[Completed] [Q]Help i have a big problem in alcatel scribe hd - XDA Assist

Hi every body
I'm have a really huge prob for me , i flashed a wrong rom in my phone and after that my phone stuck @ logo of this rom and no and can't go inside the recovery mode and i'm tried a most solutions 4 that and nothing go well and the adb get me a this message "- exec '/system/bin/sh' failed: No such file or directory (2) nRet(-1) -" when write this command "adb shell" , i want to get my phone alive again
can any body help me please????

Hi,
The closest thread I can find to your issue is here,
http://forum.xda-developers.com/showthread.php?t=2649814&page=3
You could ask for ideas there. Unfortunately flashing roms not made for our devices can often permanently brick our devices. You may need to try a repair center.
You can ask for help here too, if the above thread doesn't help...
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

Related

[Completed] Mercury mTab MagiQ not been able to boot

Hello Developers,
I did mess with my android phone Mercury mTab MagiQ & need your kind attention and help here.
What I did first is:
1. rooted my phone with Root Genius;
2. thereafter, I copied the GApps to /system/app;
3. then I unrooted the device with root genius
4. then I did the factory setup &
5. finally, I tried rebooting my phone
huh... its not allowing me to rebooting again as all the time, few messages popping up that are not allowing me to go off the Welcome screen. Messages that are coming time & again are:
1. Unfortunately, Google Account Manager has stopped.
2. Unfortunately, the process.com.google.process.gapps has stopped.
I tried doing the factory setup by pressing Vol+ Start+ Home button & rebooted but the same problem.
Don't know what to do... kindly suggest the way out.
Hello there,
Since we do not have forum for your specific device, can you please post in
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
And the right experts may be help you with the correct answers.
PS: BTW, i am pretty sure you must flash stock ROM but its just a guess.
Here another thread about: Stock ROM for Mercury Mtab MagiQ 5 inch Phablet. Please Help!
Good luck

[Completed] [Q] [Phone bricked] Samsung Galaxy Discover

Hi, i bricked my phone.... I tried many solutions, but nothing worked!
I think i corupted the build.prop file... I have no backup. When i boot my phone: The screen is black for 3 seconds. After, i see the samsung boot logo, and then the boot animation. And after i see the animation but the boot sound cut at 2/3. And my phone show back the samsung boot logo forever.
Adb to reset the build.prop file: Permissions issue
One click: Not work
Android system recovery: the wipe data do nothing
Fastboot: I think i did'nt have that
Cyanogen ROM: Not compatible
If you need more specs, i will tell you!:good:
(I am french so that why my english is ugly)
Hi,
Unfortunately there's no device section for your device, so asking for help here is your best bet...
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.

[Completed] [Q] My phone not rebooting after cwm installation please help

After installation cwm in my karbonn titanium octane plus i tried hard to reboot it please help me to rooboot it. Even i cant open the recovery mode after this.when i try to reflash the cwm it gives error DRAM failed
Hi,
I hope you flashed a CWM made for your exact device make and model number.... Flashing anything not made for your exact device make and model number can lead to serious trouble sometimes.
Here is a root thread for your device which mentions CWM, you can try asking for help from here,
http://forum.xda-developers.com/general/help/root-karbonn-titanium-octane-plus-t2816066
Otherwise you need to ask for help in the same section we showed you in your last Assist thread.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

[Completed] Broken fastboot & recovery

Hello there,
I'm new here but I really need help with my phone, I broke the recovery by flashing the wrong version of the recovery, and I did the big mistake of rebooting before flashing a good version on top of it.
Now I can't access either fastboot or recovery, and the flash_image program that can be used by adb does not work and tells me that there was an error searching partitions...
I can boot in the installed rom just fine, so if adb is needed I can use it, but I don't have anything else than that. The phone is a Huawei G510-0100 (u8951)
I don't know what to do anymore...
EDIT: after using the application ROM Installer from here: http://forum.xda-developers.com/showthread.php?t=2480034 I was able to get a usable recovery but with corrupted screen and in that recovery I flashed the right version so everything is back to order.
Hi,
This is all I could find.... There's really no feedback on the thread, so flash anything at your own risk as always...
> General discussion > Upgrading, Modifying and Unlocking > reverting your huawei g510-200 back to factory stock
If you need help, you can try asking in that thread.... Otherwise for this or any other questions, you will need to ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Dead tablet

Hello
I have a problem with my tablet.
I instaled an app to change the screen resolution and now it wont boot up, it gets stuck ond the boot screen (not the one that says android, the one before with the brand name).
I searched everywere for a solution and roms but i dont find any for this model.
Its a Lazer MID7317CP, it doesnt have cwm but i can enter the recovery menu.
The only info i know about hardware is that it has this board 7500-M7317M-00R and cpu AML8726-MXS
Any help is apreciated
Thanks
UPDATE
I´ve made some research and i´ve found that i have to change the build.prop file but how do i do that?
I´ve read in another thread that i can do it through the android commander but it says that i have to boot in cmw and i dont have it installed :/
I've seen something about adb and i´ve followed a tutorial but it gives me an error on cmd when i type adb shell (error: closed), i think it´s because of the driver. It says that this is a nexus tablet but it isn´t and i can´t find the correct driver :S
Any help?
Thanks
Hi there,
I'm sorry but I don't find anything related to your device, so you must start asking in one of this Q&A forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
or
> General discussion > Questions and Answers
Sorry for this late response.
Good luck

Categories

Resources