download the free version of ROM manager from the market. I used the ROM manager to download cyanogenmod 6 (stable). After downloading the rom, I did as the screen prompted me and wipe the phone and created a backup. From here the installation process begins and end with
Welcome to Cyanogenmod 6.0.0-supersonic assert failed: getprop ("ro.bootloader")="0.76.2000"//9.000"
E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
I haven't a clue what to do at this point.
Can someone please help?
"E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
Read this link, I think it is about the same problem.
http://www.actuarialoutpost.com/actuarial_discussion_forum/showthread.php?t=195406&page=46
If I still can not post a link cause I am new, then I googled this:
mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
I got three hits, read the first one "maybe we need and android tweeking ...."
Also check this out. I am tempted to say you downloaded the link to the actual file that you want and not the file. Here is the link to the actual file.
http://mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
Click that link and then you download the file you need.
Ref:
http://androidforums.com/evo-4g-all-things-root/175655-cyanogen6-link.html
hey,
thanks for trying to help. I'm still having the same problem.
No app2sd partition found. Skipping format of /sd-ext. (is this the problem?????)
--Installing: SDCARD: /clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
Finding update package...
Opening update package...
Installing update...
Welcome to Cyanogenmod-6.0.0-Supersonic!
assert failed: getprop("ro.bootloader") =="0.76.2000"
getprop("ro.bootloader")=="0.79.0000"
E: Error in /sdcard/clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue
PLEASE HELP....
i rooted using exploit v 2.3.0 with superuser.apk and it worked on my epic since i see superuser. the problem i have is that when i download rom manager and install clockworkmod 2.5.1.0 from rom manager for my epic. then i proceed to backup current rom, i give it a name and then reboots my phone to factory recovery and this is what i see:
android system recovery <2e>
samsung recovery utils
-for BML-
reboot system now
apply sdcard:update.zip
wipe data cache
wipe cache partition
install from package...
finding update package
opening update package
verifying update package
E:failed to verify whole file signature
E:signature verification failed
insstallation aborted
can anyone help me backup so I can download new roms afterwards.
Clockwork didn't install bro. Try using the run last.bat, that one works when not rooted, I had issues when already rooted sometimes. You could also try selecting apply update.zip, I think flashing recovery in rom manager puts an update.zip on your sd which opens cockwork recovery when applied from stock rec
Sent from my SPH-D700 using Tapatalk
where can I find the run.bat file? I have looked in the clockworkmod folder on the sdcard, not there tho.
selecting apply update.zip also does the exact same thing
android system recovery <2e>
samsung recovery utils
-for BML-
reboot system now
apply sdcard:update.zip
wipe data cache
wipe cache partition
install from package...
finding update package
opening update package
verifying update package
E:failed to verify whole file signature
E:signature verification failed
installation aborted
Hi all,
Would appreciate any assistance with this as I'm going back and forth on this topic on the net and hitting dead ends at every turn.
Firstly, I have a Samsung Galaxy S2. It is ROOTED (using S2root). I have installed ROM Manager and Clockworkmod. 4.0.0.15.
I was using these instructions
*URL prevented by forum* but it was on androidpolice.com website -- to get to be able to do a full NAND backup before I screw about with anything. However, I cannot. Whenever I choose to do a full backup from rom manager my phone restarts and I get
Android System Recovery (3e)
4 options not including backup or restore (i.e. reboot, install update from sd,wipe data/factory reset, wipe cache partition )
and at the bottom of the screen
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted
and won't go any further
I've read forum posts elsewhere on 'toggling verification on/off' but there is no option to do this in any menu, including ROM Manager's even under Advanced. I've seen other posts that show a toggle in the Clockworkmod menu but I never get there - it only restarts in Android System Recovery not Clockworkmod recovery menu.
Does anyone have any sensible suggestions that would help please?
thanks
Mark
Hello every body
I have a problem during installing a new ROM
i have samsung galaxy SL i9003 and i this phone was in CM 10.1 alpha 8
I tried to upgrade my phone to CM10.2 Rom
and this is the link of the ROM : http://forum.xda-developers.com/showthread.php?t=2431402
first i return to DDLF2 then go to recovery mode
i do wipe data / factory rest
After that when i select the Rom zip folder from Sdcard to install
the phone tell me :
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "captivate" ||
getprop.("ro.build.product") || ... (and so on)
E:Error in /sdcard/#whateverpackage#.zip
Status 7
Installation aborted.
there is any help ??
don't format system after flashing ddlf2. directly install 10.2 over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2.
4) wipe data/reset. (optional)
(don't format anything or else it will give you that error)
hope this helps you.
maxs8007 said:
don't format system after flashing ddlf2. directly install 10.2 over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2.
4) wipe data/reset. (optional)
(don't format anything or else it will give you that error)
hope this helps you.
Click to expand...
Click to collapse
Thank you very much
i will try and tell you
but in the link of The ROM the installation instruction is :
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
so wipe data/factory rest is before installing the ROM zip and that what i did
flash cf root for ddlf2 first. and you posted on the wrong section.
Sent from my Nexus 4 using xda app-developers app
format system and sdcard bro !!!
dr_amjad said:
Hello every body
I have a problem during installing a new ROM
i have samsung galaxy SL i9003 and i this phone was in CM 10.1 alpha 8
I tried to upgrade my phone to CM10.2 Rom
and this is the link of the ROM : http://forum.xda-developers.com/showthread.php?t=2431402
first i return to DDLF2 then go to recovery mode
i do wipe data / factory rest
After that when i select the Rom zip folder from Sdcard to install
the phone tell me :
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "captivate" ||
getprop.("ro.build.product") || ... (and so on)
E:Error in /sdcard/#whateverpackage#.zip
Status 7
Installation aborted.
there is any help ??
Click to expand...
Click to collapse
Ok,i just encountered this problem just right now ,with clean install ,so after i clicked wipe data /factory reset , i clicked instal zip from rom ,chosed rom ,after this phone restarted and entered again in CWM ,when i chosed again install zip from sd etc... encountered this error ,so i go back in main menu and chose wipe data /factory reset again ,and after this it worked like a charm to install the rom ,no error was displayed. I hope it will work for you to !
LoLaTiOn said:
format system and sdcard bro !!!
Click to expand...
Click to collapse
formatting the system will remove the baseband which wont allow 10.2 to install. i'd encountered the same problem 2 days back and i'd solved the way I mentioned above.. to cross check the error again (2nd time) I formatted the system after clean flash of ddlf2 and I got the same error.. just installing 10.2 directly over ddlf2 won't cause any problem.
---------- Post added at 09:11 AM ---------- Previous post was at 09:05 AM ----------
dr_amjad said:
Thank you very much
i will try and tell you
but in the link of The ROM the installation instruction is :
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
so wipe data/factory rest is before installing the ROM zip and that what i did
Click to expand...
Click to collapse
"wiping date/factory reset " won't cause any problem. just don't format any thing.. if you want you can format SD Card for your satisfaction.. but don't format system or else that will lead to that error.
hey bro flash only cf-root or bam kernel and don't format system if the installation failed you will have to flash DDLF2 again.
THE SAME ERROR occur again ~~!!
I tried more that 10 times to return to DDLF2 then upgrade my phone to cm10.2 dhirru Rom 4.3 android and the same error appear in every time !!
ASSERT FAILED status 7
Now moment i returned to DDLF2 and upgrade my phone to cm10.2 alpha 8 dhirru ROM and it success upgrading
It's the only Rom which flashing occur Successfully
So , there is NO HELP ?!
Asset failed. Mean either wrong rom or wrong phone.
I saw your error show "captivate". Are you sure you in the right forum..? Btw. Here is galaxy sl gt-i9003 and 9003L
Sent from my Galaxy Nexus using Tapatalk 4
i had the same error while installing cm10.2 it gave me the same error(status 7).device only would go in recovery mode.after that i downloaded the rom again and it worked.the download was corrupt.so download again and try. :fingers-crossed:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
dr_amjad said:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
Click to expand...
Click to collapse
you try bypass the assert check by delete those line in rom zip file, the file is updater-script in folder
"CM10.1-GalaxySL-JDQ39E-Alpha7/META-INF/com/google/android"
Code:
assert(getprop("ro.product.device") == "galaxysl" || getprop("ro.build.product") == "galaxysl" ||
getprop("ro.product.device") == "GT-I9003" || getprop("ro.build.product") == "GT-I9003" ||
getprop("ro.product.device") == "GT-I9003L" || getprop("ro.build.product") == "GT-I9003L");
open up the zip without unzip it, just open with winrar than edit than save.
this is a try, never try it before for our phone.
---------- Post added at 08:20 PM ---------- Previous post was at 08:15 PM ----------
dr_amjad said:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
Click to expand...
Click to collapse
just found out the ROM download site having 2 type of CM10.2, one is for LG Optimus black others one for GT-i9003
makesure you download the correct one
@chongns : Thanks very much for help
Every thing now i being OK
I download the Rom Again and download gapps
Then i tried to flash the rom and tell me the same error ( status 7 )
then i do Wipe Data / Factory Reset one time and repeat it again
Then i choose the ROM zip and it flashed OK
all what i do that i did Wipe Data / Factory Reset twice followed by each other
Thanks very much for helping me
dr_amjad said:
@chongns : Thanks very much for help
Every thing now i being OK
I download the Rom Again and download gapps
Then i tried to flash the rom and tell me the same error ( status 7 )
then i do Wipe Data / Factory Reset one time and repeat it again
Then i choose the ROM zip and it flashed OK
all what i do that i did Wipe Data / Factory Reset twice followed by each other
Thanks very much for helping me
Click to expand...
Click to collapse
although, you have flash through, but that still weird to have error status 7.
btw, the correct step should be factory reset than flash the zip, yous is flash the zip than factory reset.......
chongns said:
although, you have flash through, but that still weird to have error status 7.
btw, the correct step should be factory reset than flash the zip, yous is flash the zip than factory reset.......
Click to expand...
Click to collapse
yes
i did first Wipe Data / Factory Reset two times each one follow the other then i flashed the Rom zip
Working method (tried several times with different roms):
-flash DDLF2
-flash cfroot
-recovery mode (the green one)
-flash your rom, then you'll be bringed to the new version of cwm (the blue one)
-wipe data/factory reset
-format system
-flash the rom
Hi all:
I'm also getting this issue lately, and I use to solve it going to mounts and storage and mounting all the filesystems, then try again.
Looks like the updater script can't mount the file systems automatically or something lately and so it gives that error.
Hope this solves your issue.
BTW, I also saw it extrange that the assert of the zip you were flashing indicated captivate, our device codename for CyanogenMod is galaxysl, not captivate, make sure you're flashing the right zip. (Also, captivate is not p970 either, so you should have mistakenly downloaded the zip from somewhere else).
Sent from my GT-I9003 using xda premium
Simply copy the file to internal SD card and flash it. Problem solved for me.
Sent from my GT-I9003 using xda app-developers app
sam_777 said:
Simply copy the file to internal SD card and flash it. Problem solved for me.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Here's the solution to this problem
So here is the problem, I have team win recovery v2.4.0.0, I wiped all the system and cache. After that I tried to install the rom I got witch is Autodroid-Grouper-4.4.4.build.1.2 and it failed
it goes like this :
Format and Mount System, Mount Data...
symlinks and permissions...
set_metadata_recursive: Some changes failed
E:Error in /sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
(status 7)
Error flashing zip '/sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
updating partition details...
now I can't connect the tablet to my computer to transfer a different rom in it because the tablet boot in team win
what should I do
XDA Visitor said:
So here is the problem, I have team win recovery v2.4.0.0, I wiped all the system and cache. After that I tried to install the rom I got witch is Autodroid-Grouper-4.4.4.build.1.2 and it failed
it goes like this :
Format and Mount System, Mount Data...
symlinks and permissions...
set_metadata_recursive: Some changes failed
E:Error in /sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
(status 7)
Error flashing zip '/sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
updating partition details...
now I can't connect the tablet to my computer to transfer a different rom in it because the tablet boot in team win
what should I do
Click to expand...
Click to collapse
Hello, and welcome to XDA!
TWRP should allow for adb access, you should be able to push a different ROM zip to your device. Such as:
Code:
adb push name-of-rom.zip /sdcard/
Then there is also the fire-breather method:
> Nexus 7 > Nexus 7 Q&A, Help & Troubleshooting > [GUIDE] Flashing a Factory Image with fastboot / return to stock
If you go this way, read and understand everything before continuing. Any questions about it, can go in that thread (once you have an XDA account).
Hope this helps, and good luck!