Hi!
Xperia MiniPro (PowerAmp) I used so far with AGK headphones. It sounds so loud and clear.
Now, my new Xperia L is inaudible and i cant heat that powerfull bass.
(With the same app and headphones.) I tried the same options, and tried to boost in equalizer but still crap.
Any solution to make it more loud and clear bass?
Only solution is to get a pair of headphones that are more sensitive. Xperia L has much worse built in amplifier that MiniPro had. I experienced same issue with my old headphones and solution was to get new ones with at least 106db sensitivity.
You could try that amp boost in PowerAmp but it kills dynamic and makes sound flat and dull.
Viper4Android Bro You can make the headphones, loudspeaker and bluetooth device sound a 6 db louder or if you install both Viper4Android and Viper4Android XHiFi you can make headphones 12 db louder (In my case I only have 6 db louder as I set a eq to be more bass than everything and by making + 12 db theres to much bass and headphones ale quieter than before). But give it a try. btw. this need root.
damian01211 said:
Viper4Android Bro You can make the headphones, loudspeaker and bluetooth device sound a 6 db louder or if you install both Viper4Android and Viper4Android XHiFi you can make headphones 12 db louder (In my case I only have 6 db louder as I set a eq to be more bass than everything and by making + 12 db theres to much bass and headphones ale quieter than before). But give it a try. btw. this need root.
Click to expand...
Click to collapse
PowerAmp app that OP is using has built in software amplication but just like every software solution that exists it kills dynamic and sound quality.
CLICK THIS TEXT TO BE DIRECTED TO THE LOLLIPOP THREAD
I would appreciate a small Donation, u can but u dont need to its up to you if u want thanks to all who are supporting me since Z1 generation
CAUTION!
]FIRST OF ALL DO BACKUP PLS, TO AVOID ANY SPAM LIKE HOW CAN I REVERT BACK,
IM NOT RESPONSIBLE FOR ANY DAMAGES WITH YOUR PHONE LIKE BROKEN EARPIECE ETC
JUST FOR INFORMATION I CANT DO SEPARATE ZIP FILES FOR EACH ONE, SPECIALLY MONO ZIPS I WILL NOT DO ANYMORE, SO PLS DONT ASK THAT THE HEADPHONES ARE TOO LOUD OR DISORT.
IM AN AUDIOPHILE SO I KNOW THE LIMIT WHAT DISORT OR NOT, I WILL KEEP THE HEADPHONE SETTINGS LIKE THIS.
Enjoy
I was able to activate Earpiece aswell while playing Music and I can hear the Difference so good and it is the most Genius thing I found for this Device.
Everyone dreamed to have Stereo Sound on this Phone like Xperia Z2
Now the Z1 Specifications are quite similar to the Z2 expect few Things
Click to expand...
Click to collapse
OLD
UPDATE v7 Pure Stereo
V7
Mirror
1. V7
2. V7
UPDATE v7.5 Pure Stereo
V7.5
Mirror
1. V7.5
2. V7.5
UPDATE v8 Bugfix Pure Stereo
V8
Mirror
1. V8
UPDATE v9 Pure Stereo
V9
Mirror
1. V9
UPDATE v10 Pure Stereo
V10
Mirror
1. V10
UPDATE v11 Pure Stereo
V11
Mirror
1. V11
UPDATE v12 Pure Stereo
V12
Mirror
1. V12
UPDATE v13 Super Stereo Mod
V13
Mirror
1. V13
2. V13
UPDATE v14 Super Clear Stereo Mod
STOCK ROM
STOCK v14
CM11 ROM
CM11 v14
Mirror
STOCK. STOCK v14
CM11. CM11 v14
Click to expand...
Click to collapse
New
HUGE UPDATE v15 Super Clear Stereo Mod
STOCK ROM
STOCK v15
Mirror
1. STOCK v15
Click to expand...
Click to collapse
STOCK files Stereo
STOCK STEREO
Mirror
STOCK STEREO
STOCK files Mono
STOCK MONO
Mirror
STOCK MONO
Click to expand...
Click to collapse
v1 Cyanogenmod
For Cyanogenmod install this Thanks to
Chocolatetrain
Follow Link
Click to expand...
Click to collapse
Changelog
v1.0
-bass active
-StereoSound active
-Headphones Volume boost
-loudspeaker Volume boost
-Microphone sensitivity boost
-Earpiece Volume call boost
v2.0
-Turned bass off (for louder Volume and less crackling
-fixed microphone and reduce sensitivity of microphone bit
-fixed microphone camcorder
-Reduce earpiece call volume for less echo or maybe not echo? Tell me
Increased the dual stereospeakers Volume bit
v3.0
-Add new speaker_cal.acdb From LG g3 (more clear sound)
- add bit more bass (not really noticeable
-Reduce volume bit (less cracking)
-Mixerpath.xml From Dreamingonmusic v8.5 just flash over nothing will happen
-Reduce microphone gain( no more echos)
-new Files
v3.5
-Added Bass (no conflicts with microphone)
-XLOUD and ClearPhase not able to deactivate (activated automatically) it's a bug
-Lowered volume reduces crackling (follow my eq settings in OP down
v4.0
-Removed bass (because of some issues
-Added Xperia T /Z2 and Galaxy Note III soundfiles edited by me
-Added more Mid-Trebble (producing more bass than the stock Rom and less than v3.5)
-XLOUD and ClearPhase work Again (but ClearPhase Have a bug I think don't sound clear as it should)
-Lowered volume (Eliminated crackling sound now
-Raised earpiece incall Volume
-Raised Mic gain little bit more
-Added Xperia Z2 headphone files (adds more bass and more clarity and much louder it can go to 91 without distort instead of 89)
v5.0
-Added whole SONY XPERIA z2 Audio System
-Fixed ClearPhase Sound bug
-Fixed incall headphone volume balance
-Lowered incall Speaker (maybe no more echos)
-Higher Volume (Stereo Speakers)
-Xperia Z2 Headphone configs
-Xperia Z2 Speaker Configs
-Added bass (start from 40hz)
-no more crackling so far, (depends on songs)
-Pushed incall equalizer volume Up
v5.5
-Reduced microphone gain to 14 (stock 12)
-Reduced bit volume
-Added SAMPLERATE 192_KHZ
v6
-Fixed Mic
-New Z3 Files
-Z3 DSEE - HX
-Z3 ACDB Files
-Improved Headphones alot (added much more bass)
-Fixed Crackling
-High Volume
-Bit more Bass
-More Clear Sound
-2 versions mono and stereo
-Updated Mixer_paths.xml
-And more
v7
-Updated Mixer_paths.xml
-Improved Earpiece Sound
-Added Megabass (Old Sony Devices)
-Updated Many Files
-Revert back to Stock Sony Speaker_cal.acdb due to some issues with distort in some Songs
-Impressive Loud Volume
-Hopefully fixed echo
-Fixed headset incall volume
v7.5
-Added Volume in Voice From Z3 (Deeper)
-Added bass (disable XLOUD and adjust Clearbass if u want to have bass but keep in mind volume is low)
-Improved Earpiece volume
-Hopefully fixed echo call (for your information I don't have any echo,)
-Xperia Z3 Speaker Calibration
-Added Dolby_mobile Virtual from LG G3 (my dad's phone) ?
v8 Bugfix
- Added SRS TruMedia
- fixed crackling on speaker
- more clear sound
- tuned microphone
v9
- Added Xperia Z2 Libs
- Added Bass And volume in voice
- more clear sound
- tuned microphone again
- Updated Mixer_paths.xml
- Added E1 speaker optimisation along with Z3 files
- Rework Megabass and dolby_mobile
v10
- Combined Xperia Z1/Z2/Z3 and Z Ultra Libs
-Z Ultra Speaker Optimisation (bass start 90hz compared to stock Z1 115hz)
- Added Bass, Volume and clarity in voice
- more clear sound
- tuned microphone and increase earpiece incall (no more Echos anymore for sure)
- Updated Mixer_paths.xml to Z3
- Improved Soundenhancment quality
- Improved the Stereo Output
- LOUDER VOLUME
- alot of more Z3 Files in forgot :/ Enjoy
v11
- replaced Z Ultra Speaker Optimisation with Z1c now bass start at 50hz Instead of 90hz
- Added more Bass, Volume and clarity in voice
- fixed no microphone and decrease bit earpiece incall (no more Echos anymore for sure)
- Reverted Mixer_paths.xml to Z1 due to issues
- Improved the Stereo Output
v12
- Made Speakers more equal loud
- Fixed microphone problem now completely
- Stereo incall loudspeaker
- updated Mixer_paths.xml
- Improved the Stereo Output
-lowered the speakers volume bit top reduce noise
v13
- Speakers Finally equal Loud and Balanced
- Retuned Mixerpath.xml
- Improved the Stereo Output
- tuned dB of Earpiece and Push Force (it's safe don't worry it will be not damaged)
v14
- Added CM11 version
- Speakers are Clear And Normal LOUD
- Retuned Mixerpath.xml
- Improved the Stereo Output
- tuned dB of Earpiece to maximum (6dB) so no Noise of Earpiece anymore and double Push Force to earpiece output
- Double Push Force for Loudspeaker and Clear Sound output
- Viper4android bug Fixed
Click to expand...
Click to collapse
New
v15
- Speakers are totally equal now
- Retuned Mixerpath.xml
- Improved the Stereo Output
- Triple Push Force to earpiece
- Double Push Force for Loudspeaker and Clear Sound output
- Viper4android bug NOW hopefully Fixed
- Based on latest v11Z Sonico
Click to expand...
Click to collapse
-Tell me more I forgot
Click to expand...
Click to collapse
EQ Settings
My equalizer settings for v4.0
Left to right
+6
+0
+4
+7
+10
Clearbass +10
Click to expand...
Click to collapse
My equalizer settings for v3.5 and v6.0 and v8.0
Left to right
+3
+2
+4
+7
+10
Clearbass +10
Click to expand...
Click to collapse
My equalizer settings for v7.5
Left to right
+0
-2
+3
+6
+10
Clearbass +10
Click to expand...
Click to collapse
My equalizer settings for v9.0 and v10.0 and v11.0 and v12.0
Left to right
+10
-3
+2
+6
+10
Clearbass +10
Click to expand...
Click to collapse
My equalizer settings for v13.0, v14.0 and 15.0
Left to right
+2
-3
+2
+6
+10
Clearbass +10
Click to expand...
Click to collapse
Better Use Without Viper4android (This Mod is already Perfect) personally I Don't use.
Credits to
@monivan
@mffu
@JimRnor
@Chocolatetrain
@Ohle76
@shiro321
@sinosuke
@xxx_sunnyboy_xxx
Click to expand...
Click to collapse
PS: Sorry if the Whole Thread look Ugly I wrote all these stuff with my Phone and edited all my files with my phone as much possible as I could now enjoy
I would appreciate a small Donation, u can but u dont need to its up to you if u want thanks to all who are supporting me since Z1 generation
Sent from my C6903 using XDA Premium 4 mobile app
Just flashed it and it works on z1c sound hears from main speaker abd from head speaker so works like should!
mosespl said:
Just flashed it and it works on z1c sound hears from main speaker abd from head speaker so works like should!
Click to expand...
Click to collapse
Thanks
Sent from my C6903 using XDA Premium 4 mobile app
Thread UPDATE And Stock Mixerpath.xml
So For everyOne who have sound mod add these lines
other without any mod flash like this normally
Both .757 and .108 also works? and for speaker only I think?
TheEndHK said:
Both .757 and .108 also works? and for speaker only I think?
Click to expand...
Click to collapse
Yeah work with every kit Kat stock based room
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Yeah work with every kit Kat stock based room
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok I'm going to try it now, will report later.
thanks for the mod , but I can't tell if its working coz main speaker's volume is (a lot) higher than the head one, if I hide it with my finger I still can hear something but even here I can't tell if sound is coming from head speaker lol
I noticed that when i set volume to max(i dont have enchaned boost) head speaker little "hrhrhr" with stock xperia ringtone for example. I need to vol- 2 steps and everything is great
sheraro said:
thanks for the mod , but I can't tell if its working coz main speaker's volume is (a lot) higher than the head one, if I hide it with my finger I still can hear something but even here I can't tell if sound is coming from head speaker lol
Click to expand...
Click to collapse
mosespl said:
I noticed that when i set volume to max(i dont have enchaned boost) head speaker little "hrhrhr" with stock xperia ringtone for example. I need to vol- 2 steps and everything is great
Click to expand...
Click to collapse
Thread updated buddies real stereo so both only produce one channel
Earpiece right
Loudspeaker left
Flash and tell me.if it works
https://www.dropbox.com/s/34gd06vsqr1ajdr/RealSUPPER_Bass_StereoMOD.zip
Sent from my C6903 using XDA Premium 4 mobile app
After flash android.com.proces.stopped need to restart recovery and wipe cache and dalvik after reboot there is no sign but i cant check right now if speakers works because my girlfriend is sleeping near me in bed
Edit:
Checked while ago and both speakers works but i'v done this on min lvl of volume
mosespl said:
After flash android.com.proces.stopped need to restart recovery and wipe cache and dalvik after reboot there is no sign but i cant check right now if speakers works because my girlfriend is sleeping near me in bed
Edit:
Checked while ago and both speakers works but i'v done this on min lvl of volume
Click to expand...
Click to collapse
Ah okay so.it works jah?
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Ah okay so.it works jah?
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Jah
I modified my mixer_paths.xml with your changes and it works!
The only thing that is different for me is that the earpiece is left and loudspeaker is right. But I like it more that way.
einfachgaer said:
I modified my mixer_paths.xml with your changes and it works!
The only thing that is different for me is that the earpiece is left and loudspeaker is right. But I like it more that way.
Click to expand...
Click to collapse
Haha jah I was confused u are right with earpiece left and loudspeaker right,
Enjoy
Sent from my C6903 using XDA Premium 4 mobile app
Nice work @dontbelive !! At first I didn't notice a difference but then I compared before and after and It definitely improves the sound. :highfive:
Iv tested today sound with this mod and i can say that on full vol headspekaer starts to shutter and max lvl of volume is 2 steps under max. Can anyone test on max volume? Quality of sound is little poor because of this.
dontbelive said:
Thread updated buddies real stereo so both only produce one channel
Earpiece right
Loudspeaker left
Flash and tell me.if it works
https://www.dropbox.com/s/34gd06vsqr1ajdr/RealSUPPER_Bass_StereoMOD.zip
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried both old and new ver on .108 and all works. The new one does produce true stereo and hence, offered better audio quality. However, the new ver got some sound crack out from the top speaker(old ver no cracking), it is easy to test it out I'm using the ringtone of Xperia. This music is easy to hear the sound crack when you turn the volume to the largest.
I think in the next ver you have to cut the high freq. or bass sound(I've no idea the problem comes from high area or low area) from the top speaker to prevent the sound cracking because the top speaker in Z1c is so small and can't handle it.
TheEndHK said:
I've tried both old and new ver on .108 and all works. The new one does produce true stereo and hence, offered better audio quality. However, the new ver got some sound crack out from the top speaker(old ver no cracking), it is easy to test it out I'm using the ringtone of Xperia. This music is easy to hear the sound crack when you turn the volume to the largest.
I think in the next ver you have to cut the high freq. or bass sound(I've no idea the problem comes from high area or low area) from the top speaker to prevent the sound cracking because the top speaker in Z1c is so small and can't handle it.
Click to expand...
Click to collapse
It is bcuz of low area frequency so when I turn off bass it will reduce quality qnd will sound normal do I will try to do something
So use the Walkman soundenhancement and reduce the 400hz slider to -2 and see what will happen.. as I said I'm not professional in such modding but I love to do and find new things so keep calm I will try some moddings with it, if I would know how to set the earpiece equalizer separate then it would be so much better for sure and reduce bass with mixerpath.xml, it is connected with multimedia lines in the file I think but not sure
Sent from my C6903 using XDA Premium 4 mobile app
Strange,it works and then it just stops the song,no matter what player i tried it just stop's the sound after few seconds
i"am on kitslim latest rom by amg
Hi, I have a question about the ClearAudio+ setting on the Z3.
I like to have this setting on for the speaker (increased volume mainly + surround), but I don't really like the effect it has on listening to music with headphones.
Is there any way to make this mode only apply for the speakers?
I'd like to not have to change the setting every time I switch between headphone/speaker.
I have S-Force Surround for the speakers but the it's too quiet
i wish to know the same...
I have this great Mod installed on my Nexus 5 that basically enables surround sound and combines the two speakers together. It's just phenomenal. Is it possible to bring this same effect on this device? I saw that there are multiple mixer_paths.xml files inside the etc folder.
Then use my mod I have working xLOUD S-Force surround and ClearPhase on my M2 with viper audio aswell.
https://youtu.be/fB5U5pkk05I
D2303 18.6.A.0.182 5.1 deodexed z2 port+z5 apps,be2,xr,sv,ad,nuts t2u dual recovery,xposed,S-Force,xLOUD,z5 cam2±libs,seeder, +more....
That's just an effect applied to the main speaker.
That's as good as it gets the earpiece speaker is to small to take it working in full stereo mode like z3/m4a it wouldn't last a week the sound does come out of the earpiece I checked, it doubles the output of sound compared to stock, all the correct S-Force surround sound files are in my M2 with the correct 2 build prop edits. Also using all z5 sound libs, if you don't wanna use it find try and find another I was the first and only one to get S-Force working on the m2.
D2303 18.6.A.0.182 5.1 deodexed z2 port+z5 apps,be2,xr,sv,ad,nuts t2u dual recovery,xposed,S-Force,xLOUD,z5 cam2±libs,seeder, +more....
[email protected] said:
That's as good as it gets the earpiece speaker is to small to take it working in full stereo mode like z3/m4a it wouldn't last a week the sound does come out of the earpiece I checked, it doubles the output of sound compared to stock, all the correct S-Force surround sound files are in my M2 with the correct 2 build prop edits. Also using all z5 sound libs, if you don't wanna use it find try and find another I was the first and only one to get S-Force working on the m2.
D2303 18.6.A.0.182 5.1 deodexed z2 port+z5 apps,be2,xr,sv,ad,nuts t2u dual recovery,xposed,S-Force,xLOUD,z5 cam2±libs,seeder, +more....
Click to expand...
Click to collapse
I mean does it really outpouts at least some sound from the Ear speaker? Cause I checked and nothing happens. Can you send me these z5 libs you've mentioned? Thanks in advance
Anyone successfully installed a working Viper4android sound mod? Tried it bit it produces an awful effect on speakers.
I tried it too and it doesn't make the speakers sound good. Maybe because of Stereo Speakers ?
Maybe it's because our xperia xz's equalizer and audio tweaks are having conflict on viper4android. I observed that when it works the bass doesn't seem right, when i adjust the default equalizer then viper4android stops working.
YoungFiire said:
I tried it too and it doesn't make the speakers sound good. Maybe because of Stereo Speakers ?
Click to expand...
Click to collapse
Hi i tried installing the google play version of viper4android and freezing the equalizer and musicfx via titanium backup.. Now its sounds way better than the official viper4android.