I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
Related
I have an AllWinner A10 based tablet that started working weird about a month ago - when the display was on there was no sound and to get the sound you had to turn off the display. I tried to fix it by flashing a custom ROM without understanding the process thoroughly. Long story short, I think I may have bricked it I believe the last thing I did was to install CWM-recovery-5.5.0.4.img through LiveSuit. Now I get only a blue Android logo at startup and nothing more. I have tried installing the stock ROM back but I always get this error in LiveSuit - ".PnpFelIn:invalid ID"
I am attaching a shot of the logo that comes up, hoping that some one will recognize what the logo means, and more importantly, if it's possible to recover my tablet from that point ?
Any pointers are very welcome at this stage.
Thanks
Hi
Any luck sorting this?
I have same error when using livesuit, and phoenixusbpro, ive got the natpc m009s with forgotten pincode, have got image file but can't install it, recovery mode just shows a dead android with red triangle,nothing else happens. Android Multi Tools v1.02b gsmforum gives an error of no files in the tablet so i can't use that either, tried .zip files on sd card too, nothing. tried 3 cables 2 computers with different operating systems.
Any help from anyone much appreciated.
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
hello everybody...
i have a (spanish jazztel) i-joy 10" tablet, cortex a7 quad core.
i made a mess with titanium backup and when tried to recover factory settings i realized that i had screwed the recovery data.
system would boot up, tablet would work but with many errors and "stopped working" pop ups.
i looked for a stock rom just to find out there is NONE in the WHOLE INTERNET!!!
then, googling here and there i read about some compatible roms, from allwinner, kalley and other chinese brands.
i downloaded all img files i could find, i flashed them correctly with phoenix usb pro, one after another.
first two worked well except for the cameras, that wouldnt work.
then i tried ICOU10GT firmware, flashed correctly...but touch DOES NOT work, i cannot go any further from welcome screen since the touch screen is not recognized.
i am 100% sure is not a hardware problem, all physical buttons work, screen works but not touch.
since i cannot reach the "enable usb debug mode" option i cannot flash any other img.
when entering recovery mode, if i choose update from adb the tablet is not fully recognized by windows (driver says device cannot start).
i´ve tried sd burning with phoenixcard but doesnt work either, tablet doesnt boot up from external sd card.
is there any way to recover this working-but-bricked tablet?
please help!!!
------------------
if there is not....is there a 100% safe and sure way to commit a "perfect murder" with the tablet to send it to post-service and being able to claim "it just stopped working" and them not being able to see i flashed it? i guess you know what i mean.
planetapluton said:
hello everybody...
i have a (spanish jazztel) i-joy 10" tablet, cortex a7 quad core.
i made a mess with titanium backup and when tried to recover factory settings i realized that i had screwed the recovery data.
system would boot up, tablet would work but with many errors and "stopped working" pop ups.
i looked for a stock rom just to find out there is NONE in the WHOLE INTERNET!!!
then, googling here and there i read about some compatible roms, from allwinner, kalley and other chinese brands.
i downloaded all img files i could find, i flashed them correctly with phoenix usb pro, one after another.
first two worked well except for the cameras, that wouldnt work.
then i tried ICOU10GT firmware, flashed correctly...but touch DOES NOT work, i cannot go any further from welcome screen since the touch screen is not recognized.
i am 100% sure is not a hardware problem, all physical buttons work, screen works but not touch.
since i cannot reach the "enable usb debug mode" option i cannot flash any other img.
when entering recovery mode, if i choose update from adb the tablet is not fully recognized by windows (driver says device cannot start).
i´ve tried sd burning with phoenixcard but doesnt work either, tablet doesnt boot up from external sd card.
is there any way to recover this working-but-bricked tablet?
please help!!!
------------------
if there is not....is there a 100% safe and sure way to commit a "perfect murder" with the tablet to send it to post-service and being able to claim "it just stopped working" and them not being able to see i flashed it? i guess you know what i mean.
Click to expand...
Click to collapse
In the edit comment you wrote "Last edited by planetapluton; 28th May 2015 at 07:44 AM. Reason: problem solved!" This thread will be closed.
If you have another issue with this device, please post in Android Q&A, Help & Troubleshooting
I have come into possession of a Polaroid P900 tablet which says it is Powered by Android, however, when turned on it never progresses past the boot screen. The model number on the back of the tablet is P900 and the build number is BN01.01.006.076.01.
The battery seems to charge fine and I can boot the tablet into recovery mode, in recovery mode the model number, or perhaps firmware revision number, is P900_20141216. I have tried the factory reset option to no avail.
The bizarre thing is I can't seem to find any information on this tablet online, apart from a copy of the really basic Quick Start Guide on the official website. There seem to be no firmware images or Android updates I could attempt to flash the tablet with to try to fix this boot issue.
Does anyone know of any resources I can use to fix this booting issue?
Alternately, if this is not an appropriate forum, does anyone know any other resources for hacking these tablets?
This is the first Android device ever in my possession so I am at a loss as to where to go or what to do at this point!
Thanks for any advice or suggestions you may be able to provide!
Hello,
Everyone is highly recommended to post their opinions and straight ideas on how can i fix my Alcatel alcatel one touch flash plus boot loop. It was originally a 4.4.4 kitkat by default and due to my curiosity to change my rom, I downloaded a customed rom lolipop 5.1.1 that i think might be compatible for my device but after installing the rom, I am now stock in boot loop. I have tried all the solution i knew from key combination power button plus up and power button plus down but unfortunately i cant access the recovery mode. The logo is blinking every 20 seconds. I also tried to connect it to my computer to install another rom but unfortunately my computer cannot recognize my phone. I already install the drivers necessary but i think the loop is the reason why my phone cant be detected. I have already search everything and every article point me to this site. According to my analysis, My phone is bricked!
The following are its conditions:
-Boot Loop every 20 seconds
-Cant access recovery mode by combination keys
-My PC cant recognize it when connected via its usb cable
-Sometimes when the logo disappears after 20 seconds, my pc suddenly beeps and its the signal for the recognition of the device but when the logo starts again, beep sounds again stating unrecognized device.
My Unit is Alcatel One Touch Flash Plus Display: 5.5" HD IPS capacitive touch screen
Operating System: Android 4.4 KitKat
Processor: Octa-core 1.5GHz
Memory (RAM l ROM): 2GB l 16GB
Can you help me.
Thank you!
Nordxxx said:
Hello,
Everyone is highly recommended to post their opinions and straight ideas on how can i fix my Alcatel alcatel one touch flash plus boot loop. It was originally a 4.4.4 kitkat by default and due to my curiosity to change my rom, I downloaded a customed rom lolipop 5.1.1 that i think might be compatible for my device but after installing the rom, I am now stock in boot loop. I have tried all the solution i knew from key combination power button plus up and power button plus down but unfortunately i cant access the recovery mode. The logo is blinking every 20 seconds. I also tried to connect it to my computer to install another rom but unfortunately my computer cannot recognize my phone. I already install the drivers necessary but i think the loop is the reason why my phone cant be detected. I have already search everything and every article point me to this site. According to my analysis, My phone is bricked!
The following are its conditions:
-Boot Loop every 20 seconds
-Cant access recovery mode by combination keys
-My PC cant recognize it when connected via its usb cable
-Sometimes when the logo disappears after 20 seconds, my pc suddenly beeps and its the signal for the recognition of the device but when the logo starts again, beep sounds again stating unrecognized device.
My Unit is Alcatel One Touch Flash Plus Display: 5.5" HD IPS capacitive touch screen
Operating System: Android 4.4 KitKat
Processor: Octa-core 1.5GHz
Memory (RAM l ROM): 2GB l 16GB
Can you help me.
Thank you!
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any information on your device only other Alcatel one touch models so I am pretty sure you have installed an incompatible rom. The only thing I can suggest is ask your question here
http://forum.xda-developers.com/android/help
Hopefully someone with your device can help
Good Luck
Sawdoctor