Kies stuck when trying to install OTA - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hi folks,
i have a new 10.1/N8031 with 4.1.2
So i just installed Kies on my PC and for fun i connected my Note. Recognized my Note, telling me there is a minor update of my 4.1.2. Accepted the download, after that my Note changes into Download mode and there it stays. Kies stays in 0.00% and nothing goes on. Some ideas?

Thomas_BA said:
Hi folks,
i have a new 10.1/N8031 with 4.1.2
So i just installed Kies on my PC and for fun i connected my Note. Recognized my Note, telling me there is a minor update of my 4.1.2. Accepted the download, after that my Note changes into Download mode and there it stays. Kies stays in 0.00% and nothing goes on. Some ideas?
Click to expand...
Click to collapse
I do not really use kies but there is a Recovery option in Maybe under advanced. I do not have it installed on my Computer right now to look as it messes with the Drivers for Nexus 7 tablet.
It could be anything from bad download bad cable Or your firmware was modified before. You may try to reflash it or download a image and flash with odin ...
Search this forum for stuck in download mode.

Yes it was a USB port problem.

Related

Odin not show my phone

Hi,
I've download Odin 1.85 and two more files coming with which is Odin3.ini & u1_02_20110310_emmc_EXT4.pit
I let my phone into downloading mode.... and there is sound that pc detect usb but Odin still not show anything.
I'm using direct usb and tried another port but still same. I reinstall and install back until pc show driver is ready to use in green color still not find mine even beep sound is normal. All my port is ok, tested with other gadget and is working.
Please help me. Before it happen, I at rom Gamerz and trying to flash with [ROM][A8][4.2.2] remICS-JB [V6][02/08/13] ~STABLE~
So, it just hang at logo and cannot enter recovery, either. I also download heimdall still no luck. I re and install kies and it says "device is connect to pc" means no issue at all with usb but why odin not found.....
Please help
exz8 said:
Hi,
I've download Odin 1.85 and two more files coming with which is Odin3.ini & u1_02_20110310_emmc_EXT4.pit
I let my phone into downloading mode.... and there is sound that pc detect usb but Odin still not show anything.
I'm using direct usb and tried another port but still same. I reinstall and install back until pc show driver is ready to use in green color still not find mine even beep sound is normal. All my port is ok, tested with other gadget and is working.
Please help me. Before it happen, I at rom Gamerz and trying to flash with [ROM][A8][4.2.2] remICS-JB [V6][02/08/13] ~STABLE~
So, it just hang at logo and cannot enter recovery, either. I also download heimdall still no luck. I re and install kies and it says "device is connect to pc" means no issue at all with usb but why odin not found.....
Please help
Click to expand...
Click to collapse
disable all kies services than run odin....CMIIW...
deDante said:
disable all kies services than run odin....CMIIW...
Click to expand...
Click to collapse
done, even uninstall completely but no change.....
okay... turn on internet on your pc and then connect your phone in download mode.. pc will download required files automatically.. and i hope usb debuging mode was on while you connected before. .
let me know if it worked and only then hits thanks orelse dont

[Q] brick ??!

Hi everyone,
I have currently some big issue with my GT-N8010.
My custom rom wasn't running very well so I decided to reset my tablet and go back to a new fresh installation.
I downloaded the latest firmware of the tablet on sammobile and started to update it with Odin PC, but in the middle of the transfert I got an error and now my tablet is stuck on the "Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.".
I have no idea how to fix it! And I can't go back to download mode anymore. On top of that, my tablet seems not to be recognize by my computer (I tried to install Kies and the samsung usb driver several times but it keeps saying that's the driver is not ok)...
Can someone help me please ?
Thank you in advance!
What custom rom did you had ? 4.4.2 or 4.1.2 ?
KoRoZIV said:
What custom rom did you had ? 4.4.2 or 4.1.2 ?
Click to expand...
Click to collapse
It was a 4.1.2 (HD Revolution) and I tried to flash with odin the N8010XXUCMK2_N8010XSACNA2_XSA
First uninstall kies and all usb drivers. Restart your computer.
If you can get in download mode (power+volume down then volume up when asked) :
Install some drivers from the sticky topics here on xda. Download the firmware again from another location if possible. Use a different usb port.
If you can't get in download mode, you have to try with kies. I never had success whit it, and i really need it. But it says that n8010 does not support initializing or something like that. Maybe someone else can help with kies.
Sent from my GT-N8010 using Tapatalk
I don't know where it comes from...
I tried everything, uninstall/reinstall Kies/Usb driver, put a VM with Win7 (As I am under Windows 8.1), put Win7 in dual boot to maybe fix the compatibility issue but nothing seems to work! And of course I don't have any other computer to use...
That's maybe the reason the tablet get broken as I used to use Odin on another PC and I didn't check if the usb driver was installed on this one??
I just know that Odin recognized my tablet so I was able to launch the installation of the new firmware.
I feel really bad...Hope the tablet is not definitly dead!
Faulty USB cable perhaps ?
Sent from my GT-N8010 using Tapatalk
Ok so I went to a Samsung store and they told me that I have to send my tablet to the repair center in the country where I bought the device.
It's a big issue for me as I am now living in Australia and my tablet has been bought in France.
On top of that the guy from Samsung explained me that now it's normal if my tablet is not any longer recognize by my computer...
I heard about JTAG, I don't have any idea about the subject but may it fix my problem?
Does someone know how samsung is able to fix the tablet, so I may fix it myself instead of sending to them...?

[Q] FIrmware upgrade encountered an issue

Hi All,
I'm hoping someone can help me with my non-rooted Samsung Galaxy Tab 2 10.1 Tablet (GT-P110). The tablet won't go into download or recovery mode, and it's saying "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again". I've tried using Kies, but it's not recognising the device.
I've downloaded Odin 3.09 and a stock ROM from Samsung Updates. When I go to flash the ROM via ODIN it fails at around the 60-70% mark. I've tried a different stock ROM, but the same thing happens.
Is there anything else I could try?
Many Thanks...
GalaxyTabTwo said:
Hi All,
I'm hoping someone can help me with my non-rooted Samsung Galaxy Tab 2 10.1 Tablet (GT-P110). The tablet won't go into download or recovery mode, and it's saying "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again". I've tried using Kies, but it's not recognising the device.
I've downloaded Odin 3.09 and a stock ROM from Samsung Updates. When I go to flash the ROM via ODIN it fails at around the 60-70% mark. I've tried a different stock ROM, but the same thing happens.
Is there anything else I could try?
Many Thanks...
Click to expand...
Click to collapse
Try a different cable if possible, different pc/laptop and go to samsung website and download drivers for your tablet model. Sometimes Kies doesn't do a good job with drivers.
Try rebooting tablet and connecting it right away to pc/laptop.
Good luck.
Pp.
PanchoPlanet said:
Try a different cable if possible, different pc/laptop and go to samsung website and download drivers for your tablet model. Sometimes Kies doesn't do a good job with drivers.
Try rebooting tablet and connecting it right away to pc/laptop.
Good luck.
Pp.
Click to expand...
Click to collapse
I have tried a different cable, laptop and downloaded the drivers from the Samsung website, but I was still stuck with the same problem. I tried using Odin 3.07 and this got me further than before. It went through the flash process and I then got the blue reset message. The problem is that the tablet doesn't reset and just goes to a black screen. When I try to manually reset the tablet it comes back with the same message "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again"
Has anyone got any other suggestions I could try?
Many Thanks...
I've had the exact same issue before and in my case simply removing the external sd card before flashing with Odin solved the problem.
Sent from my SGH-M919 using Tapatalk 2
I never thought of that because I keep a nandroid copy on my external SD, so I always pull it from my phone or tablet when flashing /reset just to be safe. Doesn't everyone do that?
Pp.

N8010 Problems

Hi,
Figured id start off by explaining the history on my Samsung Note N8010
A while back i installed Hyperdrive Rom RS8 (i think), no problems, flawless. However it did change my device id to an N8013, not sure why.
Recently i wanted to use SkyGo Tablet app, however root cloak and Voodoo does not cloak SkyGo Tablet app on this specific rom so i figured id revert back to the original 4.1.2 stock.
I used Mobile Odin, grabbed the zip/tar from the Sam-mobile and hit go.
On reboot, it would not load in, stuck on the Samsung Note 10.1 splash. I do have access to download mode and recovery mode, but it's labelled Android System Reocvery <3e>.
It is worth noting that USB debug did not work on Hyperdrive, so currently no matter what computer i connect this tablet to Odin, Kies or anything will not see it.
When trying to "apply update from sd card" i get E:\ mount problems, it pretty much fails every time.
Any suggestions?
kitchenspoon said:
Hi,
Figured id start off by explaining the history on my Samsung Note N8010
A while back i installed Hyperdrive Rom RS8 (i think), no problems, flawless. However it did change my device id to an N8013, not sure why.
Recently i wanted to use SkyGo Tablet app, however root cloak and Voodoo does not cloak SkyGo Tablet app on this specific rom so i figured id revert back to the original 4.1.2 stock.
I used Mobile Odin, grabbed the zip/tar from the Sam-mobile and hit go.
On reboot, it would not load in, stuck on the Samsung Note 10.1 splash. I do have access to download mode and recovery mode, but it's labelled Android System Reocvery <3e>.
It is worth noting that USB debug did not work on Hyperdrive, so currently no matter what computer i connect this tablet to Odin, Kies or anything will not see it.
When trying to "apply update from sd card" i get E:\ mount problems, it pretty much fails every time.
Any suggestions?
Click to expand...
Click to collapse
The original issue is probably one of two things. If you downloaded the rom directly to your device its Likely a bad download. DID YOU CHECK MD5 Before flashing. There are also limitations to Mobile odin.
What i would suggest is to uninstall Kies . Make sure you have no other android devices installed on your computer .Download the older version again from Samsung website. Install on your computer. Download odin again i think you want the one a version back as well NOT Latest.
Reboot into download mode. Run odin. if it still does not see your device check Device manager and see if its showing up with a yellow mark. Look for a post i made last week explaining how to correct usb driver for windows.. Download mode should work with out usb debug on if i remember correctly..
erica_renee said:
The original issue is probably one of two things. If you downloaded the rom directly to your device its Likely a bad download. DID YOU CHECK MD5 Before flashing. There are also limitations to Mobile odin.
What i would suggest is to uninstall Kies . Make sure you have no other android devices installed on your computer .Download the older version again from Samsung website. Install on your computer. Download odin again i think you want the one a version back as well NOT Latest.
Reboot into download mode. Run odin. if it still does not see your device check Device manager and see if its showing up with a yellow mark. Look for a post i made last week explaining how to correct usb driver for windows.. Download mode should work with out usb debug on if i remember correctly..
Click to expand...
Click to collapse
Hi, cheers for the response,
I have tried all of what you have said but unfortunately no PC will see my device, not even an "unrecognized device". I have access to android system reocvery <e3> and Download mode (Odin) but the pc just won't recognized, tried new leads and so forth, nothing.

Screwed something up, HELP needed please

Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse
Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.

Categories

Resources