[Q&A] [RECOVERY][RootGuide][ALL NOTE 10.1]Official CWM Recovery Touch & Non-Touch 6.
Q&A for [RECOVERY][RootGuide][ALL NOTE 10.1]Official CWM Recovery Touch & Non-Touch 6.0.3.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][RootGuide][ALL NOTE 10.1]Official CWM Recovery Touch & Non-Touch 6.0.3.6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I am trying to get the cwm 6.0.3.6 version for my gt-n8013 so I can flash to kit kat but the links aren't working for me. Does anyone have any other links?
Doesn't work on my Note 10.1" N-8010 with Android 4.1 . Everything seems to work fine after installing CWM (green "PASS" message) but after restarting ODIN MODE is present instead of cwm. Tried in different usb ports both usb 2.0 and 3.0 and no luck.
6.0.4.3
Hi, please can you please update CWM for N8010 to 6.0.4.3? Verry thanks
Or please, how can i install .img via odin please?
Thanks and sorry for bad english
Delete please. Post was automatically put here as I'm to new to post in the Gnabo rom thread. Makes no sense here though.....
Great work! My N8010 is new again . I do miss the haptic feedback while typing, but the benefits of the update outweigh the minor loss. Everything else seems smooth so far. Was the loss of haptic feedback an issue with the software update, or is that just the way it works in this version?
Thanks again!
I've got a boot-loop problem...
Specs:
N8013 - WiFi only
It had CW Recovery Touch 6.0.3.6 installed, I don't remember which ROM it was running, but one day it went in to a boot loop, and I cant seem to get it out of the loop. I can't even seem to get it in to recovery anymore.
When I go to download mode, I can flash a new recovery, (ive tried several methods - this one being the latest I've tried: wiki.cyanogenmod.org/w/Install_CM_for_n8013)
When I reboot the device holding Pwr and Vol+, I see a clockworkmod recovery message at the bottom of the screen that says no file_contexts. (not a quote, as it flashes rather quickly, then reboots)
At this point, I am rather certain that i've bricked the thing...
I've tried numerous recovery images, and each time i try and boot recovery, regardless of whether or not it was CWM, the CWM logo and version 6.0.3.6 appears at the bottom of the screen, even when that is not what I just flashed.
Anyone have any ideas?
PhiLz Recovery v6.0.3.6 touch edition
hi, can anybody confirm this custom recovery working fine on
Samsung Galaxy Note N8020 ? Any bugs?
Sorry but I can't download from the links provided on the main thread
" [RootGuide][ALL NOTE 10.1]Official CWM Recovery Touch & Non-Touch 6.0.3.6 "
Same here- What Gives?
sweetja713 said:
I am trying to get the cwm 6.0.3.6 version for my gt-n8013 so I can flash to kit kat but the links aren't working for me. Does anyone have any other links?
Click to expand...
Click to collapse
--> Yeah, I'm having the same download issue. Can see the link, but when you click on it ... it spins and times out! Is there another method of downloading and getting this link or is there a bigger and better build available for the N8013N??
HELP!
Please tell me there is more explanation. I've spent two days trying to find a ROM to install to upgrade past 4.1.2. I have CWM 6.0.1.1 installed and its not working with OMNI or anything else. Please help those of us who spent $600 on a tablet 2 years ago and now can't use apps because Samsung are jerks. The download links you have here are taking me to spam pages. Also, the clockwork page downloads .img files , not .tar or md5. So HELP!!!! I have GT-n8013....
sweetja713 said:
I am trying to get the cwm 6.0.3.6 version for my gt-n8013 so I can flash to kit kat but the links aren't working for me. Does anyone have any other links?
Click to expand...
Click to collapse
Related
Hi,
I currently have ClockworkMod Recovery 6.0.2.3 installed and am using ROM Manager Premium 5.5.1.5 to attempt to install CyanogenMod.
I have the correct rom downloaded for the Verizon version, but every time I try to boot into the ClockworkMod recovery, the standard Android Recovery screen comes up instead.
I have followed about 3 different tutorials, and each ended in the same result.
Any idea what could be going on?
Thanks!
Sounds like user error. If you're rooted, you can use EZ Recovery from the play store to flash your recovery of choice.
Edgehood said:
Sounds like user error. If you're rooted, you can use EZ Recovery from the play store to flash your recovery of choice.
Click to expand...
Click to collapse
Thanks! That worked and got me into ClockworkMod Recovery. Now, the install of CyanogenMod failed. Now to figure out why that happened..
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thanks
FNM
CAKELIE said:
Thanks! That worked and got me into ClockworkMod Recovery. Now, the install of CyanogenMod failed. Now to figure out why that happened..
Click to expand...
Click to collapse
How did it fail?
Sent from my LG spectrum (that's right) blazing fast on cm10!
I am having almost the same problem. I rooted my phone using this:
<< 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT6 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop)
http://d-h.st/users/philz_touch/?fld_id=16061#files
taken from here: http://forum.xda-developers.com/showthread.php?p=31911620#post31911620
as it matches my phone make, build, kernel's date, model, etc. The trouble is when I go to recovery mode from ROM Manager it just stops on its way showing me this green little robot and a progress bar in the middle and it could stay like this for hours without moving anywhere. I have to press my power button and then it moves on and reboots into CWM. I have tried a whole lot of different rootings methods but ROM Manager v5.5.3.7 simply refuses to work with PHILZ-CWM6-DDLSC-ODD-5.06.1-SIGND.ZIP... I am completely lost...
Could anybody suggest / advise anything please? I would highly appreciate it Many thanks in advance!
I am on Android 4.1.2 Jelly Bean, Samsung Galaxy Note GT N7000, build number is JZ054K.N7000DDLSC, baseband version is N7000DDLS6, kernel version is 3.0.31 – 906407 March 6, 2013.
Hi Guys,
My device is Samsung Galaxy Tab 3 8.0 SM-T310.
I have installed CWM from the thread http://forum.xda-developers.com/showthread.php?t=2385539.
Very thanks for CWM creator. :good:
I installed this CWM with Odin version 3.07.
After installing, Odin has shown "Complete" and "Success" message.
and then I reboot my device and go to recovery mode.
But CWM can't show and only stock recovery is shown.
Please help me and point me what is necessary things to install CWM.:crying::crying:
Thanks
SaiThet said:
My device is Samsung Galaxy Tab 3 8.0 SM-T310.
I have installed CWM from the thread http://forum.xda-developers.com/showthread.php?t=2385539.
...
But CWM can't show and only stock recovery is shown.
Click to expand...
Click to collapse
Hi everyone.
I have the same problem!
I always used odin to flash all of my samsung devices; and i tryed the TWRP, the CWM touch and no-touch, but have the same issue. The stock recovery always shown!
Can someone help us please ? Thank a lot
(Sorry for my poor english - French user :cyclops: )
Same here...
I am sorry to say that there is no absoulute confirmed version of CW or CWM for the T310
I for once would wish we'd have this update come, I want ro change my boot animation.
PS Rom Manager by CWM in Playstore, wont work since CWM is not in the T310
Did you tried again?
Same issues for me too on the T310
I also just bought a Galaxy Tab 3 8.0 tonight (T310). Running 4.2.2. CWM r#4 wouldn't load the SD card to allow me to load the root tarball. It also still had the display issues. Then, I loaded TRWP, which worked and allowed for root access, but pretty much nothing else.
I thought I might try CWM one more time before I leave for 10 days, but it looks like I am stuck with TWRP right now. Too bad too, since I wanted to install the unofficial CM version (but I think CM requires CWM), or at least just a stock rom. This Samsung loaded garbage they call a ROM is messy and slow, it annoys me.
Thanks to the all the developers who put so much into these projects.
Hello, I'm using T-Mobile (UK) HTC One SV with JB (rooted)
I follows this link to root my phone and thus I've got the JB CWM version listed in the link.
The problem is when I boot into recovery mode into the CWM, the screen is shifted a bit to left and the cropped/shifted part is appearing on the right! (I hope I'm making some sense with this 'shifted screen' explanation. I'd like to post a screenshot if someone can help me with getting a screenshot in recoverymode) Anybody else facing this problem? If yes, how can I fix it?
On a slightly different note, I'd like to admit that whilst following the rooting procedure mentioned above, I tried to be a 'smart arse' and tried flashing CWM 6.0.3.8 on the device, which just wouldn't load /data with error
Code:
Can't mount /data
and same with cache and respective logs. And because of that I wasn't able to do a backup either. I tried, quite a few times, to format the SD card into FAT32 etc but it was having none of it! :crying:. Then when I slapped myself for not following the procedure, like a good boy , and got the same CWM listed in the link, I was able to do backup and no errors were being displayed in regards to mounting of /data. :good: I thought I'd share my experience on for others to learn from.
This screen flickering is a know problem of this touch recovery.
Its not developed to the end.
I recommend you to use TWRP recovery which is fully functional.
old.splatterhand said:
This screen flickering is a know problem of this touch recovery.
Its not developed to the end.
I recommend you to use TWRP recovery which is fully functional.
Click to expand...
Click to collapse
Thanks for quick reply. I've never used TWRP and to be honest, quite new to this depth of rooting, recovery etc. Does TWRP offer similar set of features as CWM? And is there a 'touch' TWRP for this device on JB? If so, could you kindly post me the link.
Most up to date version you will find here:
[TWRP 2.6] Updated 9/21/13 All variants TWRP recovery 2.6
Another (older):
[Recovery] TWRP Recovery 2.x
Yes, all touch and has more features than cwm.
old.splatterhand said:
Most up to date version you will find here:
[TWRP 2.6] Updated 9/21/13 All variants TWRP recovery 2.6
Another (older):
[Recovery] TWRP Recovery 2.x
Yes, all touch and has more features than cwm.
Click to expand...
Click to collapse
Thanks a lot! I shall give it a try
Q&A for [RECOVERY][d2vzw] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][d2vzw] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Cant get back to TWRP after flashing COS12
Cant get back to TWRP after flashing COS12....boot loader unlocked...flashed COS12 via CMR.
I have lot tried to flash TWRP img. but failed. previously i have flashed TWRP severely and rooted my device. but now after flashing COS12 through CMR i am unable to flash TWRP 2.8.6.0. and unable to root my device. Please help!
cheguaravind said:
Cant get back to TWRP after flashing COS12....boot loader unlocked...flashed COS12 via CMR.
I have lot tried to flash TWRP img. but failed. previously i have flashed TWRP severely and rooted my device. but now after flashing COS12 through CMR i am unable to flash TWRP 2.8.6.0. and unable to root my device. Please help!
Click to expand...
Click to collapse
What version of Android are you on? Twrp should flash with no issues (most of the time anyways)
Sent from my Nexus 5
TWRP 2.8.6.0 not mounting anything
Hello. I'm new to xda so sorry if I'm posting this in the wrong area but I have flashed the newer versions of twrp several times and each time I reboot into recovery it will not detect any partitions. It will not even let me look at my SD card files. I have tried several versions of twrp and nothing has worked. It wouldn't be a big deal except that I don't care for the CWM backup system and much prefer TWRPs. I am using invisibleks cm 12.1 ROM and am not using any custom kernel. Thanks in advance!
Q&A for [RECOVERY] TWRP 2.8.2.0 Unofficial
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP 2.8.2.0 Unofficial. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
ailima said:
I have this issue as well. 64gb/ntfs
Click to expand...
Click to collapse
I use Online Nandroid Backup and Nandroid Manager. It's a good workaround for now until the SD read issue is fixed for TWRP access. Here are the links. Remove if not allowed. https://play.google.com/store/apps/details?id=com.h3r3t1c.bkrestore&hl=en https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup&hl=en
use Flashify for flashing recovery, and no problem with adb.
TWRP 2.8.7.0 Shield Tablet Bug
Hi there,
unfortunately i found out that flashing the new TWRP to my shield tablet was a fail.
Sometimes i need to clear my dalvik/cache partitions. If i do that withing the new TWRP and want to reboot into system, the nvidia bootlogo shows up for about a seconds
and then then screen stays black.
Nothing of the reset options nor does a factory reset inside twrp help, i have to re-flash my (stock) rom again via fastboot. Then everything works fine again...
Edit: did it three times now to be sure its something wrong with TWRP when cleaning up dalvik/cache partitions. Will check if this happens with CWM too...
Also used two different rom versions from nvidia website 2.2.1 and 2.2.2.
It seems hard to get into any custom recovery, not just TW. My current workaround is to:
Code:
adb reboot bootloader
fastboot boot recovery.img
It almost looks like custom recoveries don't get loaded when requested.
Hello guys. I flashed twrp 2.8.7.1, then used it to flash CM Kitkat (10 or 11, i cant remember). But now i occasionally will lose touch screen function. I dont know what is the cause, twrp or CM, or another thing maybe? Anyone have any idea to my issue?
Thanks in advance.