Hello all fellow developer, OP & members. I'am newbie here, sorry for trouble.... I trully need help, I have seen thread like this but no response Iam afraid I got no response too....
I recently bought this Note 3 chinese version because of its cheap price. It comes with gesture, steel stylush, internal 16gb, RAM 1gb, 5.7" screen. I buy this phone 2 unit, one for my mother, one for my gf.... but it turns out bad, my gf phone now stuck in bootloop..... use this phone not even a week jsut because of my fault !! I accidentaly soft brick my gf phone !!
Here's the story..... at first I back up my entire gf's SGS2 (official edition) using titanium backup and send it to Note 3 N9006 (china version) for my gf primary use, when I restore all it pop up 'force close com.android.phone' everytime this problem happen because I replaced the Phone App from Note 3 using Phone App samsung galaxy S2... this pop up will not appear if I do wipe chace on Phone App then restart..... I tried factory reset it doesn't help because I messed up with this Phone App that is categorized as system app that is embeded into ROM. Oh yeah after the Note 3 comes I rooted it using framaroot boromir exploit & it successfull can run any app root
I'am getting annoyed at this problem force close pop up, so I decided to install & restore original 'Phone App' of this Note 3 China version use different approach. I want do this to get rid of persistent pop up every time I restart, because sometimes I forgot to clear chace of this Phone App to prevent popup error. I have this Note 3 Chine Phone App backed up at first time, then I tried using app like CWM manager from playstore to install this Phone App' via CWM recovery install.... but it FAIL it says : siganture verivication failed. then AFTER RESTART I got stuck at samsung logo its definitelly BOOTLOOP problem. this is where I found out I'am in state of SOFT BRICK !!!! T-T
want to go to recovery mode, I tried key combination VOL_UP +Power. the interface shows up is all black, screen appear flipped rotated 180 degree from normal view, small font white color centered left aligned.
the menu is written like this
Select boot mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[recovery mode]
[fastboot mode]
[normal mode] <<==
the VOL_UP is working, it can navigate through 3 menu, but VOL_DOWN can do nothing. holding Power button 10 sec is restart.
my current usb debug option state is OFF so I can't use Odin method.....
I don't know what to do now.... I've already ordered online USB jig to force download mode & the package it still on the way. But, I have googling around this whole week found out many said MTK based Android Phone don't have download mode & can't install it using Odin..... so I think my final solution using USB jig its just seems hopeless..... please help me guys I'am desperate.
I think if at least I can do this just one at lsit bellow, my phone will normally boot again :
- factory reset then wipe chace from recovery mode (every combination I tried always go to 'Select boot mode' or normal boot stuck at bootloop), if I just can do recovery mode al things will go back to normal after wipe chace then restart
- if possible after USB jig comes, enter download mode then wipe chace. restart. normal boot again (untested)
- if possible after USB jig comes, enter download mode then flash custom ROM, firmware, & everything restart. fresh install (untested)
. . . . in above list, I don't know how to do it
Hi,
You've made a couple serious mistakes here. First, installing system apps from another device to yours is never a good idea and sure to cause many issues. And, you're trying to use Samsung proprietary apps that rely on the Touchwiz framework to function on your device. That will never work, and as you've witnessed, can mess your device up very easily.
Doing these things can cause force closes for sure.... And have a good chance at bricking your device depending on what you try to install.
So, you're only hope here now would be completely wiping your device and reinstalling the stock software. No, don't use Odin... It's only for Samsung. Your device is not a Samsung, at all. And be sure the firmware is for your exact model number.
I can't find any relevant threads on this on XDA, but here is a dedicated thread on your device that you can ask for help in,
> Android Development and Hacking > Android General > [Clone] HDC Galaxy Note 3 N9006
Good luck!
Related
Hi there!
I have this Huawei Ascend 540-U01, from Portugal, running (or not running) its original rom. It was working find until it start to run slow. At boot it was blinking a half screen wite square, from time to time it shows "process com.android.play stoped" and some other times "com.android.google stoped". At this point I decided to enter in recovery mode and wipe cache and reset to factory defaults. The problem ware not fixed with this action and I decided to "scan system" from the recovery mode too. It showed lots of files corrupted. Knowing it woldn't solve nothing I tryed again for a reset. Now, the system simply don't boot, but I'm able to reach the recovery mode.
May anyone guide me (or point me) to re-install the stock rom for this device? It was not rooted and I can't boot on normal mode.
Thanks
UPDATE - 03/11/2016
- Fastboot says: "Warning: App has root actions first in 2015-01-01"
I bought my phone about 3 months ago (Gionee p5w) and i had no custom roms installed. Yesterday i saw that there is a system update available. I think i rooted my phone using king root(not sure of version). Update on my phone wouldnt install... so i factory reset without clearing the phone memory thats when problem arised, nothing was reset except the text size setting. So i thought of going into factory mode to reset my phone and started phone with vol up and power key pressed . Factory mode didnt show up and now i am stuck in a bootloop. It shows bootloader logo and restarts again and again. I cant even go to normal mode and start my phone. I remember booting into factory mode when i bought it. Please help me fix it
aayushprime said:
I bought my phone about 3 months ago (Gionee p5w) and i had no custom roms installed. Yesterday i saw that there is a system update available. I think i rooted my phone using king root(not sure of version). Update on my phone wouldnt install... so i factory reset without clearing the phone memory thats when problem arised, nothing was reset except the text size setting. So i thought of going into factory mode to reset my phone and started phone with vol up and power key pressed . Factory mode didnt show up and now i am stuck in a bootloop. It shows bootloader logo and restarts again and again. I cant even go to normal mode and start my phone. I remember booting into factory mode when i bought it. Please help me fix it
Click to expand...
Click to collapse
Hello & welcome to xda-assist,
first of, we don't provide technical support here our job is to direct you through the boards here on xda-developers.
When you root your phone system updates will cause serious problems if you don't unroot before and revert all changes on system partition. So bootloop was expected to happen.
Only cure for that would be to reflash your phone's firmware, to find A) the appropriate firmware for your phone model and B) lern how to flash on your phone I would suggest you to visit this forum:
http://forum.xda-developers.com/android/help
and
Do a basic Google search on "your phone model + firmware" and "how to flash stock rom on your phone model"
Good luck
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
******i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.***********
semavi said:
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.
Click to expand...
Click to collapse
I don't understand.
You're saying that you successfully flashed it with your firmware and it started working. Does this mean you don't have an issue now? Or is there still a problem?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
yea i couldnt even open up the download mode it was saying RUN RDX TOOL but i just ignored whatever it says and tried to install it with odin till it succeeds after a few tries it just completed the installation and simply started to running.
Hello,
A few days back, when I was using my phone (redmi note 6 pro tulip), the screen suddenly greyed out and started rebooting. Within a minute, the phone went to mi-recovery 3.0.
Now, no matter how I try to reboot the phone (from recovery or by hard buttons) , it boots directly into recovery. Even If I don't do anything, it just cycles through the grey screen, mi logo, and recovery.
More info:
- The phone is completely stock, original MIUI 11 ( android 9.0) firmware from OEM. No root access, no unlocked bootloader or anything else like that. Warranty period is over.
- I can access fastboot mode.
- usb debugging isn't on iirc.
- I tried force shut down by hard buttons and disconnecting the battery, but when rebooting again, nothing changes.
- I tried booting to safe mode but it just shows a black screen and a small safe mode logo in the bottom left.
- mi-recovery 3.0 only allows to wipe all data, which is unfeasible since I have alot of unbacked data that I can't lose.
What can I do now? I've heard that flashing by edl method from an authorized account can save data. And something about a chinese mi pcsuite version. Could anyone provide more information on these? Or any other way to solve the problem?
I want to recover data (photos, videos and docs) and revive my phone.
Thanks in advance
Naa'vy said:
Hello,
A few days back, when I was using my phone (redmi note 6 pro tulip), the screen suddenly greyed out and started rebooting. Within a minute, the phone went to mi-recovery 3.0.
Now, no matter how I try to reboot the phone (from recovery or by hard buttons) , it boots directly into recovery. Even If I don't do anything, it just cycles through the grey screen, mi logo, and recovery.
More info:
- The phone is completely stock, original MIUI 11 ( android 9.0) firmware from OEM. No root access, no unlocked bootloader or anything else like that. Warranty period is over.
- I can access fastboot mode.
- usb debugging isn't on iirc.
- I tried force shut down by hard buttons and disconnecting the battery, but when rebooting again, nothing changes.
- I tried booting to safe mode but it just shows a black screen and a small safe mode logo in the bottom left.
- mi-recovery 3.0 only allows to wipe all data, which is unfeasible since I have alot of unbacked data that I can't lose.
What can I do now? I've heard that flashing by edl method from an authorized account can save data. And something about a chinese mi pcsuite version. Could anyone provide more information on these? Or any other way to solve the problem?
I want to recover data (photos, videos and docs) and revive my phone.
Thanks in advance
Click to expand...
Click to collapse
A lot of edl flashing articles on miui forum and mi community are 404 not found now. Please help!!
You solved? I'm with the exactly same problem and I found nothing specifically for this, plus, I tried wipe data already and it still doesn't work.
It maybe be button issue (the volume and power keys have gone bad probably). Remove the buttons from main board and try to boot into system.
I was facing the exact same problem.
And I discovered that it was caused because of the volume button that was kinda stuck, forcing the phone to enter recovery mode every time I tried to reboot it, as mentioned by @HumanBoy23.
After I got the volume buttons unstuck the phone booted normally.
So recently I tried completely wiping my cache from the recovery mode, but when I restarted the phone and held the power and volume up buttons, instead of entering recovery mode the phone just vibrated and booted normally. It then showed this message.
[PDP] Back-up : fail setup-wizard [ FINISH ]
Does anyone know what I can do to fix this ? I've already tried several times.
Erskinelink1 said:
So recently I tried completely wiping my cache from the recovery mode, but when I restarted the phone and held the power and volume up buttons, instead of entering recovery mode the phone just vibrated and booted normally. It then showed this message.
[PDP] Back-up : fail setup-wizard [ FINISH ]
Does anyone know what I can do to fix this ? I've already tried several times.
Click to expand...
Click to collapse
did you fix this? i have exactly same proble, i create custom AP from stock with magisk latest i wipe all partitions but when i flash it over odin i get same error
No, i still cant reset it. This is the feedback i get each time i try to hard tweet it
[PDP] Back-up : fail setup-wizard [ FINISH ]
No, i still cant hard reset it. This is the feedback [PDP] Back-up : fail setup-wizard [ FINISH ]
i think if you need a rooted phone just install lineageos is much faster and debloated than stock, i change my stock today to lineage and is amazing
when you change to lineageos install auroraoss store amazing app like google store
you can root lineageos so easy in recovery twrp install magisk zip thats all no problems at all
IF you want more options to play jest follow these post
[Guide] Running Linux on Android with 3D Acceleration / OpenGL (Root Required)
All credits go to: Hentacler for making Sparkle Meefik for making Linux Deploy Now on to the tutorial! Requirements: Sparkle Linux Deploy Termux Now you have all those apps installed lets continue Open Termux then enter: su Once in root...
forum.xda-developers.com
That message what you have i magisk recovery script.
Magisk is installed on recovery partition and when you hold that button when phone power on magisk installing to the phone thats why vibrate
If you wanna go to recovery mode just hold same button combo before phone start logo shows and keep long as possible and you must have connected usb cable to the pc if you press button combo when logo is already on the phone then magisk start installing and thats why its vibrate
When you will hard reset i think you gonna lose magisk and root.
That message what you have should say "backup success" i think magisk is broken and for me is not working too
When you will hard reset i think you gonna lose magisk and root.
That message what you have should say "backup success" i think magisk is broken
Erskinelink1 said:
No, i still cant hard reset it. This is the feedback [PDP] Back-up : fail setup-wizard [ FINISH ]
Click to expand...
Click to collapse
Do you fix this?
I have had that same issue. Unfortunately my partner's phone had a keylock on ii so these are the problems I had to face.
Draw the pattern several times but it never gave me the option to 'use a google account' so it carried on until I had to wait 65 minutes before drawing another pattern. Still no google account option.
I'd swipe down, select the wifi to get it to connect and it wouldn't let me look for my wifi to put a code in.
After a search, it gave me some software that I can download off Tenorshare so I downloaded it and tried which put me to the next problem, I couldn't get into the root menu to factory reset the phone and the phone wouldn't allow me to get into the diagnostic screen when I type on the *#09#*, I think the code is but you can get in via clicking the emergency call option. I'd volume up and power, it buzzed twice and still continued to the main samsung screen. The software from Tenorshare couldn't do much with it ie remove the google account but here's what else I did. I remembered that I used to upgrade firmware on samsung mobile phones via this website so I downloaded the Odin software, found the correct firmware from sammobile.com and that came up with something surprising. As much as I couldn't get into the root menu, I just believe that it's missing or corrupted,
so I connected the phone to the PC using the USB,
fired up Odin, Odin didn't show anything in the log but it after restarting the phone and pressing volume up and power, it buzzed twice and it went into a blue download screen and sat there. I thought, heyyyy this screen is usable.
The download for the firmware was complete and I unzipped it to it's 5 components, USERDATA, BL, AL and two others,
I had put the seperate files into the Odin software and clicked the start button. It uploaded the firmware successfully and restarted the phone so I did the volume up and power (I think I did it or the phone went into the root menu itself).
From there, I factory reset the phone, rebooted and it still asked for the draw pattern but I could set up the wifi, so since I was doing this late, I couldn't be bothered to phone the partner up to get all the email, questions etc.
So I rebooted the phone, went into the root and cleared the cache; this didn't really help at all because the draw pattern came up and when I used my gmail account; the phone wouldn't change the owner.
So I went back to the Tenorshare software and used the google account removal option and that worked;
The is completely clean and I can give it back to her, I did some google updates, galaxy store updates and it works fine. So just need to give it back.