Rooted phone Issues - General Topics

Hi All,
This is my first post.Actually I'm not sure if this is the correct section for my concern.
Anyway,I rooted my HTC one SV phone, I thought it was 100% percent successful.But everytime my battery goes empty, I always have to wait for few minutes, unplug usb/charger, remove battery then press power button to startup as led just flashing and battery indicator shows that phone is not charging.
Tried to do factory reset but stuck at enter recovery...
Can you please provide steps to address this issue.
Below is my phone details
K2 ul
s-on
Relocked
Thank you in advance!

try this
xinzhan said:
Hi All,
This is my first post.Actually I'm not sure if this is the correct section for my concern.
Anyway,I rooted my HTC one SV phone, I thought it was 100% percent successful.But everytime my battery goes empty, I always have to wait for few minutes, unplug usb/charger, remove battery then press power button to startup as led just flashing and battery indicator shows that phone is not charging.
Tried to do factory reset but stuck at enter recovery...
Can you please provide steps to address this issue.
Below is my phone details
K2 ul
s-on
Relocked
Thank you in advance!
Click to expand...
Click to collapse
try to solve with this methods
http://forum.xda-developers.com/showthread.php?t=1707550

what
slogger001 said

Related

My i-teq X-bond is Dead

Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran
s_m_s said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran
Click to expand...
Click to collapse
you can press start + ok + reset. it will help you recover your pda
salam
salam agha mohsen man ham moshkele shoma ro daram agar dorostesh kardin man ro ham khabar konid. 09195388556
ghorboone dastet
please help me out
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
SKYWOR said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash
Same Problem
I have been facing the same kind of problem. The phone light flashes when charging and when I boot the phone, it just shows the iteq logo. I have tried the Call Start+Call end+power combination but nothing happens. Sometime it shows the orange light besides the power button but the logo still remains on the screen. On one ocassion, it did enter some image mode but gave an error that no image found. I dont have the rom either to flash it. Can someone please post the rom online if they have it and also help if they have faced similar issues.
Iteq X-bond
try
Windows flag button (Start)+OK+reset
if it doesn't work then install new windows
reseting
1 press and hold the [WIndosFlag(start)] and [ok] buttons somultaneously
2 press and release the [reset] button
3 wait up to the leds in the keyboar flahsing 2 or 3 time (less tha 5 seconds)
4 release the [WIndosFlag(start)] and [ok] buttons
must be start the resetting to the fabrique settings
[WIndosFlag(start)] button is in the down left corner
[ok] button is in the down right corner
if this not works the the keypad is dammage
iteq x-bond totally drained battery
When the battery is totally drained, all you have to do is charge it. Now here is the tip. when you charge it(totally drained iteq x-bond battery), the phone will enter into pre-charge mode for about 30min to 2 hrs( depending on how drained the battery is), the end-call button together with the right double arrow button will light steadily. Do not on the unit as this will only aggrevate the problem. Wait until the phone passes through that pre-charge mode. When the end-call button starts to flash, that means the pre-charge period is over. You can now press and hold the on/off button for about 5 seconds and the phone will start-up normally. Your problem is solved. That's it. This procedure will work only on the presumption that you did not do anything on the phone beforehand such as upgrading etc....

Battery not charging after completely discharged

I am using a S3 HTC One S with stock 4.0.3 rom, rooted and unlocked bootloader. I was not carrying my charger with me and phone battery is finished to 0 and phone is closed. After I come home, I connect original charger to phone. Indication led is not flashing orange. I wait around half an hour. It does not flash now also. When I press power button around 7-8 seconds touch buttons blink 5-6 times and indication led begins flashing orange for 3-4 seconds and turns off. What should I do ?
Are you using CWM recovery? That's one fault with CWM, it will not charge the phone when off.
I am using TWRP. I entered recovery and reboot device from it. Problem solved but I still dont know problem.
rumnheim said:
I am using TWRP. I entered recovery and reboot device from it. Problem solved but I still dont know problem.
Click to expand...
Click to collapse
That's good to hear.
rumnheim said:
I am using TWRP. I entered recovery and reboot device from it. Problem solved but I still dont know problem.
Click to expand...
Click to collapse
how did you make it work? cuz i have the same problem... and since i cant charge it.. i dont think it has anymore battery left..
how do u go to recovery if you cant even open the damn phone?
Still orange led is not flashing, I kept my phone on charging. I pressed volume down and power buttons. It didnt open in first try. When I finally boot my phone normally it shows battery is 30%.

[Q] HTC ONE S not starting

Hi,
I have HTC ONE S. My phone is powered off, when I try to turn on nothing happens. When I press power button 10sec on my screen I see only flash 1sec and charging indicator flash ones and then turn off again
I put it on charger but battery charging indicator is not flashing
Please give me advice!!!
Thanks
Try to hold the power button(so 5minutes) to charge the battery because your battery is 0%(I propose)..
Then try to power on,if u don't succed,try again
Sent from my HTC One S using TrickDroid 3.0.0
beni8978 said:
Try to hold the power button(so 5minutes) to charge the battery because your battery is 0%(I propose)..
Then try to power on,if u don't succed,try again
Sent from my HTC One S using TrickDroid 3.0.0
Click to expand...
Click to collapse
thanks for your reply , but I still can't turn off my phone. I try with your advice.
Something that I forgot to mention is that yesterday I unlock my phone and then I install Clockworkmod (CWM) Recovery. At that time my phone battery was about 20-30% charged. And then I simply shut down my phone , until today , and now I cant turn on
I'm not finished with Step 3 from this tutorial http://forum.xda-developers.com/showthread.php?t=1583427
Now I have the same issues as described in this thread
http://forum.xda-developers.com/showthread.php?t=1843048
I try to clear cache using fastboot command but, windows didn't detect my phone
Please give me some help!!!!
Thanks
nikolaoh said:
thanks for your reply , but I still can't turn off my phone. I try with your advice.
Something that I forgot to mention is that yesterday I unlock my phone and then I install Clockworkmod (CWM) Recovery. At that time my phone battery was about 20-30% charged. And then I simply shut down my phone , until today , and now I cant turn on
I'm not finished with Step 3 from this tutorial http://forum.xda-developers.com/showthread.php?t=1583427
Now I have the same issues as described in this thread
http://forum.xda-developers.com/showthread.php?t=1843048
I try to clear cache using fastboot command but, windows didn't detect my phone
Please give me some help!!!!
Thanks
Click to expand...
Click to collapse
Are you using the official charger? Someone had issues with unofficial ones: when the phone was completely discharged, they couldn't power it up anymore. They solved the problem by using the official charger.

[Q] My HTC Sensetion died after unlock bootloader. Can someone help

Hi,
I unlocked bootloader and after reboot it hung. so I reset the phone by removing the buttery and after this I can't turn the device on anymore. Can someone help. To unlock the phone I used instruction from official site:
htcdev.com/bootloader/
My phone is: HTC Sensation.
Any help would be appreciated.
ilianato said:
Hi,
I unlocked bootloader and after reboot it hung. so I reset the phone by removing the buttery and after this I can't turn the device on anymore. Can someone help. To unlock the phone I used instruction from official site:
htcdev.com/bootloader/
My phone is: HTC Sensation.
Any help would be appreciated.
Click to expand...
Click to collapse
can you boot to the bootloader?
rzr86 said:
can you boot to the bootloader?
Click to expand...
Click to collapse
Thanks for your respond but I can't turn it on. I press POWER button hundred times, with combination of DOWN VOLUME button too but no way. I pulled out the battery several times and plug it in but still can't turn the phone. I tried adb command (while connected phone to the computer) but "device not found" error's thrown. Any ideas?
ilianato said:
Thanks for your respond but I can't turn it on. I press POWER button hundred times, with combination of DOWN VOLUME button too but no way. I pulled out the battery several times and plug it in but still can't turn the phone. I tried adb command (while connected phone to the computer) but "device not found" error's thrown. Any ideas?
Click to expand...
Click to collapse
remove battery,sim and sdcard
charge the device as it is for 4-5 hours
put them back and try to switch it on
rzr86 said:
remove battery,sim and sdcard
charge the device as it is for 4-5 hours
put them back and try to switch it on
Click to expand...
Click to collapse
When this happen the battery was almost full charged. Now when I'm plugging into charger the charging indicator (orange light) doesn't appear. Looks like the device is dead. Is there any trick to return it to the life?
ilianato said:
When this happen the battery was almost full charged. Now when I'm plugging into charger the charging indicator (orange light) doesn't appear. Looks like the device is dead. Is there any trick to return it to the life?
Click to expand...
Click to collapse
try that way and see if you have success
otherwise see this thread
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
try that way and see if you have success
otherwise see this thread
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
The method described didn't work. looks like it can't find the device
'cause after:
./brickdetect.sh
it reports:
Device can't be detected. Check connections.
ilianato said:
The method described didn't work. looks like it can't find the device
'cause after:
./brickdetect.sh
it reports:
Device can't be detected. Check connections.
Click to expand...
Click to collapse
try to turn on the device with a different battery
rzr86 said:
try to turn on the device with a different battery
Click to expand...
Click to collapse
I don't think that this is battery problem, 'cause when it happened it was fully charged, I also checked the voltage with multimeter and it issued 4v.
ilianato said:
I don't think that this is battery problem, 'cause when it happened it was fully charged, I also checked the voltage with multimeter and it issued 4v.
Click to expand...
Click to collapse
i am out of ideas mate except of removing them all and charge the device as it is for a few hours
put them back and see if you have success

Cannot Enter Bootloader or Use Volume Up.

Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Pra7ul said:
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Click to expand...
Click to collapse
adb reboot bootloader
waterdaan said:
adb reboot bootloader
Click to expand...
Click to collapse
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Pra7ul said:
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Click to expand...
Click to collapse
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
noahvt said:
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
Click to expand...
Click to collapse
Even If my volume button dosent work then why wont it enter bootloader via advance reboot it just restarts to system after selecting reboot to bootloader,so i should hard brick my device once again, P.S. i have done that twice before though.

Categories

Resources