Q&A for [RECOVERY][m8wlv] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][m8wlv] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
So after using Philz since I got my M8, I decided to switch to TWRP since obviously Philz isn't being developed any longer. I had zero problem flashing this through fastboot and have had no problems with it since doing so. But if I tried to flash it any other way using TWRP managher, or Flashify, or Nandroid Manager, it would work, but then it said it couldn't mount /system and the phone said there was no OS installed. Something wonky with the partition. Flashing back to Philz through fastboot solved this and I could reboot into my phone normally. And then flashing TWRP through fastboot instead worked fine. Weird.
I do not trust apps for flashing a recovery. Period. Any app.
And Flashify, TWRP Manager seem to be especially wonky on the M8....
Cant download
Just want clarify something. For some reason every time i download twrp recovery from their site, it always stops at 99%, and when i download it using my device it will finish downloading but it will have a different md5. Can someone enlighten me why that always happen?
daring0 said:
Just want clarify something. For some reason every time i download twrp recovery from their site, it always stops at 99%, and when i download it using my device it will finish downloading but it will have a different md5. Can someone enlighten me why that always happen?
Click to expand...
Click to collapse
With the new download server, this should no longer be an issue. Just make sure you navigate to the TWRP page and access the Primary Download link from there.
I flashed the new twrp 3.0 I keep getting failure to mount reserve. Any fix for this.
Droid0351 said:
I flashed the new twrp 3.0 I keep getting failure to mount reserve. Any fix for this.
Click to expand...
Click to collapse
Ignore it.
Related
[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16
Q&A for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
2.7 didn't work at all on sm-p905, 2.8 is just perfect!
Many thanks!
Hello, sorry for the stupid question, but I am just learning about all of this stuff
If I install the TWRP custom recovery on my P901 Note Pro 12.2, will I be able to go back to the stock recovery?
For example, will flashing the official stock firmware from SamMobile also cause the TWRP custom recovery to revert to stock recovery?
Many thanks in advance
indotoonster said:
Hello, sorry for the stupid question, but I am just learning about all of this stuff
If I install the TWRP custom recovery on my P901 Note Pro 12.2, will I be able to go back to the stock recovery?
For example, will flashing the official stock firmware from SamMobile also cause the TWRP custom recovery to revert to stock recovery?
Many thanks in advance
Click to expand...
Click to collapse
Yes, it will.
arcadia2uk said:
Yes, it will.
Click to expand...
Click to collapse
Ahh, thanks for the confirmation
Has there been any change in the cache partition formatting time between version 2.7.1.0 and the current version? AFAIK the make_ext4fs function takes some time to complete (more than 10 minutes).
Do I need to root before I put TWRP? or will TWRP add the root for me to flash othe rROMs ?
k000 said:
Do I need to root before I put TWRP? or will TWRP add the root for me to flash othe rROMs ?
Click to expand...
Click to collapse
You don't need root to flash TWRP! after flashing TWRP, you can install chainfire Supersu zip installer from TWRP to root the tablet!
twrp for sm-900. I don't happen to see this download there?
I am all rooted and it's great but I would like to install twrp on the SM-900. The thread title says it works on both CPUs but but when I flash the DL from the link proved it doesn't work. I also don't see a specific sm-900 file. Does the SM-900 actually accept TWRP atm? thank you.
This is for the SM-P900 Note Pro 12.2, SM-900 is the Note 3
thank u so much
twrp rocks
i use it for SM-P901
works great
TWRP 2.8.1.1 and encryption...
Just ran into a new (or at least, not yet reported in the p900 v1awifi thread) issue.
I encrypted my firmware (in this case, CyanogenMod 11). So far, life is good, right?
Except, all the way back to 2.7.0.0, TWRP doesn't prompt for a decrypt password before starting - so the interface is pretty, but not very useful... <grin>
I know that TWRP is capable of handling an encrypted device, any chance someone could "flip the switch" and turn on the feature?
Thanks!
Version 2.8.3
can you please post version 2.8.3 and whats new in this version ?
how to reboot into recovery mode directly from download mode to get into TWRP?
I am having trouble rebooting into recovery mode from download mode after installing TWRP via Odin on my note pro 12.2 P900. I was not getting access to TWRP after installing with auto reboot checked (twrp 2.8.3/odin 3.09/BNK1), so per prior posts in TWRP thread, i disabled auto reboot. Now however, i cannot get into recovery from download mode. The tablet stays in download mode...I hold the power button down to turn off, and it right away reboots the unit, it doesnt turn it off..ive also tried holding the recovery trigger buttons through the entire turn off/reboot process...goes to android.....Ive tripped Knox, get success/pass in Odin, seemingly just need to get to TWRP recovery right from download mode which i cant seem to do, other than maybe taking out the battery when done in download mode, then boot into recovery....
thanks,
Rich
dickybs said:
I am having trouble rebooting into recovery mode from download mode after installing TWRP via Odin on my note pro 12.2 P900. I was not getting access to TWRP after installing with auto reboot checked (twrp 2.8.3/odin 3.09/BNK1), so per prior posts in TWRP thread, i disabled auto reboot. Now however, i cannot get into recovery from download mode. The tablet stays in download mode...I hold the power button down to turn off, and it right away reboots the unit, it doesnt turn it off..ive also tried holding the recovery trigger buttons through the entire turn off/reboot process...goes to android.....Ive tripped Knox, get success/pass in Odin, seemingly just need to get to TWRP recovery right from download mode which i cant seem to do, other than maybe taking out the battery when done in download mode, then boot into recovery....
thanks,
Rich
Click to expand...
Click to collapse
In android, try adb reboot recovery
I have sm-p905v note pro 12.2 on Verizon. Can someone help with making one for it..
Sent from my HTC6525LVW using Xparent BlueTapatalk 2
Agree
blazinandroid1 said:
I have sm-p905v note pro 12.2 on Verizon. Can someone help with making one for it..
Sent from my HTC6525LVW using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
I have TWRP installed on a Galaxy Note 10.1, and I would like to install it on my 12.2. This is a P905V, and there does not seem to be any kind of recovery ROM for it. Can anyone suggest something that might work?
Cheers,
Russ
RussCannon said:
I have TWRP installed on a Galaxy Note 10.1, and I would like to install it on my 12.2. This is a P905V, and there does not seem to be any kind of recovery ROM for it. Can anyone suggest something that might work?
Cheers,
Russ
Click to expand...
Click to collapse
I would get with twrp ask them about. maybe they could help
.
it works on sm-p905f0(only for Korea)?? its cpu is qualcomm
dd command to install TWRP
I'm trying to install TWRP on a SM-P900 via a terminal with root access. The method listed on the TWRP download page will not work. I think it should be: dd if=/sdcard/openrecovery-twrp-2.8.5.0-v2wifixx.img of=dev/block/platform/dw_mmc.0/by-name/RECOVERY
Has anybody tried this successfully?
Q&A for [RECOVERY][TF700T] TWRP 2.8.3.0 touch recovery [2014-12-22]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][TF700T] TWRP 2.8.3.0 touch recovery [2014-12-22]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
where is the link?
1122qqww said:
where is the link?
Click to expand...
Click to collapse
Here: http://www.teamw.in/project/twrp2/105
I strongly recommend installation using the fastboot method, as the apps are reported to work poorly or not at all.
TWRP 2.8.5.0 Won't Boot
I just installed TWRP 2.8.5.0 on my TF700T via the fastboot method (since TWRP Manager fails to install it). However, when I attempt to boot the recovery, the device locks up. This is different behavior than 2.8.4.0, which had a kernel panic and rebooted the device. Any idea how to go about debugging, or should I simply try older recoveries / wait until a newer one comes out?
N1FFO said:
I just installed TWRP 2.8.5.0 on my TF700T via the fastboot method (since TWRP Manager fails to install it). However, when I attempt to boot the recovery, the device locks up. This is different behavior than 2.8.4.0, which had a kernel panic and rebooted the device. Any idea how to go about debugging, or should I simply try older recoveries / wait until a newer one comes out?
Click to expand...
Click to collapse
My self-built one works fine. Can anyone else reproduce this problem with TWRP 2.8.5?
_that said:
My self-built one works fine. Can anyone else reproduce this problem with TWRP 2.8.5?
Click to expand...
Click to collapse
Nope!
Just dd'd 2.8.5.0 onto tf700. Flashed and works tadellos.
Works Now
das chaos said:
Nope!
Just dd'd 2.8.5.0 onto tf700. Flashed and works tadellos.
Click to expand...
Click to collapse
Naturally, the dd method is the one method I didn't try. So I just did, and it works now. I did have to perform a normal reboot to complete the installation (as opposed to rebooting directly into recovery), but the instructions mentioned that (although they didn't specify that the reboot needed to be a normal one). So all is well now, and I can move on to installing ZOMBi-Pop, my main goal all along.
Makes me wonder why TWRP and fastboot failed, but oh well.
N1FFO said:
Makes me wonder why TWRP and fastboot failed, but oh well.
Click to expand...
Click to collapse
These methods also require reboot to system not to recovery.
das chaos said:
These methods also require reboot to system not to recovery.
Click to expand...
Click to collapse
I can believe that for fastboot, but TWRP Manager claimed that the flashing failed. On my OnePlus One, TWRP Manager flashed the recovery just fine. Is the claimed failure just a caveat of flashing on the TF700T, and the new recovery will actually work despite it if you perform a system reboot afterwards? I think I'll try that next when the next version comes out, just to see.
N1FFO said:
I can believe that for fastboot, but TWRP claimed that the flashing failed. On my OnePlus One, TWRP flashed the recovery just fine. Is the claimed failure just a caveat of flashing on the TF700T, and the new recovery will actually work despite it if you perform a system reboot afterwards? I think I'll try that next when the next version comes out, just to see.
Click to expand...
Click to collapse
Did you try to flash the twrp.blob in recovery?
That won't work unless you put the blob into a flashable zip.
Oh, re-reading your post you probably mean it failed in TWRP Manager. You take your chances with these apps. Don't use them...
berndblb said:
Did you try to flash the twrp.blob in recovery?
That won't work unless you put the blob into a flashable zip.
Oh, re-reading your post you probably mean it failed in TWRP Manager. You take your chances with these apps. Don't use them...
Click to expand...
Click to collapse
You're right, I meant TWRP Manager. Thanks for pointing that out, I edited the previous post to reflect that.
berndblb said:
Oh, re-reading your post you probably mean it failed in TWRP Manager. You take your chances with these apps. Don't use them...
Click to expand...
Click to collapse
That bricked my first tf300t!
Repeat:
Don't ever use TWRP Manager or Goo Manager for flashing recovery.
das chaos said:
That bricked my first tf300t!
Repeat:
Don't ever use TWRP Manager or Goo Manager for flashing recovery.
Click to expand...
Click to collapse
+1
add Flashify to the list. Or make that: apps in general
Fastboot or dd command is the way to go
Never mind, thanks
Never mind
Bgecko
USB OTG not working on htc one m7
USB keyboards not work on htc one m7 that support USB host mode via a USB OTG cable noooooooot work
openrecovery-twrp-2.8.5.0-m7.img
Can anyone turn this into a zip for me?
TLR - I think if I can get a zip of the latest TWRP I can get myself out of a nasty bootloop
I seem to have gone and bricked my Infinity while under the influence...
Installed new rom.
Decided to factory reset.
During format there was an error, and E: data no longer mountable (didn't realize this at the time)
Bootloop
Read some things online and thought maybe I didn't have the right TWRP
Installed a new recovery that was "compatible" with the rom I was installing
It was Philz cwm (freaked out)
Read a post that said I could force the tablet to re-format the :data partition from TWRP by using the terminal command "mke2fs -T ext4 /dev/block/mmcblk0p8" BUT can't run a terminal command from cwm
Can't find a way to enter fastboot to put twrp back onto transformer (No option for usb)
jbjcurly said:
Can't find a way to enter fastboot to put twrp back onto transformer (No option for usb)
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showthread.php?t=2688891
Problem solved!
_that said:
Read this:
http://forum.xda-developers.com/showthread.php?t=2688891
Click to expand...
Click to collapse
Thanks _that! I actually used a flashable version of your twrp recovery (2.6.3 maybe?) that I found, followed the plan I outlined above, and all is now well.
Where to get TWRP 2.8.6.0 for TF700T
Does anyone know where a TWRP 2.8.6.0 .img for the TF700T can be found? It's not available on the official website (actually, NOTHING for the TF700T is available on the offcial website).
Alternatively, does anyone know where a patched version of 2.8.50 that supports f2fs can be found? Or should I revert to 2.8.4.0?
Eh, maybe I'll just build 2.8.6.0 myself. How hard can it be?
Slightly harder than finding the Kang TWRP 2.8.6 by lj in the dev section I would think....
Q&A for Firmware-Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms_Updated_12_2_14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Firmware-Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms_Updated_12_2_14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
odd
first off what is; non-hlos
(explain in post 1 for new users also please)
Ok i tried to flash NKD on Cyanogenmod 11.0 build 121214 but it refuses to go.
running the latest teamwin recovery project twrp 2.8.3.0 klte
am i missing something?
Ok so i want to odin the new lolllipop im in nk4. But if i want to go back to nk4 i flash one these in odin? Than i can flash nk4 full tar in odin?
Anyone know of a zip to get back to kit Kat firmware? I used one to get to lollipop because my computer sucks and it's way easier. Not really sure why this method isn't used more.
jtadak said:
Anyone know of a zip to get back to kit Kat firmware? I used one to get to lollipop because my computer sucks and it's way easier. Not really sure why this method isn't used more.
Click to expand...
Click to collapse
Try this post
http://forum.xda-developers.com/sprint-galaxy-s5/development/stock-rom-ni3-kitkat-rom-t2886171
CAJUNMIKE said:
Try this post
http://forum.xda-developers.com/sprint-galaxy-s5/development/stock-rom-ni3-kitkat-rom-t2886171
Click to expand...
Click to collapse
Thank you but I'm looking for a zip to get to the nk4 bootloader.
jtadak said:
Thank you but I'm looking for a zip to get to the nk4 bootloader.
Click to expand...
Click to collapse
Right within the OP of that thread is
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
CAJUNMIKE said:
Right within the OP of that thread is
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
Click to expand...
Click to collapse
Wow! That's what I get for reading while at work. Thanks for not blowing up. Haha
G900PVPU2BOD3 added Factory Reset Protection
Bootloaders are locked to BOD3 after upgrading, meaning all the BOA6 stock images are now unusable. I've been stuck using the MOAR rom since the update came out and can't go back to stock, along with a ton of other people. Now I guess we wait for someone to post a BOD3 stock image.
Many aplogies for my ignorance but I am running out of ideas. I wanted to try out Cyanogenmod 12.1 so I flashed philztouch recovery using ODIN and installed the latest CM 12.1 zip from official cyanogenmod download. I did take a backup prior to flashing CM however now I am unable to restore from the backup, it says it is not valid (!!!???).
Can someone please tell me how to get the my sprint GS5 back to completely stock; I don't need root anymore or custom recovery or any of that, I just want it back to how it was when I opened the box. I have all my pics/messages backed up so I am not afraid to wipe it completely. If someone can point me to a file to download and flash in ODIN or whatever needs to be done I will do it. If you need any information from my phone I will gladly provide it.
Please help, thanks!
ej72 said:
Many aplogies for my ignorance but I am running out of ideas. I wanted to try out Cyanogenmod 12.1 so I flashed philztouch recovery using ODIN and installed the latest CM 12.1 zip from official cyanogenmod download. I did take a backup prior to flashing CM however now I am unable to restore from the backup, it says it is not valid (!!!???).
Can someone please tell me how to get the my sprint GS5 back to completely stock; I don't need root anymore or custom recovery or any of that, I just want it back to how it was when I opened the box. I have all my pics/messages backed up so I am not afraid to wipe it completely. If someone can point me to a file to download and flash in ODIN or whatever needs to be done I will do it. If you need any information from my phone I will gladly provide it.
Please help, thanks!
Click to expand...
Click to collapse
You will need one of the full factory tars available from the development thread.
And I've read somewhere that you may need to wipe internal storage coming from CM so backup what you want to save.
Just a warning, if you flash anything newer than OA6, you will not be able to flash back to older firmwares.
http://forum.xda-developers.com/sprint-galaxy-s5/development
tdunham said:
You will need one of the full factory tars available from the development thread.
And I've read somewhere that you may need to wipe internal storage coming from CM so backup what you want to save.
Just a warning, if you flash anything newer than OA6, you will not be able to flash back to older firmwares.
http://forum.xda-developers.com/sprint-galaxy-s5/development
Click to expand...
Click to collapse
I'm getting confused with the different requirements listed...kernels, bootloaders, etc. Can you point me to a specific post/file that I can flash in odin to get everything back to normal? Thank you.
Q&A for [RECOVERY][BUMPED][D850] TWRP 2.8.5.1 w/ F2FS [03/01]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][BUMPED][D850] TWRP 2.8.5.1 w/ F2FS [03/01]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
TWRP Recovery issue
Good day, I have an LG G3 D850 rooted on 5.0.1 OTA with stock recovery from unjustified dev root. I flashed twrp from the instructions here with flashify and later tried with rashr, I Also tried to install it through cmd adb on my pc. When I try to reboot to recovery (from rashr/flashify, and even manually) I get a boot certification error and then I guess a boot loop. The screen goes black and the led flashes red and blue. I have to take the battery out to restart. I must be doing something wrong. Any ideas?
Sandmann1381 said:
Good day, I have an LG G3 D850 rooted on 5.0.1 OTA with stock recovery from unjustified dev root. I flashed twrp from the instructions here with flashify and later tried with rashr, I Also tried to install it through cmd adb on my pc. When I try to reboot to recovery (from rashr/flashify, and even manually) I get a boot certification error and then I guess a boot loop. The screen goes black and the led flashes red and blue. I have to take the battery out to restart. I must be doing something wrong. Any ideas?
Click to expand...
Click to collapse
Did you resolve this issue? If so, how'd you do it. I'm having the same one.
No, But I believe they have a fix here where you would have to flash a kit kat bootloader. From what I read this, method works. I just feel more comfortable waiting for it to be done with all lollipop coding.
Sandmann1381 said:
No, But I believe they have a fix here where you would have to flash a kit kat bootloader. From what I read this, method works. I just feel more comfortable waiting for it to be done with all lollipop coding.
Click to expand...
Click to collapse
My thoughts precisely. Thanks for the quick response. Much appreciated.
Q&A for [RECOVERY] TWRP 2.6.3.0 touch recovery [2013-09-16]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP 2.6.3.0 touch recovery [2013-09-16]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I have N8020 version of note 10.1 and i don't know what is the correct TWRP file to download and install.
In download links there are many names, and none is for N8020.
Can anyone to point to exact download link?
Thanks in advance!
Edit: Solved with twrp manager from google play: the model is: p4noterf and the file is twrp-2.8.6.0-p4noterf.img.
I didn't test it because cwm already is installed.
Latest TWRP 2.8.x.0 is too big to fit recovery partition
It seems that latest TWRP 2.8.x.0 bigger then 8 MB and does not fit to recovery partition at least on mine n8000. It is possible to flash it and it does work, but next partition with MODEM get corrupted and SIM is not detected. If you flash modem phone functionality is back but as soon as you boot into recovery you get boot loop. Anyone to validate that? Does anyone have PIT for n8000 16GB with larger recovery partition?
---------- Post added at 10:26 AM ---------- Previous post was at 10:20 AM ----------
vladutgm said:
I have N8020 version of note 10.1 and i don't know what is the correct TWRP file to download and install.
In download links there are many names, and none is for N8020.
Can anyone to point to exact download link?
Thanks in advance!
Edit: Solved with twrp manager from google play: the model is: p4noterf and the file is twrp-2.8.6.0-p4noterf.img.
I didn't test it because cwm already is installed.
Click to expand...
Click to collapse
Before even thinking of flashing that recovery check the size of your recovery partition. Your modem is different to mine so I cannot say for sure but for me size is not sufficient and flashing results in corrupted MODEM and SIM unrecognized. And fixing modem makes recovery to go into permanent boot loop.
AndriiG said:
It seems that latest TWRP 2.8.x.0 bigger then 8 MB and does not fit to recovery partition at least on mine n8000. It is possible to flash it and it does work, but next partition with MODEM get corrupted and SIM is not detected. If you flash modem phone functionality is back but as soon as you boot into recovery you get boot loop. Anyone to validate that? Does anyone have PIT for n8000 16GB with larger recovery partition?
---------- Post added at 10:26 AM ---------- Previous post was at 10:20 AM ----------
Before even thinking of flashing that recovery check the size of your recovery partition. Your modem is different to mine so I cannot say for sure but for me size is not sufficient and flashing results in corrupted MODEM and SIM unrecognized. And fixing modem makes recovery to go into permanent boot loop.
Click to expand...
Click to collapse
Oops, just noticed the same problem here (n8016). Flashed 2.8.6.0 with TWRP Manager and was greeted with a bootloop. I was able to flash back to 2.8.5.0 in Odin and everything seems fine now, though (no modem/sim on this model, so I'm wondering what else got corrupted instead? Or if I just got lucky?). Guess I'll have to skip 2.8.6.0.
GranoblasticMan said:
Oops, just noticed the same problem here (n8016). Flashed 2.8.6.0 with TWRP Manager and was greeted with a bootloop. I was able to flash back to 2.8.5.0 in Odin and everything seems fine now, though (no modem/sim on this model, so I'm wondering what else got corrupted instead? Or if I just got lucky?). Guess I'll have to skip 2.8.6.0.
Click to expand...
Click to collapse
Same problem on the 8010, recovery partition size is too small, when you try to flash 2.8.6.0 from the recovery (2.8.5.0 via the flash img option) you get an equivalent error message, but at least you don't run into a bootloop.
If you have a look at all the released recoverys for the note 10.1 the size of the recoverys is growing with nearly every version, so it seems if there won't be a change none of the newer versions will work...