Related
Well I got seriously bored of the Battery cover and bottom piece. I was just never a fan of the bronze like tint to it.
I initially started with the Ol Touch Pro battery cover method using Rit Dye.
The results were great but it started running leaving my hands tinted =-(.
I placed an order for paint which arrived but was the wrong finish so Im awaiting the return shipment.
In the meantime I went ahead and started on the Battery Cover/Bottom panel with some left over paint I already had.
Im using Krylon Fusion but I may regret not switching to Duplicolor as there bonding is to plastics may be better. Im worried that the teflon coating of the pieces may mess up the finish.
Removing the bottom panel is a PAIN unless you have a pry tool. I highly suggest going to Ifixit.com and order a few of there tools if you make a habit of pryin open phones/electronics. They help out a bunch.
http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000
This is what I used for bottom panel.
Second problem was the little metal contacts. Fortunately I have no intention of getting a dock. They are too small to duct tape and was worried about removing them. If they are removable I may just do it after as scraping the paint off copper shouldnt be a big deal.
Masking the camera is a pain as the metal circle doesnt give one an indent to xacto blade smoothly. It was a bit of trial and error but definitely doable.
Anyways pics of coat one below. I wont continue until I get the right sandpaper and paint finish. Still tossed up between gloss and matte.
This was my original goal.
http://www.colorwarepc.com/p-216-nexus-one.aspx?2907=54726&2908=54787&2909=54877&2910=54955
I really like the black covers and the way it now matches the front paneling. I may not rip the rest apart to paint it white just yet.
Much prefer stock compared to that to be honest.
I know you're not done but the finish doesn't look to great.
Yeah the finish is nowhere near done. But the contrast the black creates is just alot better.
Already had someone ask me what phone I'm using ... in 11 months that's only happened twice.
Hopefully it'll look the way I intend it to.
wet sand, wet sand, wet sand
also make sure to use super high grit paper.
dont be afraid to wet sand the clear coat either...its necessary to keep it glossy with out any orange peel
ewwwwwwwwww
Here's to destroying the resale value of the your phone I do appreciate the idea though and DIY mentality.
irishrally said:
Here's to destroying the resale value of the your phone I do appreciate the idea though and DIY mentality.
Click to expand...
Click to collapse
lol Same thing was said about my G1.
After I changed it to all white I sold it for 50$ more than I paid.
I was REALLY bored. With Gingerbread not around yet I figured why not.
seeking said:
wet sand, wet sand, wet sand
also make sure to use super high grit paper.
dont be afraid to wet sand the clear coat either...its necessary to keep it glossy with out any orange peel
Click to expand...
Click to collapse
Thanks for tip about the clear coat.
Already ran into some trouble as the paint doesnt seem to adhere as good as I thought. I went at it without adhesion promoter..may have to hit the do over if it doesnt settle well.
xManMythLegend said:
Thanks for tip about the clear coat.
Already ran into some trouble as the paint doesnt seem to adhere as good as I thought. I went at it without adhesion promoter..may have to hit the do over if it doesnt settle well.
Click to expand...
Click to collapse
Did you sand the pieces before painting?
Your paint is going to fall off if you didn't.
It's the entire idea behind teflon coatings.
A little painters trick. Next time don't try to tape off the contacts (or any small area) just get a toothpick and some Vaseline. Put the Vaseline on the contacts then paint. After you are done just wipe clean.
Also watch your flash time between coats. Believe it to not wet paint doesn't bond to dry paint that well. You first coat should still be a little tacky when applying your second coat.
JCopernicus said:
Did you sand the pieces before painting?
Your paint is going to fall off if you didn't.
It's the entire idea behind teflon coatings.
Click to expand...
Click to collapse
Only a light sanding. I did the same with the G1 and had zero issues (I did use adhesion promoter with that one though). Nexus one must have super super teflon.
[IO]ERROR said:
A little painters trick. Next time don't try to tape off the contacts (or any small area) just get a toothpick and some Vaseline. Put the Vaseline on the contacts then paint. After you are done just wipe clean.
Also watch your flash time between coats. Believe it to not wet paint doesn't bond to dry paint that well. You first coat should still be a little tacky when applying your second coat.
Click to expand...
Click to collapse
Great tip.
I actually tried that with Elmers but vaseline would be MUCH easier for the tiny spots.
I may have let it dry too long. I normally have only painted in warm weather months so I can let it sit longer. With the cold weather it seems I have to reduce time between coats.
BTW
How many coats of clear coat is recommended ?
I only had my G1 a few months after painting when I sold it. If I plan to keep the N1 for longer ((no trackball or leds on Nexus S *sigh* Im looking for more durability.))
I recall reading on another forum where someone skipped clear coat altogether and put a zagg/BSE ever on top and it looked great after over a year of usage.
I would prefer spending $15 on full back black available on ebay rather than painting, it doesnt look smooth and highly finished.
charnsingh_online said:
I would prefer spending $15 on full back black available on ebay rather than painting, it doesnt look smooth and highly finished.
Click to expand...
Click to collapse
You mean a case ?
Cant stand the extra bulk.
Anyways..
Had to go back and sand everything off to get all the teflon removed.
What a pain.
I did the bottom piece over much improved. Battery cover will have to wait till after turkey day.
xManMythLegend said:
You mean a case ?
Cant stand the extra bulk.
Anyways..
Had to go back and sand everything off to get all the teflon removed.
What a pain.
I did the bottom piece over much improved. Battery cover will have to wait till after turkey day.
Click to expand...
Click to collapse
There's a couple of people selling black battery covers/antenna bottoms on ebay. With htc/google logo and all.
heres some pics of my painted nexus.. decided to paint it while waiting for replacement digitizer and lcd came in.. one coat primer -> lite sanding -> 2 coats rustoleum flat white -> lite wet sand (just to knock off some of the orange peel) -> 2 coat clear matte rustoleum (not a fan of glossy finishes) -> wet sand.. was going to do the battery/bottom, but am not sold on paint holding up well to that rubber.. will probably end up buying the black ones of ebay later on..
famandeggs, your Nexus looks amazing. Excellent job.
Expecting more pictures once you collected the black Nexus covers and complete your project.
Kelvino9 said:
famandeggs, your Nexus looks amazing. Excellent job.
Expecting more pictures once you collected the black Nexus covers and complete your project.
Click to expand...
Click to collapse
thanks man, will do.. it was a frustrating process lol.. i first tried a gloss enamel gloss paint, but the cure times where a pain (48 hours), and im all thumbs (dropped it a couple times while it was still drying, or wet sanded it to far down exposing the aluminum, forcing me to start over).. eventually just went w/a normal paint, im hoping w/the clear it'll hold up
famandeggs said:
thanks man, will do.. it was a frustrating process lol.. i first tried a gloss enamel gloss paint, but the cure times where a pain (48 hours), and im all thumbs (dropped it a couple times while it was still drying, or wet sanded it to far down exposing the aluminum, forcing me to start over).. eventually just went w/a normal paint, im hoping w/the clear it'll hold up
Click to expand...
Click to collapse
I can only imagine all your efforts you put in. Judging the pictures the paint job looks amazingly smooth.
Kelvino9 said:
I can only imagine all your efforts you put in. Judging the pictures the paint job looks amazingly smooth.
Click to expand...
Click to collapse
looks very nice indeed. but you got dust on your camera lens
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Droidicus said:
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Click to expand...
Click to collapse
Theres away to do this using selecon u may search it here or in google peace
Sent from my Sensation using XDA
Droidicus said:
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Click to expand...
Click to collapse
You might want to apply some silicon around the screen's edges to prevent dust. The one I used was Ultra Black.
After that, get a case that seals the edges as well. I use the Incipio case, real good material and a great snug fit.
After that, get a case that seals the edges as well
I'll have to check this case out. I've already had my phone replaced once under warranty with TMO but I've already gotten dust under this screen too. And this after TMO told me that they HTC had "fixed" the issue. Obviously not. Going to swap this one out again before my warranty is up in a month or two.
bofiana said:
After that, get a case that seals the edges as well
I'll have to check this case out. I've already had my phone replaced once under warranty with TMO but I've already gotten dust under this screen too. And this after TMO told me that they HTC had "fixed" the issue. Obviously not. Going to swap this one out again before my warranty is up in a month or two.
Click to expand...
Click to collapse
Yep, a case definitely helps. Especially one that rises over the screen and covers the edges. It seals the phone from dust. Doesn't hurt opening the phone up daily and cleaning it with a q-tip too.
i have the same problem
hey ungraph
can u post pics as to where on the screen you applied the silicon gel. There is too much dust under my screen and its increasing by the day
I prevent dust under my screen successfully by using a plastic phone case that wraps over the corners of the phone and snaps tightly.I've had my device for almost a year now and the case has prevented the dust from coming under the screen! You can buy these types of cases on amazon very cheap about 5 dollars . They have a huge selection. Or you can try the silicone tricks. Personally I'd much rather use the case than put silicone on my device. These cases snap tightly shut and are hard plastic. They are not easy to get off but very effective in preventing the dust from entering! Hope this helps. It works for me! I also use a screen protector so the cases is wrapped Over the protector.
It's nice and tight . No dust whatsoever! I'd give it a try. Make sure to get the hard plastic case the others Are not tight enough. Best wishes! The top of the case covers the corners . It works wonderfully! It's up to you in whatever you decide to do but at least you have another option. It works like a charm!
Sent from my HTC Sensation 4G using xda premium
Just curious how you guys are keeping the white back of the phone clean. I bought a white HOX a few days ago and absolutely love it (came from a droidx). Rooted, unlocked, and on cleanrom, and I have to say it makes my old x seem like something from the '80s. Only problem I"m having is keeping it clean. The screen isn't a problem (or at least one I'm used to with touchscreen phones) but the white back keeps turning brown or w/e when I goto use it when I'm working on my jeep and what not. I know I should probably clean my hands a bit better buts its a PITA to clean them completely off just to check what a text says. So far a little saliva and a microfiber towel has cleaned it up nicely, but I was wondering if anyone had any ideas or advice on other products I can use to clean when it gets dirty without damaging or turning the plastic yellow or something.
And no I am not using a case or screen protector, never had one on my x and after two years it still looks like new, I'm a believer in this fancy dancy gorilla glass lol.
So again, I'm not looking for advice on how to keep it clean, but how to clean it I guess. I hate to use some simple green or something and have it eat away the finish or something
Thanks!
yeah I've been having similar issues, I want to try a clorox wipe but have a feeling it will make it yellow
mine's pretty clean. but i'm a neat freak, and that's a totally different story..
what works for me is a mix of diluted rubbing alcohol. slap some of that on a cottonball/swab and just clean. wiping down afterwards with a microfiber cloth.
mine started getting a little dirty/discolored.
I had some screen cleaner and a micro fiber cloth at work, and just wiped it down.
completely white again.
Mines almost perfect, aside from a tiny black mark, but I use a case with mine.
I suggest waterproofing the phone, just send it in to that company that does it, I'm sure that stuff will protect against stains and oils as well as the water.
Sent from my HTC One X
I use windex, couple squirts on a soft paper towel and any grime comes right off.
Owned a white blackberry and its looked just as good 3 years later using this method.
I appreciate the input very much guys, thanks! Some good ideas here.
I wonder if I could put a coat of wax (like that nxt tech wax) over the back of the phone, I imagine if it went on well it would hold up nicely.
Do you have any suggestions or recommendations on a place to get it waterproofed?
Ummm interesting.
I use MrClean Magic Eraser. Doesn't leave any stains, or residue on the back it works great and it's safe.
Does that scratch it?
No it doesn't scratch it. As Mr Clean magic eraser are non abrasive.
That's what I read, ive never used one though. they remind me of the sandpaper sponge things you use for drywall work so I just picture it scratching the he'll out of it lol
They are an abrasive just a light one over time you will probably polish the phone.
I dont have any suggestions for cleaning methods, but jsut wanted to chime in to say that I've been using mine 4 about 6 weeks and it's stain-free. I do wash my hands quite a bit and have encountered a couple situations where I chose not to use the phone until I cleaned my hands. I did inadvertently get chocolate on the back once, and noticed about a half hour later, but the smudge cleaned up pretty neatly with a damp paper towel. Overall, I'm quite impressed with how well this white back has held up. The matte finish is smoothing a little where I commonly grip the phone, but far less than I anticipated.
There's a thread about this already but I'll chime in have had the white one x since May 4th never had a case on it and mine still looks fantastic I've used Windex, Clorox disinfecting wipes, citrus surface cleaner, water, dish soap, spit, and my personal favorite baby wipes none of the above have ever discolored my phone and all have done the job.
Sent from My Nocturnalized Beast
fitchpuckman said:
I dont have any suggestions for cleaning methods, but jsut wanted to chime in to say that I've been using mine 4 about 6 weeks and it's stain-free. I do wash my hands quite a bit and have encountered a couple situations where I chose not to use the phone until I cleaned my hands. I did inadvertently get chocolate on the back once, and noticed about a half hour later, but the smudge cleaned up pretty neatly with a damp paper towel. Overall, I'm quite impressed with how well this white back has held up. The matte finish is smoothing a little where I commonly grip the phone, but far less than I anticipated.
Click to expand...
Click to collapse
E.Cadro said:
There's a thread about this already but I'll chime in have had the white one x since May 4th never had a case on it and mine still looks fantastic I've used Windex, Clorox disinfecting wipes, citrus surface cleaner, water, dish soap, spit, and my personal favorite baby wipes none of the above have ever discolored my phone and all have done the job.
Sent from My Nocturnalized Beast
Click to expand...
Click to collapse
Thanks guys that's really good to hear. I'm sure you know what I was referring to when I said about the white finish seeming like it'd 'soak up' stains, I got some ink on mine today (I run a 4 color printing press), hit it with some blanket wash and it came off looking like new.
I tried searching twice, do you have a link to the other thread you were talking about?
Thanks again guys
I had a blue case on mine for a while and took it off yesterday to find the whole back of the phone blue. how do i remove this blueness?
As a phone of raw denim, my white is pretty much completely blue.
cuteyr said:
I had a blue case on mine for a while and took it off yesterday to find the whole back of the phone blue. how do i remove this blueness?
Click to expand...
Click to collapse
I doubt you can. This kind of plastic absorbs stains and can be next to impossible to clean once that happens. You can probably remove some of it off, but most of the blue tint is likely permanent.
You might try a 10% bleach solution and see if it helps.
Kept mine in a TPU case since last year...still as white as when I unboxed it.
Sent from my HTC One X using xda app-developers app
I posted this in the screen protector thread but since so many people have had this problem with TGSPs on the 6P I thought it deserved its own thread. After applying my Intelliarmor TGSP I noticed, like many others, that the lower right corner had an area that was not sticking properly. I am not sure whether this is due to a defect in the screen or the screen protector but this seems to be a common problem. After not being able to get it to stay down by using pressure overnight I decided to try to see if heat would work. I took a hair dryer and turned it on high and focused the air on the unruly corner and heated it up for about 30 seconds while making sure the phone did not get too much heat. After the TGSP was pretty warm I removed the heat and held the corner down till it was cool. Low and behold this worked to get it to stick! Not sure if it subtly allowed the screen protector to bend to the screen or if the heat allowed the adhesive to bond properly, but either way it worked and has held for the past day. If you are having this problem give it a try. Can't hurt.
I had the same issue with my nexus 5. I did the exact same thing to fix it too.
I had this issue with my nexus 6p except on the top right corner. No amount of heat and pressure fixed it. I ended up doing an rma. The screen protector went down perfect on the new phone.
There are no females in my household, nor do I know of any close friend females that is within 50km from me even tho I live in a megacity, so I have to now go to Kmart to buy a hair dryer. Damn you intelliArmor.
It's just too risky to use a candle or a lighter.
zeitgeb3r said:
There are no females in my household, nor do I know of any close friend females that is within 50km from me even tho I live in a megacity, so I have to now go to Kmart to buy a hair dryer. Damn you intelliArmor.
It's just too risky to use a candle or a lighter.
Click to expand...
Click to collapse
Sounds like you need to get more than a hair dryer while you are out.
zeitgeb3r said:
There are no females in my household, nor do I know of any close friend females that is within 50km from me even tho I live in a megacity, so I have to now go to Kmart to buy a hair dryer. Damn you intelliArmor.
It's just too risky to use a candle or a lighter.
Click to expand...
Click to collapse
Walmart / Lowes / Home Depot / etc sell inexpensive heat guns. More useful than a hair dryer, I'd bet. Just be aware: They get hotter than a hair dryer.
I don't have any issues with Skinomi TGSP
I tried this two days ago for about 30 seconds then another 30 seconds about 3 times total. It helped and the lift is only in the very small corner but I still see it. I will wait a couple of days to see if it gets worse. Then I'll try it again. Maybe longer time,just didn't want to burn or damage the screen with heat. Don't really want to waste my spare that I have just to fix this corner thing. Is yours lifting at all? I will request replacements from intelliarmor when they get there thinner glass I suppose. Not sure if thinner is weaker. Sounds like it would certainly be.
Sent from my Nexus 6P using Tapatalk
grubbster said:
I posted this in the screen protector thread but since so many people have had this problem with TGSPs on the 6P I thought it deserved its own thread. After applying my Intelliarmor TGSP I noticed, like many others, that the lower right corner had an area that was not sticking properly. I am not sure whether this is due to a defect in the screen or the screen protector but this seems to be a common problem. After not being able to get it to stay down by using pressure overnight I decided to try to see if heat would work. I took a hair dryer and turned it on high and focused the air on the unruly corner and heated it up for about 30 seconds while making sure the phone did not get too much heat. After the TGSP was pretty warm I removed the heat and held the corner down till it was cool. Low and behold this worked to get it to stick! Not sure if it subtly allowed the screen protector to bend to the screen or if the heat allowed the adhesive to bond properly, but either way it worked and has held for the past day. If you are having this problem give it a try. Can't hurt.
Click to expand...
Click to collapse
No curved screen on this device, likely that the one you received was a defective one. Sounds like a pain if you're going to have to resort to using heat to keep it down!
Question, I'm new to Tempered glass. MY TGSP is lifting in the bottom left corner. I'm going to order a new one. Anything special I need to do in taking the old one off to avoid damaging the screen? I still have it on the phone. Appreciate any advice, new to this.
living37 said:
Question, I'm new to Tempered glass. MY TGSP is lifting in the bottom left corner. I'm going to order a new one. Anything special I need to do in taking the old one off to avoid damaging the screen? I still have it on the phone. Appreciate any advice, new to this.
Click to expand...
Click to collapse
No, just lift it at one edge, it should come off easily.
I can recommend the TGSP by Orzly. Sticks very well to each corners and is pretty slim.
.vermilion said:
No, just lift it at one edge, it should come off easily.
I can recommend the TGSP by Orzly. Sticks very well to each corners and is pretty slim.
Click to expand...
Click to collapse
Thanks, I just wanted to double check. I just ordered the Supershieldz because of free shipping and it is a 2 pack. About every TGSP I look at has good and negative comments.
My ultra is now 3 months old. I have the burgundy version. Even though I’ve been particular about cleaning it there is a tiny paint chip on the camera
https://imgur.com/Yb9IkHY
small permanent case markings that look like dust particles.
https://imgur.com/hSyYaMo
tried using one of lens wipes to clean it but it didn’t come off.
I’m curious how phones are holding up for you guys.
Still pretty much same condition as when I took it out of the box, already had the case & screen protector waiting so I didn't waste any time when it was delivered.
AlphaTekk Epoch said:
Still pretty much same condition as when I took it out of the box, already had the case & screen protector waiting so I didn't waste any time when it was delivered.
Click to expand...
Click to collapse
I actually didnt notice these small dots. Looked pristine to me but when I was cleaning and saw them in direct light it was noticed. What color do you have? Can you share a photo of the bottom of the phone?
BrokenBee said:
...there is a tiny paint chip on the camera
Click to expand...
Click to collapse
Could you please mark it, it looks ok for me.
ZXR said:
Could you please mark it, it looks ok for me.
Click to expand...
Click to collapse
8 o’clock to the laser autofocus. Small white spec.
Any chance you can post a photo of the bottom of your phone?
Attached.
Leave rhe plastic film on the phone if using a case. Dust scratches the plastic instead.
ZXR said:
Attached.
Click to expand...
Click to collapse
Ah seems like you have it too slightly?
volcolm said:
Leave rhe plastic film on the phone if using a case. Dust scratches the plastic instead.
Click to expand...
Click to collapse
Well I’ll be doing that next time. Already removed em
I was actually surprised how easy the screen has gotten a ton of small little scratches, suppose its my fault for hating screen protectors and cases, finally started using Whitestonedome screen protectors and currently using the latercase.
Surprisingly the back of my phone still looks brand new
Mine is good so far. It comes out of the case every other day and it and the case get a wipe down with a damp cloth. Then dried with a microfiber cloth before going back in the case.
If you leave the phone in the case for long periods of time, abrasive particles will get in between the phone and case and the damage begins.
Mine is doing great. I treat it like my car; I use it as designed, clean it occasionally, and do a little maintenance every so often.
BrokenBee said:
Ah seems like you have it too slightly?
Click to expand...
Click to collapse
I would say no. If you think of this single spot on top, it was most likely a one dust particle.
ZXR said:
I would say no. If you think of this single spot on top, it was most likely a one dust particle.
Click to expand...
Click to collapse
They actually look like dust particles on mine too. They might seem less pronounced given your colour though. Mine wont wipe off completely.
I have the Black one and no scratches toll now (using without case) but camera has small Spot... The white one with no paint on the shell from my friend ist perfekt till now... Think next time i go for white
Put an Otterbox on the device right away but not a screen protector. The screen is extremely prone to micro scratches which can only be seen when screen is off, or with very low backlight and dark image (I've had the device a month an already some prominent micro scratches) . Awaiting screen protectors in the mail. This is a bummer as previous versions of gorilla glass stood up better to micro scratches (never had nearly the micro scratches on my S20 which I ran for 2 years without screen protection) . Pay off I guess for having better shatter protection.
Iv been running case with a naked screen ever since I realized that every protector ive tried affects either swipe typing and more so Spen responsiveness. Thank God tmobile allows you to add insurance to phones they offer regardless if it's bought from them or 3rd parties. The phone is just way to smooth for any obstructions for me.
no scratches